> -----Original Message-----
> From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
> [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of
> Konstantinos Pachopoulos
> Sent: 02 April 2007 16:31
> To: xen-users@xxxxxxxxxxxxxxxxxxx
> Subject: [Xen-users] xen on Debian amd64 + Windows XP 32-bit
>
> Hi,
> i am trying to setup on a remote (ssh) Debian Etch
> amd64 system a Windows XP 32-bit domain. I have used
> the default packages provided by the Debian
> repository.
> "hvm" seems to be enabled on my AM2 Dual Core ASUS M2V
> system.
>
> vakhos:~# xm dmesg | grep HVM
> (XEN) (GUEST: 3) HVM Loader
> (XEN) (GUEST: 3) HVMAssist BIOS, 1 cpu, $Revision:
> 1.138 $ $Date: 2005/05/07 15:55:26 $
> (XEN) (GUEST: 4) HVM Loader
> (XEN) (GUEST: 4) HVMAssist BIOS, 1 cpu, $Revision:
> 1.138 $ $Date: 2005/05/07 15:55:26 $
> (XEN) (GUEST: 5) HVM Loader
> (XEN) (GUEST: 5) HVMAssist BIOS, 1 cpu, $Revision:
> 1.138 $ $Date: 2005/05/07 15:55:26 $
> (XEN) (GUEST: 6) HVM Loader
> (XEN) (GUEST: 6) HVMAssist BIOS, 1 cpu, $Revision:
> 1.138 $ $Date: 2005/05/07 15:55:26 $
>
>
> The config file is the following:
> ----------------------------------------
> kernel = "/usr/lib/xen/boot/hvmloader"
> builder='hvm'
> memory = 512
> name = "winxp"
> disk = [ 'phy:xendoms/winxp,ioemu:hda,w' ]
> #vif = [ 'type=ioemu, bridge=xenbr0' ]
> device_model = '/usr/lib/xen/bin/qemu-dm'
> memmap = '/usr/lib/xen/boot/mem-map.sxp'
> cdrom='/vservers/home/shared/winxp.iso'
> boot='d'
> sdl=1
> vnc=0
> acpi=1
> apic=1
> ----------------------------------------
>
> When i do "xm create winxp", i get a white window at
> the beggining, then the qemu window and then the
> domain terminates. Unfortunately, the qemu window
> appears for much less than a second and it is not
> possible to provide any information about it.
> Any ideas?
>
>
There may be more information in the "xm dmesg", but my first
inclination would be to disable APIC (change apic=1 to apic=0 in the
configuration file shown above).
This is because the APIC version of Windows uses an instruction that
isn't supported by the older versions of Xen (older than a few weeks
that is). If that doesn't help, try a fresh reboot and send the output
from "xm dmesg" (if you know what to look for, just cut out the last
relevant lines of a recent one, but if you're not sure what's relevant
and what's not, just reboot the machine and send the whole thing).
--
Mats
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home