| |
|
 |
|
 |
|
|
|
| |
|
|
xen-users
Re: [Xen-users] VM won't boot depending on processor
On 5/15/09 6:33 PM, Fajar A. Nugraha wrote:
On Sat, May 16, 2009 at 7:53 AM, Robert Bays<robert@xxxxxxxxxx> wrote:
domU: linux-2.6.29 with pv_ops enabled, compiled from kernel source
This setup works great on a number of different systems, but on one system
in particular the domU fails to boot.
This issue seems to have started somewhere with the linux 2.6.28-29 kernel.
Everything works fine if the domU kernel is 2.6.27.
Is the 2.6.27 -xen kernel or pv_ops kernel? I had problems starting
pv_ops kernel on some dom0s, and it turned out that particular server
has NX disabled by default on BIOS. Once enabled it worked correctly.
The 2.6.27 kernel was a pv_ops as well. I just checked the system and
there isn't an option in the BIOS to enable/disable no execute.
/proc/cpuinfo on the dom0 shows that it's supported a supported feature
of the CPU so I am assuming it's on by default in the BIOS. I should
have mentioned that dom0 is 64bit and that I have tried both a 32bit and
64bit domU, neither of which work.
Thanks for the suggestion.
Cheers,
Robert.
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
| |
|
Home