On Mon, Mar 9, 2009 at 7:56 PM, Longina Przybyszewska
<longina@xxxxxxxxxxxx> wrote:
> I have got 300gb iscsi target ( residence on SAN ) which should be directly
> bound to domU.
> (DomU: PV Ubuntu Hardy Linux 2.6.24-19-xen, Dom0: UbuntuHardy Linux
> 2.6-24-22-xen).
First of all, I believe you'd get better performance if the initiator
is on dom0 instead of domU.
>
> It comes up as 500gb block device!
> ========
> attempt to access beyond end of device
> sda: rw=0, want=976639545, limit=629147647
> ========
It means domU correctly recognize the block device as 629147647
sectors of 512-bytes long (300GB), but it was asked to get sector
number 976639545.
>
> cfdisk /dev/sda : "Fatal Error: Bad primary partition 0: Partition ends
> after end-of-disk"
>
> cfdisk /dev/sda1 : "Disk Driver /dev/sda1, size 500,0 Gb free space"
> Then I kan make primary paritions assigned name /dev/sda1p1, /dev/sda1p2.
>
Probably because there's already a partition table on that block
device, and it's messed up (maybe because the block the device was
used previously, and then shrinked).
What does "cat /proc/partitions" and "fdisk -l /dev/sda" shows?
If it is indeed messed up partition table, you can use fdisk's extra
functionality to change the number of heads, sectors/tracks, or
cylinders.
If it's a blank target with MBR partition, zeroing the first 512-byte
of the disk (with dd or whatever) should erase existing partition
table and let fdisk work out reasonable parameters. If it's GPT
parition though things can get a little more complicated :)
Regards,
Fajar
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home