On Wed, Mar 03, 2010 at 02:50:42PM -0800, kishore kumar wrote:
> Attached is the file which gives my Hardware configuration details.
>
> I did cat /proc/cpuinfo command to get this.
>
> Let me know if you need any other info.
>
> Hi Pasi
>
> The Xen boot messages I am getting is on the vga, not on the serial port.
> I get other BIOS information on the serial port and then transfer the Xen
> boot messages to vga.
>
> Let me know how to capture the boot messages from vga.
>
You should configure Xen to log to the serial console, and then capture from
serial,
see:
http://wiki.xensource.com/xenwiki/XenSerialConsole
There's an example for Xen + pvops dom0 kernel.
-- Pasi
> Thanks
> BK.
>
> On Wed, Mar 3, 2010 at 2:30 AM, Boris Derzhavets
> <[1]bderzhavets@xxxxxxxxx> wrote:
>
> Could you share your hardware configuration ?
>
> Boris.
>
> --- On Tue, 3/2/10, kishore kumar <[2]bodkekumar@xxxxxxxxx> wrote:
>
> From: kishore kumar <[3]bodkekumar@xxxxxxxxx>
> Subject: Re: [Xen-users] xen Installation through YUM
> To: "Boris Derzhavets" <[4]bderzhavets@xxxxxxxxx>
> Cc: [5]xen-users@xxxxxxxxxxxxxxxxxxx
> Date: Tuesday, March 2, 2010, 8:02 PM
>
> I disabled DRM and rebuilt the kernel. Still the same black screen. :(
>
> I did connect the serial port as well.
>
>
>
> On Tue, Mar 2, 2010 at 2:04 PM, Boris Derzhavets <[6]bderzhavets@xxxxxxxxx>
> wrote:
>
> Might be DRM issue as i wrote . Try disable DRM first.
> But i suspect , serial console would be required.
>
> Boris.
>
> --- On Tue, 3/2/10, kishore kumar <[7]bodkekumar@xxxxxxxxx> wrote:
>
> From: kishore kumar <[8]bodkekumar@xxxxxxxxx>
> Subject: Re: [Xen-users] xen Installation through YUM
> To: "Boris Derzhavets" <[9]bderzhavets@xxxxxxxxx>
> Cc: [10]xen-users@xxxxxxxxxxxxxxxxxxx
> Date: Tuesday, March 2, 2010, 2:56 PM
>
> Hi Boris,
>
> I successfully compiled and installed linux 2.6.32.9.
>
> I modified the grub.conf to boot with xen.
>
> After reboot, the system shows some xen boot messages and goes to black
> screen. Nothing
> comes on the screen.
>
> What could be wrong here?
>
> Thanks
> BK
>
>
> On Mon, Mar 1, 2010 at 5:12 PM, Boris Derzhavets
> <[11]bderzhavets@xxxxxxxxx> wrote:
>
> Quote:-
>
> PVOPS kernel 2.6.31.6 may be installed via Jeremy Fitzhardinge
> Git Repository to support Xen 3.4.2 Dom0.
> # git clone
> git://[12]git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> linux-2.6-xen (THIS WENT THROUGH SUCCESSFULLY)
> # cd linux-2.6-xen
>
> end Quote.
>
> Add commands:-
>
> # git checkout origigin/xen/stable -b xen/stable
> # git pull
>
> Build with attached config :-
>
> # make -j2 (or 4 -number of cores your CPU)
> # make modules_install install
>
> Create initrd-2.6.32.9.img for your OS.
>
> Boris.
>
> --- On Mon, 3/1/10, kishore kumar <[13]bodkekumar@xxxxxxxxx> wrote:
>
> From: kishore kumar <[14]bodkekumar@xxxxxxxxx>
> Subject: Re: [Xen-users] xen Installation through YUM
> To: "Boris Derzhavets" <[15]bderzhavets@xxxxxxxxx>
> Cc: "Pasi Kärkkäinen" <[16]pasik@xxxxxx>,
> [17]xen-users@xxxxxxxxxxxxxxxxxxx
> Date: Monday, March 1, 2010, 7:52 PM
>
> Hi All,
>
> To follow up this, after Installing Xen Hypervisor 3.4.2
> successfully, I downloaded
> Linux 2.6.18 with Xen 3.4.x support source tarball, updated for Xen
> 3.4.2 from
> [18]xen.org website and compiled and installed.
>
> Later I changed my grub.conf file to boot from Xen.
>
> #######################
> root (hd0,0)
> kernel /xen-3.4.2.gz
> module /vmlinuz-2.6.18 ro root=dev/mapper/VolGroup-lv_root
> LANG=en_US.UTF-8
> SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet
> module /initrd-2.6.18.8.img
> #######################
>
> After I reboot, I get the following messages.
>
> ################
>
> Xenopf Intel processor model 44 or P6 family is not supported.
> Initialization failed.
>
> LOADING DOMAIN 0
> Cannot load bzImage v2.04. v2.08 is required.
>
> Panic on CPU 0
> Could not set up DOM 0 Guest OS
> Reboot in 5 sec
>
> ###############
> What is wrong happening here?
>
> THanks
> BK
> On Mon, Mar 1, 2010 at 12:14 PM, kishore kumar
> <[19]bodkekumar@xxxxxxxxx> wrote:
>
> Hi Boris,
>
> I was following your steps and got stuck in the middle. Here is
> what I did...
>
> Step 1 was sucessfull and Xen Hypervisor 3.4.2 is installed
> successfully.
>
> Now while doing the step 2
>
> STEP 2:
>
> Install Libvirt
> # yum install libvirt libvirt-python python-virtinst \
> virt-manager virt-viewer (THIS WENT THROUGH SUCCESSFULLY)
>
> PVOPS kernel 2.6.31.6 may be installed via Jeremy Fitzhardinge
> Git Repository to support Xen 3.4.2 Dom0.
> # git clone
> git://[20]git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> linux-2.6-xen (THIS WENT THROUGH SUCCESSFULLY)
> # cd linux-2.6-xen
> # make menuconfig ( setup Xen Dom0 support) (HOW TO SET UP THIS
> ?)
> # make -j(x)(number_of_kernels) (I DID MAKE -J, WHAT SHOULD I
> GIVE HERE IN PLACE OF
> x. ??
>
> BUT GAVE ME ERRORS. I DONT KNOW WHAT WRONG I AM DOING HERE.
> CAN YOU PLEASE HELP ME
> OUT IN THIS?)
>
> I HAVE ATTACHED THE LOG FILE FOR YOUR REFERENCE. I AM USING
> FEDORA 12 MACHINE.
>
> Thanks
> BK
>
> On Sat, Feb 27, 2010 at 4:27 AM, Boris Derzhavets
> <[21]bderzhavets@xxxxxxxxx> wrote:
>
> Nothing went wrong.
> Now build pvops kernel.
> Instructions bellow.
> Reading PVOPS WIKI would help as well
>
> Boris.
>
> --- On Fri, 2/26/10, kishore kumar <[22]bodkekumar@xxxxxxxxx>
> wrote:
>
> From: kishore kumar <[23]bodkekumar@xxxxxxxxx>
> Subject: Re: [Xen-users] xen Installation through YUM
> To: "Pasi Kärkkäinen" <[24]pasik@xxxxxx>
> Cc: "Boris Derzhavets" <[25]bderzhavets@xxxxxxxxx>,
> [26]xen-users@xxxxxxxxxxxxxxxxxxx
> Date: Friday, February 26, 2010, 9:41 PM
>
> Now I am able to do yum install kernel-xen xen.
>
> I can see the xen Images sitting in /boot directory. Its
> xen-3.4.2.gz and xen.gz.
>
> Is this what to be expected ?
>
> I changed the grub.conf file to boot with Xen as below
>
> title Fedora (2.6.31.9-174.fc12.x86_64)
> root(hd0,0)
> kernel /xen-3.4.2.gz
>
> My question is I dont see vmlinuz-2.6-xen0 in /boot directory.
>
> Do I need to add this line module /boot/vmlinuz-2.6-xen0 ???
> But I dont see this
> file .When we do yum to insall xen, will it also install
> vmlinuz-2.6-xen0 also ??
>
> Any idea what went wrong here??
>
> thanks
> BK
>
>
> On Fri, Feb 26, 2010 at 2:28 PM, Pasi Kärkkäinen
> <[27]pasik@xxxxxx> wrote:
>
> On Fri, Feb 26, 2010 at 02:23:37PM -0800, kishore kumar
> wrote:
> > I have already set gpgcheck=0 in /etc/yum.conf file.
> >
> > I did not clearly understood on what you said in the
> next line.........
> >
> > to install unsigned rpms supposed to be built latter.
> > Activate rpmbuild on F12:-
> >
> > # yum install transfig texi2html libaio-devel dev86 \
> > glibc-devel.i686 e2fsprogs-devel gitk mkinitrd
> > what should I do can you please clarify me on the
> above statements you
> > said???
> >
> > I followed your next step and downloaded
> xen-3.4.2-2.fc13.src.rpm from
> > internet and started doing the steps mentioned by you.
> but at the very
> > step I get the messages saying
> >
> > After I ran the rpm -iv xen-3.4.2-2.fc13.src.rpm
> > warning: group mockbuild does not exist - using root
> > warning: user mockbuild does not exist - using root
> > warning: group mockbuild does not exist - using root
> > warning: user mockbuild does not exist - using root
> > warning: group mockbuild does not exist - using root
> > warning: user mockbuild does not exist - using root
> > warning: group mockbuild does not exist - using root
> > warning: user mockbuild does not exist - using root
> > warning: group mockbuild does not exist - using root
> > warning: user mockbuild does not exist - using root
> > warning: group mockbuild does not exist - using root
> > warning: user mockbuild does not exist - using root
> > warning: group mockbuild does not exist - using root
> > warning: user mockbuild does not exist - using root
> > warning: group mockbuild does not exist - using root
> > warning: user mockbuild does not exist - using root
> > warning: group mockbuild does not exist - using root
> > warning: user mockbuild does not exist - using root
> > warning: group mockbuild does not exist - using root
> > warning: user mockbuild does not exist - using root
> > warning: group mockbuild does not exist - using root
> >
> > Any idea what went wrong again??
> >
>
> Nothing went wrong, those are just warnings.
>
> -- Pasi
> > THanks
> > bk
> >
> > On Fri, Feb 26, 2010 at 5:39 AM, Boris Derzhavets
> > <[1][28]bderzhavets@xxxxxxxxx> wrote:
> >
> > Set in /etc/yum.conf set gpgcheck=0 ( temporarily )
> > to install unsigned rpms supposed to be built latter.
> > Activate rpmbuild on F12:-
> >
> > # yum install transfig texi2html libaio-devel dev86 \
> > glibc-devel.i686 e2fsprogs-devel gitk mkinitrd
> >
> > 1. Install Xen 3.4.2 via xen-3.4.2-2.fc13.src.rpm.
> Download from Net
> > xen-3.4.2-2.fc13.src.rpm. Now :-
> >
> > # rpm -iv xen-3.4.2-2.fc13.src.rpm
> > # cd
> > # cd rpmbuild/SPEC
> > # rpmbuild -bb ./xen.spec
> > # cd ../RPMS/x86_64
> > yum install xen-3.4.2-2.fc12.x86_64.rpm \
> > xen-debuginfo-3.4.2-2.fc12.x86_64.rpm \
> > xen-devel-3.4.2-2.fc12.x86_64.rpm \
> > xen-doc-3.4.2-2.fc12.x86_64.rpm \
> > xen-hypervisor-3.4.2-2.fc12.x86_64.rpm \
> > xen-libs-3.4.-2.fc12.x86_64.rpm \
> > xen-runtime-3.4.2-2.fc12.x86_64.rpm
> >
> > Xen Hypervisor 3.4.2 installed
> >
> > 2. Install Libvirt
> >
> > # yum install libvirt libvirt-python python-virtinst \
> > virt-manager virt-viewer
> >
> > PVOPS kernel 2.6.31.6 may be installed via Jeremy
> Fitzhardinge
> > Git Repository to support Xen 3.4.2 Dom0.
> >
> > # git clone
>
> git://[2][29]git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > linux-2.6-xen
> > # cd linux-2.6-xen
> > # make menuconfig ( setup Xen Dom0 support)
> > # make -j(x)(number_of_kernels)
> > # make modules_install install
> >
> > You may also want to build 2.6.32.9 pvops
> >
> > # git checkout origin/xen/stable -b xen/stable
> >
> > I just switched from xen/master ( default 2.6.31.6 ) to
> xen/stable (the most
> > recent supposed to become LTS - 2.6.32.9)
> >
> > Boris.
> >
> > --- On Fri, 2/26/10, Pasi Kärkkäinen
> <[3][30]pasik@xxxxxx> wrote:
> >
> > From: Pasi Kärkkäinen <[4][31]pasik@xxxxxx>
> > Subject: Re: [Xen-users] xen Installation through YUM
> > To: "kishore kumar" <[5][32]bodkekumar@xxxxxxxxx>
> > Cc: [6][33]xen-users@xxxxxxxxxxxxxxxxxxx
> > Date: Friday, February 26, 2010, 4:50 AM
> >
> > On Thu, Feb 25, 2010 at 06:04:26PM -0800, kishore kumar
> wrote:
> > > HI,
> > >
> > > I am trying to install xen through yum. Here is
> what I did.
> > >
> > >
> > > [root@localhost Kishore]# yum install kernel-xen
> xen
> > >
> > > Setting up Install Process
> > >
> > > Resolving Dependencies
> > >
> > > --> Running transaction check
> > >
> > > ---> Package kernel.x86_64 0:2.6.31.9-174.fc12 set
> to be installed
> > >
> > > --> Processing Dependency: kernel-firmware >=
> 2.6.31.9-174.fc12 for
> > > package: kernel-2.6.31.9-174.fc12.x86_64
> > >
> > > ---> Package xen.x86_64 0:3.4.2-1.fc12 set to be
> updated
> > >
> > > --> Processing Dependency: xen-runtime =
> 3.4.2-1.fc12 for package:
> > > xen-3.4.2-1.fc12.x86_64
> > >
> > > --> Processing Dependency: PyXML for package:
> xen-3.4.2-1.fc12.x86_64
> > >
> > > --> Running transaction check
> > >
> > > ---> Package PyXML.x86_64 0:0.8.4-17.fc12 set to
> be updated
> > >
> > > ---> Package kernel-firmware.noarch
> 0:2.6.31.9-174.fc12 set to be
> updated
> > >
> > > ---> Package xen-runtime.x86_64 0:3.4.2-1.fc12 set
> to be updated
> > >
> > > --> Processing Dependency: xen-libs = 3.4.2-1.fc12
> for package:
> > > xen-runtime-3.4.2-1.fc12.x86_64
> > >
> > > --> Processing Dependency: xen-hypervisor-abi =
> 3.4 for package:
> > > xen-runtime-3.4.2-1.fc12.x86_64
> > >
> > > --> Running transaction check
> > >
> > > ---> Package xen-hypervisor.x86_64 0:3.4.2-1.fc12
> set to be updated
> > >
> > > ---> Package xen-libs.x86_64 0:3.4.2-1.fc12 set to
> be updated
> > >
> > > --> Finished Dependency Resolution
> > >
> > > Dependencies Resolved
> > >
> > >
> >
>
> ================================================================================
> > >
> > > Package Arch Version Repository Size
> > >
> > >
> >
>
> ================================================================================
> > >
> > > Installing:
> > >
> > > kernel x86_64 2.6.31.9-174.fc12 updates-released
> 20 M
> > >
> > > xen x86_64 3.4.2-1.fc12 updates-released 898 k
> > >
> > > Installing for dependencies:
> > >
> > > PyXML x86_64 0.8.4-17.fc12 updates-released 906 k
> > >
> > > xen-hypervisor x86_64 3.4.2-1.fc12
> updates-released 2.9 M
> > >
> > > xen-runtime x86_64 3.4.2-1.fc12 updates-released
> 4.0 M
> > >
> > > Updating for dependencies:
> > >
> > > kernel-firmware noarch 2.6.31.9-174.fc12
> updates-released 906 k
> > >
> > > xen-libs x86_64 3.4.2-1.fc12 updates-released 165 k
> > >
> > > Transaction Summary
> > >
> > >
> >
>
> ================================================================================
> > >
> > > Install 5 Package(s)
> > >
> > > Upgrade 2 Package(s)
> > >
> > > Total download size: 29 M
> > >
> > > Is this ok [y/N]: y
> > >
> > > Downloading Packages:
> > >
> > > (1/7): PyXML-0.8.4-17.fc12.x86_64.rpm | 906 kB
> 00:00
> > >
> > > (2/7): kernel-2.6.31.9-174.fc12.x86_64.rpm | 20 MB
> 00:02
> > >
> > > (3/7):
> kernel-firmware-2.6.31.9-174.fc12.noarch.rpm | 906 kB 00:00
> > >
> > > (4/7): xen-3.4.2-1.fc12.x86_64.rpm | 898 kB 00:00
> > >
> > > (5/7): xen-hypervisor-3.4.2-1.fc12.x86_64.rpm |
> 2.9 MB 00:00
> > >
> > > (6/7): xen-libs-3.4.2-1.fc12.x86_64.rpm | 165 kB
> 00:00
> > >
> > > (7/7): xen-runtime-3.4.2-1.fc12.x86_64.rpm | 4.0
> MB 00:00
> > >
> > >
> >
>
> --------------------------------------------------------------------------------
> > >
> > > Total 6.7 MB/s | 29 MB 00:04
> > >
> > > warning: rpmts_HdrFromFdno: Header V3 RSA/SHA256
> signature: NOKEY, key
> ID
> > > 57bbccba
> > >
> > > Public key for xen-libs-3.4.2-1.fc12.x86_64.rpm
> is not installed
> > >
> > >
> > >
> > > Did Xen got installed with this?
> > >
> > > Will the grub.conf be automatically updtaed after
> I run this command.
> > > (But I dont see my grub.conf being updated)
> > >
> > > Any Idea what went wrong here.
> > >
> >
> > Fedora 12 doesn't include Xen dom0 capable kernel, see:
> >
> [7][34]http://fedoraproject.org/wiki/Features/XenPvopsDom0
> >
> > You need to get one of the 'testing' rpms, or compile
> it yourself.
> >
> > -- Pasi
> >
> > _______________________________________________
> > Xen-users mailing list
> > [8][35]Xen-users@xxxxxxxxxxxxxxxxxxx
> > [9][36]http://lists.xensource.com/xen-users
> >
> > References
> >
> > Visible links
> > 1. mailto:[37]bderzhavets@xxxxxxxxx
> > 2.
> [38]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > 3. mailto:[39]pasik@xxxxxx
> > 4. mailto:[40]pasik@xxxxxx
> > 5. mailto:[41]bodkekumar@xxxxxxxxx
> > 6. mailto:[42]xen-users@xxxxxxxxxxxxxxxxxxx
> > 7.
> [43]http://fedoraproject.org/wiki/Features/XenPvopsDom0
> > 8.
> [44]http://mc/compose?to=Xen-users@xxxxxxxxxxxxxxxxxxx
> > 9. [45]http://lists.xensource.com/xen-users
>
> -----Inline Attachment Follows-----
>
> _______________________________________________
> Xen-users mailing list
> [46]Xen-users@xxxxxxxxxxxxxxxxxxx
> [47]http://lists.xensource.com/xen-users
>
> -----Inline Attachment Follows-----
>
> _______________________________________________
> Xen-users mailing list
> [48]Xen-users@xxxxxxxxxxxxxxxxxxx
> [49]http://lists.xensource.com/xen-users
>
> -----Inline Attachment Follows-----
>
> _______________________________________________
> Xen-users mailing list
> [50]Xen-users@xxxxxxxxxxxxxxxxxxx
> [51]http://lists.xensource.com/xen-users
>
> References
>
> Visible links
> 1. mailto:bderzhavets@xxxxxxxxx
> 2. mailto:bodkekumar@xxxxxxxxx
> 3. mailto:bodkekumar@xxxxxxxxx
> 4. mailto:bderzhavets@xxxxxxxxx
> 5. mailto:xen-users@xxxxxxxxxxxxxxxxxxx
> 6. http://mc/compose?to=bderzhavets@xxxxxxxxx
> 7. http://mc/compose?to=bodkekumar@xxxxxxxxx
> 8. http://mc/compose?to=bodkekumar@xxxxxxxxx
> 9. http://mc/compose?to=bderzhavets@xxxxxxxxx
> 10. http://mc/compose?to=xen-users@xxxxxxxxxxxxxxxxxxx
> 11. http://mc/compose?to=bderzhavets@xxxxxxxxx
> 12. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 13. http://mc/compose?to=bodkekumar@xxxxxxxxx
> 14. http://mc/compose?to=bodkekumar@xxxxxxxxx
> 15. http://mc/compose?to=bderzhavets@xxxxxxxxx
> 16. http://mc/compose?to=pasik@xxxxxx
> 17. http://mc/compose?to=xen-users@xxxxxxxxxxxxxxxxxxx
> 18. http://xen.org/
> 19. http://mc/compose?to=bodkekumar@xxxxxxxxx
> 20. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 21. http://mc/compose?to=bderzhavets@xxxxxxxxx
> 22. http://mc/compose?to=bodkekumar@xxxxxxxxx
> 23. http://mc/compose?to=bodkekumar@xxxxxxxxx
> 24. http://mc/compose?to=pasik@xxxxxx
> 25. http://mc/compose?to=bderzhavets@xxxxxxxxx
> 26. http://mc/compose?to=xen-users@xxxxxxxxxxxxxxxxxxx
> 27. http://mc/compose?to=pasik@xxxxxx
> 28. http://mc/compose?to=bderzhavets@xxxxxxxxx
> 29. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 30. http://mc/compose?to=pasik@xxxxxx
> 31. http://mc/compose?to=pasik@xxxxxx
> 32. http://mc/compose?to=bodkekumar@xxxxxxxxx
> 33. http://mc/compose?to=xen-users@xxxxxxxxxxxxxxxxxxx
> 34. http://fedoraproject.org/wiki/Features/XenPvopsDom0
> 35. http://mc/compose?to=Xen-users@xxxxxxxxxxxxxxxxxxx
> 36. http://lists.xensource.com/xen-users
> 37. http://mc/compose?to=bderzhavets@xxxxxxxxx
> 38. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 39. http://mc/compose?to=pasik@xxxxxx
> 40. http://mc/compose?to=pasik@xxxxxx
> 41. http://mc/compose?to=bodkekumar@xxxxxxxxx
> 42. http://mc/compose?to=xen-users@xxxxxxxxxxxxxxxxxxx
> 43. http://fedoraproject.org/wiki/Features/XenPvopsDom0
> 44. http://mc/compose?to=Xen-users@xxxxxxxxxxxxxxxxxxx
> 45. http://lists.xensource.com/xen-users
> 46. http://mc/compose?to=Xen-users@xxxxxxxxxxxxxxxxxxx
> 47. http://lists.xensource.com/xen-users
> 48. http://mc/compose?to=Xen-users@xxxxxxxxxxxxxxxxxxx
> 49. http://lists.xensource.com/xen-users
> 50. http://mc/compose?to=Xen-users@xxxxxxxxxxxxxxxxxxx
> 51. http://lists.xensource.com/xen-users
> [root@localhost default]# cat /proc/cpuinfo
> processor : 0
> vendor_id : GenuineIntel
> cpu family : 6
> model : 44
> model name : Genuine Intel(R) CPU 000 @ 3.20GHz
> stepping : 0
> cpu MHz : 1596.000
> cache size : 12288 KB
> physical id : 0
> siblings : 12
> core id : 0
> cpu cores : 6
> apicid : 0
> initial apicid : 0
> fpu : yes
> fpu_exception : yes
> cpuid level : 11
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat
> pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb
> rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology tsc_reliable
> nonstop_tsc pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16
> xtpr pdcm dca sse4_1 sse4_2 popcnt aes lahf_lm ida arat tpr_shadow vnmi
> flexpriority ept vpid
> bogomips : 6400.22
> clflush size : 64
> cache_alignment : 64
> address sizes : 40 bits physical, 48 bits virtual
> power management:
>
> processor : 1
> vendor_id : GenuineIntel
> cpu family : 6
> model : 44
> model name : Genuine Intel(R) CPU 000 @ 3.20GHz
> stepping : 0
> cpu MHz : 1596.000
> cache size : 12288 KB
> physical id : 0
> siblings : 12
> core id : 1
> cpu cores : 6
> apicid : 2
> initial apicid : 2
> fpu : yes
> fpu_exception : yes
> cpuid level : 11
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat
> pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb
> rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology tsc_reliable
> nonstop_tsc pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16
> xtpr pdcm dca sse4_1 sse4_2 popcnt aes lahf_lm ida arat tpr_shadow vnmi
> flexpriority ept vpid
> bogomips : 6399.78
> clflush size : 64
> cache_alignment : 64
> address sizes : 40 bits physical, 48 bits virtual
> power management:
>
> processor : 2
> vendor_id : GenuineIntel
> cpu family : 6
> model : 44
> model name : Genuine Intel(R) CPU 000 @ 3.20GHz
> stepping : 0
> cpu MHz : 1596.000
> cache size : 12288 KB
> physical id : 0
> siblings : 12
> core id : 2
> cpu cores : 6
> apicid : 4
> initial apicid : 4
> fpu : yes
> fpu_exception : yes
> cpuid level : 11
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat
> pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb
> rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology tsc_reliable
> nonstop_tsc pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16
> xtpr pdcm dca sse4_1 sse4_2 popcnt aes lahf_lm ida arat tpr_shadow vnmi
> flexpriority ept vpid
> bogomips : 6399.78
> clflush size : 64
> cache_alignment : 64
> address sizes : 40 bits physical, 48 bits virtual
> power management:
>
> processor : 3
> vendor_id : GenuineIntel
> cpu family : 6
> model : 44
> model name : Genuine Intel(R) CPU 000 @ 3.20GHz
> stepping : 0
> cpu MHz : 1596.000
> cache size : 12288 KB
> physical id : 0
> siblings : 12
> core id : 8
> cpu cores : 6
> apicid : 16
> initial apicid : 16
> fpu : yes
> fpu_exception : yes
> cpuid level : 11
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat
> pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb
> rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology tsc_reliable
> nonstop_tsc pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16
> xtpr pdcm dca sse4_1 sse4_2 popcnt aes lahf_lm ida arat tpr_shadow vnmi
> flexpriority ept vpid
> bogomips : 6399.78
> clflush size : 64
> cache_alignment : 64
> address sizes : 40 bits physical, 48 bits virtual
> power management:
>
> processor : 4
> vendor_id : GenuineIntel
> cpu family : 6
> model : 44
> model name : Genuine Intel(R) CPU 000 @ 3.20GHz
> stepping : 0
> cpu MHz : 1596.000
> cache size : 12288 KB
> physical id : 0
> siblings : 12
> core id : 9
> cpu cores : 6
> apicid : 18
> initial apicid : 18
> fpu : yes
> fpu_exception : yes
> cpuid level : 11
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat
> pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb
> rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology tsc_reliable
> nonstop_tsc pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16
> xtpr pdcm dca sse4_1 sse4_2 popcnt aes lahf_lm ida arat tpr_shadow vnmi
> flexpriority ept vpid
> bogomips : 6399.78
> clflush size : 64
> cache_alignment : 64
> address sizes : 40 bits physical, 48 bits virtual
> power management:
>
> processor : 5
> vendor_id : GenuineIntel
> cpu family : 6
> model : 44
> model name : Genuine Intel(R) CPU 000 @ 3.20GHz
> stepping : 0
> cpu MHz : 1596.000
> cache size : 12288 KB
> physical id : 0
> siblings : 12
> core id : 10
> cpu cores : 6
> apicid : 20
> initial apicid : 20
> fpu : yes
> fpu_exception : yes
> cpuid level : 11
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat
> pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb
> rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology tsc_reliable
> nonstop_tsc pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16
> xtpr pdcm dca sse4_1 sse4_2 popcnt aes lahf_lm ida arat tpr_shadow vnmi
> flexpriority ept vpid
> bogomips : 6399.78
> clflush size : 64
> cache_alignment : 64
> address sizes : 40 bits physical, 48 bits virtual
> power management:
>
> processor : 6
> vendor_id : GenuineIntel
> cpu family : 6
> model : 44
> model name : Genuine Intel(R) CPU 000 @ 3.20GHz
> stepping : 0
> cpu MHz : 1596.000
> cache size : 12288 KB
> physical id : 0
> siblings : 12
> core id : 0
> cpu cores : 6
> apicid : 1
> initial apicid : 1
> fpu : yes
> fpu_exception : yes
> cpuid level : 11
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat
> pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb
> rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology tsc_reliable
> nonstop_tsc pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16
> xtpr pdcm dca sse4_1 sse4_2 popcnt aes lahf_lm ida arat tpr_shadow vnmi
> flexpriority ept vpid
> bogomips : 6399.78
> clflush size : 64
> cache_alignment : 64
> address sizes : 40 bits physical, 48 bits virtual
> power management:
>
> processor : 7
> vendor_id : GenuineIntel
> cpu family : 6
> model : 44
> model name : Genuine Intel(R) CPU 000 @ 3.20GHz
> stepping : 0
> cpu MHz : 1596.000
> cache size : 12288 KB
> physical id : 0
> siblings : 12
> core id : 1
> cpu cores : 6
> apicid : 3
> initial apicid : 3
> fpu : yes
> fpu_exception : yes
> cpuid level : 11
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat
> pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb
> rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology tsc_reliable
> nonstop_tsc pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16
> xtpr pdcm dca sse4_1 sse4_2 popcnt aes lahf_lm ida arat tpr_shadow vnmi
> flexpriority ept vpid
> bogomips : 6399.78
> clflush size : 64
> cache_alignment : 64
> address sizes : 40 bits physical, 48 bits virtual
> power management:
>
> processor : 8
> vendor_id : GenuineIntel
> cpu family : 6
> model : 44
> model name : Genuine Intel(R) CPU 000 @ 3.20GHz
> stepping : 0
> cpu MHz : 1596.000
> cache size : 12288 KB
> physical id : 0
> siblings : 12
> core id : 2
> cpu cores : 6
> apicid : 5
> initial apicid : 5
> fpu : yes
> fpu_exception : yes
> cpuid level : 11
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat
> pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb
> rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology tsc_reliable
> nonstop_tsc pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16
> xtpr pdcm dca sse4_1 sse4_2 popcnt aes lahf_lm ida arat tpr_shadow vnmi
> flexpriority ept vpid
> bogomips : 6399.78
> clflush size : 64
> cache_alignment : 64
> address sizes : 40 bits physical, 48 bits virtual
> power management:
>
> processor : 9
> vendor_id : GenuineIntel
> cpu family : 6
> model : 44
> model name : Genuine Intel(R) CPU 000 @ 3.20GHz
> stepping : 0
> cpu MHz : 1596.000
> cache size : 12288 KB
> physical id : 0
> siblings : 12
> core id : 8
> cpu cores : 6
> apicid : 17
> initial apicid : 17
> fpu : yes
> fpu_exception : yes
> cpuid level : 11
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat
> pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb
> rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology tsc_reliable
> nonstop_tsc pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16
> xtpr pdcm dca sse4_1 sse4_2 popcnt aes lahf_lm ida arat tpr_shadow vnmi
> flexpriority ept vpid
> bogomips : 6399.78
> clflush size : 64
> cache_alignment : 64
> address sizes : 40 bits physical, 48 bits virtual
> power management:
>
> processor : 10
> vendor_id : GenuineIntel
> cpu family : 6
> model : 44
> model name : Genuine Intel(R) CPU 000 @ 3.20GHz
> stepping : 0
> cpu MHz : 1596.000
> cache size : 12288 KB
> physical id : 0
> siblings : 12
> core id : 9
> cpu cores : 6
> apicid : 19
> initial apicid : 19
> fpu : yes
> fpu_exception : yes
> cpuid level : 11
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat
> pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb
> rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology tsc_reliable
> nonstop_tsc pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16
> xtpr pdcm dca sse4_1 sse4_2 popcnt aes lahf_lm ida arat tpr_shadow vnmi
> flexpriority ept vpid
> bogomips : 6399.78
> clflush size : 64
> cache_alignment : 64
> address sizes : 40 bits physical, 48 bits virtual
> power management:
>
> processor : 11
> vendor_id : GenuineIntel
> cpu family : 6
> model : 44
> model name : Genuine Intel(R) CPU 000 @ 3.20GHz
> stepping : 0
> cpu MHz : 1596.000
> cache size : 12288 KB
> physical id : 0
> siblings : 12
> core id : 10
> cpu cores : 6
> apicid : 21
> initial apicid : 21
> fpu : yes
> fpu_exception : yes
> cpuid level : 11
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat
> pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb
> rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology tsc_reliable
> nonstop_tsc pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16
> xtpr pdcm dca sse4_1 sse4_2 popcnt aes lahf_lm ida arat tpr_shadow vnmi
> flexpriority ept vpid
> bogomips : 6399.78
> clflush size : 64
> cache_alignment : 64
> address sizes : 40 bits physical, 48 bits virtual
> power management:
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home