|
|
|
|
|
|
|
|
|
|
xen-users
Re: [Xen-users] No network at all in Kubuntu 8.04
Doesn't work for me... :( It's really weird, cause when I run "sudo brctl
delif eth0 peth0" nothing in "ifconfig -a" changed, but the network is back.
What interfaces should be there normally? This is my "ifconfig -a" after the
delete of the peth0 interface (Which is not deleted):
irrlicht@home:~$ ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:00:00:00:00:00
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:49 errors:0 dropped:0 overruns:0 frame:0
TX packets:49 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:3958 (3.8 KB) TX bytes:3958 (3.8 KB)
peth0 Link encap:Ethernet HWaddr 00:1d:60:c3:81:60
inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::21d:60ff:fec3:8160/64 Scope:Link
UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
RX packets:1336 errors:0 dropped:0 overruns:0 frame:0
TX packets:100 errors:0 dropped:0 overruns:0 carrier:1
collisions:0 txqueuelen:1000
RX bytes:80681 (78.7 KB) TX bytes:8798 (8.5 KB)
veth0 Link encap:Ethernet HWaddr 00:00:00:00:00:00
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
veth1 Link encap:Ethernet HWaddr 00:00:00:00:00:00
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
veth2 Link encap:Ethernet HWaddr 00:00:00:00:00:00
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
veth3 Link encap:Ethernet HWaddr 00:00:00:00:00:00
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
vif0.0 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
vif0.1 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
vif0.2 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
vif0.3 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
On Sunday 11 May 2008 15:06:13 Steffen Heil wrote:
> Hi
>
> Ubuntu hardy has a fatal bug in it's networking kernel.
> https://bugs.launchpad.net/ubuntu/+source/xen-3.2/+bug/204010
>
> The kernel of "HIRANO Takahito" (comment 47) works for me.
>
> Regards,
> Steffen
>
> > -----Original Message-----
> > From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
> > [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of
> > Daniel Spies
> > Sent: Sunday, May 11, 2008 1:30 PM
> > To: xen-users@xxxxxxxxxxxxxxxxxxx
> > Subject: Re: [Xen-users] No network at all in Kubuntu 8.04
> >
> > On Saturday 10 May 2008 21:50:50 Todd Deshane wrote:
> > > > There was a post somewhere about deleting the xen state
> >
> > directory.
> >
> > > > This got rid of my tmpbridge .
> > > >
> > > > Which state directory? do you have a link to the post by chance?
> > >
> > > Cheers,
> > > Todd
> >
> > That didn't help for me... :( tmpbridge still there...
> > (I removed /var/lib/xend/state/ which was created again after
> > /etc/init.d/xend
> > restart)
> >
> > Cheers,
> > Daniel
> >
> > _______________________________________________
> > Xen-users mailing list
> > Xen-users@xxxxxxxxxxxxxxxxxxx
> > http://lists.xensource.com/xen-users
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
|
|