| |
|
 |
|
 |
|
|
|
| |
|
|
xen-users
RE: [Xen-users] Storage for DomU
Ok will just check the options suggested and will update you.
Thanks and regards
Ashit
-----Original Message-----
From: Petersson, Mats [mailto:Mats.Petersson@xxxxxxx]
Sent: Wednesday, April 11, 2007 3:20 PM
To: Ashit Kumar; xen-users@xxxxxxxxxxxxxxxxxxx
Subject: RE: [Xen-users] Storage for DomU
> -----Original Message-----
> From: Ashit Kumar [mailto:Ashit_Kumar@xxxxxxxxxxxx]
> Sent: 11 April 2007 10:44
> To: Petersson, Mats; xen-users@xxxxxxxxxxxxxxxxxxx
> Subject: RE: [Xen-users] Storage for DomU
>
>
> I tried with the 'lspci' but it doesnot give any output.
Then it's not exported correctly (I'm 99% sure that's the case)!
> I tried to load the driver (QLA2200, Qlogic FC HBA) but this driver is
> only for RH and suse Linux not for Slackware.Any idea.
Hmm. So this is a driver that is delivered as a module, not as
source-code? In that case I'd recommend one of the following options (in
no particular order):
1. Find a different hardware vendor that has a open-source driver.
2. Use one of the hardware vendors preferred distros.
3. Try to find a slackware version of the driver.
> I also have another VM installed on the same host with RHEL. But
> changing the config file present at /SRxxx/SRM/configs doesnot show
> this pci Device in the 'xm list -l' output.
Is this a PV or HVM domain? You can't export PCI devices to HVM domains.
Other than that, I can't see how one would work and the other not.
--
Mats
> Can I do something for this RHEL DomainU?
>
> Thanks and regards
> Ashit
>
> -----Original Message-----
> From: Petersson, Mats [mailto:Mats.Petersson@xxxxxxx]
> Sent: Wednesday, April 11, 2007 3:08 PM
> To: Ashit Kumar; xen-users@xxxxxxxxxxxxxxxxxxx;
> xen-tools@xxxxxxxxxxxxxxxxxxx
> Cc: xen-tools-request@xxxxxxxxxxxxxxxxxxx
> Subject: RE: [Xen-users] Storage for DomU
>
>
>
> > -----Original Message-----
> > From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
> > [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Ashit
> > Kumar
> > Sent: 11 April 2007 10:26
> > To: xen-users@xxxxxxxxxxxxxxxxxxx; xen-tools@xxxxxxxxxxxxxxxxxxx
> > Cc: xen-tools-request@xxxxxxxxxxxxxxxxxxx
> > Subject: [Xen-users] Storage for DomU
> >
> > Hi all,
> > I manage to create a VM (slackware image) and hide the PCI device
> > (qlogic HBA) from Dom0 to DomainU.
> > Now the Dom0 cant see this HBA and the 'xm list -l' shows this pci
> > device under the DomainU.
> > But how can I do some scsi inquiry or check if this PCI device is
> > visible to the DomainU from the DomainU's console.
> > Any help?
>
> "lspci" should show this device and not much else in your DomU (as
> DomU's can't see devices that haven't been given to them, it will only
> show [I think] a few "fake" devices that Xen uses for it's drivers).
>
> The other idea is of course to load the correct driver for the device
> (e.g. modprobe drivername). I don't know what the name of the driver
> is, but it should work.
>
> --
> Mats
> > Thanks and regards
> > Ashit
> >
> >
>
>
>
>
>
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
| |
|
Home