|
|
|
|
|
|
|
|
|
|
xen-users
[Xen-users] Network Problem in domU under OpenSUSE 10.0
Hi All,
Now that I've got my domU running under OpenSUSE 10.0 I have an issue with
setting up eth0 in the domU.
The xenbr0 bridge is setup correctly in the dom0:
# mnemosyne:/etc/xen # brctl show
bridge name bridge id STP enabled interfaces
xenbr0 8000.feffffffffff no vif0.0
peth0
vif4.0
However, there is only the lo interface in domU:
xenos10:/etc/sysconfig/network # ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:13 errors:0 dropped:0 overruns:0 frame:0
TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1135 (1.1 Kb) TX bytes:1135 (1.1 Kb)
The contents of /etc/sysconfig/network in the domU is:
xenos10:/etc/sysconfig/network # ls
. config if-down.d ifcfg-lo ifroute-lo scripts
. dhcp if-up.d ifcfg.template providers wireless
However, executing rcnetwork restart in the domU produces the following:
xenos10:/etc/sysconfig/network # rcnetwork restart
Shutting down network interfaces:
eth1
eth1 No configuration found for eth1
Nevertheless the interface will be shut down.
eth1 configuration: done
veth0
veth0 No configuration found for veth0
Nevertheless the interface will be shut down.
veth0 configuration: done
veth1
veth1 No configuration found for veth1
Nevertheless the interface will be shut down.
veth1 configuration: done
veth2
veth2 No configuration found for veth2
Nevertheless the interface will be shut down.
veth2 configuration: done
veth3
veth3 No configuration found for veth3
Nevertheless the interface will be shut down.
veth3 configuration: done
veth4
veth4 No configuration found for veth4
Nevertheless the interface will be shut down.
veth4 configuration: done
veth5
veth5 No configuration found for veth5
Nevertheless the interface will be shut down.
veth5 configuration: done
veth6
veth6 No configuration found for veth6
Nevertheless the interface will be shut down.
veth6 configuration: done
veth7
veth7 No configuration found for veth7
Nevertheless the interface will be shut down.
veth7 configuration: done
vif0.0
vif0.0 No configuration found for vif0.0
Nevertheless the interface will be shut down.
vif0.0 configuration: done
vif0.1
vif0.1 No configuration found for vif0.1
Nevertheless the interface will be shut down.
vif0.1 configuration: done
vif0.2
vif0.2 No configuration found for vif0.2
Nevertheless the interface will be shut down.
vif0.2 configuration: done
vif0.3
vif0.3 No configuration found for vif0.3
Nevertheless the interface will be shut down.
vif0.3 configuration: done
vif0.4
vif0.4 No configuration found for vif0.4
Nevertheless the interface will be shut down.
vif0.4 configuration: done
vif0.5
vif0.5 No configuration found for vif0.5
Nevertheless the interface will be shut down.
vif0.5 configuration: done
vif0.6
vif0.6 No configuration found for vif0.6
Nevertheless the interface will be shut down.
vif0.6 configuration: done
vif0.7
vif0.7 No configuration found for vif0.7
Nevertheless the interface will be shut down.
vif0.7 configuration: done
Shutting down service network . . . . . . . . . . . . . done.
Setting up network interfaces:
lo
lo IP address: 127.0.0.1/8 done
eth1
eth1 No configuration found for eth1 unused
veth0
veth0 No configuration found for veth0 unused
veth1
veth1 No configuration found for veth1 unused
veth2
veth2 No configuration found for veth2 unused
veth3
veth3 No configuration found for veth3 unused
veth4
veth4 No configuration found for veth4 unused
veth5
veth5 No configuration found for veth5 unused
veth6
veth6 No configuration found for veth6 unused
veth7
veth7 No configuration found for veth7 unused
vif0.0
vif0.0 No configuration found for vif0.0 unused
vif0.1
vif0.1 No configuration found for vif0.1 unused
vif0.2
vif0.2 No configuration found for vif0.2 unused
vif0.3
vif0.3 No configuration found for vif0.3 unused
vif0.4
vif0.4 No configuration found for vif0.4 unused
vif0.5
vif0.5 No configuration found for vif0.5 unused
vif0.6
vif0.6 No configuration found for vif0.6 unused
vif0.7
vif0.7 No configuration found for vif0.7 unused
Setting up service network . . . . . . . . . . . . . . done.
Is this normal?
I have tried using ifconfig eth0 192.168.0.3 up in the domU but get an error
that the device does not exist.
I thought that a network interface would be created in the domU due to the vif
line in the domU config file?
How can I create eth0 in the domU?
Thanks again,
Steve.
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Xen-users] Network Problem in domU under OpenSUSE 10.0,
higgers <=
|
|
|
|
|