Venkatesh,
The Mac
address you have in the config file is not a legal Mac address. It is
in the multicast range. The addresses used start with 'aa:00:00'.
If you
don’t set this value xend will generate a random Mac address.
It also appears
that the root setting below is incorrect, if you are exporting the sda1
partition.
> ip =
"10.1.10.20"
>
>
hostname="ttylinux"
>
> disk = ['file:/boot/ttylinux-xen,sda1, w']
>
> root =
"/dev/VolGroup00/LogVol00 ro" ç
Try using the "-n"
option to xm create to do a dry run and print the sxp which is easier to read.
Martha
Xensource
Customer Care
Xensource,
Inc.
From:
xen-users-bounces@xxxxxxxxxxxxxxxxxxx
[mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Venkatesh, C D
Sent: Thursday, September 01, 2005
11:05 AM
To: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: [Xen-users] DomU booting
problem.
I am new to Xen and not a
pro Linux guy. So, I am having bit of rough ride setting up Xen.
Xen (2.0.7) and
Dom0(2.6.11.12-Xen0) are booting alright. However, when I am not able to start
DomU (ttylinux - standard download – no changes made). It stops at IP
Config. Here is console log, the DomU config file, as well my main grub.conf.
Quick help is really appreciated. Thanx
root@localhost xen]# xm
create ttylinuxVM -c
Using config file
"ttylinuxVM".
Started domain ttylinux,
console on port 9601
************ REMOTE CONSOLE:
CTRL-] TO QUIT ********
Linux version 2.6.11.12-xenU
(xenod@xxxxxxxxxxxxxxxxxxxxx)
(gcc version 3.3.3
20040412 (Red Hat Linux
3.3.3-7)) #1 Thu Aug 4
00:48:08 BST 2005
BIOS-provided physical RAM
map:
Xen: 0000000000000000
- 0000000004000000 (usable)
64MB LOWMEM available.
DMI not present.
IRQ lockup detection
disabled
Allocating PCI resources
starting at 04000000 (gap:
04000000:fc000000)
Built 1 zonelists
Kernel command line:
ip=10.1.10.20:1.2.3.4:::ttylinux:eth0:off
root=/dev/VolGroup00/LogVol00
ro
Initializing CPU#0
PID hash table entries: 512
(order: 9, 8192 bytes)
Xen reported: 2994.530 MHz
processor.
Using tsc for high-res
timesource
Dentry cache hash table
entries: 16384 (order: 4,
65536 bytes)
Inode-cache hash table
entries: 8192 (order: 3, 32768
bytes)
vmalloc area:
c4800000-fbff9000, maxmem 34000000
Memory: 62384k/65536k
available (1631k kernel code,
3056k reserved, 411k data,
112k init, 0k highmem)
Checking if this processor
honours the WP bit even in
supervisor mode... Ok.
Mount-cache hash table
entries: 512 (order: 0, 4096
bytes)
CPU: Trace cache: 12K uops,
L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Intel Genuine Intel(R)
CPU 3.00GHz stepping 02
Enabling fast FPU save and
restore... done.
Enabling unmasked SIMD FPU
exception support... done.
Checking 'hlt'
instruction... disabled
NET: Registered protocol
family 16
xen_mem: Initialising
balloon driver.
Initializing Cryptographic
API
io scheduler noop registered
io scheduler anticipatory
registered
io scheduler deadline
registered
io scheduler cfq registered
RAMDISK driver initialized:
16 RAM disks of 4096K size
1024 blocksize
Xen virtual console
successfully installed as tty
Event-channel device
installed.
xen_blk: Initialising
virtual block device driver
xen_net: Initialising
virtual ethernet driver.
NET: Registered protocol
family 2
IP: routing cache hash table
of 512 buckets, 4Kbytes
TCP established hash table
entries: 4096 (order: 3,
32768 bytes)
TCP bind hash table entries:
4096 (order: 2, 16384
bytes)
TCP: Hash tables configured
(established 4096 bind
4096)
NET: Registered protocol
family 1
NET: Registered protocol
family 17
IP-Config: Guessing netmask
255.0.0.0
IP-Config: Complete:
device=eth0, addr=10.1.10.20, mask=255.0.0.0,
gw=255.255.255.255,
host=ttylinux, domain=, nis-domain=(none)
************ REMOTE CONSOLE
EXITED *****************
Domain configuration file -
ttylinuxVM1
----------------------------------------
kernel =
"/boot/vmlinuz-2.6-xenU"
memory = 64
name = "ttylinux"
nics = 1
vif = [
'mac=bb:00:00:00:00:11, bridge=xen-br0' ] ß-
ip = "10.1.10.20"
hostname="ttylinux"
disk = ['file:/boot/ttylinux-xen,sda1, w']
root =
"/dev/VolGroup00/LogVol00 ro"
My mail grub.conf
default=0
timeout=30
#hiddenmenu
title Fedora Core
(2.6.11-1.1369_FC4smp)
root (hd1,0)
kernel /vmlinuz-2.6.11-1.1369_FC4smp ro
root=/dev/VolGroup00/LogVol00
rh gb quiet
initrd /initrd-2.6.11-1.1369_FC4smp.img
title Fedora Core-up
(2.6.11-1.1369_FC4)
root (hd1,0)
kernel /vmlinuz-2.6.11-1.1369_FC4 ro root=/dev/VolGroup00/LogVol00 rhgb quiet
initrd /initrd-2.6.11-1.1369_FC4.img
title Xen-2.0 / XenLnux 2.6
root (hd1,0)
kernel /xen-2.0.7.gz dom0_mem=131072 com1=115200,8n1
module /vmlinuz-2.6.11.12-xen0 root=/dev/VolGroup00/LogVol00 ro console= tty0
module /initrd-2.6.11-1.1369_FC4.img
- CD
Home