WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

RE: [Xen-users] Xen Security

 

On Fri, Jul 16, 2010 at 3:32 PM, Jonathan Tripathy <jonnyt@xxxxxxxxxxx> wrote:
> I'm guessing the same risks apply to Xen as they do
> VMWare?

in general, yes. As for vendor support, Redhat has been very
responsive in fixing whatever security bug that comes up (like
http://www.securitytracker.com/alerts/2009/Oct/1022977.html), so if
you're concerned about that, I suggest using RHEL/Centos and their
bundled Xen/kernel-xen version (which might be somewhat old, but
should be sufficient for most uses).

I also suggest you do whatever security measures you normally do in
your normal, non-virtual environment. Think of domU as just another
server, and dom0 as SAN/switch/router/firewall.

For example, if you never bother to rewrite a SAN's LUN with 0s before
reusing it on another host, then I don't see why you should bother
writing 0s to an LV that will be used by Xen. Another example, if
you're comfortable having a single firewall box and switch used by all
traffic on your network (using vlans), then I don't see why you should
treat Xen networking differently.

--
Fajar

-----------------------------------------------------------------------------------------------------------------------------------------------------------

Hi Fajar,

I am using CentOS 5.5 with the stock Xen kernel that came with it, however I'm using Xen 3.4.2 from gitco.de - think this is safe enough?

I'm fairly sure that my network setup is secure. I'm using iptables to prevent IP spoofing, and using ebtables to prevent MAC spoofing. A firewall DomU (pfsense) has WAN, LAN, DMZ and PUBLIC interfaces. WAN and PUBLIC are bridged (For the customers' public VMs). The DMZ subnet only allows certain needed incoming ports from the internet (via NAT port forwarding), and outbound is also restricted to what's only needed. The LAN subnet doesn't allow any incoming ports from the internet. Ports between DMZ and LAN are also only open on a "need to" basis. I've been told that since my Public and DMZ bridges in the Dom0 have no IP addresses, it is impossible for the Dom0 to route traffic between them without going through the firewall DomU.

What you think?

Thanks

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
<Prev in Thread] Current Thread [Next in Thread>