|
|
|
|
|
|
|
|
|
|
xen-users
RE: [Xen-users] SuSE 10 no network in dom0 - arp problem?
> Here it is:
Please can you try adding "export LANG=C" at the top of the network-bridge and
bif-bridge scripts.
The local language is breaking the parsing.
Thanks,
Ian
>
> eth0 Protokoll:Ethernet Hardware Adresse 00:0E:0C:72:41:41
> inet Adresse:192.168.2.128 Bcast:192.168.2.255 Maske:
> 255.255.255.0
> inet6 Adresse: fe80::20e:cff:fe72:4141/64
> Gültigkeitsbereich:Verbindung
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:7 errors:0 dropped:0 overruns:0 frame:0
> TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 Sendewarteschlangenlänge:0
> RX bytes:498 (498.0 b) TX bytes:2064 (2.0 Kb)
>
> lo Protokoll:Lokale Schleife
> inet Adresse:127.0.0.1 Maske:255.0.0.0
> inet6 Adresse: ::1/128 Gültigkeitsbereich:Maschine
> UP LOOPBACK RUNNING MTU:16436 Metric:1
> RX packets:107 errors:0 dropped:0 overruns:0 frame:0
> TX packets:107 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 Sendewarteschlangenlänge:0
> RX bytes:8414 (8.2 Kb) TX bytes:8414 (8.2 Kb)
>
> peth0 Protokoll:Ethernet Hardware Adresse FE:FF:FF:FF:FF:FF
> inet6 Adresse: fe80::fcff:ffff:feff:ffff/64
> Gültigkeitsbereich:Verbindung
> UP BROADCAST NOARP MULTICAST MTU:1500 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 Sendewarteschlangenlänge:1000
> RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
> Basisadresse:0x9000 Speicher:d6800000-d6820000
>
> vif0.0 Protokoll:Ethernet Hardware Adresse FE:FF:FF:FF:FF:FF
> inet6 Adresse: fe80::fcff:ffff:feff:ffff/64
> Gültigkeitsbereich:Verbindung
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:28 errors:0 dropped:0 overruns:0 frame:0
> TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 Sendewarteschlangenlänge:0
> RX bytes:2064 (2.0 Kb) TX bytes:588 (588.0 b)
>
> xenbr0 Protokoll:Ethernet Hardware Adresse FE:FF:FF:FF:FF:FF
> inet6 Adresse: fe80::200:ff:fe00:0/64
> Gültigkeitsbereich:Verbindung
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:27 errors:0 dropped:0 overruns:0 frame:0
> TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 Sendewarteschlangenlänge:0
> RX bytes:1596 (1.5 Kb) TX bytes:378 (378.0 b)
>
>
> Am 17.10.2005 um 13:16 schrieb Stephan Böni:
>
> > Please mail me your "ifconfig" output.
> >
> > Stephan
> >
> >
> >
> >> -----Ursprüngliche Nachricht-----
> >> Von: Robert Welz [mailto:r_welz@xxxxxx]
> >> Gesendet: Montag, 17. Oktober 2005 12:10
> >> An: Xen-users@xxxxxxxxxxxxxxxxxxx
> >> Betreff: [Xen-users] SuSE 10 no network in dom0 - arp problem?
> >>
> >>
> >> Hello.
> >> I have installed the SuSE Linux 10 XEN kernel but no domU
> yet. Now I
> >> cannot ping to and from dom0. I get lots of ARP broadcasts
> from dom0
> >> but dom0 seems to ignore ARP answers. When pinging to dom0
> it ignores
> >> arp requests. This happens regardless xend is running or not. This
> >> happens in the xen kernel only, when booting stock kernel
> all works
> >> as expected.
> >>
> >> What can I do?
> >>
> >> Robert
> >>
> >> _______________________________________________
> >> Xen-users mailing list
> >> Xen-users@xxxxxxxxxxxxxxxxxxx
> >> http://lists.xensource.com/xen-users
> >>
> >>
> >
> > _______________________________________________
> > Xen-users mailing list
> > Xen-users@xxxxxxxxxxxxxxxxxxx
> > http://lists.xensource.com/xen-users
> >
>
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
>
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
|
|