|
|
|
|
|
|
|
|
|
|
xen-users
Re: [Xen-users] Network Stops when network-bridge starts
On Wed, Sep 2, 2009 at 4:37 PM, James
Hankins<jim@xxxxxxxxxxxxxxxxxxxxxxx> wrote:
> My local Dom(0) network stops working as soon as network-bridge is started.
> I'm running centos 5.3 and installed xen from repository via yum. I have a
> LinkSys 10/100/1000 PCI card in my machine.
Default network-bridge should work on RHEL/Centos.
On some cases (like a Broadcom tg3 that I have) the problem is that
the NIC hardware or firmware doesn't support bridging properly. I had
to upgrade its firmware to get it working correctly.
I suggest you check for NIC firmware upgrade, or try another NIC. Even
onboard NIC usually works well.
--
Fajar
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
|
|