[Xen-users] Re: Xen issue (panic ?) on newer hardware

I answer to myself :

With the "debian" kernel, aka 2.6.32-38 :

The latest xen 4.1.2 hypervisor works.
The latest xen 4.0.3 failed, same error as the debian hypervisor.

I tried the latest 4.0.3 with the latest 2.6.32 from jeremy repository also failed.

What could be wrong with the xen 4.0 branch ?
Is there some hardware compatibility support not backported to xen 4.0 ?

Regards

Olivier

Le 25/10/2011 17:38, Olivier Hanesse a écrit :

Hello,

I am using Debian squeeze distro:

So I am using :

ii linux-image-2.6.32-5-xen-amd64 2.6.32-38 Linux 2.6.32 for 64-bit PCs, Xen dom0 support

ii xen-hypervisor-4.0-amd64 4.0.1-2 The Xen Hypervisor on AMD64

I am trying to install xen on a brand new IBM x3550 M3 (got no issue on older hardware) :

CPU is

vendor_id : GenuineIntel

cpu family : 6

model : 44

model name : Intel(R) Xeon(R) CPU X5675 @ 3.07GHz

stepping : 2

cpu MHz : 3066.811

cache size : 12288 KB

physical id : 1

siblings : 12

core id : 10

cpu cores : 6

apicid : 53

initial apicid : 53

fpu : yes

fpu_exception : yes

cpuid level : 11

wp : yes

flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm dca sse4_1 sse4_2 popcnt aes lahf_lm arat tpr_shadow vnmi flexpriority ept vpid

bogomips : 6133.55

clflush size : 64

cache_alignment : 64

address sizes : 40 bits physical, 48 bits virtual

power management:

I can see several errors in boot log, but I don't know which ones are the most relevant :

[ 8.007449] CPU: L1 I cache: 32K, L1 D cache: 32K

[ 8.007557] CPU: L2 cache: 256K

[ 8.007621] CPU: L3 cache: 12288K

[ 8.007687] CPU 0/0x0 -> Node 0

[ 8.007751] CPU: Unsupported number of siblings 32

[ 8.007942] Performance Events: unsupported p6 CPU model 44 no PMU driver, software events only.

[ 8.080161] ERROR: Unable to locate IOAPIC for GSI 9

Here is my full log :

(XEN) Xen version 4.0.1 (Debian 4.0.1-2) (waldi@xxxxxxxxxx) (gcc version 4.4.5 (Debian 4.4.5-10) ) Wed Jan 12 14:04:06 UTC 2011

(XEN) Bootloader: GRUB 1.98+20100804-14

(XEN) Command line: placeholder dom0_mem=2048M console=vga,com1 com1=19200,8n1 loglvl=all guest_loglvl=all dom0_max_vcpus=1 dom0_vcpus_pin

(XEN) Video information:

(XEN) VGA is text mode 80x25, font 8x16

(XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds

(XEN) EDID info not retrieved because no DDC retrieval method detected

(XEN) Disc information:

(XEN) Found 2 MBR signatures

(XEN) Found 2 EDD information structures

(XEN) Xen-e820 RAM map:

(XEN) 0000000000000000 - 000000000009c000 (usable)

(XEN) 000000000009c000 - 00000000000a0000 (reserved)

(XEN) 00000000000e0000 - 0000000000100000 (reserved)

(XEN) 0000000000100000 - 000000007cc70000 (usable)

(XEN) 000000007cc70000 - 000000007cd34000 (reserved)

(XEN) 000000007cd34000 - 000000007d641000 (usable)

(XEN) 000000007d641000 - 000000007d6f1000 (reserved)

(XEN) 000000007d6f1000 - 000000007f68f000 (usable)

(XEN) 000000007f68f000 - 000000007f6df000 (reserved)

(XEN) 000000007f6df000 - 000000007f7df000 (ACPI NVS)

(XEN) 000000007f7df000 - 000000007f7ff000 (ACPI data)

(XEN) 000000007f7ff000 - 000000007f800000 (usable)

(XEN) 000000007f800000 - 0000000090000000 (reserved)

(XEN) 00000000fc000000 - 00000000fd000000 (reserved)

(XEN) 00000000fed1c000 - 00000000fed20000 (reserved)

(XEN) 00000000ff800000 - 0000000100000000 (reserved)

(XEN) 0000000100000000 - 0000000680000000 (usable)

(XEN) ACPI: RSDP 000FDFD0, 0024 (r2 IBM )

(XEN) ACPI: XSDT 7F7FE120, 0084 (r1 IBM THURLEY 0 1000013)

(XEN) ACPI: FACP 7F7FB000, 00F4 (r4 IBM THURLEY 0 IBM 1000013)

(XEN) ACPI: DSDT 7F7F8000, 2C3E (r1 IBM THURLEY 3 IBM 1000013)

(XEN) ACPI: FACS 7F6EC000, 0040

(XEN) ACPI: TCPA 7F7FD000, 0064 (r0 0 0)

(XEN) ACPI: APIC 7F7F7000, 011E (r2 IBM THURLEY 0 IBM 1000013)

(XEN) ACPI: MCFG 7F7F6000, 003C (r1 IBM THURLEY 1 IBM 1000013)

(XEN) ACPI: SLIC 7F7F5000, 0176 (r1 IBM THURLEY 0 IBM 1000013)

(XEN) ACPI: HPET 7F7F4000, 0038 (r1 IBM THURLEY 1 IBM 1000013)

(XEN) ACPI: SRAT 7F7F3000, 0228 (r2 IBM THURLEY 1 IBM 1000013)

(XEN) ACPI: SLIT 7F7F2000, 0030 (r1 IBM THURLEY 0 IBM 1000013)

(XEN) ACPI: SSDT 7F7F1000, 0183 (r2 IBM CPUSCOPE 4000 IBM 1000013)

(XEN) ACPI: SSDT 7F7F0000, 0699 (r2 IBM CPUWYVRN 4000 IBM 1000013)

(XEN) ACPI: SSDT 7F7E9000, 638C (r2 IBM PSTATEPM 4000 IBM 1000013)

(XEN) ACPI: ERST 7F7E8000, 0230 (r1 IBM THURLEY 1 IBM 1000013)

(XEN) System RAM: 24564MB (25154272kB)

(XEN) SRAT: PXM 0 -> APIC 0 -> Node 0

(XEN) SRAT: PXM 0 -> APIC 2 -> Node 0

(XEN) SRAT: PXM 0 -> APIC 4 -> Node 0

(XEN) SRAT: PXM 0 -> APIC 16 -> Node 0

(XEN) SRAT: PXM 0 -> APIC 18 -> Node 0

(XEN) SRAT: PXM 0 -> APIC 20 -> Node 0

(XEN) SRAT: PXM 1 -> APIC 32 -> Node 1

(XEN) SRAT: PXM 1 -> APIC 34 -> Node 1

(XEN) SRAT: PXM 1 -> APIC 36 -> Node 1

(XEN) SRAT: PXM 1 -> APIC 48 -> Node 1

(XEN) SRAT: PXM 1 -> APIC 50 -> Node 1

(XEN) SRAT: PXM 1 -> APIC 52 -> Node 1

(XEN) SRAT: PXM 0 -> APIC 1 -> Node 0

(XEN) SRAT: PXM 0 -> APIC 3 -> Node 0

(XEN) SRAT: PXM 0 -> APIC 5 -> Node 0

(XEN) SRAT: PXM 0 -> APIC 17 -> Node 0

(XEN) SRAT: PXM 0 -> APIC 19 -> Node 0

(XEN) SRAT: PXM 0 -> APIC 21 -> Node 0

(XEN) SRAT: PXM 1 -> APIC 33 -> Node 1

(XEN) SRAT: PXM 1 -> APIC 35 -> Node 1

(XEN) SRAT: PXM 1 -> APIC 37 -> Node 1

(XEN) SRAT: PXM 1 -> APIC 49 -> Node 1

(XEN) SRAT: PXM 1 -> APIC 51 -> Node 1

(XEN) SRAT: PXM 1 -> APIC 53 -> Node 1

(XEN) SRAT: Node 0 PXM 0 0-80000000

(XEN) SRAT: Node 0 PXM 0 100000000-380000000

(XEN) SRAT: Node 1 PXM 1 380000000-680000000

(XEN) NUMA: Using 19 for the hash shift.

(XEN) Domain heap initialised DMA width 31 bits

(XEN) found SMP MP-table at 0009c140

(XEN) DMI 2.5 present.

(XEN) Using APIC driver default

(XEN) ACPI: PM-Timer IO Port: 0x588

(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[584,0], pm1x_evt[580,0]

(XEN) ACPI: wakeup_vec[7f6ec00c], vec_size[20]

(XEN) ACPI: Local APIC address 0xfee00000

(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)

(XEN) Processor #0 6:12 APIC version 21

(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)

(XEN) Processor #2 6:12 APIC version 21

(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)

(XEN) Processor #4 6:12 APIC version 21

(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x10] enabled)

(XEN) Processor #16 6:12 APIC version 21

(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x12] enabled)

(XEN) Processor #18 6:12 APIC version 21

(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)

(XEN) Processor #20 6:12 APIC version 21

(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x20] enabled)

(XEN) Processor #32 6:12 APIC version 21

(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x22] enabled)

(XEN) Processor #34 6:12 APIC version 21

(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x24] enabled)

(XEN) Processor #36 6:12 APIC version 21

(XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x30] enabled)

(XEN) Processor #48 6:12 APIC version 21

(XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x32] enabled)

(XEN) Processor #50 6:12 APIC version 21

(XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x34] enabled)

(XEN) Processor #52 6:12 APIC version 21

(XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x01] enabled)

(XEN) Processor #1 6:12 APIC version 21

(XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x03] enabled)

(XEN) Processor #3 6:12 APIC version 21

(XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x05] enabled)

(XEN) Processor #5 6:12 APIC version 21

(XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x11] enabled)

(XEN) Processor #17 6:12 APIC version 21

(XEN) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x13] enabled)

(XEN) Processor #19 6:12 APIC version 21

(XEN) ACPI: LAPIC (acpi_id[0x11] lapic_id[0x15] enabled)

(XEN) Processor #21 6:12 APIC version 21

(XEN) ACPI: LAPIC (acpi_id[0x12] lapic_id[0x21] enabled)

(XEN) Processor #33 6:12 APIC version 21

(XEN) ACPI: LAPIC (acpi_id[0x13] lapic_id[0x23] enabled)

(XEN) Processor #35 6:12 APIC version 21

(XEN) ACPI: LAPIC (acpi_id[0x14] lapic_id[0x25] enabled)

(XEN) Processor #37 6:12 APIC version 21

(XEN) ACPI: LAPIC (acpi_id[0x15] lapic_id[0x31] enabled)

(XEN) Processor #49 6:12 APIC version 21

(XEN) ACPI: LAPIC (acpi_id[0x16] lapic_id[0x33] enabled)

(XEN) Processor #51 6:12 APIC version 21

(XEN) ACPI: LAPIC (acpi_id[0x17] lapic_id[0x35] enabled)

(XEN) Processor #53 6:12 APIC version 21

(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])

(XEN) Overriding APIC driver with bigsmp

(XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])

(XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23

(XEN) ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])

(XEN) IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47

(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

(XEN) ACPI: IRQ0 used by override.

(XEN) ACPI: IRQ2 used by override.

(XEN) ACPI: IRQ9 used by override.

(XEN) Enabling APIC mode: Phys. Using 2 I/O APICs

(XEN) ACPI: HPET id: 0x8086a301 base: 0xfed00000

(XEN) PCI: MCFG configuration 0: base 80000000 segment 0 buses 0 - 255

(XEN) PCI: MCFG area at 80000000 reserved in E820

(XEN) Using ACPI (MADT) for SMP configuration information

(XEN) Using scheduler: SMP Credit Scheduler (credit)

(XEN) Detected 3066.812 MHz processor.

(XEN) Initing memory sharing.

(XEN) VMX: Supported advanced features:

(XEN) - APIC MMIO access virtualisation

(XEN) - APIC TPR shadow

(XEN) - Extended Page Tables (EPT)

(XEN) - Virtual-Processor Identifiers (VPID)

(XEN) - Virtual NMI

(XEN) - MSR direct-access bitmap

(XEN) - Unrestricted Guest

(XEN) EPT supports 2MB super page.

(XEN) HVM: ASIDs enabled.

(XEN) HVM: VMX enabled

(XEN) HVM: Hardware Assisted Paging detected.

(XEN) Intel machine check reporting enabled

(XEN) I/O virtualisation disabled

(XEN) Enabled directed EOI with ioapic_ack_old on!

(XEN) Total of 24 processors activated.

(XEN) ENABLING IO-APIC IRQs

(XEN) -> Using old ACK method

(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1

(XEN) TSC is reliable, synchronization unnecessary

(XEN) Platform timer is 14.318MHz HPET

�(XEN) Allocated console ring of 256 KiB.

(XEN) microcode.c:73:d32767 microcode: CPU1 resumed

(XEN) microcode.c:73:d32767 microcode: CPU15 resumed

(XEN) microcode.c:73:d32767 microcode: CPU10 resumed

(XEN) microcode.c:73:d32767 microcode: CPU22 resumed

(XEN) microcode.c:73:d32767 microcode: CPU2 resumed

(XEN) microcode.c:73:d32767 microcode: CPU3 resumed

(XEN) microcode.c:73:d32767 microcode: CPU14 resumed

(XEN) microcode.c:73:d32767 microcode: CPU13 resumed

(XEN) microcode.c:73:d32767 microcode: CPU5 resumed

(XEN) microcode.c:73:d32767 microcode: CPU17 resumed

(XEN) Brought up 24 CPUs

(XEN) microcode.c:73:d32767 microcode: CPU12 resumed

(XEN) microcode.c:73:d32767 microcode: CPU19 resumed

(XEN) microcode.c:73:d32767 microcode: CPU7 resumed

(XEN) microcode.c:73:d32767 microcode: CPU4 resumed

(XEN) microcode.c:73:d32767 microcode: CPU16 resumed

(XEN) microcode.c:73:d32767 microcode: CPU21 resumed

(XEN) microcode.c:73:d32767 microcode: CPU11 resumed

(XEN) microcode.c:73:d32767 microcode: CPU9 resumed

(XEN) microcode.c:73:d32767 microcode: CPU8 resumed

(XEN) microcode.c:73:d32767 microcode: CPU23 resumed

(XEN) microcode.c:73:d32767 microcode: CPU18 resumed

(XEN) microcode.c:73:d32767 microcode: CPU20 resumed

(XEN) microcode.c:73:d32767 microcode: CPU6 resumed

(XEN) ACPI sleep modes: S3

(XEN) mcheck_poll: Machine check polling timer started.

(XEN) *** LOADING DOMAIN 0 ***

(XEN) Xen kernel: 64-bit, lsb, compat32

(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x16b9000

(XEN) PHYSICAL MEMORY ARRANGEMENT:

(XEN) Dom0 alloc.: 0000000238000000->000000023c000000 (507904 pages to be allocated)

(XEN) VIRTUAL MEMORY ARRANGEMENT:

(XEN) Loaded kernel: ffffffff81000000->ffffffff816b9000

(XEN) Init. ramdisk: ffffffff816b9000->ffffffff832e8600

(XEN) Phys-Mach map: ffffffff832e9000->ffffffff836e9000

(XEN) Start info: ffffffff836e9000->ffffffff836e94b4

(XEN) Page tables: ffffffff836ea000->ffffffff83709000

(XEN) Boot stack: ffffffff83709000->ffffffff8370a000

(XEN) TOTAL: ffffffff80000000->ffffffff83800000

(XEN) ENTRY ADDRESS: ffffffff81508200

(XEN) Dom0 has maximum 1 VCPUs

(XEN) Scrubbing Free RAM: .............................................................................................................................................................................................................................done.

(XEN) trace.c:89:d32767 calc_tinfo_first_offset: NR_CPUs 128, offset_in_bytes 258, t_info_first_offset 65

(XEN) Xen trace buffers: disabled

(XEN) Std. Loglevel: All

(XEN) Guest Loglevel: All

(XEN) Xen is relinquishing VGA console.

(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)

(XEN) Freed 176kB init memory.

mapping kernel into physical memory

Xen: setup ISA identity maps

about to get started...

[ 0.000000] Initializing cgroup subsys cpuset

[ 0.000000] Initializing cgroup subsys cpu

[ 0.000000] Linux version 2.6.32-5-xen-amd64 (Debian 2.6.32-38) (ben@xxxxxxxxxxxxxxx) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Oct 3 07:53:54 UTC 2011

[ 0.000000] Command line: placeholder root=/dev/mapper/vg02-root ro console=tty0 console=hvc0

[ 0.000000] KERNEL supported cpus:

[ 0.000000] Intel GenuineIntel

[ 0.000000] AMD AuthenticAMD

[ 0.000000] Centaur CentaurHauls

[ 0.000000] released 0 pages of unused memory

[ 0.000000] BIOS-provided physical RAM map:

[ 0.000000] Xen: 0000000000000000 - 000000000009c000 (usable)

[ 0.000000] Xen: 000000000009c000 - 0000000000100000 (reserved)

[ 0.000000] Xen: 0000000000100000 - 000000007cc70000 (usable)

[ 0.000000] Xen: 000000007cc70000 - 000000007cd34000 (reserved)

[ 0.000000] Xen: 000000007cd34000 - 000000007d641000 (usable)

[ 0.000000] Xen: 000000007d641000 - 000000007d6f1000 (reserved)

[ 0.000000] Xen: 000000007d6f1000 - 000000007f68f000 (usable)

[ 0.000000] Xen: 000000007f68f000 - 000000007f6df000 (reserved)

[ 0.000000] Xen: 000000007f6df000 - 000000007f7df000 (ACPI NVS)

[ 0.000000] Xen: 000000007f7df000 - 000000007f7ff000 (ACPI data)

[ 0.000000] Xen: 000000007f7ff000 - 000000007f800000 (usable)

[ 0.000000] Xen: 000000007f800000 - 0000000090000000 (reserved)

[ 0.000000] Xen: 00000000fc000000 - 00000000fd000000 (reserved)

[ 0.000000] Xen: 00000000fec00000 - 00000000fec01000 (reserved)

[ 0.000000] Xen: 00000000fec80000 - 00000000fec81000 (reserved)

[ 0.000000] Xen: 00000000fed1c000 - 00000000fed20000 (reserved)

[ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved)

[ 0.000000] Xen: 00000000ff800000 - 0000000100000000 (reserved)

[ 0.000000] DMI 2.5 present.

[ 0.000000] last_pfn = 0x7f800 max_arch_pfn = 0x400000000

[ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106

[ 0.000000] init_memory_mapping: 0000000000000000-000000007f800000

[ 0.000000] RAMDISK: 016b9000 - 032e8600

[ 0.000000] ACPI: RSDP 00000000000fdfd0 00024 (v02 IBM )

[ 0.000000] ACPI: XSDT 000000007f7fe120 00084 (v01 IBM THURLEY 00000000 01000013)

[ 0.000000] ACPI: FACP 000000007f7fb000 000F4 (v04 IBM THURLEY 00000000 IBM 01000013)

[ 0.000000] ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20090903/tbfadt-607)

[ 0.000000] ACPI: DSDT 000000007f7f8000 02C3E (v01 IBM THURLEY 00000003 IBM 01000013)

[ 0.000000] ACPI: FACS 000000007f6ec000 00040

[ 0.000000] ACPI: TCPA 000000007f7fd000 00064 (v00 00000000 00000000)

[ 0.000000] ACPI: APIC 000000007f7f7000 0011E (v02 IBM THURLEY 00000000 IBM 01000013)

[ 0.000000] ACPI: MCFG 000000007f7f6000 0003C (v01 IBM THURLEY 00000001 IBM 01000013)

[ 0.000000] ACPI: SLIC 000000007f7f5000 00176 (v01 IBM THURLEY 00000000 IBM 01000013)

[ 0.000000] ACPI: HPET 000000007f7f4000 00038 (v01 IBM THURLEY 00000001 IBM 01000013)

[ 0.000000] ACPI: SRAT 000000007f7f3000 00228 (v02 IBM THURLEY 00000001 IBM 01000013)

[ 0.000000] ACPI: SLIT 000000007f7f2000 00030 (v01 IBM THURLEY 00000000 IBM 01000013)

[ 0.000000] ACPI: SSDT 000000007f7f1000 00183 (v02 IBM CPUSCOPE 00004000 IBM 01000013)

[ 0.000000] ACPI: SSDT 000000007f7f0000 00699 (v02 IBM CPUWYVRN 00004000 IBM 01000013)

[ 0.000000] ACPI: SSDT 000000007f7e9000 0638C (v02 IBM PSTATEPM 00004000 IBM 01000013)

[ 0.000000] ACPI: ERST 000000007f7e8000 00230 (v01 IBM THURLEY 00000001 IBM 01000013)

[ 0.000000] No NUMA configuration found

[ 0.000000] Faking a node at 0000000000000000-000000007f800000

[ 0.000000] Bootmem setup node 0 0000000000000000-000000007f800000

[ 0.000000] NODE_DATA [0000000000008000 - 000000000000ffff]

[ 0.000000] bootmap [0000000000010000 - 000000000001feff] pages 10

[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 007f800000]

[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]

[ 0.000000] #1 [00036ea000 - 0003709000] XEN PAGETABLES ==> [00036ea000 - 0003709000]

[ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]

[ 0.000000] #3 [0001000000 - 0001698b14] TEXT DATA BSS ==> [0001000000 - 0001698b14]

[ 0.000000] #4 [00016b9000 - 00032e8600] RAMDISK ==> [00016b9000 - 00032e8600]

[ 0.000000] #5 [00032e9000 - 00036ea000] XEN START INFO ==> [00032e9000 - 00036ea000]

[ 0.000000] #6 [0001699000 - 00016994d8] BRK ==> [0001699000 - 00016994d8]

[ 0.000000] #7 [0000100000 - 00004dd000] PGTABLE ==> [0000100000 - 00004dd000]

[ 0.000000] #8 [0000001000 - 0000001030] ACPI SLIT ==> [0000001000 - 0000001030]

[ 0.000000] Zone PFN ranges:

[ 0.000000] DMA 0x00000000 -> 0x00001000

[ 0.000000] DMA32 0x00001000 -> 0x00100000

[ 0.000000] Normal 0x00100000 -> 0x00100000

[ 0.000000] Movable zone start PFN for each node

[ 0.000000] early_node_map[5] active PFN ranges

[ 0.000000] 0: 0x00000000 -> 0x0000009c

[ 0.000000] 0: 0x00000100 -> 0x0007cc70

[ 0.000000] 0: 0x0007cd34 -> 0x0007d641

[ 0.000000] 0: 0x0007d6f1 -> 0x0007f68f

[ 0.000000] 0: 0x0007f7ff -> 0x0007f800

[ 0.000000] ACPI: PM-Timer IO Port: 0x588

[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x10] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x12] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x20] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x22] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x24] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x30] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x32] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x34] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x01] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x03] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x05] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x11] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x13] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x15] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x21] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x23] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x25] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x31] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x33] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x35] enabled)

[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])

[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])

[ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-0

[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])

[ 0.000000] IOAPIC[1]: apic_id 9, version 0, address 0xfec80000, GSI 24-24

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9

[ 0.000000] Using ACPI (MADT) for SMP configuration information

[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000

[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs

[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 0000000000100000

[ 0.000000] PM: Registered nosave memory: 000000007cc70000 - 000000007cd34000

[ 0.000000] PM: Registered nosave memory: 000000007d641000 - 000000007d6f1000

[ 0.000000] PM: Registered nosave memory: 000000007f68f000 - 000000007f6df000

[ 0.000000] PM: Registered nosave memory: 000000007f6df000 - 000000007f7df000

[ 0.000000] PM: Registered nosave memory: 000000007f7df000 - 000000007f7ff000

[ 0.000000] Allocating PCI resources starting at 90000000 (gap: 90000000:6c000000)

[ 0.000000] Booting paravirtualized kernel on Xen

[ 0.000000] Xen version: 4.0.1 (preserve-AD) (dom0)

[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1

[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880003740000 s90328 r8192 d24360 u122880

[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u122880 alloc=30*4096

[ 0.000000] pcpu-alloc: [0] 0

[ 7.938267] Xen: using vcpu_info placement

[ 7.938271] Built 1 zonelists in Node order, mobility grouping on. Total pages: 513268

[ 7.938273] Policy zone: DMA32

[ 7.938275] Kernel command line: placeholder root=/dev/mapper/vg02-root ro console=tty0 console=hvc0

[ 7.938299] PID hash table entries: 4096 (order: 3, 32768 bytes)

[ 7.938528] Initializing CPU#0

[ 7.946279] DMA: Placing 64MB software IO TLB between ffff88000571a000 - ffff88000971a000

[ 7.946283] DMA: software IO TLB at phys 0x571a000 - 0x971a000

[ 7.946284] xen_swiotlb_fixup: buf=ffff88000571a000 size=67108864

[ 7.962460] xen_swiotlb_fixup: buf=ffff88000977a000 size=32768

[ 7.969455] Memory: 1946660k/2088960k available (3149k kernel code, 3360k absent, 138940k reserved, 1906k data, 604k init)

[ 7.969486] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1

[ 7.969502] Hierarchical RCU implementation.

[ 7.969507] NR_IRQS:4352 nr_irqs:512

[ 7.969605] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[ 7.969608] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

[ 7.969610] xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1

[ 7.969613] xen_allocate_pirq: returning irq 9 for gsi 9

[ 7.969620] xen: acpi sci 9

[ 7.977817] Console: colour VGA+ 80x25

[ 7.987678] console [tty0] enabled

[ 8.005449] console [hvc0] enabled

[ 8.005533] installing Xen timer for CPU 0

[ 8.005619] Detected 3066.812 MHz processor.

[ 8.005688] Calibrating delay loop (skipped), value calculated using timer frequency.. 6133.62 BogoMIPS (lpj=12267248)

[ 8.005834] Security Framework initialized

[ 8.005902] SELinux: Disabled at boot.

[ 8.006237] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)

[ 8.006721] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)

[ 8.006933] Mount-cache hash table entries: 256

[ 8.007093] Initializing cgroup subsys ns

[ 8.007159] Initializing cgroup subsys cpuacct

[ 8.007226] Initializing cgroup subsys devices

[ 8.007293] Initializing cgroup subsys freezer

[ 8.007359] Initializing cgroup subsys net_cls

[ 8.007449] CPU: L1 I cache: 32K, L1 D cache: 32K

[ 8.007557] CPU: L2 cache: 256K

[ 8.007621] CPU: L3 cache: 12288K

[ 8.007687] CPU 0/0x0 -> Node 0

[ 8.007751] CPU: Unsupported number of siblings 32

[ 8.007804] mce: CPU supports 9 MCE banks

[ 8.007942] Performance Events: unsupported p6 CPU model 44 no PMU driver, software events only.

[ 8.015392] SMP alternatives: switching to UP code

[ 8.034769] Freeing SMP alternatives: 28k freed

[ 8.034842] ACPI: Core revision 20090903

[ 8.042268] Brought up 1 CPUs

[ 8.042410] devtmpfs: initialized

[ 8.045055] Grant table initialized

[ 8.045120] regulator: core version 0.5

[ 8.045218] NET: Registered protocol family 16

[ 8.045397] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it

[ 8.045485] ACPI: bus type pci registered

[ 8.045799] PCI: MCFG configuration 0: base 80000000 segment 0 buses 0 - 255

[ 8.045870] PCI: MCFG area at 80000000 reserved in E820

[ 8.078883] PCI: Using MMCONFIG at 80000000 - 8fffffff

[ 8.078951] PCI: Using configuration type 1 for base access

[ 8.079421] bio: create slab <bio-0> at 0

[ 8.080161] ERROR: Unable to locate IOAPIC for GSI 9

[ 8.089844] ACPI: Interpreter enabled

[ 8.089910] ACPI: (supports S0 S1 S5)

[ 8.090112] ACPI: Using IOAPIC for interrupt routing

[ 8.095530] ACPI: No dock devices found.

[ 8.095807] ACPI: PCI Root Bridge [PCI0] (0000:00)

[ 8.096051] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold

[ 8.096123] pci 0000:00:00.0: PME# disabled

[ 8.096294] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold

[ 8.096369] pci 0000:00:01.0: PME# disabled

[ 8.096542] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold

[ 8.096612] pci 0000:00:02.0: PME# disabled

[ 8.096785] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold

[ 8.096857] pci 0000:00:03.0: PME# disabled

[ 8.097034] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold

[ 8.097106] pci 0000:00:07.0: PME# disabled

[ 8.099065] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold

[ 8.099138] pci 0000:00:1a.7: PME# disabled

[ 8.099301] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold

[ 8.099372] pci 0000:00:1c.0: PME# disabled

[ 8.099535] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold

[ 8.099607] pci 0000:00:1c.4: PME# disabled

[ 8.100138] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold

[ 8.100209] pci 0000:00:1d.7: PME# disabled

[ 8.100963] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold

[ 8.101034] pci 0000:0b:00.0: PME# disabled

[ 8.101252] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold

[ 8.101325] pci 0000:0b:00.1: PME# disabled

[ 8.101645] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold

[ 8.101722] pci 0000:10:00.0: PME# disabled

[ 8.101943] pci 0000:10:00.1: PME# supported from D0 D3hot D3cold

[ 8.102016] pci 0000:10:00.1: PME# disabled

[ 8.102678] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold

[ 8.102750] pci 0000:06:00.0: PME# disabled

[ 8.103253] pci 0000:00:1e.0: transparent bridge

(XEN) PCI add device 00:00.0

(XEN) PCI add device 00:01.0

(XEN) PCI add device 00:02.0

(XEN) PCI add device 00:03.0

(XEN) PCI add device 00:07.0

(XEN) PCI add device 00:10.0

(XEN) PCI add device 00:10.1

(XEN) PCI add device 00:11.0

(XEN) PCI add device 00:11.1

(XEN) PCI add device 00:14.0

(XEN) PCI add device 00:14.1

(XEN) PCI add device 00:14.2

(XEN) PCI add device 00:14.3

(XEN) PCI add device 00:15.0

(XEN) PCI add device 00:16.0

(XEN) PCI add device 00:16.1

(XEN) PCI add device 00:16.2

(XEN) PCI add device 00:16.3

(XEN) PCI add device 00:16.4

(XEN) PCI add device 00:16.5

(XEN) PCI add device 00:16.6

(XEN) PCI add device 00:16.7

(XEN) PCI add device 00:1a.0

(XEN) PCI add device 00:1a.1

(XEN) PCI add device 00:1a.7

(XEN) PCI add device 00:1c.0

(XEN) PCI add device 00:1c.4

(XEN) PCI add device 00:1d.0

(XEN) PCI add device 00:1d.1

(XEN) PCI add device 00:1d.2

(XEN) PCI add device 00:1d.7

(XEN) PCI add device 00:1e.0

(XEN) PCI add device 00:1f.0

(XEN) PCI add device 00:1f.2

(XEN) PCI add device 00:1f.3

(XEN) PCI add device 00:1f.5

(XEN) PCI add device 0b:00.0

(XEN) PCI add device 0b:00.1

(XEN) PCI add device 10:00.0

(XEN) PCI add device 10:00.1

(XEN) PCI add device 01:00.0

(XEN) PCI add device 06:00.0

(XEN) PCI add device 07:00.0

[ 8.113653] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)

[ 8.114422] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)

[ 8.115196] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)

[ 8.115976] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)

[ 8.116769] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.

[ 8.117644] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)

[ 8.118441] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)

[ 8.119246] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.

[ 8.120015] x(XEN) Resetting with ACPI MEMORY or I/O RESET_REG.

I tried to boot with pci=nomsi, without success.

Any ideas ?

Should I send this boot log also to xen-devel ?

Regards

Olivier

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

WARNING - OLD ARCHIVES

xen-users

[Xen-users] Re: Xen issue (panic ?) on newer hardware