Re: [Xen-users] Errors installing WinXP with Xen 3.0.3

["Paul O'Rorke" <paul@xxxxxxxxxxxxxx>]

Where is this user manual?  I've looked all over the xensource site and 
I can't find it.  I might not be the smartest cookie in the jar, but it 
shouldn't be that hard to find.  What does 'You'll have to move the 
cdrom line to the disk array in your config file.' actually mean?
Eric Benton wrote:
> Hi,
>
> You'll have to move the cdrom line to the disk array in your config file.
> It is documented in the user manual.
>
> Eric
>
> On 10/27/06, *Simon Gao * <gao@xxxxxxxxxxxxxxx 
> <mailto:gao@xxxxxxxxxxxxxxx>> wrote:
>     Hi,
>
>     I am having this error while trying to install Windows XP with Xen
>     3.0.3. The OS is CentOS 4.4.
>
>     On the SDL windows,
>     ====================================================
>     Plex86/Bochs VGABios current-cvs 26 Oct 2006
>     This VGA/VBE Bios is released under GNU LGPL.
>
>     Please visit:
>         . http://bochs.sourceforge.net
>         . http://www.nongnu.org/vgabios <http://www.nongnu.org/vgabios>
>
>     cirrus-compatible VGA is detected
>
>     HVMAssist BIOS, 1 cpu, $Revision: 1.138 $ $Date: 2005/05/07 15:55:26 $
>
>     ata0 master: QEMU HARDDISK ATA-7 Hard-disk (4096 MBytes)
>     ata0   slave: Unknown device
>
>     CDROM boot failure code: 0002
>     Boot from CD-Rom failed
>     FATAL: Could not read the boot disk
>     =====================================================
>
>     $ xm demsg
>     ......
>     (XEN) vmx_do_launch(): GUEST_CR3<=6a57d000, HOST_CR3<=6a57e000
>     (XEN) (GUEST: 1) HVM Loader
>     (XEN) (GUEST: 1) Detected Xen v3.0.3-0
>     (XEN) (GUEST: 1) Writing SMBIOS tables ...
>     (XEN) (GUEST: 1) Loading ROMBIOS ...
>     (XEN) (GUEST: 1) Loading Cirrus VGABIOS ...
>     (XEN) (GUEST: 1) Loading VMXAssist ...
>     (XEN) (GUEST: 1) VMX go ...
>     (XEN) (GUEST: 1) VMXAssist (Oct 26 2006)
>     (XEN) (GUEST: 1) Memory size 512 MB
>     (XEN) (GUEST: 1) E820 map:
>     (XEN) (GUEST: 1) 0000000000000000 - 000000000009F000 (RAM)
>     (XEN) (GUEST: 1) 000000000009F000 - 00000000000A0000 (Reserved)
>     (XEN) (GUEST: 1) 00000000000A0000 - 00000000000C0000 (Type 16)
>     (XEN) (GUEST: 1) 00000000000F0000 - 0000000000100000 (Reserved)
>     (XEN) (GUEST: 1) 0000000000100000 - 000000001FFF0000 (RAM)
>     (XEN) (GUEST: 1) 000000001FFF0000 - 000000001FFFA000 (ACPI Data)
>     (XEN) (GUEST: 1) 000000001FFFA000 - 000000001FFFD000 (ACPI NVS)
>     (XEN) (GUEST: 1) 000000001FFFD000 - 000000001FFFE000 (Type 19)
>     (XEN) (GUEST: 1) 000000001FFFE000 - 000000001FFFF000 (Type 18)
>     (XEN) (GUEST: 1) 000000001FFFF000 - 0000000020000000 (Type 17)
>     (XEN) (GUEST: 1) 00000000FEC00000 - 0000000100000000 (Type 16)
>     (XEN) (GUEST: 1)
>     (XEN) (GUEST: 1) Start BIOS ...
>     (XEN) (GUEST: 1) Starting emulated 16-bit real-mode: ip=F000:FFF0
>     (XEN) (GUEST: 1)  rombios.c ,v 1.138 2005/05/07 15:55:26 vruppert
>     Exp $
>     (XEN) (GUEST: 1) Remapping master: ICW2 0x8 -> 0x20
>     (XEN) (GUEST: 1) Remapping slave: ICW2 0x70 -> 0x28
>     (XEN) (GUEST: 1) VGABios $Id: vgabios.c,v 1.61 2005/05/24 16:50:50
>     vruppert Exp $
>     (XEN) (GUEST: 1) HVMAssist BIOS, 1 cpu, $Revision: 1.138 $ $Date:
>     2005/05/07 15:55:26 $
>     (XEN) (GUEST: 1)
>     (XEN) (GUEST: 1) ata0-0: PCHS=8322/16/63 translation=lba
>     LCHS=522/255/63
>     (XEN) (GUEST: 1) ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (4096
>     MBytes)
>     (XEN) (GUEST: 1) ata0  slave: Unknown device
>     (XEN) (GUEST: 1)
>     (XEN) (GUEST: 1) CDROM boot failure code : 0002
>     (XEN) (GUEST: 1) Boot from CD-Rom failed
>     (XEN) (GUEST: 1) FATAL: Could not read the boot disk
>     (XEN) (GUEST: 1) Unknown opcode at F000:09E1=0xF09E1
>     (XEN) (GUEST: 1) Halt called from %eip 0xD384A
>
>     The machine does have Intel-VT support.
>
>     $ cat /etc/xen/winxp
>     ================================================
>     kernel = "/usr/lib/xen/boot/hvmloader"
>     builder='hvm'
>     memory = 512
>     name = "WinXP"
>     vif = [ 'type=ioemu, bridge=xenbr0' ]
>     disk = [ 'file:/opt/xvms/windisk.img,ioemu:hda,w' ]
>     on_poweroff = 'destroy'
>     on_reboot   = 'destroy'
>     on_crash    = 'destroy'
>     device_model = '/usr/lib/xen/bin/qemu-dm'
>     cdrom='/opt/iso/winxp/winxp_sp2.iso'
>     boot='d'
>     sdl=1
>     vnc=0
>     vncviewer=0
>     ===============================================
>
>     Do I miss anything or configure something right?
>
>     Simon
>
>     _______________________________________________
>     Xen-users mailing list
>     Xen-users@xxxxxxxxxxxxxxxxxxx <mailto:Xen-users@xxxxxxxxxxxxxxxxxxx>
>     http://lists.xensource.com/xen-users
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users