xen-users
RE: [Xen-users] Hotplugging SCSI device to Windows 2k3 GOS
James,
Thanks for the feedback. I have able to load the
gplpv_chk_wnet_x86_0.10.0.86.msi on a freshly installed windows 2003 image. But
hot plugging is still not working for me.
I have an extra scsi device sdb [0:0:1:0] to test scsi hot plug. I have tried
following steps.
1. Started windows 2003 GOS with /gplpv boot option
2. Attached scsi device with following command
#xm scsi-attach Windows2003 0:0:1:0 0:0:1:0
I have seen a Xen SCSI Driver under SCSI and RAID Controllers with a Yellow
bang. Newly hot plugged device is not seen in Windows 2003 guest OS. My system
is in this state right now and I have made the system available in RDP. IP
address is 192.19.221.180 and root password is redhat.
You can find windows GOS image at /usr directory and Xen config file at
/usr/xen-config-file/ directory.
Your feed back is very much appreciated.
Thanks
Manoj
-----Original Message-----
From: James Harper [mailto:james.harper@xxxxxxxxxxxxxxxx]
Sent: Friday, July 17, 2009 6:54 PM
To: Jose, Manoj; Velayudhan, Vinu; Xen-users@xxxxxxxxxxxxxxxxxxx
Subject: RE: [Xen-users] Hotplugging SCSI device to Windows 2k3 GOS
>
> James,
>
> >I'm just uploading a 0.10.0.86 which may or may not fix the problem.
>
> >If you still get the yellow bang, can you tell me what the failure
code
> >is when you look at the properties?
>
> I have tried 0.10.0.86 and that also resulted in the same error.
Properties of
> 'Xen vif device #0' and 'Xen vbd Device #768' says "This device is not
> configured correctly (Code 1).
>
> >Also, if you are running 3.4.x you should get some debug output in
> >/var/log/xen/qemu-dm-<domu name>.log, please send that to me too.
>
> I am using xen 3.4.0 and I am attaching the log.
>
Definitely xenvbd and xennet are not loading correctly or at all.
Are you able to give me rdp access to the domU that the drivers are
installed on?
James
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- RE: [Xen-users] Hotplugging SCSI device to Windows 2k3 GOS, James Harper
- RE: [Xen-users] Hotplugging SCSI device to Windows 2k3 GOS, Velayudhan, Vinu
- RE: [Xen-users] Hotplugging SCSI device to Windows 2k3 GOS, James Harper
- RE: [Xen-users] Hotplugging SCSI device to Windows 2k3 GOS, Jose, Manoj
- RE: [Xen-users] Hotplugging SCSI device to Windows 2k3 GOS, James Harper
- RE: [Xen-users] Hotplugging SCSI device to Windows 2k3 GOS, Jose, Manoj
- RE: [Xen-users] Hotplugging SCSI device to Windows 2k3 GOS, Jose, Manoj
- RE: [Xen-users] Hotplugging SCSI device to Windows 2k3 GOS, James Harper
- RE: [Xen-users] Hotplugging SCSI device to Windows 2k3 GOS, Jose, Manoj
- RE: [Xen-users] Hotplugging SCSI device to Windows 2k3 GOS, James Harper
- RE: [Xen-users] Hotplugging SCSI device to Windows 2k3 GOS,
Jose, Manoj <=
- RE: [Xen-users] Hotplugging SCSI device to Windows 2k3 GOS, James Harper
- RE: [Xen-users] Hotplugging SCSI device to Windows 2k3 GOS, Jose, Manoj
- RE: [Xen-users] Hotplugging SCSI device to Windows 2k3 GOS, James Harper
- RE: [Xen-users] Hotplugging SCSI device to Windows 2k3 GOS, Jose, Manoj
- RE: [Xen-users] Hotplugging SCSI device to Windows 2k3 GOS, James Harper
- Re: [Xen-users] Hotplugging SCSI device to Windows 2k3 GOS, Jose, Manoj
- RE: [Xen-users] Hotplugging SCSI device to Windows 2k3 GOS, James Harper
- Re: [Xen-users] Hotplugging SCSI device to Windows 2k3 GOS, Jose, Manoj
|
|
|