WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

Re: [Xen-users] HD timeouts with busy xen domains

To: Rick van der LInde <h.r.vanderlinde@xxxxxxxxxx>
Subject: Re: [Xen-users] HD timeouts with busy xen domains
From: Itai Tavor <itai@xxxxxxxxxxxx>
Date: Thu, 11 May 2006 17:58:53 +1000
Cc: xen-users@xxxxxxxxxxxxxxxxxxx
Delivery-date: Thu, 11 May 2006 00:59:55 -0700
Envelope-to: www-data@xxxxxxxxxxxxxxxxxx
In-reply-to: <4462E652.10407@xxxxxxxxxx>
List-help: <mailto:xen-users-request@lists.xensource.com?subject=help>
List-id: Xen user discussion <xen-users.lists.xensource.com>
List-post: <mailto:xen-users@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=unsubscribe>
References: <9DBABA41-0F95-44DD-B742-2D3B23BF8983@xxxxxxxxxxxx> <4462E652.10407@xxxxxxxxxx>
Sender: xen-users-bounces@xxxxxxxxxxxxxxxxxxx

On 11/05/2006, at 5:22 PM, Rick van der LInde wrote:

Itai Tavor wrote:

Hi,

Now that I've got that 3-day-long, let's-waste-some-time-with-a- broken-dom0 episode, I can get back to the real problems that are preventing me from getting any use out of my Xen-based server.

What is happening, basically, is that as soon as some guest domains get busy, the hard disks go south for the winter.

I know this is not really a Xen issue (at least not directly) but as the problem only happens in a Xen setup, I thought I'd try to ask about it here.

The server has four SATA hard disks. It has worked with the same hardware setup for many months, with processor- and disk- intensive applications, with no problems. Now, I can start dom0 and guest domains with no problem, and they run fine as long as they don't try to do a lot. But as soon as they get busy - say, compiling something - the console shows an endless stream of:

ata1: command 0x35 timeout, stat 0x50 host_stat 0x64
ata2: command 0x25 timeout, stat 0x50 host_stat 0x64
ata4: command 0x35 timeout, stat 0x50 host_stat 0x4

And the system stops responding, until I reset the server or throw it out the window (well, not yet, but it's coming).

I've seen posts saying that these errors are related to APIC, so I tried adding "noapic acpi=off" to the dom0 kernel command line. No change.

If anyone's wondering why ata3 isn't in the list... it's a different drive - a 250GB WD while 1, 2 and 4 are 400GB Seagates. Interesting?

Any ideas/suggestions?

Hi,

Are you working with an ICH6 or ICH7 chipset for SATA connections. If zo. check your BIOS settings (IDE Operation Mode). I've experienced this before. Somehow the Enhanced Mode setting can cause troubles. You can have it set to "Enhanced Mode", but need to make sure only SATA is enabled (not SATA + PATA). After setting this to SATA, the PATA devices are still accessible and the timeou problems disappeared for me.

Hope this may help you.

Thanks, Rick, but no luck... my drives are on silicon Image chips, separate from the IDE controller.

Itai

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users