Re: [Xen-users] xen on Debian amd64 + Windows XP 32-bit

[Konstantinos Pachopoulos <kostaspaxos@xxxxxxxx>]

Hi,
i did the suggested changes to the domain config file
(disabled the APIC first and as an extra the ACPI
later). I also changed the cdrom parameter. The only
difference now is that after the "xm create winxp",
the white window lasts much longer and ends by giving
an :
"Error: Device 5632 (vbd) could not be connected.
Backend device not found."
I read, that this message could be given if running
many domains simultaneously, but i try to run only
this one.

I edited the config file to the following:
-----------------------------------------------
vakhos:~# cat /etc/xen/winxp
kernel = "/usr/lib/xen/boot/hvmloader"
builder='hvm'
memory = 512
name = "winxp"
#disk = [ 'phy:xendoms/winxp,ioemu:hda,w' ]
#vif = [ 'type=ioemu, bridge=xenbr0' ]
device_model = '/usr/lib/xen/bin/qemu-dm'
memmap = '/usr/lib/xen/boot/mem-map.sxp'
#cdrom='/vservers/home/shared/winxp.iso'
disk = [ 'phy:xendoms/winxp,hda,w',
'file:/vservers/home/shared/winxp.iso,hdc:cdrom,r' ]
boot='d'
sdl=1
vnc=0
acpi=0
apic=0
-----------------------------------------------


xm dmesg output:
-----------------------------------------------
(XEN) Command line: /xen-3.0.3-1-amd64.gz
(XEN) Physical RAM map:
(XEN)  0000000000000000 - 000000000009dc00 (usable)
(XEN)  000000000009dc00 - 00000000000a0000 (reserved)
(XEN)  00000000000e4000 - 0000000000100000 (reserved)
(XEN)  0000000000100000 - 00000000cffb0000 (usable)
(XEN)  00000000cffb0000 - 00000000cffbe000 (ACPI data)
(XEN)  00000000cffbe000 - 00000000cffe0000 (ACPI NVS)
(XEN)  00000000cffe0000 - 00000000d0000000 (reserved)
(XEN)  00000000fec00000 - 00000000fec01000 (reserved)
(XEN)  00000000fecc0000 - 00000000fecc1000 (reserved)
(XEN)  00000000ff780000 - 0000000100000000 (reserved)
(XEN)  0000000100000000 - 0000000130000000 (usable)
(XEN) System RAM: 4095MB (4193588kB)
(XEN) Xen heap: 13MB (14328kB)
(XEN) found SMP MP-table at 000ff780
(XEN) DMI present.
(XEN) Using APIC driver default
(XEN) ACPI: SLIC (v001 NEC             0x02000709 MSFT
0x00000097) @ 0x00000000cffb0440
(XEN) ACPI: OEMB (v001 A_M_I_ AMI_OEM  0x02000709 MSFT
0x00000097) @ 0x00000000cffbe040
(XEN) ACPI: HPET (v001 A_M_I_ OEMHPET  0x02000709 MSFT
0x00000097) @ 0x00000000cffb5400
(XEN) ACPI: DSDT (v001  A0498 A0498000 0x00000000 INTL
0x20060113) @ 0x0000000000000000
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00]
enabled)
(XEN) Processor #0 15:11 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01]
enabled)
(XEN) Processor #1 15:11 APIC version 16
(XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000]
gsi_base[0])
(XEN) IOAPIC[0]: apic_id 2, version 3, address
0xfec00000, GSI 0-23
(XEN) ACPI: IOAPIC (id[0x03] address[0xfecc0000]
gsi_base[24])
(XEN) IOAPIC[1]: apic_id 3, version 3, address
0xfecc0000, GSI 24-47
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2
dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9
low level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode:  Flat.  Using 2 I/O APICs
(XEN) ACPI: HPET id: 0x11068201 base: 0xfed00000
(XEN) Using ACPI (MADT) for SMP configuration
information
(XEN) CPU: L2 Cache: 512K (64 bytes/line)
(XEN) CPU 0(2) -> Core 0
(XEN) AMD SVM Extension is enabled for cpu 0.
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#0.
(XEN) CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor
3800+ stepping 02
(XEN) Booting processor 1/1 eip 90000
(XEN) Initializing CPU#1
(XEN) CPU1: AMD Flush Filter disabled
(XEN) CPU: L1 I Cache: 64K (64 bytes/line), D cache
64K (64 bytes/line)
(XEN) CPU: L2 Cache: 512K (64 bytes/line)
(XEN) CPU 1(2) -> Core 1
(XEN) AMD: Disabling C1 Clock Ramping Node #0
(XEN) AMD SVM Extension is enabled for cpu 1.
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#1.
(XEN) checking TSC synchronization across 2 CPUs: 
(XEN) CPU#0 had 318 usecs TSC skew, fixed it up.
(XEN) CPU#1 had -318 usecs TSC skew, fixed it up.
(XEN) Platform timer is 14.318MHz HPET
(XEN) Brought up 2 CPUs
(XEN) Machine check exception polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Domain 0 kernel supports features = { 0000001f
}.
(XEN) Domain 0 kernel requires features = { 00000000
}.
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN)  Dom0 alloc.:  
0000000006000000->0000000008000000 (988709 pages to be
allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN)  Loaded kernel:
ffffffff80200000->ffffffff805995b0
(XEN)  Init. ramdisk:
ffffffff8059a000->ffffffff814b3600
(XEN)  Phys-Mach map: ffffffff814b4000->ffffff(XEN) 
Start info:    ffffffff81c50000->ffffffff81c5049c
(XEN)  Page tables:  
ffffffff81c51000->ffffffff81c64000
(XEN)  Boot stack:   
ffffffff81c64000->ffffffff81c65000
(XEN)  TOTAL:        
ffffffff80000000->ffffffff82000000
(XEN)  ENTRY ADDRESS: ffffffff80200000
(XEN) Dom0 has maximum 2 VCPUs
(XEN) Initrd len 0xf19600, start at 0xffffffff8059a000
(XEN) Scrubbing Free RAM:
.................................................done.
(XEN) Xen trace buffers: disabled
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three
times to switch input to Xen).
ff81c4f128
-----------------------------------------------


        
        
                
___________________________________________________________ 
New Yahoo! Mail is the ultimate force in competitive emailing. Find out more at 
the Yahoo! Mail Championships. Plus: play games and win prizes. 
http://uk.rd.yahoo.com/evt=44106/*http://mail.yahoo.net/uk 

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users