Hi Kris,
One doc that helped me a lot was this
http://wiki.xensource.com/xenwiki/HowToInstallXenOnSlackware?highlight=%28slackware%29
it explains a bit. If eth1 is a real nic, then things should work,
however in case you have two nice etho, and eth1, the bridging wouldnt
work (IMHO)...
you can try natting, without DHCP, and snat from vifx.0 which to me
seems easier.
regards
On 2/3/06, Kris Hollingsworth <Kris@xxxxxxxxxx> wrote:
>
>
> Hi, I'm setting up my first xen machine, and I'm trying to setup two Virtual
> Machines, each mapped to a physical adapter on a different network.
>
> The virtual machine mapped to xen-br0 and eth0 works fine. However, when I
> bring up a VM with this configuration file:
>
> -----------------
> name = "test77"
> kernel = "/boot/vmlinuz-2.6.11.12-xenU"
> root = "/dev/hda1"
> memory = 64
> disk =
> ['file:/vserver/images/vmPROD.img,hda1,w','file:/vserver/images/vmPROD-swap.img,hda2,w']
>
> #Network:
> nics=1
> dhcp="off"
> ip="192.168.1.80"
> netmask="255.255.255.0"
> gateway="192.168.1.1"
> hostname="jidoorPROD"
> vif=[ 'bridge=xen-br1' ]
>
> extra="3"
> -----------------
>
> On the VM my ifconfig for eth0 looks correct:
> -----------------
> eth0 Link encap:Ethernet HWaddr AA:00:00:65:9A:F0
> inet addr:192.168.1.80 Bcase:192.168.1.255 Mask:255.255.255.0
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:31 errors:0 dropped:0 overruns:0 frame:0
> TX packets:110 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:2136 (2.0 KiB) TX bytes:9396 (9.1KiB)
> -----------------
>
> "brctl show" on the DOM0 HOST shows the xen-br1 bridge connected to eth1
> like it should be:
> -----------------
> xen-br1 8000.0012175a875c no eth1
> -----------------
>
> I'm able to get outside name resolution from the DOM0 Host, and my routing
> table looks like this:
>
> >From "netstat -r"
> -----------------
> 192.168.1.0 * 255.255.255.0 U 0 0 0
> xen-br1
> default 192.168.1.1 0.0.0.0 UG 0 0 0
> xen-br1
> -----------------
>
> I created the bridge using
> -----------------
> /etc/xen/scripts network start antispoof=no bridge=xen-br1 netdev=eth1
> -----------------
>
> I'm running Debian Sarge for both the DOM0 and DOMU's, and as I said, it
> works off of xen-br0 on the other network.
>
> If you can think of any other information relevant to this, let me know and
> I'll be happy to send it on. Any help is greatly appreciated, I've been
> working on this for several days now and can't for the life of me figure
> this out.
>
> -Kris Hollingsworth
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
>
>
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home