[Xen-users] Install XP on sata XEN

[Mike Power <mpower@xxxxxxxxxxxxxxxxxx>]

Mike Power wrote:
> How are you guys going about installing XP on sata Xen?
>
> When ever I start up the domU using the XP cdrom as the boot device.  
> Then the XP installer bails out because it can not find a hard drive to 
> install on.  Is this because the hard drive I am pointing at is a sata 
> drive?
> Mike Power
That was my original email sent to the list it seems it never arrived. 
I shall try again.  But I have news.
A good way for me to trouble shoot this was to try and install windows 
natively.  This allowed me to determine that Windows (despite contrary 
advertisements) could not support installs on SATA.  Classic solution 
config BIOS and turn off AHCI.  Reboot into Linux-xen start the domU and 
it detects the harddrives.
Also it was mentioned on another post (that I replied to, also eaten) 
that someone was having trouble using an XP Pro upgrade disk.  I had the 
same problem.  I could not eject the XP Pro upgrade disk and insert the 
Windows 98 disk because windows would say it wasn't the correct disk or 
it could not read it.  Also I could not create an iso of the 98 disk as 
windows would say the same thing.  Some developer should investigate 
this, it sounds like a problem within Xen itself.  It is likely that 
windows is doing something funky, but it seems more likely that xen 
could be improved further in this area.
I solved the problem by plugging in another cdrom(ide) drive into the 
computer.  XP Pro upgrade was in one, Windows 98 was in the other. 
Lucky for me Microsoft did a good job in this area and checked the other 
cdrom.
Other notes, I told windows to do a full (not quick) format of my 80 gb 
drive and it failed...  Something for a developer to look at.
I passed this failure by doing a quick format of the drive.

However now I am stuck.

Some last thoughts before I break into the details of where I am 
currently at.
I think the idea of Xen and hardware virtualization is a euphoric idea. 
 The idea that I can relegate my windows to a domU that runs almost at 
100% instead of buying a whole seperate box is awesome.
Some tough love though, you have a slew of features but lack the quality 
it needs for consumption.  It is good to distribute to a testing 
community to find bugs, but not for production use.  I have twelve disk 
lines each of which represents a hurdle I needed to over come to proceed 
on the installation of windows.
Not to let the tone end on a negative note I have seen what xen is 
capable of, you have done some awesome work.  You have a wide array of 
features.  I would encourage you to take some time away from future 
feature development and spent some time boiling the quality down.  One 
last suggestion info info info.  Too often the difference between 
something like printf("Error") and printf("Error: %s") is hours of my 
time.  Your program has the information I need yet it doesn't volunteer 
it.
For example right now my domU won't boot off the hard disk.  I 
experimented by removing the hard drive from the disk line.  The result 
was the same.  So now I do not know if the bios can't see my hard drive 
or it just can't boot my hard drive.  A simple list of detected sata 
drives would save me loads of time.
Again I say info, info, info, quality, quality, quality, quality and 
pretty soon you'll see a random developer like me writing scripts to 
install domUs.  With the result that all a user will need to do is click 
on a check box or two and he'll have XP, Vista, MacOSX, Linux you name 
it all running within Xen.  You could be as common as gnome.
Mike Power
Awesome job, keep up the good work.  It would be nice if one of you 
could help me over my current hurdle.
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users