I am trying the start the configuration below. And it starts without
error. When I run xm console <cfg> . My ssh terminal freezes and
shows the output below. So my question is. What is the expected
behavior here. What am I supposed to see... A login prompt?? Any
advice on what to do next would be great.
sc
#
# Configuration file for the Xen instance ed.bos01.locamoda.net, created
# by xen-tools 3.5 on Mon Dec 17 17:12:13 2007.
#
#
# Kernel + memory size
#
kernel = '/boot/vmlinuz-2.6.22-14-xen'
ramdisk = '/boot/initrd.img-2.6.22-14-xen'
memory = '1024'
#
# Disk device(s).
#
root = '/dev/hda1 ro'
disk = [ 'file:/mnt/xen/domains/ed.bos01.locamoda.net/
disk.img,hda1,w', 'file:/mnt/xen/domains/ed.bos01.locamoda.net/
swap.img,hda2,w']
#
# Hostname
#
name = 'ed.bos01.locamoda.net'
#
# Networking
#
vif = [ 'ip=10.1.4.70' ]
#
# Behaviour
#
on_poweroff = 'destroy'
on_reboot = 'restart'
on_crash = 'restart'
root@virtual01:~#
Started domain ed
root@virtual01:~# xm console ed
[ 0.000000] Linux version 2.6.22-14-xen (buildd@crested) (gcc
version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP
Sun Oct 14 23:20:20 GMT 2007 (Unofficial)
[ 0.000000] Command line: root=/dev/hda1 ro
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 0000000040800000 (usable)
[ 0.000000] end_pfn_map = 264192
[10035.397853] Zone PFN ranges:
[10035.397856] DMA 0 -> 264192
[10035.397858] DMA32 264192 -> 264192
[10035.397860] Normal 264192 -> 264192
[10035.397861] early_node_map[1] active PFN ranges
[10035.397863] 0: 0 -> 264192
[10035.413186] No mptable found.
[10035.415729] PERCPU: Allocating 25096 bytes of per cpu data
[10035.415752] Built 1 zonelists. Total pages: 260580
[10035.415756] Kernel command line: root=/dev/hda1 ro
[10035.416270] Initializing CPU#0
[10035.416509] PID hash table entries: 4096 (order: 12, 32768 bytes)
[10035.416558] Xen reported: 1994.999 MHz processor.
[10035.416588] Console: colour dummy device 80x25
[10035.416953] Dentry cache hash table entries: 131072 (order: 8,
1048576 bytes)
[10035.417245] Inode-cache hash table entries: 65536 (order: 7, 524288
bytes)
[10035.417344] Software IO TLB disabled
[10035.425729] Memory: 1003520k/1056768k available (2343k kernel code,
44572k reserved, 1193k data, 208k init)
[10035.425771] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4,
CPUs=1, Nodes=1
[10035.492595] Calibrating delay using timer specific routine..
3992.10 BogoMIPS (lpj=7984214)
[10035.492633] Security Framework v1.0.0 initialized
[10035.492645] SELinux: Disabled at boot.
[10035.492658] Mount-cache hash table entries: 256
[10035.492789] CPU: L1 I cache: 32K, L1 D cache: 32K
[10035.492796] CPU: L2 cache: 4096K
[10035.492807] CPU: Physical Processor ID: 1
[10035.492811] CPU: Processor Core ID: 3
[10035.492817] SMP alternatives: switching to UP code
[10035.493178] Freeing SMP alternatives: 23k freed
[10035.493291] Early unpacking initramfs... done
[10035.509504] Brought up 1 CPUs
[10035.510113] NET: Registered protocol family 16
[10035.510906] Brought up 1 CPUs
[10035.510922] PCI: Fatal: No config space access function found
[10035.510925] PCI: setting up Xen PCI frontend stub
[10035.511316] ACPI: Interpreter disabled.
[10035.511322] Linux Plug and Play Support v0.97 (c) Adam Belay
[10035.511331] pnp: PnP ACPI: disabled
[10035.511482] xen_mem: Initialising balloon driver.
[10035.512553] Setting mem allocation to 1048576 kiB
[10035.512634] PCI: System does not support PCI
[10035.512639] PCI: System does not support PCI
[10035.512660] NET: Registered protocol family 8
[10035.512665] NET: Registered protocol family 20
[10035.512949] NET: Registered protocol family 2
[10035.516053] Time: xen clocksource has been installed.
[10035.544081] IP route cache hash table entries: 32768 (order: 6,
262144 bytes)
[10035.544187] TCP established hash table entries: 131072 (order: 9,
3145728 bytes)
[10035.545332] TCP bind hash table entries: 65536 (order: 8, 1048576
bytes)
[10035.545766] TCP: Hash tables configured (established 131072 bind
65536)
[10035.545772] TCP reno registered
[10035.556176] checking if image is initramfs... it is
[10035.573030] Freeing initrd memory: 19572k freed
[10035.582390] audit: initializing netlink socket (disabled)
[10035.582416] audit(1197940020.580:1): initialized
[10035.583887] VFS: Disk quotas dquot_6.5.1
[10035.583928] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[10035.584002] io scheduler noop registered
[10035.584007] io scheduler anticipatory registered
[10035.584010] io scheduler deadline registered
[10035.584100] io scheduler cfq registered (default)
[10035.600817] rtc: IRQ 8 is not free.
[10035.600884] Linux agpgart interface v0.102 (c) Dave Jones
[10035.601305] RAMDISK driver initialized: 16 RAM disks of 65536K size
1024 blocksize
[10035.601464] input: Macintosh mouse button emulation as /class/input/
input0
[10035.601510] xencons_init: Initializing xen vfb; pass xencons=tty to
prevent this
[10035.601574] Xen virtual console successfully installed as xvc0
[10035.601637] Event-channel device installed.
[10035.615310] netfront: Initialising virtual ethernet driver.
[10035.615880] PNP: No PS/2 controller found. Probing ports directly.
[10035.616714] i8042.c: No controller found.
[10035.616828] mice: PS/2 mouse device common for all mice
[10035.616959] TCP cubic registered
[10035.617025] NET: Registered protocol family 1
[10035.617130] xen-vbd: registered block device major 3
[10035.617146] blkfront: hda1: barriers enabled
[10035.617724] blkfront: hda2: barriers enabled
[10035.620671] netfront: device eth0 has copying receive path.
[10035.716083] XENBUS: Device with no driver: device/console/0
[10035.716101] /build/buildd/linux-source-2.6.22-2.6.22/debian/build/
custom-source-xen/drivers/rtc/hctosys.c: unable to open rtc device
(rtc0)
[10035.716123] Freeing unused kernel memory: 208k freed
[10035.898965] AppArmor: AppArmor
initialized<5>audit(1197940020.896:2): type=1505 info="AppArmor
initialized" pid=993
[10035.905852] fuse init (API version 7.8)
[10035.911818] Failure registering capabilities with primary security
module.
[10035.948567] thermal: Unknown symbol acpi_processor_set_thermal_limit
[10036.271096] EXT3-fs: INFO: recovery required on readonly filesystem.
[10036.271108] EXT3-fs: write access will be enabled during recovery.
[10036.319600] kjournald starting. Commit interval 5 seconds
[10036.319619] EXT3-fs: recovery complete.
[10036.331163] EXT3-fs: mounted filesystem with ordered data mode.
[10036.540781] Adding 1048568k swap on /dev/hda2. Priority:-1 extents:
1 across:1048568k
[10036.561380] EXT3 FS on hda1, internal journal
[10036.699790] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12)
initialised: dm-devel@xxxxxxxxxx
[10037.154599] NET: Registered protocol family 10
[10037.154682] lo: Disabled Privacy Extensions
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
| 
Home