Re: [Xen-users] Xen 3.2 on CentOs 5.2 kernel panic /dev/root problem

["--[ UxBoD ]--" <uxbod@xxxxxxxxxxxx>]

You may be better off using the source .rpm instead.  I built 3.2 from this and 
it is working a treat.

Regards,

-- 
--[ UxBoD ]--
// PGP Key: "curl -s http://www.splatnix.net/uxbod.asc | gpg --import"
// Fingerprint: F57A 0CBD DD19 79E9 1FCC A612 CB36 D89D 2C5A 3A84
// Keyserver: www.keyserver.net Key-ID: 0x2C5A3A84
// Phone: +44 845 869 2749 SIP Phone: uxbod@xxxxxxxxxxxxxxxx

----- boulayp@xxxxxxx wrote:

> I have the following issue with Xen 3.2 on my Centos 5.1 box
> I donnot use LVM nor sata
> only a simple IDE drive for my linux box
> 
> steps followd
> 
> mkdir build
> wget http://bits.xensource.com/oss-xen/release/3.2.0/xen-3.2.0.tar.gz
> tar xzf xen-3.2.0.tar.gz
> hg clone http://xenbits.xensource.com/linux-2.6.18-xen.hg
> cd xen-3.2.0
> make world
> make install
> mkinitrd -v -f --with=sd_mod --with=scsi_mod --preload sd_mod
> --preload scsi_mod
> /boot/initrd-2.6.18.8-xen.img 2.6.18.8-xen
> 
> my grub.conf
> 
> title Xen 3.2 / XenLinux 2.6
>        kernel /boot/xen-3.2.gz console=vga
>        module /boot/vmlinuz-2.6.18.8-xen root=LABEL=/1 ro
> console=tty0
>        module /boot/initrd-2.6.18.8-xen.img
> 
> 
> When I boot on the Xen Kernel it display a kernel panic message
> issue with /dev/root etc.
> 
> 
> home someone can help
> it's seems a not so uncommon issue now with 3.2
> patrick

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users