Hi Mark,
I switched to Xen2.0 with linux 2.4.27 kernel for dom0
now I create the virtual disk in the same way as I described below.
now when I try to boot another domain i see problems with DHCP. below are
the logs
Using config file "/etc/xen/dom1".
Started domain ExampleDomain, console on port 9609
************ REMOTE CONSOLE: CTRL-] TO QUIT ********
Linux version 2.4.27-xenU (root@andrea) (gcc version 3.1.1) #3 Tue Oct 19
13:56:24 EDT 2004
On node 0 totalpages: 16384
zone(0): 4096 pages.
zone(1): 12288 pages.
zone(2): 0 pages.
Kernel command line: ip=:1.2.3.4::::eth0:dhcp root=/dev/hda1 ro 4
Initializing CPU#0
Xen reported: 2193.379 MHz processor.
Calibrating delay loop... 4404.01 BogoMIPS
Memory: 62768k/65536k available (1341k kernel code, 2768k reserved, 267k
data, 60k init, 0k highmem)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
CPU: L1 I cache: 12K, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Intel(R) Pentium(R) 4 CPU 2.20GHz stepping 04
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
Event-channel device installed.
Xen virtual console successfully installed as tty
Starting Xen Balloon driver
pty: 256 Unix98 ptys configured
[XEN] Initialising virtual block device driver
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
[XEN] Initialising virtual ethernet driver.
[XEN] Netfront recovered tx=0 rxfree=0
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
Sending DHCP requests ....... timed out
Here Sending DHCP requests keep timing out and it keeps retrying. so boot
doesn't proceed beyond this point.
Can anybody please let me know what I might be doing wrong.
Thanks,
Sanjay
----------------------------------
http://www.cc.gatech.edu/~ksanjay/
On Mon, 18 Oct 2004, M.A. Williamson wrote:
> > Hi Folks,
> > I am using xen1.2.
> > I create the disk image as described in the Xen2.0 user manual chapter 5.
>
> Sorry but that won't work :-(
>
> Xen 1.2 can only export sections of physical disks (e.g. partitions, whole
> disks, or Xen Virtual Disks) to other domains. If you want to store
> filesystems in disk files, you should move to Xen 2.0-beta (soon to be Xen
> 2.0-release).
>
> The nearest you can get on Xen 1.2 is to create a Virtual Disk and then use
> that. Tying yourself to 1.2 is probably not a good idea though - Virtual
> Disks aren't supported by 2.0. We'd certainly prefer people to move to 2.0
> now - it's stable and virtually release-ready and has a whole load of new
> features, improved tools and better hardware support.
>
> A good way to install a new domain's filesystem is using debootstrap (as
> described in the appendix of the manual).
>
> Let us know how you get on.
>
> HTH,
> Mark
>
> > #dd if=/dev/zero of=vm1disk bs=1k seek=6144k count=1
> > #losetup /dev/loop1 vm1disk
> > #mkfs -t ext3 /dev/loop1
> > #mount /dev/loop1 /mnt
> >
> > #cp -ax /<directory>/ /mnt/ /* I do this instead of copying the
> > whole / directory because I don't want some of the directories in Dom 1 */
> >
> > I modify /mnt/etc/fstab to put /dev/sda1 to root
> >
> > # umount /dev/loop1
> >
> > then I put this line in /etc/xc/defaults (I used a copy of it called
> > dom1)
> >
> > vbd_list = [ ('phy:loop1','sda1','w' ) ]
> >
> >
> > After this I try to create the dom1 by saying but I get an error.
> >
> > #xc_dom_create.py -D vmid=1 -f dom1
> > Parsing config file 'dom1'
> > VM image : "/boot/xenolinux.gz"
> > VM ramdisk : ""
> > VM memory (MB) : "64"
> > VM IP address(es) : "130.207.98.36; 169.254.1.1"
> > VM block device(s) : "phy:loop1,sda1,w"
> > VM cmdline :
> > "ip=130.207.98.36:169.254.1.0:130.207.98.1:255.255.255.0::eth0:off
> > root=/dev/sda1 ro 4 VMID=1 usr=/dev/sda6"
> > Error looking up phy:loop1
> >
> >
> > Can someone please help me with this error?
> >
> > Thanks,
> > Sanjay
> >
> >
> >
> >
> >
> > ------------------------------------------------------- This SF.net
> > email is sponsored by: IT Product Guide on ITManagersJournal Use IT
> > products in your business? Tell us what you think of them. Give us Your
> > Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
> > http://productguide.itmanagersjournal.com/guidepromo.tmpl
> > _______________________________________________ Xen-devel mailing list
> > Xen-devel@xxxxxxxxxxxxxxxxxxxxx
> > https://lists.sourceforge.net/lists/listinfo/xen-devel
>
-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/xen-devel
|
Home