Hello,
Could you specify the exact model of your quad-core xeon cpu please?
I'm looking for VT processors well recognized.
Is it a Xeon E5300, or Xeon X5300 family?
Thanks for your answer, and sorry not to help with your issue.
Jordi Segues
On 2/15/07, Simons IT-Service <info@xxxxxxxxxxxxxxxxxxxx> wrote:
Am Donnerstag, den 15.02.2007, 12:26 +0800 schrieb Tim Post:
> On Wed, 2007-02-14 at 17:20 +0100, Simons IT-Service wrote:
> > Hello,
> >
> > I have a server with 4GB of Memory, two Intel QuadCore Xeon CPUs and a LSI
FibreChannel 4GBit HBA Card connected to a SAN-Box.
> >
> > When I install this with a normal Linux (CentOS 4.4) with kernel
2.6.9-42.0.3.ELsmp and the mptfc driver, which is deliverd with this kernel,
everything works fine.
> >
> > I can copy a 600 MB file from one directory to an other on the same
partition in 6 seconds.
> >
> > When I install on the same server a Xen-kernel (2.6.16.29-xen) with the
mptfc driver, which is deliverd with this kernel, the I/O performance to the SAN is
very,very,very slow.
> >
> > When I copy in a domU a 600 MB file from one directory to an other on the
same partition it take 90 seconds.
> >
> > The config file for the disk in my domU is this:
> >
> > disk = [ 'phy:/dev/OracleVG/OraAdmin10gR2,/dev/sda1,w',
'phy:/dev/OracleVG/OraDumps10gR2,/dev/sda2,w',
'phy:/dev/OracleVG/OraProduct10gR2,/dev/sda3,w',
'phy:/dev/OracleVG/OraSoftware10gR2,/dev/sda4,w',
'phy:/dev/OraDataVG/pdevkh1,/dev/sdb1,w', 'phy:/dev/OraDataVG/pskh,/dev/sdb2,w',
'phy:/dev/OraDataVG/temp,/dev/sdb3,w', 'phy:/dev/sda13,/dev/sdc1,w' ]
> >
>
> I'm not 100% sure its going to *significantly* improve things, but
> giving the dom-u some swap space may help, unless this one :
>
> 'phy:/dev/sda13,/dev/sdc1,w'
>
> is handling swap locally, but it looks like it may be the boot vbd,
> unless sda1 also contains the root filesystem for the guest?
>
> Best,
> --Tim
>
Hello Tim,
thanks for your answer.
Every DomU in my solution have a 2 GB Swap
('phy:/dev/sda13,/dev/sdc1,w') for him self.
And every Dom0 and DomU boot over NFS, I use openQRM 3.1.2 from
www.openqrm.org
Any idea?
Best
Dietmar Simons
(Neuss, Germany)
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Scanned with Copfilter Version 0.83beta3a (ProxSMTP 1.4)
by Markus Madlener @ http://www.copfilter.org
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home