|
|
|
|
|
|
|
|
|
|
xen-users
[Xen-users] no bridge is shown by ifconfig on Xen Debian
I do an ifconfig but at the last of it there is no bridge name
have a look at it I have installed all the things myself.
As Xen wiki page says the default bridge should be xen-br0 in the last
output of ifconfig it is not there
it is Xen-3.2.1 default name of bridge as they are saying should be
the same as default ethernet interface but that is xen-3.3 read point
number 6.So this is not the exact case with me.Where is the difference
occuring.
Here is
http://wiki.xensource.com/xenwiki/XenNetworking
DDDE:~# ifconfig
eth2 Link encap:Ethernet HWaddr 00:26:b9:82:42:38
inet addr:192.1.100.12 Bcast:192.1..255 Mask:255.255.0.0
inet6 addr: fe80::226:b9ff:fe82:4238/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:573 errors:0 dropped:0 overruns:0 frame:0
TX packets:172 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:215986 (210.9 KiB) TX bytes:20257 (19.7 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:14 errors:0 dropped:0 overruns:0 frame:0
TX packets:14 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1058 (1.0 KiB) TX bytes:1058 (1.0 KiB)
peth2 Link encap:Ethernet HWaddr 00:26:b9:82:42:38
inet6 addr: fe80::226:b9ff:fe82:4238/64 Scope:Link
UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
RX packets:579 errors:0 dropped:0 overruns:0 frame:0
TX packets:202 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:224616 (219.3 KiB) TX bytes:23341 (22.7 KiB)
Interrupt:32 Memory:da000000-da012100
vif1.0 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
RX packets:7 errors:0 dropped:0 overruns:0 frame:0
TX packets:290 errors:0 dropped:7 overruns:0 carrier:0
collisions:0 txqueuelen:32
RX bytes:412 (412.0 B) TX bytes:127454 (124.4 KiB)
vif2.0 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
RX packets:7 errors:0 dropped:0 overruns:0 frame:0
TX packets:206 errors:0 dropped:5 overruns:0 carrier:0
collisions:0 txqueuelen:32
RX bytes:412 (412.0 B) TX bytes:90609 (88.4 KiB)
vif3.0 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
RX packets:7 errors:0 dropped:0 overruns:0 frame:0
TX packets:159 errors:0 dropped:5 overruns:0 carrier:0
collisions:0 txqueuelen:32
RX bytes:412 (412.0 B) TX bytes:72211 (70.5 KiB)
vif4.0 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
RX packets:6 errors:0 dropped:0 overruns:0 frame:0
TX packets:86 errors:0 dropped:29 overruns:0 carrier:0
collisions:0 txqueuelen:32
RX bytes:356 (356.0 B) TX bytes:44722 (43.6 KiB)
--
Tapas
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Xen-users] no bridge is shown by ifconfig on Xen Debian,
Tapas Mishra <=
|
|
|
|
|