> -----Original Message-----
> From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
> [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of John Shen
> Sent: 16 March 2007 11:05
> To: xen-users@xxxxxxxxxxxxxxxxxxx
> Subject: Re: [Xen-users] dom0 networking disabled
>
> jez,
>
> I have had the exactly the same problem in Fedora Core 6,
> which uses /etc/sysconfig/network-scripts/ifcfg-eth0 etc to
> configure nics.
>
> when i copied your code to ifcfg-xbr0 and tried ifup xbr0, i
> got errors saying command bridge_ports not found.
You probably need to install "bridge utils" (a package called
"bridge-utils-<ver>.i386.rpm").
--
Mats
>
> i would appreciate it very much for your help.
>
> Message: 2
> Date: Fri, 16 Mar 2007 05:40:13 +0100
> From: jez <jez@xxxxxxxxxx>
> Subject: Re: [Xen-users] dom0 networking disabled
> To: xen-users@xxxxxxxxxxxxxxxxxxx
> Message-ID: <20070316044013.GG18608@xxxxxxxxxxxxxxxxxx>
> Content-Type: text/plain; charset=us-ascii
>
> On Thu, Mar 15, 2007 at 06:57:52PM -0500, kbrown@xxxxxxxxxxxxx wrote:
> >
> > I installed Debian Etch and the Xen (3.03) kernels /
> binaries on a Dell
> > server. It works fantastic with all the default
> configurations with one
> > strange flaw - as soon as the
> /etc/xen/scripts/network-bridge script runs,
> > dom0 loses all network connectivity. It is no longer
> possible to ping in
> > or out of the IP for the machine, and it throws no errors,
> just sits on a
> > blinking prompt.
> >
> > I have 4 domU machines running on 4 different IPs and they all work
> > perfectly, with perfect connectivity. All the default
> configuration files
> > seem correct, and there are no firewall problems that I can
> see. Nothing
> > gets in or out of dom0, though, from anywhere. Running
> > '/etc/xen/scripts/network-bridge stop' will return eth0 to
> its former
> > state and everything starts working again.
> >
> > So either I'm missing something very obvious, or something
> is very wrong -
> > I've attached several readouts below, but let me know if
> any other info
> > would be helpful in solving this thing, its had us stumped
> and seems to be
> > the only thing keeping us from putting this box into production.
> >
> > Thanks for any insight,
> >
> > Kirk
> >
>
> Hi Kirk
>
> I've looked through the information that you posted but I can't see
> anything wrong with any of it.
>
> I reckon that you should bypass the network-bridge script and just use
> your own bridge set up in /etc/network/interfaces. It's
> insanely easy to
> set up, and if nothing else it might shed some more light on your
> predicament.
>
> Here are the steps to take:
>
> 1. Change your /etc/network/interfaces to look like this.
> Make sure you
> remove or comment out your previous eth0 entry:
>
> auto lo
> iface lo inet loopback
>
> auto xbr0
> iface xbr0 inet static
> address 146.6.135.253
> netmask 255.255.255.0
> gateway 146.6.135.1 # <- put your gateway here
> bridge_ports eth0
>
> 2. Change your xend-config.sxp to read:
>
> (network-script network-dummy)
> (vif-script vif-bridge)
>
> 3. Double check that the settings for xbr0 in /etc/network/interfaces
> are exactly the same as eth0 previously had. Then when you are
> satisfied, reboot.
>
> If your computer resurfaces, and you can contact it over the network,
> then the bridge is up. If not, well eh ... you're own your own mate!
>
> Now when you start each of the DomU's xen should put the vif*.0
> interfaces on your bridge. All in all, I think you'll find that
> this is a much more transparent configuration.
>
> Let us know how you get on.
>
> jez
>
> John Shen
> System Coordinator, Online Information System
> Student Affairs, University of California, Office of the President
>
>
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home