|
|
|
|
|
|
|
|
|
|
xen-users
[Xen-users] domU vif networking problem or bug
Hi guys,
there must be something wrong, maybe with xen vif.
I have two test servers
1/ Supermicro 6015C-NT (this story isn't Supermicro problem!)
2/ HP ML 110 G5
System CentOS 5 (x86_64 for dom0, i86 for domU)
I can perform dom0 installation on both servers, without problem.
But I can't install domU at Supermicro (I can at HP).
Error:
Unable to retrieve http://192.168.6.100/centos/images/stage2.img
Using
virt-install -d --nographics -p -r 2048 --vcpus 1 -f /dev/lvg1/lv1 -l
http://192.168.6.100/centos/ -n test
Ok, I looking for other way. Migration domU from HP to Supermicro. Done
without problem.
But after domU boot up from Supermicro, I can ping domU, but I can't login via
ssh to domU.
Ok, I can login to domU at Supermicro from dom0 console. But there is still
problem with network. I can ping, dig elsewhere, but I can't do wget, elinks,
run network services ...
I can't see any errors log/message.
Supermicro have eth0 + eth1 module igb, Intel 82575EB.
[root@vali2 xen]# brctl show
bridge name bridge id STP enabled interfaces
virbr0 8000.000000000000 yes
xenbr0 8000.feffffffffff no vif1.0
peth0
vif0.0
Maybe, why two vif?
[root@vali2 xen]# xm li
Name ID Mem(MiB) VCPUs State Time(s)
Domain-0 0 1969 4 r----- 14.4
test 1 2047 1 -b---- 12.1
xm dmesg is here
http://fx2.unihost.cz/dom0.log
boot log for domU
http://fx2.unihost.cz/domU.log
other logs
http://fx2.unihost.cz/dmesg
http://fx2.unihost.cz/messages
http://fx2.unihost.cz/xend.log
http://fx2.unihost.cz/domain-builder-ng.log
Thanks in advance
Regards Martin
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Xen-users] domU vif networking problem or bug,
Martin Fuxa <=
|
|
|
|
|