Hello Emre,
These devices do not exist in dom1.
Can I create them manually? Or do I need to install additional packages.
Uups: I've just seen that there is a typo in my first post - dom1 is running Debian Etch and not Ubuntu. Sorry about that!
Thanks and regards, Markus
On 06.12.2007, at 11:08, Emre Erenoglu wrote: Markus,
Does it really not exist or just not formatted?
mkfs.ext3 /dev/sda3
and instead of sda, I think you shall consider using xvda (if you're on a PV domU or HVM with PV drivers)
can you see these devices in /dev?
Emre
On Dec 6, 2007 10:51 AM, Markus Gerber < markus@xxxxxxxxxxxxx> wrote: Hello,
Thank you for your tipp. Unfortunatly, I get an error when booting dom1 saying:
Loading device-mapper support. Checking file systems...fsck 1.40-WIP (14-Nov-2006) fsck.ext3: No such file or directory while trying to open /dev/sda3 /dev/sda3: The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device>
fsck died with exit status 8 failed (code 8). * File system check failed.
In my dom1's config file I added the last 'phy' to the disk disk = [ 'phy:data/dom1-disk,sda1,w', 'phy:data/dom1-swap,sda2,w', 'phy:/dev/mapper/data-share,sda3,w' ]
How does the /etc/fstab in dom1 has to look like? I added: /dev/sda3 /mnt/share ext3 defaults 0 1
With the line above it does not work. /dev/sda3 does not exist.
Thank you for some more hints.
Regards, Markus
On 06.12.2007, at 10:13, Emre Erenoglu wrote: Just a disk= line would suffice. example:
disk = [ 'phy:/dev/volume-group/volume-name,hda1,w' , 'phy:/dev/md1,hda2,w' , 'phy:/dev/volume-group/volume-2,hda3,w' ]
/dev/volume-group/volume-name being one of your LVM volume. (or /dev/mapper/volume_group-volume_name
Br,
Emre
On Dec 6, 2007 9:37 AM, Markus Gerber < markus@xxxxxxxxxxxxx> wrote: Hello,
In my dom0 (Ubuntu 7.10) I have several LVM partitions (for mp3s,
photos, ...).
Since I do not want to have any services in dom0, I have a domU (also
Ubuntu 7.10) with Samba. So my users connect to that domU. How can I
export and import these LVM partitions from dom0 into domU?
Using nfs could work, but I prefer a solution where my LVM partitions
are 'natively' in domU.
Thank you for some hints and tipps.
Regards,
Markus
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
--
Emre Erenoglu
erenoglu@xxxxxxxxx
--
Emre Erenoglu
erenoglu@xxxxxxxxx
|
Home
