| |
|
 |
|
 |
|
|
|
| |
|
|
xen-users
Re: [Xen-users] Bonded interfaces with trunk and iscsi SAN
On 2/16/2011 4:05 PM, Fajar A. Nugraha wrote:
On Thu, Feb 17, 2011 at 4:45 AM, Donny Brooks<dbrooks@xxxxxxxxxxxxxxxx> wrote:
On 2/16/2011 3:41 PM, Fajar A. Nugraha wrote:
On Thu, Feb 17, 2011 at 4:35 AM, Donny Brooks<dbrooks@xxxxxxxxxxxxxxxx>
Ok, I added the IP information to the ifcfg-br20 file and ifdown/ifup
that
interface. I am able to ping the 192.168.130.X range but nothing in the
192.168.131.X, 192.168.132.X, or 192.168.133.X ranges. Here is the
contents
of that file:
DEVICE=br20
TYPE=Bridge
BOOTPROTO=static
IPADDR=192.168.130.51
NETMASK=255.255.0.0
NETWORK=192.168.0.0
ONBOOT=yes
Does all host in 192.168.X.X use the same /16 (255.255.0.0) netmask?
A common error is when some hosts use /16, while others use /24.
The only thing on that vlan is the SAN. Now that I think about it the
windows machine is set to a /24 on each interface. So it may be that the SAN
is set for /24 instead of /16. Now just to figure out how to have 4
"interfaces" each with a /24 subnet...... hmmmm. :)
That's easy. ifcfg-br20:1, ifcfg-br20:2, etc. :D
D'OH!!! And I had just mentioned that earlier! Thanks for stating the
obvious for those oblivious to it. :)
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
| |
|
Home