| |
|
 |
|
 |
|
|
|
| |
|
|
xen-users
Re: [Xen-users] Using bonding-device bond0 for Xen
On Torsdag 08 september 2005 18:52, Richard Mayer wrote:
> Thank you very much for the information!
> I managed to create a static bridge-device und disabled the
> "network"-script. Now I can reach the Xen0 - Domain from the XenU -
> Domain but not any further.
This might be an normal IP network problem. Do you have a default gateway
within the domU?
> This is what I did to my /etc/network/interfaces:
>
> auto bond0
> iface bond0 inet static
> address ipaddress
> gateway gatewayaddress
> network networkaddress
> netmask 255.255.255.0
> pre-up /sbin/ifconfig eth0 up
> pre-up /sbin/ifconfig eth1 up
> pre-up /sbin/ifconfig bond0 up
> pre-up /sbin/ifenslave bond0 eth0
> pre-up /sbin/ifenslave bond0 eth1
> pre-up /usr/sbin/brctl addbr br-bond0
pre-up /usr/sbin/brctl setfd br-bond0 0
might be a good idea to add as well.
> pre-up /usr/sbin/brctl addif br-bond0 bond0
>
> As I said, I can reach the Xen0-Domain now.
> Could you maybe send your configuration file?
You won't gain anything with it, it's much more complex.
> This bridge-stuff is pretty new to me... :)
It must be for new stuff for many - and difficult to understand as it's light
on documentation.
Regards
--
Andreas Bach Aaen System Developer, M. Sc.
Ericsson Danmark A/S tel: +45 89 38 51 00
Skanderborgvej 232 fax: +45 89 38 51 01
8260 Viby J Denmark andreas.bach.aaen@xxxxxxxxxxxx
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
| |
|
Home