On Mon, Jul 25, 2011 at 04:24:10PM -0400, jim burns wrote:
> On Mon July 25 2011 3:57:23 PM Pasi wrote:
> > On Mon, Jul 25, 2011 at 03:48:18PM -0400, jim burns wrote:
> > > Hi, Pasi! Long time no 'see'.
> > indeed! If you're going to XenSummit next week we can see for real! :)
>
> I wasn't even paying attention this year to where it's being held. I got
> discouraged in previous years at it being held in european locations, which
> is
> well beyond my means. :)
>
Yeah XenSummit 2011 NA is in Santa Clara, CA, USA:
http://xen.org/community/xensummit.html
I think usually XenSummit has been either in North America or in Asia.
> > > I'm not even close to being on 'current' hardware. On 2.6.32, I get
> > > about 120Mb/s recv rate to the domu, which is fine with me. We had this
> > > discussion a couple of years ago, when I was subscribed. Same hardware
> > > as then.
>
> > Just to verify.. you mean 120 Mbit/sec? (which is pretty slow..)
>
> Yep! That's what you get with an Intel Core2 T5600 @ 1.83GHz. We talked at
> length about my performance when I was providing benchmarks for each early
> version of James' gplpv drivers, and how performance was definitely software
> limited. I'm only interested in relative differences between one platfom and
> another, changing one thing at a time. In this case, gplpv, and my winxp
> config, are the same, but the dom0 is different. Going from 120Mb/s (2.6.32)
> to 20-40 Mb/s (3.0.0), and then hanging is a definite *relative* difference!
> I'm not even concerned about the speed slowdown - just the hang. Hence, I'll
> provide James with the tcpdump when I get more time in a few days.
>
> Talk to you later.
Ok. I'm curious to track down why you get such a slow performance..
Your hardware seems decent. It could be some offloading setting
in dom0 causing trouble.. (buggy nic driver perhaps?)
If you're willing to investigate more, let me/us know :)
-- Pasi
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|