Re: [Xen-users] Debian domU interface naming strangeness

[Stephan Seitz <s.seitz@xxxxxxxxxxxx>]

Additionally, add a fixed mac adress to your vif line in your domU config, like

vif = [ 'mac=nn:nn:nn:nn:nn:nn,brigde=xxxxx' ]

otherwise domU's udev will start counting again on every boot (say, mac address 
change)



Alexander Hoßdorf schrieb:
> Hi,
>
> Have you got persistent mac adress configured for domU?
> You have a file called /etc/udev/rules.d/z25-persistent-net.rules in 
> debian DomU.
> empty it and reboot DomU.
>
> Hope this helps.
>
> Cheers,
> Alex
>
>
> Ray Barnes schrieb:
> > Hi all.  I've got a Debian domU I created from scratch a few weeks
> > ago.  Every time I rolled it out previously in testing, it worked
> > fine.  But now it seems to make the ethernet device eth1 rather than
> > eth0 in the domU:
> >
> > localhost:~# ifconfig -a
> > eth1      Link encap:Ethernet  HWaddr 00:16:3E:3D:A0:30
> >           BROADCAST MULTICAST  MTU:1500  Metric:1
> >           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> >           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> >           collisions:0 txqueuelen:1000
> >           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
> >
> > lo        Link encap:Local Loopback
> >           inet addr:127.0.0.1  Mask:255.0.0.0
> >           UP LOOPBACK RUNNING  MTU:16436  Metric:1
> >           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> >           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> >           collisions:0 txqueuelen:0
> >           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
> >
> > localhost:~# dmesg|grep -i eth
> > netfront: Initialising virtual ethernet driver.
> > netfront: device eth0 has flipping receive path.
> > localhost:~#
> >
> > Note that as eth1, it routes traffic just fine.  I can ifconfig it up
> > and set an IP address, then get good routed connectivity.  I'm seeing
> > this eth1 naming issue on dom0s running CentOS 5.0 with the stock Xen
> > 3.0.3 (yes that means literally 5.0, not a higher minor number), as
> > well as Cent 5.1 with Xen 3.2.0 compiled from source.  But obviously
> > it presents a problem since I can't count on consistent naming.
> >
> > Thoughts?
> >
> > -Ray
> >
> > _______________________________________________
> > Xen-users mailing list
> > Xen-users@xxxxxxxxxxxxxxxxxxx
> > http://lists.xensource.com/xen-users
> >
> > __________ Hinweis von ESET NOD32 Antivirus, Signaturdatenbank-Version 
> > 3316 (20080731) __________
> > E-Mail wurde geprüft mit ESET NOD32 Antivirus.
> >
> > http://www.eset.com
> >
> >
> >
> >   
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
--
Stephan Seitz
Senior System Administrator

*netz-haut* e.K.
multimediale kommunikation

zweierweg 22
97074 würzburg

fon: +49 931 2876247
fax: +49 931 2876248

web: www.netz-haut.de <http://www.netz-haut.de/>

registriergericht: amtsgericht würzburg, hra 5054

s_seitz.vcf
Description: Vcard

signature.asc
Description: OpenPGP digital signature

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users