Dan,
Are you pushing XenLinux update directly to Xen-unstable.hg without
updating Xen-ia64-unstable.hg? When will you update all these XenLinux
as well as other patches into Xen-ia64-unstable.hg for
xen-ia64-unstable.hg? Whole community also need to move to the new base.
-Fred
Alex Williamson wrote:
> Hi Christian,
>
> Here's a patch that updates ia64 to 2.6.16-rc2 on xen-unstable.
> This
> boots dom0 and domU on an rx2600. There were still several files that
> were accidentally reverted by the merge-ups (that weren't fixed by
> cset 8743). Those are included here with the 2.6.15 patch re-applied
> as well
> as changes between 2.6.15 and 2.6.16-rc2. Specifically, these are
> pal.h, processor.h and system.h. This patch also reverts changes to
> include/asm-ia64/hypercall.h and hypervisor.h from cset 8742. Thanks,
>
> Alex
>
> Signed-off-by: Alex Williamson <alex.williamson@xxxxxx>
> ---
>
> buildconfigs/linux-defconfig_xen0_ia64 | 101
> +++++++++++++-------- buildconfigs/linux-defconfig_xenU_ia64
> | 96 ++++++++++++------- linux-2.6-xen-sparse/arch/ia64/Makefile
> | 7 - linux-2.6-xen-sparse/arch/ia64/kernel/entry.S | 1
> linux-2.6-xen-sparse/arch/ia64/kernel/head.S | 2
> linux-2.6-xen-sparse/arch/ia64/kernel/setup.c | 26 ++++-
> linux-2.6-xen-sparse/include/asm-ia64/hypercall.h | 4
> linux-2.6-xen-sparse/include/asm-ia64/hypervisor.h | 4
> linux-2.6-xen-sparse/include/asm-ia64/pal.h | 23 ++++
> linux-2.6-xen-sparse/include/asm-ia64/processor.h | 9 -
> linux-2.6-xen-sparse/include/asm-ia64/system.h | 27 ++---
> 11 files changed, 192 insertions(+), 108 deletions(-)
>
>
> diff -r 57e6d7218427 buildconfigs/linux-defconfig_xen0_ia64
> --- a/buildconfigs/linux-defconfig_xen0_ia64 Fri Feb 3 18:45:14 2006
> +++ b/buildconfigs/linux-defconfig_xen0_ia64 Mon Feb 6 03:56:58 2006
> @@ -1,7 +1,7 @@
> #
> # Automatically generated make config: don't edit
> -# Linux kernel version: 2.6.15-xen0
> -# Wed Feb 1 13:18:15 2006
> +# Linux kernel version: 2.6.16-rc2-xen0
> +# Mon Feb 6 02:48:43 2006
> #
>
> #
> @@ -24,8 +24,6 @@
> # CONFIG_BSD_PROCESS_ACCT_V3 is not set
> CONFIG_SYSCTL=y
> # CONFIG_AUDIT is not set
> -CONFIG_HOTPLUG=y
> -CONFIG_KOBJECT_UEVENT=y
> CONFIG_IKCONFIG=y
> CONFIG_IKCONFIG_PROC=y
> # CONFIG_CPUSETS is not set
> @@ -35,8 +33,10 @@
> CONFIG_KALLSYMS=y
> CONFIG_KALLSYMS_ALL=y
> CONFIG_KALLSYMS_EXTRA_PASS=y
> +CONFIG_HOTPLUG=y
> CONFIG_PRINTK=y
> CONFIG_BUG=y
> +CONFIG_ELF_CORE=y
> CONFIG_BASE_FULL=y
> CONFIG_FUTEX=y
> CONFIG_EPOLL=y
> @@ -45,8 +45,10 @@
> CONFIG_CC_ALIGN_LABELS=0
> CONFIG_CC_ALIGN_LOOPS=0
> CONFIG_CC_ALIGN_JUMPS=0
> +CONFIG_SLAB=y
> # CONFIG_TINY_SHMEM is not set
> CONFIG_BASE_SMALL=0
> +# CONFIG_SLOB is not set
>
> #
> # Loadable module support
> @@ -170,6 +172,7 @@
> CONFIG_ACPI_THERMAL=y
> CONFIG_ACPI_BLACKLIST_YEAR=0
> # CONFIG_ACPI_DEBUG is not set
> +CONFIG_ACPI_EC=y
> CONFIG_ACPI_POWER=y
> CONFIG_ACPI_SYSTEM=y
> CONFIG_ACPI_CONTAINER=y
> @@ -247,16 +250,13 @@
> #
> # CONFIG_NETFILTER_NETLINK is not set
> # CONFIG_NF_CONNTRACK is not set
> +# CONFIG_NETFILTER_XTABLES is not set
>
> #
> # IP: Netfilter Configuration
> #
> # CONFIG_IP_NF_CONNTRACK is not set
> # CONFIG_IP_NF_QUEUE is not set
> -# CONFIG_IP_NF_IPTABLES is not set
> -CONFIG_IP_NF_ARPTABLES=y
> -# CONFIG_IP_NF_ARPFILTER is not set
> -# CONFIG_IP_NF_ARP_MANGLE is not set
>
> #
> # Bridge: Netfilter Configuration
> @@ -272,6 +272,11 @@
> # SCTP Configuration (EXPERIMENTAL)
> #
> # CONFIG_IP_SCTP is not set
> +
> +#
> +# TIPC Configuration (EXPERIMENTAL)
> +#
> +# CONFIG_TIPC is not set
> # CONFIG_ATM is not set
> CONFIG_BRIDGE=y
> # CONFIG_VLAN_8021Q is not set
> @@ -471,13 +476,7 @@
> CONFIG_SCSI_QLOGIC_FC=y
> # CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
> CONFIG_SCSI_QLOGIC_1280=y
> -CONFIG_SCSI_QLA2XXX=y
> -CONFIG_SCSI_QLA21XX=y
> -CONFIG_SCSI_QLA22XX=y
> -CONFIG_SCSI_QLA2300=y
> -CONFIG_SCSI_QLA2322=y
> -# CONFIG_SCSI_QLA6312 is not set
> -# CONFIG_SCSI_QLA24XX is not set
> +# CONFIG_SCSI_QLA_FC is not set
> # CONFIG_SCSI_LPFC is not set
> # CONFIG_SCSI_DC395x is not set
> # CONFIG_SCSI_DC390T is not set
> @@ -588,12 +587,14 @@
> # CONFIG_DL2K is not set
> CONFIG_E1000=y
> # CONFIG_E1000_NAPI is not set
> +# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
> # CONFIG_NS83820 is not set
> # CONFIG_HAMACHI is not set
> # CONFIG_YELLOWFIN is not set
> # CONFIG_R8169 is not set
> # CONFIG_SIS190 is not set
> # CONFIG_SKGE is not set
> +# CONFIG_SKY2 is not set
> # CONFIG_SK98LIN is not set
> # CONFIG_VIA_VELOCITY is not set
> CONFIG_TIGON3=y
> @@ -707,12 +708,15 @@
> CONFIG_VT_CONSOLE=y
> CONFIG_HW_CONSOLE=y
> CONFIG_SERIAL_NONSTANDARD=y
> +# CONFIG_COMPUTONE is not set
> # CONFIG_ROCKETPORT is not set
> # CONFIG_CYCLADES is not set
> # CONFIG_DIGIEPCA is not set
> +# CONFIG_MOXA_INTELLIO is not set
> # CONFIG_MOXA_SMARTIO is not set
> # CONFIG_ISI is not set
> # CONFIG_SYNCLINKMP is not set
> +# CONFIG_SYNCLINK_GT is not set
> # CONFIG_N_HDLC is not set
> # CONFIG_SPECIALIX is not set
> # CONFIG_SX is not set
> @@ -725,6 +729,7 @@
> CONFIG_SERIAL_8250_CONSOLE=y
> CONFIG_SERIAL_8250_ACPI=y
> CONFIG_SERIAL_8250_NR_UARTS=6
> +CONFIG_SERIAL_8250_RUNTIME_UARTS=4
> CONFIG_SERIAL_8250_EXTENDED=y
> CONFIG_SERIAL_8250_SHARE_IRQ=y
> # CONFIG_SERIAL_8250_DETECT_IRQ is not set
> @@ -735,7 +740,6 @@
> #
> CONFIG_SERIAL_CORE=y
> CONFIG_SERIAL_CORE_CONSOLE=y
> -# CONFIG_SERIAL_JSM is not set
> CONFIG_UNIX98_PTYS=y
> CONFIG_LEGACY_PTYS=y
> CONFIG_LEGACY_PTY_COUNT=256
> @@ -832,6 +836,12 @@
> # CONFIG_I2C_DEBUG_ALGO is not set
> # CONFIG_I2C_DEBUG_BUS is not set
> # CONFIG_I2C_DEBUG_CHIP is not set
> +
> +#
> +# SPI support
> +#
> +# CONFIG_SPI is not set
> +# CONFIG_SPI_MASTER is not set
>
> #
> # Dallas's 1-wire bus
> @@ -872,6 +882,7 @@
> # CONFIG_SENSORS_SMSC47M1 is not set
> # CONFIG_SENSORS_SMSC47B397 is not set
> # CONFIG_SENSORS_VIA686A is not set
> +# CONFIG_SENSORS_VT8231 is not set
> # CONFIG_SENSORS_W83781D is not set
> # CONFIG_SENSORS_W83792D is not set
> # CONFIG_SENSORS_W83L785TS is not set
> @@ -899,6 +910,7 @@
> #
> # Video Adapters
> #
> +# CONFIG_VIDEO_ADV_DEBUG is not set
> # CONFIG_VIDEO_BT848 is not set
> # CONFIG_VIDEO_CPIA is not set
> # CONFIG_VIDEO_SAA5246A is not set
> @@ -960,7 +972,6 @@
> # CONFIG_FB_KYRO is not set
> # CONFIG_FB_3DFX is not set
> # CONFIG_FB_VOODOO1 is not set
> -# CONFIG_FB_CYBLA is not set
> # CONFIG_FB_TRIDENT is not set
> # CONFIG_FB_VIRTUAL is not set
>
> @@ -989,8 +1000,6 @@
> # Advanced Linux Sound Architecture
> #
> CONFIG_SND=y
> -CONFIG_SND_AC97_CODEC=y
> -CONFIG_SND_AC97_BUS=y
> CONFIG_SND_TIMER=y
> CONFIG_SND_PCM=y
> CONFIG_SND_HWDEP=y
> @@ -1001,15 +1010,18 @@
> CONFIG_SND_MIXER_OSS=y
> CONFIG_SND_PCM_OSS=y
> CONFIG_SND_SEQUENCER_OSS=y
> +# CONFIG_SND_DYNAMIC_MINORS is not set
> +CONFIG_SND_SUPPORT_OLD_API=y
> # CONFIG_SND_VERBOSE_PRINTK is not set
> # CONFIG_SND_DEBUG is not set
> -CONFIG_SND_GENERIC_DRIVER=y
>
> #
> # Generic devices
> #
> CONFIG_SND_MPU401_UART=y
> CONFIG_SND_OPL3_LIB=y
> +CONFIG_SND_AC97_CODEC=y
> +CONFIG_SND_AC97_BUS=y
> CONFIG_SND_DUMMY=y
> CONFIG_SND_VIRMIDI=y
> CONFIG_SND_MTPAV=y
> @@ -1019,6 +1031,7 @@
> #
> # PCI devices
> #
> +# CONFIG_SND_AD1889 is not set
> # CONFIG_SND_ALI5451 is not set
> CONFIG_SND_ATIIXP=y
> # CONFIG_SND_ATIIXP_MODEM is not set
> @@ -1027,39 +1040,39 @@
> # CONFIG_SND_AU8830 is not set
> # CONFIG_SND_AZT3328 is not set
> # CONFIG_SND_BT87X is not set
> +# CONFIG_SND_CA0106 is not set
> +# CONFIG_SND_CMIPCI is not set
> +# CONFIG_SND_CS4281 is not set
> # CONFIG_SND_CS46XX is not set
> -# CONFIG_SND_CS4281 is not set
> # CONFIG_SND_EMU10K1 is not set
> # CONFIG_SND_EMU10K1X is not set
> -# CONFIG_SND_CA0106 is not set
> -# CONFIG_SND_KORG1212 is not set
> -# CONFIG_SND_MIXART is not set
> -# CONFIG_SND_NM256 is not set
> -# CONFIG_SND_RME32 is not set
> -# CONFIG_SND_RME96 is not set
> -# CONFIG_SND_RME9652 is not set
> -# CONFIG_SND_HDSP is not set
> -# CONFIG_SND_HDSPM is not set
> -# CONFIG_SND_TRIDENT is not set
> -# CONFIG_SND_YMFPCI is not set
> -# CONFIG_SND_AD1889 is not set
> -# CONFIG_SND_CMIPCI is not set
> # CONFIG_SND_ENS1370 is not set
> # CONFIG_SND_ENS1371 is not set
> # CONFIG_SND_ES1938 is not set
> # CONFIG_SND_ES1968 is not set
> -# CONFIG_SND_MAESTRO3 is not set
> CONFIG_SND_FM801=y
> CONFIG_SND_FM801_TEA575X=y
> +# CONFIG_SND_HDA_INTEL is not set
> +# CONFIG_SND_HDSP is not set
> +# CONFIG_SND_HDSPM is not set
> # CONFIG_SND_ICE1712 is not set
> # CONFIG_SND_ICE1724 is not set
> # CONFIG_SND_INTEL8X0 is not set
> # CONFIG_SND_INTEL8X0M is not set
> +# CONFIG_SND_KORG1212 is not set
> +# CONFIG_SND_MAESTRO3 is not set
> +# CONFIG_SND_MIXART is not set
> +# CONFIG_SND_NM256 is not set
> +# CONFIG_SND_PCXHR is not set
> +# CONFIG_SND_RME32 is not set
> +# CONFIG_SND_RME96 is not set
> +# CONFIG_SND_RME9652 is not set
> # CONFIG_SND_SONICVIBES is not set
> +# CONFIG_SND_TRIDENT is not set
> # CONFIG_SND_VIA82XX is not set
> # CONFIG_SND_VIA82XX_MODEM is not set
> # CONFIG_SND_VX222 is not set
> -# CONFIG_SND_HDA_INTEL is not set
> +# CONFIG_SND_YMFPCI is not set
>
> #
> # USB devices
> @@ -1132,12 +1145,15 @@
> # CONFIG_USB_STORAGE_SDDR09 is not set
> # CONFIG_USB_STORAGE_SDDR55 is not set
> # CONFIG_USB_STORAGE_JUMPSHOT is not set
> +# CONFIG_USB_STORAGE_ALAUDA is not set
> +# CONFIG_USB_LIBUSUAL is not set
>
> #
> # USB Input Devices
> #
> CONFIG_USB_HID=y
> CONFIG_USB_HIDINPUT=y
> +# CONFIG_USB_HIDINPUT_POWERBOOK is not set
> # CONFIG_HID_FF is not set
> CONFIG_USB_HIDDEV=y
> # CONFIG_USB_AIPTEK is not set
> @@ -1151,6 +1167,7 @@
> # CONFIG_USB_YEALINK is not set
> # CONFIG_USB_XPAD is not set
> # CONFIG_USB_ATI_REMOTE is not set
> +# CONFIG_USB_ATI_REMOTE2 is not set
> # CONFIG_USB_KEYSPAN_REMOTE is not set
> # CONFIG_USB_APPLETOUCH is not set
>
> @@ -1166,6 +1183,7 @@
> # CONFIG_USB_DABUSB is not set
> # CONFIG_USB_VICAM is not set
> # CONFIG_USB_DSBR is not set
> +# CONFIG_USB_ET61X251 is not set
> # CONFIG_USB_IBMCAM is not set
> # CONFIG_USB_KONICAWC is not set
> # CONFIG_USB_OV511 is not set
> @@ -1232,6 +1250,10 @@
>
> #
> # SN Devices
> +#
> +
> +#
> +# EDAC - error detection and reporting (RAS)
> #
>
> #
> @@ -1263,6 +1285,7 @@
> # CONFIG_XFS_SECURITY is not set
> # CONFIG_XFS_POSIX_ACL is not set
> # CONFIG_XFS_RT is not set
> +# CONFIG_OCFS2_FS is not set
> # CONFIG_MINIX_FS is not set
> # CONFIG_ROMFS_FS is not set
> CONFIG_INOTIFY=y
> @@ -1301,6 +1324,7 @@
> # CONFIG_HUGETLB_PAGE is not set
> CONFIG_RAMFS=y
> # CONFIG_RELAYFS_FS is not set
> +# CONFIG_CONFIGFS_FS is not set
>
> #
> # Miscellaneous filesystems
> @@ -1370,6 +1394,7 @@
> CONFIG_SGI_PARTITION=y
> # CONFIG_ULTRIX_PARTITION is not set
> # CONFIG_SUN_PARTITION is not set
> +# CONFIG_KARMA_PARTITION is not set
> CONFIG_EFI_PARTITION=y
>
> #
> @@ -1437,18 +1462,20 @@
> # Kernel hacking
> #
> # CONFIG_PRINTK_TIME is not set
> +CONFIG_MAGIC_SYSRQ=y
> CONFIG_DEBUG_KERNEL=y
> -CONFIG_MAGIC_SYSRQ=y
> CONFIG_LOG_BUF_SHIFT=20
> CONFIG_DETECT_SOFTLOCKUP=y
> # CONFIG_SCHEDSTATS is not set
> # CONFIG_DEBUG_SLAB is not set
> +CONFIG_DEBUG_MUTEXES=y
> # CONFIG_DEBUG_SPINLOCK is not set
> # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
> # CONFIG_DEBUG_KOBJECT is not set
> # CONFIG_DEBUG_INFO is not set
> # CONFIG_DEBUG_FS is not set
> # CONFIG_DEBUG_VM is not set
> +CONFIG_FORCED_INLINING=y
> # CONFIG_RCU_TORTURE_TEST is not set
> CONFIG_IA64_GRANULE_16MB=y
> # CONFIG_IA64_GRANULE_64MB is not set
> diff -r 57e6d7218427 buildconfigs/linux-defconfig_xenU_ia64
> --- a/buildconfigs/linux-defconfig_xenU_ia64 Fri Feb 3 18:45:14 2006
> +++ b/buildconfigs/linux-defconfig_xenU_ia64 Mon Feb 6 03:56:58 2006
> @@ -1,7 +1,7 @@
> #
> # Automatically generated make config: don't edit
> -# Linux kernel version: 2.6.15-xenU
> -# Wed Feb 1 14:19:46 2006
> +# Linux kernel version: 2.6.16-rc2-xenU
> +# Mon Feb 6 03:35:30 2006
> #
>
> #
> @@ -26,8 +26,6 @@
> # CONFIG_BSD_PROCESS_ACCT_V3 is not set
> CONFIG_SYSCTL=y
> # CONFIG_AUDIT is not set
> -CONFIG_HOTPLUG=y
> -CONFIG_KOBJECT_UEVENT=y
> # CONFIG_IKCONFIG is not set
> # CONFIG_CPUSETS is not set
> CONFIG_INITRAMFS_SOURCE=""
> @@ -36,8 +34,10 @@
> CONFIG_KALLSYMS=y
> # CONFIG_KALLSYMS_ALL is not set
> # CONFIG_KALLSYMS_EXTRA_PASS is not set
> +CONFIG_HOTPLUG=y
> CONFIG_PRINTK=y
> CONFIG_BUG=y
> +CONFIG_ELF_CORE=y
> CONFIG_BASE_FULL=y
> CONFIG_FUTEX=y
> CONFIG_EPOLL=y
> @@ -46,8 +46,10 @@
> CONFIG_CC_ALIGN_LABELS=0
> CONFIG_CC_ALIGN_LOOPS=0
> CONFIG_CC_ALIGN_JUMPS=0
> +CONFIG_SLAB=y
> # CONFIG_TINY_SHMEM is not set
> CONFIG_BASE_SMALL=0
> +# CONFIG_SLOB is not set
>
> #
> # Loadable module support
> @@ -169,6 +171,7 @@
> CONFIG_ACPI_THERMAL=y
> CONFIG_ACPI_BLACKLIST_YEAR=0
> # CONFIG_ACPI_DEBUG is not set
> +CONFIG_ACPI_EC=y
> CONFIG_ACPI_POWER=y
> CONFIG_ACPI_SYSTEM=y
> # CONFIG_ACPI_CONTAINER is not set
> @@ -245,16 +248,13 @@
> #
> # CONFIG_NETFILTER_NETLINK is not set
> # CONFIG_NF_CONNTRACK is not set
> +# CONFIG_NETFILTER_XTABLES is not set
>
> #
> # IP: Netfilter Configuration
> #
> # CONFIG_IP_NF_CONNTRACK is not set
> # CONFIG_IP_NF_QUEUE is not set
> -# CONFIG_IP_NF_IPTABLES is not set
> -CONFIG_IP_NF_ARPTABLES=y
> -# CONFIG_IP_NF_ARPFILTER is not set
> -# CONFIG_IP_NF_ARP_MANGLE is not set
>
> #
> # DCCP Configuration (EXPERIMENTAL)
> @@ -265,6 +265,11 @@
> # SCTP Configuration (EXPERIMENTAL)
> #
> # CONFIG_IP_SCTP is not set
> +
> +#
> +# TIPC Configuration (EXPERIMENTAL)
> +#
> +# CONFIG_TIPC is not set
> # CONFIG_ATM is not set
> # CONFIG_BRIDGE is not set
> # CONFIG_VLAN_8021Q is not set
> @@ -412,13 +417,7 @@
> # CONFIG_SCSI_IPR is not set
> # CONFIG_SCSI_QLOGIC_FC is not set
> CONFIG_SCSI_QLOGIC_1280=y
> -CONFIG_SCSI_QLA2XXX=y
> -# CONFIG_SCSI_QLA21XX is not set
> -# CONFIG_SCSI_QLA22XX is not set
> -# CONFIG_SCSI_QLA2300 is not set
> -# CONFIG_SCSI_QLA2322 is not set
> -# CONFIG_SCSI_QLA6312 is not set
> -# CONFIG_SCSI_QLA24XX is not set
> +# CONFIG_SCSI_QLA_FC is not set
> # CONFIG_SCSI_LPFC is not set
> # CONFIG_SCSI_DC395x is not set
> # CONFIG_SCSI_DC390T is not set
> @@ -519,12 +518,14 @@
> # CONFIG_DL2K is not set
> CONFIG_E1000=y
> # CONFIG_E1000_NAPI is not set
> +# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
> # CONFIG_NS83820 is not set
> # CONFIG_HAMACHI is not set
> # CONFIG_YELLOWFIN is not set
> # CONFIG_R8169 is not set
> # CONFIG_SIS190 is not set
> # CONFIG_SKGE is not set
> +# CONFIG_SKY2 is not set
> # CONFIG_SK98LIN is not set
> # CONFIG_VIA_VELOCITY is not set
> CONFIG_TIGON3=y
> @@ -619,6 +620,7 @@
> CONFIG_SERIAL_8250_CONSOLE=y
> CONFIG_SERIAL_8250_ACPI=y
> CONFIG_SERIAL_8250_NR_UARTS=8
> +CONFIG_SERIAL_8250_RUNTIME_UARTS=4
> CONFIG_SERIAL_8250_EXTENDED=y
> CONFIG_SERIAL_8250_SHARE_IRQ=y
> # CONFIG_SERIAL_8250_DETECT_IRQ is not set
> @@ -726,6 +728,12 @@
> # CONFIG_I2C_DEBUG_ALGO is not set
> # CONFIG_I2C_DEBUG_BUS is not set
> # CONFIG_I2C_DEBUG_CHIP is not set
> +
> +#
> +# SPI support
> +#
> +# CONFIG_SPI is not set
> +# CONFIG_SPI_MASTER is not set
>
> #
> # Dallas's 1-wire bus
> @@ -766,6 +774,7 @@
> # CONFIG_SENSORS_SMSC47M1 is not set
> # CONFIG_SENSORS_SMSC47B397 is not set
> # CONFIG_SENSORS_VIA686A is not set
> +# CONFIG_SENSORS_VT8231 is not set
> # CONFIG_SENSORS_W83781D is not set
> # CONFIG_SENSORS_W83792D is not set
> # CONFIG_SENSORS_W83L785TS is not set
> @@ -793,6 +802,7 @@
> #
> # Video Adapters
> #
> +# CONFIG_VIDEO_ADV_DEBUG is not set
> # CONFIG_VIDEO_BT848 is not set
> # CONFIG_VIDEO_CPIA is not set
> # CONFIG_VIDEO_SAA5246A is not set
> @@ -855,7 +865,6 @@
> # CONFIG_FB_KYRO is not set
> # CONFIG_FB_3DFX is not set
> # CONFIG_FB_VOODOO1 is not set
> -# CONFIG_FB_CYBLA is not set
> # CONFIG_FB_TRIDENT is not set
> # CONFIG_FB_PM3 is not set
> # CONFIG_FB_VIRTUAL is not set
> @@ -878,8 +887,6 @@
> # Advanced Linux Sound Architecture
> #
> CONFIG_SND=y
> -CONFIG_SND_AC97_CODEC=y
> -CONFIG_SND_AC97_BUS=y
> CONFIG_SND_TIMER=y
> CONFIG_SND_PCM=y
> CONFIG_SND_HWDEP=y
> @@ -890,6 +897,8 @@
> CONFIG_SND_MIXER_OSS=y
> CONFIG_SND_PCM_OSS=y
> CONFIG_SND_SEQUENCER_OSS=y
> +# CONFIG_SND_DYNAMIC_MINORS is not set
> +CONFIG_SND_SUPPORT_OLD_API=y
> # CONFIG_SND_VERBOSE_PRINTK is not set
> # CONFIG_SND_DEBUG is not set
>
> @@ -898,6 +907,8 @@
> #
> CONFIG_SND_MPU401_UART=y
> CONFIG_SND_OPL3_LIB=y
> +CONFIG_SND_AC97_CODEC=y
> +CONFIG_SND_AC97_BUS=y
> # CONFIG_SND_DUMMY is not set
> # CONFIG_SND_VIRMIDI is not set
> # CONFIG_SND_MTPAV is not set
> @@ -907,6 +918,7 @@
> #
> # PCI devices
> #
> +# CONFIG_SND_AD1889 is not set
> # CONFIG_SND_ALI5451 is not set
> # CONFIG_SND_ATIIXP is not set
> # CONFIG_SND_ATIIXP_MODEM is not set
> @@ -915,39 +927,39 @@
> # CONFIG_SND_AU8830 is not set
> # CONFIG_SND_AZT3328 is not set
> # CONFIG_SND_BT87X is not set
> +# CONFIG_SND_CA0106 is not set
> +# CONFIG_SND_CMIPCI is not set
> +# CONFIG_SND_CS4281 is not set
> # CONFIG_SND_CS46XX is not set
> -# CONFIG_SND_CS4281 is not set
> # CONFIG_SND_EMU10K1 is not set
> # CONFIG_SND_EMU10K1X is not set
> -# CONFIG_SND_CA0106 is not set
> -# CONFIG_SND_KORG1212 is not set
> -# CONFIG_SND_MIXART is not set
> -# CONFIG_SND_NM256 is not set
> -# CONFIG_SND_RME32 is not set
> -# CONFIG_SND_RME96 is not set
> -# CONFIG_SND_RME9652 is not set
> -# CONFIG_SND_HDSP is not set
> -# CONFIG_SND_HDSPM is not set
> -# CONFIG_SND_TRIDENT is not set
> -# CONFIG_SND_YMFPCI is not set
> -# CONFIG_SND_AD1889 is not set
> -# CONFIG_SND_CMIPCI is not set
> # CONFIG_SND_ENS1370 is not set
> # CONFIG_SND_ENS1371 is not set
> # CONFIG_SND_ES1938 is not set
> # CONFIG_SND_ES1968 is not set
> -# CONFIG_SND_MAESTRO3 is not set
> CONFIG_SND_FM801=y
> CONFIG_SND_FM801_TEA575X=y
> +# CONFIG_SND_HDA_INTEL is not set
> +# CONFIG_SND_HDSP is not set
> +# CONFIG_SND_HDSPM is not set
> # CONFIG_SND_ICE1712 is not set
> # CONFIG_SND_ICE1724 is not set
> # CONFIG_SND_INTEL8X0 is not set
> # CONFIG_SND_INTEL8X0M is not set
> +# CONFIG_SND_KORG1212 is not set
> +# CONFIG_SND_MAESTRO3 is not set
> +# CONFIG_SND_MIXART is not set
> +# CONFIG_SND_NM256 is not set
> +# CONFIG_SND_PCXHR is not set
> +# CONFIG_SND_RME32 is not set
> +# CONFIG_SND_RME96 is not set
> +# CONFIG_SND_RME9652 is not set
> # CONFIG_SND_SONICVIBES is not set
> +# CONFIG_SND_TRIDENT is not set
> # CONFIG_SND_VIA82XX is not set
> # CONFIG_SND_VIA82XX_MODEM is not set
> # CONFIG_SND_VX222 is not set
> -# CONFIG_SND_HDA_INTEL is not set
> +# CONFIG_SND_YMFPCI is not set
>
> #
> # USB devices
> @@ -1012,12 +1024,15 @@
> # CONFIG_USB_STORAGE_SDDR09 is not set
> # CONFIG_USB_STORAGE_SDDR55 is not set
> # CONFIG_USB_STORAGE_JUMPSHOT is not set
> +# CONFIG_USB_STORAGE_ALAUDA is not set
> +# CONFIG_USB_LIBUSUAL is not set
>
> #
> # USB Input Devices
> #
> CONFIG_USB_HID=y
> CONFIG_USB_HIDINPUT=y
> +# CONFIG_USB_HIDINPUT_POWERBOOK is not set
> # CONFIG_HID_FF is not set
> CONFIG_USB_HIDDEV=y
> # CONFIG_USB_AIPTEK is not set
> @@ -1031,6 +1046,7 @@
> # CONFIG_USB_YEALINK is not set
> # CONFIG_USB_XPAD is not set
> # CONFIG_USB_ATI_REMOTE is not set
> +# CONFIG_USB_ATI_REMOTE2 is not set
> # CONFIG_USB_KEYSPAN_REMOTE is not set
> # CONFIG_USB_APPLETOUCH is not set
>
> @@ -1046,6 +1062,7 @@
> # CONFIG_USB_DABUSB is not set
> # CONFIG_USB_VICAM is not set
> # CONFIG_USB_DSBR is not set
> +# CONFIG_USB_ET61X251 is not set
> # CONFIG_USB_IBMCAM is not set
> # CONFIG_USB_KONICAWC is not set
> # CONFIG_USB_OV511 is not set
> @@ -1111,6 +1128,10 @@
>
> #
> # SN Devices
> +#
> +
> +#
> +# EDAC - error detection and reporting (RAS)
> #
>
> #
> @@ -1132,6 +1153,7 @@
> # CONFIG_JFS_FS is not set
> # CONFIG_FS_POSIX_ACL is not set
> # CONFIG_XFS_FS is not set
> +# CONFIG_OCFS2_FS is not set
> # CONFIG_MINIX_FS is not set
> # CONFIG_ROMFS_FS is not set
> CONFIG_INOTIFY=y
> @@ -1170,6 +1192,7 @@
> # CONFIG_HUGETLB_PAGE is not set
> CONFIG_RAMFS=y
> # CONFIG_RELAYFS_FS is not set
> +# CONFIG_CONFIGFS_FS is not set
>
> #
> # Miscellaneous filesystems
> @@ -1234,6 +1257,7 @@
> # CONFIG_SGI_PARTITION is not set
> # CONFIG_ULTRIX_PARTITION is not set
> # CONFIG_SUN_PARTITION is not set
> +# CONFIG_KARMA_PARTITION is not set
> CONFIG_EFI_PARTITION=y
>
> #
> @@ -1301,18 +1325,20 @@
> # Kernel hacking
> #
> # CONFIG_PRINTK_TIME is not set
> +CONFIG_MAGIC_SYSRQ=y
> CONFIG_DEBUG_KERNEL=y
> -CONFIG_MAGIC_SYSRQ=y
> CONFIG_LOG_BUF_SHIFT=17
> CONFIG_DETECT_SOFTLOCKUP=y
> # CONFIG_SCHEDSTATS is not set
> # CONFIG_DEBUG_SLAB is not set
> +CONFIG_DEBUG_MUTEXES=y
> # CONFIG_DEBUG_SPINLOCK is not set
> # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
> # CONFIG_DEBUG_KOBJECT is not set
> # CONFIG_DEBUG_INFO is not set
> # CONFIG_DEBUG_FS is not set
> # CONFIG_DEBUG_VM is not set
> +CONFIG_FORCED_INLINING=y
> # CONFIG_RCU_TORTURE_TEST is not set
> CONFIG_IA64_GRANULE_16MB=y
> # CONFIG_IA64_GRANULE_64MB is not set
> diff -r 57e6d7218427 linux-2.6-xen-sparse/arch/ia64/Makefile
> --- a/linux-2.6-xen-sparse/arch/ia64/Makefile Fri Feb 3 18:45:14 2006
> +++ b/linux-2.6-xen-sparse/arch/ia64/Makefile Mon Feb 6 03:56:58 2006
> @@ -25,7 +25,6 @@
> -falign-functions=32 -frename-registers
> -fno-optimize-sibling-calls CFLAGS_KERNEL := -mconstant-gp
>
> -GCC_VERSION := $(call cc-version)
> GAS_STATUS = $(shell $(srctree)/arch/ia64/scripts/check-gas "$(CC)"
> "$(OBJDUMP)") CPPFLAGS += $(shell
> $(srctree)/arch/ia64/scripts/toolchain-flags "$(CC)" "$(OBJDUMP)"
> "$(READELF)")
>
> @@ -37,11 +36,7 @@
> ftp://ftp.hpl.hp.com/pub/linux-ia64/gas-030124.tar.gz)
> endif
>
> -ifneq ($(shell if [ $(GCC_VERSION) -lt 0300 ] ; then echo "bad"; fi
> ;),)
> -$(error Sorry, your compiler is too old. GCC v2.96 is known to
> generate bad code.)
> -endif
> -
> -ifeq ($(GCC_VERSION),0304)
> +ifeq ($(call cc-version),0304)
> cflags-$(CONFIG_ITANIUM) += -mtune=merced
> cflags-$(CONFIG_MCKINLEY) += -mtune=mckinley
> endif
> diff -r 57e6d7218427 linux-2.6-xen-sparse/arch/ia64/kernel/entry.S
> --- a/linux-2.6-xen-sparse/arch/ia64/kernel/entry.S Fri Feb 3
> 18:45:14 2006 +++ b/linux-2.6-xen-sparse/arch/ia64/kernel/entry.S
Mon
> Feb 6 03:56:58 2006 @@ -1606,5 +1606,6 @@
> data8 sys_inotify_init
> data8 sys_inotify_add_watch
> data8 sys_inotify_rm_watch
> + data8 sys_migrate_pages // 1280
>
> .org sys_call_table + 8*NR_syscalls // guard against
failures to
> increase NR_syscalls
> diff -r 57e6d7218427 linux-2.6-xen-sparse/arch/ia64/kernel/head.S
> --- a/linux-2.6-xen-sparse/arch/ia64/kernel/head.S Fri Feb 3
> 18:45:14 2006 +++ b/linux-2.6-xen-sparse/arch/ia64/kernel/head.S
Mon
> Feb 6 03:56:58 2006 @@ -1064,7 +1064,7 @@
> * the clobber lists for spin_lock() in
include/asm-ia64/spinlock.h.
> */
>
> -#if __GNUC__ < 3 || (__GNUC__ == 3 && __GNUC_MINOR__ < 3)
> +#if (__GNUC__ == 3 && __GNUC_MINOR__ < 3)
>
> GLOBAL_ENTRY(ia64_spinlock_contention_pre3_4)
> .prologue
> diff -r 57e6d7218427 linux-2.6-xen-sparse/arch/ia64/kernel/setup.c
> --- a/linux-2.6-xen-sparse/arch/ia64/kernel/setup.c Fri Feb 3
> 18:45:14 2006 +++ b/linux-2.6-xen-sparse/arch/ia64/kernel/setup.c
Mon
> Feb 6 03:56:58 2006 @@ -43,6 +43,7 @@
> #include <linux/initrd.h>
> #include <linux/platform.h>
> #include <linux/pm.h>
> +#include <linux/cpufreq.h>
>
> #include <asm/ia32.h>
> #include <asm/machvec.h>
> @@ -59,6 +60,7 @@
> #include <asm/smp.h>
> #include <asm/system.h>
> #include <asm/unistd.h>
> +#include <asm/system.h>
>
> #if defined(CONFIG_SMP) && (IA64_CPU_SIZE > PAGE_SIZE)
> # error "struct cpuinfo_ia64 too big!"
> @@ -521,6 +523,7 @@
> char family[32], features[128], *cp, sep;
> struct cpuinfo_ia64 *c = v;
> unsigned long mask;
> + unsigned long proc_freq;
> int i;
>
> mask = c->features;
> @@ -552,6 +555,10 @@
> *cp++ = sep;
> sprintf(cp, " 0x%lx", mask);
> }
> +
> + proc_freq = cpufreq_quick_get(cpunum);
> + if (!proc_freq)
> + proc_freq = c->proc_freq / 1000;
>
> seq_printf(m,
> "processor : %d\n"
> @@ -569,7 +576,7 @@
> "BogoMIPS : %lu.%02lu\n",
> cpunum, c->vendor, family, c->model, c->revision,
c->archrev,
> features, c->ppn, c->number,
> - c->proc_freq / 1000000, c->proc_freq % 1000000,
> + proc_freq / 1000, proc_freq % 1000,
> c->itc_freq / 1000000, c->itc_freq % 1000000,
> lpj*HZ/500000, (lpj*HZ/5000) % 100);
> #ifdef CONFIG_SMP
> @@ -693,6 +700,7 @@
> get_max_cacheline_size (void)
> {
> unsigned long line_size, max = 1;
> + unsigned int cache_size = 0;
> u64 l, levels, unique_caches;
> pal_cache_config_info_t cci;
> s64 status;
> @@ -722,6 +730,8 @@
> line_size = 1 << cci.pcci_line_size;
> if (line_size > max)
> max = line_size;
> + if (cache_size < cci.pcci_cache_size)
> + cache_size = cci.pcci_cache_size;
> if (!cci.pcci_unified) {
> status = ia64_pal_cache_config_info(l,
> /* cache_type
(instruction)= */ 1,
> @@ -738,6 +748,9 @@
> ia64_i_cache_stride_shift = cci.pcci_stride;
> }
> out:
> +#ifdef CONFIG_SMP
> + max_cache_size = max(max_cache_size, cache_size);
> +#endif
> if (max > ia64_max_cacheline_size)
> ia64_max_cacheline_size = max;
> }
> @@ -792,7 +805,7 @@
> #endif
>
> /* Clear the stack memory reserved for pt_regs: */
> - memset(ia64_task_regs(current), 0, sizeof(struct pt_regs));
> + memset(task_pt_regs(current), 0, sizeof(struct pt_regs));
>
> ia64_set_kr(IA64_KR_FPU_OWNER, 0);
>
> @@ -868,6 +881,15 @@
> pm_idle = default_idle;
> }
>
> +/*
> + * On SMP systems, when the scheduler does migration-cost
> autodetection, + * it needs a way to flush as much of the CPU's
> caches as possible. + */
> +void sched_cacheflush(void)
> +{
> + ia64_sal_cache_flush(3);
> +}
> +
> void
> check_bugs (void)
> {
> diff -r 57e6d7218427 linux-2.6-xen-sparse/include/asm-ia64/hypercall.h
> --- a/linux-2.6-xen-sparse/include/asm-ia64/hypercall.h Fri Feb
3
> 18:45:14 2006 +++
> b/linux-2.6-xen-sparse/include/asm-ia64/hypercall.h Mon Feb 6
> 03:56:58 2006 @@ -30,8 +30,8 @@ #ifndef __HYPERCALL_H__
> #define __HYPERCALL_H__
>
> -#include <asm-xen/xen-public/xen.h>
> -#include <asm-xen/xen-public/sched.h>
> +#include <xen/interface/xen.h>
> +#include <xen/interface/sched.h>
>
> /* FIXME: temp place to hold these page related macros */
> #include <asm/page.h>
> diff -r 57e6d7218427
> linux-2.6-xen-sparse/include/asm-ia64/hypervisor.h ---
> a/linux-2.6-xen-sparse/include/asm-ia64/hypervisor.h Fri Feb 3
> 18:45:14 2006 +++
> b/linux-2.6-xen-sparse/include/asm-ia64/hypervisor.h Mon Feb 6
> 03:56:58 2006 @@ -34,8 +34,8 @@ #include <linux/types.h> #include
> <linux/kernel.h> #include <linux/version.h>
> -#include <asm-xen/xen-public/xen.h>
> -#include <asm-xen/xen-public/dom0_ops.h>
> +#include <xen/interface/xen.h>
> +#include <xen/interface/dom0_ops.h>
> #include <asm/ptrace.h>
> #include <asm/page.h>
>
> diff -r 57e6d7218427 linux-2.6-xen-sparse/include/asm-ia64/pal.h
> --- a/linux-2.6-xen-sparse/include/asm-ia64/pal.h Fri Feb 3
18:45:14
> 2006 +++ b/linux-2.6-xen-sparse/include/asm-ia64/pal.h Mon Feb
6
> 03:56:58 2006 @@ -75,6 +75,8 @@
> #define PAL_CACHE_READ 259 /* read tag & data of
cacheline for
> diagnostic testing */ #define PAL_CACHE_WRITE 260
/* write tag &
> data of cacheline for diagnostic testing */ #define
> PAL_VM_TR_READ 261 /* read contents of translation
register */
> +#define PAL_GET_PSTATE 262 /* get the current
P-state */ +#define
> PAL_SET_PSTATE 263 /* set the P-state */
>
> #ifndef __ASSEMBLY__
>
> @@ -926,7 +928,7 @@
> ia64_pal_cache_flush (u64 cache_type, u64 invalidate, u64 *progress,
> u64 *vector) {
> struct ia64_pal_retval iprv;
> - PAL_CALL_IC_OFF(iprv, PAL_CACHE_FLUSH, cache_type, invalidate,
> *progress); + PAL_CALL(iprv, PAL_CACHE_FLUSH, cache_type, invalidate,
> *progress); if (vector)
> *vector = iprv.v0;
> *progress = iprv.v1;
> @@ -1109,6 +1111,25 @@
> {
> struct ia64_pal_retval iprv;
> PAL_CALL_STK(iprv, PAL_HALT_INFO, (unsigned long) power_buf, 0,
0);
> + return iprv.status;
> +}
> +
> +/* Get the current P-state information */
> +static inline s64
> +ia64_pal_get_pstate (u64 *pstate_index)
> +{
> + struct ia64_pal_retval iprv;
> + PAL_CALL_STK(iprv, PAL_GET_PSTATE, 0, 0, 0);
> + *pstate_index = iprv.v0;
> + return iprv.status;
> +}
> +
> +/* Set the P-state */
> +static inline s64
> +ia64_pal_set_pstate (u64 pstate_index)
> +{
> + struct ia64_pal_retval iprv;
> + PAL_CALL_STK(iprv, PAL_SET_PSTATE, pstate_index, 0, 0);
> return iprv.status;
> }
>
> diff -r 57e6d7218427 linux-2.6-xen-sparse/include/asm-ia64/processor.h
> --- a/linux-2.6-xen-sparse/include/asm-ia64/processor.h Fri Feb
3
> 18:45:14 2006 +++
> b/linux-2.6-xen-sparse/include/asm-ia64/processor.h Mon Feb 6
> 03:56:58 2006 @@ -21,16 +21,13 @@ #include <asm/ustack.h>
> #include <asm/privop.h>
>
> -/* Our arch specific arch_init_sched_domain is in
> arch/ia64/kernel/domain.c */
> -#define ARCH_HAS_SCHED_DOMAIN
> -
> #define IA64_NUM_DBG_REGS 8
> /*
> * Limits for PMC and PMD are set to less than maximum architected
> values
> * but should be sufficient for a while
> */
> -#define IA64_NUM_PMC_REGS 32
> -#define IA64_NUM_PMD_REGS 32
> +#define IA64_NUM_PMC_REGS 64
> +#define IA64_NUM_PMD_REGS 64
>
> #define DEFAULT_MAP_BASE __IA64_UL_CONST(0x2000000000000000)
> #define DEFAULT_TASK_SIZE __IA64_UL_CONST(0xa000000000000000)
> @@ -356,7 +353,7 @@
> /* Return instruction pointer of blocked task TSK. */
> #define KSTK_EIP(tsk) \
> ({ \
> - struct pt_regs *_regs = ia64_task_regs(tsk); \
> + struct pt_regs *_regs = task_pt_regs(tsk); \
> _regs->cr_iip + ia64_psr(_regs)->ri; \
> })
>
> diff -r 57e6d7218427 linux-2.6-xen-sparse/include/asm-ia64/system.h
> --- a/linux-2.6-xen-sparse/include/asm-ia64/system.h Fri Feb 3
> 18:45:14 2006 +++
> b/linux-2.6-xen-sparse/include/asm-ia64/system.h Mon Feb 6
03:56:58
> 2006 @@ -19,12 +19,13 @@ #include <asm/pal.h>
> #include <asm/percpu.h>
>
> -#define GATE_ADDR __IA64_UL_CONST(0xa000000000000000)
> +#define GATE_ADDR RGN_BASE(RGN_GATE)
> +
> /*
> * 0xa000000000000000+2*PERCPU_PAGE_SIZE
> * - 0xa000000000000000+3*PERCPU_PAGE_SIZE remain unmapped (guard
> page) */
> -#define KERNEL_START __IA64_UL_CONST(0xa000000100000000)
> +#define KERNEL_START (GATE_ADDR+0x100000000)
> #define PERCPU_ADDR (-PERCPU_PAGE_SIZE)
>
> #ifndef __ASSEMBLY__
> @@ -183,8 +184,6 @@
>
> #ifdef __KERNEL__
>
> -#define prepare_to_switch() do { } while(0)
> -
> #ifdef CONFIG_IA32_SUPPORT
> # define IS_IA32_PROCESS(regs) (ia64_psr(regs)->is != 0)
> #else
> @@ -220,14 +219,14 @@
>
> #define IA64_HAS_EXTRA_STATE(t)
\
> ((t)->thread.flags &
(IA64_THREAD_DBG_VALID|IA64_THREAD_PM_VALID) \
> - || IS_IA32_PROCESS(ia64_task_regs(t)) || PERFMON_IS_SYSWIDE())
> + || IS_IA32_PROCESS(task_pt_regs(t)) || PERFMON_IS_SYSWIDE())
>
> #define __switch_to(prev,next,last) do {
\
> if (IA64_HAS_EXTRA_STATE(prev))
\
> ia64_save_extra(prev);
\
> if (IA64_HAS_EXTRA_STATE(next))
\
> ia64_load_extra(next);
\
> - ia64_psr(ia64_task_regs(next))->dfh =
> !ia64_is_local_fpu_owner(next); \
> + ia64_psr(task_pt_regs(next))->dfh =
> !ia64_is_local_fpu_owner(next); \ (last) =
> ia64_switch_to((next));
\ } while (0)
>
> @@ -239,8 +238,8 @@
> * the latest fph state from another CPU. In other words: eager
> save, lazy restore. */
> # define switch_to(prev,next,last) do {
\
> - if (ia64_psr(ia64_task_regs(prev))->mfh &&
> ia64_is_local_fpu_owner(prev)) { \
> - ia64_psr(ia64_task_regs(prev))->mfh = 0;
\
> + if (ia64_psr(task_pt_regs(prev))->mfh &&
> ia64_is_local_fpu_owner(prev)) { \
> + ia64_psr(task_pt_regs(prev))->mfh = 0;
\ (prev)->thread.flags
> |= IA64_THREAD_FPH_VALID; \
> __ia64_save_fpu((prev)->thread.fph);
\ }
\
> @@ -274,17 +273,13 @@
> * of that CPU which will not be released, because there we wait for
> the
> * tasklist_lock to become available.
> */
> -#define prepare_arch_switch(rq, next) \
> -do { \
> - spin_lock(&(next)->switch_lock); \
> - spin_unlock(&(rq)->lock); \
> -} while (0)
> -#define finish_arch_switch(rq,
> prev) spin_unlock_irq(&(prev)->switch_lock)
> -#define task_running(rq, p) ((rq)->curr == (p) ||
> spin_is_locked(&(p)->switch_lock)) -
> +#define __ARCH_WANT_UNLOCKED_CTXSW
> +
> +#define ARCH_HAS_PREFETCH_SWITCH_STACK
> #define ia64_platform_is(x) (strcmp(x, platform_name) == 0)
>
> void cpu_idle_wait(void);
> +void sched_cacheflush(void);
>
> #define arch_align_stack(x) (x)
>
>
>
>
> _______________________________________________
> Xen-ia64-devel mailing list
> Xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-ia64-devel
_______________________________________________
Xen-ia64-devel mailing list
Xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-ia64-devel
|
Home