Hi Christian,
Here's a patch that updates ia64 to 2.6.16-rc2 on xen-unstable. This
boots dom0 and domU on an rx2600. There were still several files that
were accidentally reverted by the merge-ups (that weren't fixed by cset
8743). Those are included here with the 2.6.15 patch re-applied as well
as changes between 2.6.15 and 2.6.16-rc2. Specifically, these are
pal.h, processor.h and system.h. This patch also reverts changes to
include/asm-ia64/hypercall.h and hypervisor.h from cset 8742. Thanks,
Alex
Signed-off-by: Alex Williamson <alex.williamson@xxxxxx>
---
buildconfigs/linux-defconfig_xen0_ia64 | 101 +++++++++++++--------
buildconfigs/linux-defconfig_xenU_ia64 | 96 ++++++++++++-------
linux-2.6-xen-sparse/arch/ia64/Makefile | 7 -
linux-2.6-xen-sparse/arch/ia64/kernel/entry.S | 1
linux-2.6-xen-sparse/arch/ia64/kernel/head.S | 2
linux-2.6-xen-sparse/arch/ia64/kernel/setup.c | 26 ++++-
linux-2.6-xen-sparse/include/asm-ia64/hypercall.h | 4
linux-2.6-xen-sparse/include/asm-ia64/hypervisor.h | 4
linux-2.6-xen-sparse/include/asm-ia64/pal.h | 23 ++++
linux-2.6-xen-sparse/include/asm-ia64/processor.h | 9 -
linux-2.6-xen-sparse/include/asm-ia64/system.h | 27 ++---
11 files changed, 192 insertions(+), 108 deletions(-)
diff -r 57e6d7218427 buildconfigs/linux-defconfig_xen0_ia64
--- a/buildconfigs/linux-defconfig_xen0_ia64 Fri Feb 3 18:45:14 2006
+++ b/buildconfigs/linux-defconfig_xen0_ia64 Mon Feb 6 03:56:58 2006
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-xen0
-# Wed Feb 1 13:18:15 2006
+# Linux kernel version: 2.6.16-rc2-xen0
+# Mon Feb 6 02:48:43 2006
#
#
@@ -24,8 +24,6 @@
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
@@ -35,8 +33,10 @@
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -45,8 +45,10 @@
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -170,6 +172,7 @@
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_CONTAINER=y
@@ -247,16 +250,13 @@
#
# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_CONNTRACK is not set
# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-CONFIG_IP_NF_ARPTABLES=y
-# CONFIG_IP_NF_ARPFILTER is not set
-# CONFIG_IP_NF_ARP_MANGLE is not set
#
# Bridge: Netfilter Configuration
@@ -272,6 +272,11 @@
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_BRIDGE=y
# CONFIG_VLAN_8021Q is not set
@@ -471,13 +476,7 @@
CONFIG_SCSI_QLOGIC_FC=y
# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
CONFIG_SCSI_QLOGIC_1280=y
-CONFIG_SCSI_QLA2XXX=y
-CONFIG_SCSI_QLA21XX=y
-CONFIG_SCSI_QLA22XX=y
-CONFIG_SCSI_QLA2300=y
-CONFIG_SCSI_QLA2322=y
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
@@ -588,12 +587,14 @@
# CONFIG_DL2K is not set
CONFIG_E1000=y
# CONFIG_E1000_NAPI is not set
+# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
@@ -707,12 +708,15 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
@@ -725,6 +729,7 @@
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_ACPI=y
CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
@@ -735,7 +740,6 @@
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -832,6 +836,12 @@
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
@@ -872,6 +882,7 @@
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
@@ -899,6 +910,7 @@
#
# Video Adapters
#
+# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
@@ -960,7 +972,6 @@
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
@@ -989,8 +1000,6 @@
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
-CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_AC97_BUS=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
@@ -1001,15 +1010,18 @@
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
-CONFIG_SND_GENERIC_DRIVER=y
#
# Generic devices
#
CONFIG_SND_MPU401_UART=y
CONFIG_SND_OPL3_LIB=y
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_AC97_BUS=y
CONFIG_SND_DUMMY=y
CONFIG_SND_VIRMIDI=y
CONFIG_SND_MTPAV=y
@@ -1019,6 +1031,7 @@
#
# PCI devices
#
+# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALI5451 is not set
CONFIG_SND_ATIIXP=y
# CONFIG_SND_ATIIXP_MODEM is not set
@@ -1027,39 +1040,39 @@
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
CONFIG_SND_FM801=y
CONFIG_SND_FM801_TEA575X=y
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_YMFPCI is not set
#
# USB devices
@@ -1132,12 +1145,15 @@
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set
@@ -1151,6 +1167,7 @@
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
@@ -1166,6 +1183,7 @@
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
+# CONFIG_USB_ET61X251 is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
@@ -1232,6 +1250,10 @@
#
# SN Devices
+#
+
+#
+# EDAC - error detection and reporting (RAS)
#
#
@@ -1263,6 +1285,7 @@
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -1301,6 +1324,7 @@
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -1370,6 +1394,7 @@
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
#
@@ -1437,18 +1462,20 @@
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
diff -r 57e6d7218427 buildconfigs/linux-defconfig_xenU_ia64
--- a/buildconfigs/linux-defconfig_xenU_ia64 Fri Feb 3 18:45:14 2006
+++ b/buildconfigs/linux-defconfig_xenU_ia64 Mon Feb 6 03:56:58 2006
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-xenU
-# Wed Feb 1 14:19:46 2006
+# Linux kernel version: 2.6.16-rc2-xenU
+# Mon Feb 6 03:35:30 2006
#
#
@@ -26,8 +26,6 @@
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
@@ -36,8 +34,10 @@
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -46,8 +46,10 @@
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -169,6 +171,7 @@
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_ACPI_CONTAINER is not set
@@ -245,16 +248,13 @@
#
# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_CONNTRACK is not set
# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-CONFIG_IP_NF_ARPTABLES=y
-# CONFIG_IP_NF_ARPFILTER is not set
-# CONFIG_IP_NF_ARP_MANGLE is not set
#
# DCCP Configuration (EXPERIMENTAL)
@@ -265,6 +265,11 @@
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
@@ -412,13 +417,7 @@
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
CONFIG_SCSI_QLOGIC_1280=y
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
@@ -519,12 +518,14 @@
# CONFIG_DL2K is not set
CONFIG_E1000=y
# CONFIG_E1000_NAPI is not set
+# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
@@ -619,6 +620,7 @@
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_ACPI=y
CONFIG_SERIAL_8250_NR_UARTS=8
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
@@ -726,6 +728,12 @@
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
@@ -766,6 +774,7 @@
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
@@ -793,6 +802,7 @@
#
# Video Adapters
#
+# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
@@ -855,7 +865,6 @@
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_VIRTUAL is not set
@@ -878,8 +887,6 @@
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
-CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_AC97_BUS=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
@@ -890,6 +897,8 @@
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
@@ -898,6 +907,8 @@
#
CONFIG_SND_MPU401_UART=y
CONFIG_SND_OPL3_LIB=y
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_AC97_BUS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
@@ -907,6 +918,7 @@
#
# PCI devices
#
+# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
@@ -915,39 +927,39 @@
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
CONFIG_SND_FM801=y
CONFIG_SND_FM801_TEA575X=y
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_YMFPCI is not set
#
# USB devices
@@ -1012,12 +1024,15 @@
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set
@@ -1031,6 +1046,7 @@
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
@@ -1046,6 +1062,7 @@
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
+# CONFIG_USB_ET61X251 is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
@@ -1111,6 +1128,10 @@
#
# SN Devices
+#
+
+#
+# EDAC - error detection and reporting (RAS)
#
#
@@ -1132,6 +1153,7 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -1170,6 +1192,7 @@
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -1234,6 +1257,7 @@
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
#
@@ -1301,18 +1325,20 @@
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
diff -r 57e6d7218427 linux-2.6-xen-sparse/arch/ia64/Makefile
--- a/linux-2.6-xen-sparse/arch/ia64/Makefile Fri Feb 3 18:45:14 2006
+++ b/linux-2.6-xen-sparse/arch/ia64/Makefile Mon Feb 6 03:56:58 2006
@@ -25,7 +25,6 @@
-falign-functions=32 -frename-registers
-fno-optimize-sibling-calls
CFLAGS_KERNEL := -mconstant-gp
-GCC_VERSION := $(call cc-version)
GAS_STATUS = $(shell $(srctree)/arch/ia64/scripts/check-gas "$(CC)"
"$(OBJDUMP)")
CPPFLAGS += $(shell $(srctree)/arch/ia64/scripts/toolchain-flags "$(CC)"
"$(OBJDUMP)" "$(READELF)")
@@ -37,11 +36,7 @@
ftp://ftp.hpl.hp.com/pub/linux-ia64/gas-030124.tar.gz)
endif
-ifneq ($(shell if [ $(GCC_VERSION) -lt 0300 ] ; then echo "bad"; fi ;),)
-$(error Sorry, your compiler is too old. GCC v2.96 is known to generate bad
code.)
-endif
-
-ifeq ($(GCC_VERSION),0304)
+ifeq ($(call cc-version),0304)
cflags-$(CONFIG_ITANIUM) += -mtune=merced
cflags-$(CONFIG_MCKINLEY) += -mtune=mckinley
endif
diff -r 57e6d7218427 linux-2.6-xen-sparse/arch/ia64/kernel/entry.S
--- a/linux-2.6-xen-sparse/arch/ia64/kernel/entry.S Fri Feb 3 18:45:14 2006
+++ b/linux-2.6-xen-sparse/arch/ia64/kernel/entry.S Mon Feb 6 03:56:58 2006
@@ -1606,5 +1606,6 @@
data8 sys_inotify_init
data8 sys_inotify_add_watch
data8 sys_inotify_rm_watch
+ data8 sys_migrate_pages // 1280
.org sys_call_table + 8*NR_syscalls // guard against failures to
increase NR_syscalls
diff -r 57e6d7218427 linux-2.6-xen-sparse/arch/ia64/kernel/head.S
--- a/linux-2.6-xen-sparse/arch/ia64/kernel/head.S Fri Feb 3 18:45:14 2006
+++ b/linux-2.6-xen-sparse/arch/ia64/kernel/head.S Mon Feb 6 03:56:58 2006
@@ -1064,7 +1064,7 @@
* the clobber lists for spin_lock() in include/asm-ia64/spinlock.h.
*/
-#if __GNUC__ < 3 || (__GNUC__ == 3 && __GNUC_MINOR__ < 3)
+#if (__GNUC__ == 3 && __GNUC_MINOR__ < 3)
GLOBAL_ENTRY(ia64_spinlock_contention_pre3_4)
.prologue
diff -r 57e6d7218427 linux-2.6-xen-sparse/arch/ia64/kernel/setup.c
--- a/linux-2.6-xen-sparse/arch/ia64/kernel/setup.c Fri Feb 3 18:45:14 2006
+++ b/linux-2.6-xen-sparse/arch/ia64/kernel/setup.c Mon Feb 6 03:56:58 2006
@@ -43,6 +43,7 @@
#include <linux/initrd.h>
#include <linux/platform.h>
#include <linux/pm.h>
+#include <linux/cpufreq.h>
#include <asm/ia32.h>
#include <asm/machvec.h>
@@ -59,6 +60,7 @@
#include <asm/smp.h>
#include <asm/system.h>
#include <asm/unistd.h>
+#include <asm/system.h>
#if defined(CONFIG_SMP) && (IA64_CPU_SIZE > PAGE_SIZE)
# error "struct cpuinfo_ia64 too big!"
@@ -521,6 +523,7 @@
char family[32], features[128], *cp, sep;
struct cpuinfo_ia64 *c = v;
unsigned long mask;
+ unsigned long proc_freq;
int i;
mask = c->features;
@@ -552,6 +555,10 @@
*cp++ = sep;
sprintf(cp, " 0x%lx", mask);
}
+
+ proc_freq = cpufreq_quick_get(cpunum);
+ if (!proc_freq)
+ proc_freq = c->proc_freq / 1000;
seq_printf(m,
"processor : %d\n"
@@ -569,7 +576,7 @@
"BogoMIPS : %lu.%02lu\n",
cpunum, c->vendor, family, c->model, c->revision, c->archrev,
features, c->ppn, c->number,
- c->proc_freq / 1000000, c->proc_freq % 1000000,
+ proc_freq / 1000, proc_freq % 1000,
c->itc_freq / 1000000, c->itc_freq % 1000000,
lpj*HZ/500000, (lpj*HZ/5000) % 100);
#ifdef CONFIG_SMP
@@ -693,6 +700,7 @@
get_max_cacheline_size (void)
{
unsigned long line_size, max = 1;
+ unsigned int cache_size = 0;
u64 l, levels, unique_caches;
pal_cache_config_info_t cci;
s64 status;
@@ -722,6 +730,8 @@
line_size = 1 << cci.pcci_line_size;
if (line_size > max)
max = line_size;
+ if (cache_size < cci.pcci_cache_size)
+ cache_size = cci.pcci_cache_size;
if (!cci.pcci_unified) {
status = ia64_pal_cache_config_info(l,
/* cache_type
(instruction)= */ 1,
@@ -738,6 +748,9 @@
ia64_i_cache_stride_shift = cci.pcci_stride;
}
out:
+#ifdef CONFIG_SMP
+ max_cache_size = max(max_cache_size, cache_size);
+#endif
if (max > ia64_max_cacheline_size)
ia64_max_cacheline_size = max;
}
@@ -792,7 +805,7 @@
#endif
/* Clear the stack memory reserved for pt_regs: */
- memset(ia64_task_regs(current), 0, sizeof(struct pt_regs));
+ memset(task_pt_regs(current), 0, sizeof(struct pt_regs));
ia64_set_kr(IA64_KR_FPU_OWNER, 0);
@@ -868,6 +881,15 @@
pm_idle = default_idle;
}
+/*
+ * On SMP systems, when the scheduler does migration-cost autodetection,
+ * it needs a way to flush as much of the CPU's caches as possible.
+ */
+void sched_cacheflush(void)
+{
+ ia64_sal_cache_flush(3);
+}
+
void
check_bugs (void)
{
diff -r 57e6d7218427 linux-2.6-xen-sparse/include/asm-ia64/hypercall.h
--- a/linux-2.6-xen-sparse/include/asm-ia64/hypercall.h Fri Feb 3 18:45:14 2006
+++ b/linux-2.6-xen-sparse/include/asm-ia64/hypercall.h Mon Feb 6 03:56:58 2006
@@ -30,8 +30,8 @@
#ifndef __HYPERCALL_H__
#define __HYPERCALL_H__
-#include <asm-xen/xen-public/xen.h>
-#include <asm-xen/xen-public/sched.h>
+#include <xen/interface/xen.h>
+#include <xen/interface/sched.h>
/* FIXME: temp place to hold these page related macros */
#include <asm/page.h>
diff -r 57e6d7218427 linux-2.6-xen-sparse/include/asm-ia64/hypervisor.h
--- a/linux-2.6-xen-sparse/include/asm-ia64/hypervisor.h Fri Feb 3
18:45:14 2006
+++ b/linux-2.6-xen-sparse/include/asm-ia64/hypervisor.h Mon Feb 6
03:56:58 2006
@@ -34,8 +34,8 @@
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/version.h>
-#include <asm-xen/xen-public/xen.h>
-#include <asm-xen/xen-public/dom0_ops.h>
+#include <xen/interface/xen.h>
+#include <xen/interface/dom0_ops.h>
#include <asm/ptrace.h>
#include <asm/page.h>
diff -r 57e6d7218427 linux-2.6-xen-sparse/include/asm-ia64/pal.h
--- a/linux-2.6-xen-sparse/include/asm-ia64/pal.h Fri Feb 3 18:45:14 2006
+++ b/linux-2.6-xen-sparse/include/asm-ia64/pal.h Mon Feb 6 03:56:58 2006
@@ -75,6 +75,8 @@
#define PAL_CACHE_READ 259 /* read tag & data of cacheline for
diagnostic testing */
#define PAL_CACHE_WRITE 260 /* write tag & data of
cacheline for diagnostic testing */
#define PAL_VM_TR_READ 261 /* read contents of translation
register */
+#define PAL_GET_PSTATE 262 /* get the current P-state */
+#define PAL_SET_PSTATE 263 /* set the P-state */
#ifndef __ASSEMBLY__
@@ -926,7 +928,7 @@
ia64_pal_cache_flush (u64 cache_type, u64 invalidate, u64 *progress, u64
*vector)
{
struct ia64_pal_retval iprv;
- PAL_CALL_IC_OFF(iprv, PAL_CACHE_FLUSH, cache_type, invalidate,
*progress);
+ PAL_CALL(iprv, PAL_CACHE_FLUSH, cache_type, invalidate, *progress);
if (vector)
*vector = iprv.v0;
*progress = iprv.v1;
@@ -1109,6 +1111,25 @@
{
struct ia64_pal_retval iprv;
PAL_CALL_STK(iprv, PAL_HALT_INFO, (unsigned long) power_buf, 0, 0);
+ return iprv.status;
+}
+
+/* Get the current P-state information */
+static inline s64
+ia64_pal_get_pstate (u64 *pstate_index)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL_STK(iprv, PAL_GET_PSTATE, 0, 0, 0);
+ *pstate_index = iprv.v0;
+ return iprv.status;
+}
+
+/* Set the P-state */
+static inline s64
+ia64_pal_set_pstate (u64 pstate_index)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL_STK(iprv, PAL_SET_PSTATE, pstate_index, 0, 0);
return iprv.status;
}
diff -r 57e6d7218427 linux-2.6-xen-sparse/include/asm-ia64/processor.h
--- a/linux-2.6-xen-sparse/include/asm-ia64/processor.h Fri Feb 3 18:45:14 2006
+++ b/linux-2.6-xen-sparse/include/asm-ia64/processor.h Mon Feb 6 03:56:58 2006
@@ -21,16 +21,13 @@
#include <asm/ustack.h>
#include <asm/privop.h>
-/* Our arch specific arch_init_sched_domain is in arch/ia64/kernel/domain.c */
-#define ARCH_HAS_SCHED_DOMAIN
-
#define IA64_NUM_DBG_REGS 8
/*
* Limits for PMC and PMD are set to less than maximum architected values
* but should be sufficient for a while
*/
-#define IA64_NUM_PMC_REGS 32
-#define IA64_NUM_PMD_REGS 32
+#define IA64_NUM_PMC_REGS 64
+#define IA64_NUM_PMD_REGS 64
#define DEFAULT_MAP_BASE __IA64_UL_CONST(0x2000000000000000)
#define DEFAULT_TASK_SIZE __IA64_UL_CONST(0xa000000000000000)
@@ -356,7 +353,7 @@
/* Return instruction pointer of blocked task TSK. */
#define KSTK_EIP(tsk) \
({ \
- struct pt_regs *_regs = ia64_task_regs(tsk); \
+ struct pt_regs *_regs = task_pt_regs(tsk); \
_regs->cr_iip + ia64_psr(_regs)->ri; \
})
diff -r 57e6d7218427 linux-2.6-xen-sparse/include/asm-ia64/system.h
--- a/linux-2.6-xen-sparse/include/asm-ia64/system.h Fri Feb 3 18:45:14 2006
+++ b/linux-2.6-xen-sparse/include/asm-ia64/system.h Mon Feb 6 03:56:58 2006
@@ -19,12 +19,13 @@
#include <asm/pal.h>
#include <asm/percpu.h>
-#define GATE_ADDR __IA64_UL_CONST(0xa000000000000000)
+#define GATE_ADDR RGN_BASE(RGN_GATE)
+
/*
* 0xa000000000000000+2*PERCPU_PAGE_SIZE
* - 0xa000000000000000+3*PERCPU_PAGE_SIZE remain unmapped (guard page)
*/
-#define KERNEL_START __IA64_UL_CONST(0xa000000100000000)
+#define KERNEL_START (GATE_ADDR+0x100000000)
#define PERCPU_ADDR (-PERCPU_PAGE_SIZE)
#ifndef __ASSEMBLY__
@@ -183,8 +184,6 @@
#ifdef __KERNEL__
-#define prepare_to_switch() do { } while(0)
-
#ifdef CONFIG_IA32_SUPPORT
# define IS_IA32_PROCESS(regs) (ia64_psr(regs)->is != 0)
#else
@@ -220,14 +219,14 @@
#define IA64_HAS_EXTRA_STATE(t)
\
((t)->thread.flags & (IA64_THREAD_DBG_VALID|IA64_THREAD_PM_VALID)
\
- || IS_IA32_PROCESS(ia64_task_regs(t)) || PERFMON_IS_SYSWIDE())
+ || IS_IA32_PROCESS(task_pt_regs(t)) || PERFMON_IS_SYSWIDE())
#define __switch_to(prev,next,last) do {
\
if (IA64_HAS_EXTRA_STATE(prev))
\
ia64_save_extra(prev);
\
if (IA64_HAS_EXTRA_STATE(next))
\
ia64_load_extra(next);
\
- ia64_psr(ia64_task_regs(next))->dfh = !ia64_is_local_fpu_owner(next);
\
+ ia64_psr(task_pt_regs(next))->dfh = !ia64_is_local_fpu_owner(next);
\
(last) = ia64_switch_to((next));
\
} while (0)
@@ -239,8 +238,8 @@
* the latest fph state from another CPU. In other words: eager save, lazy
restore.
*/
# define switch_to(prev,next,last) do {
\
- if (ia64_psr(ia64_task_regs(prev))->mfh &&
ia64_is_local_fpu_owner(prev)) { \
- ia64_psr(ia64_task_regs(prev))->mfh = 0;
\
+ if (ia64_psr(task_pt_regs(prev))->mfh && ia64_is_local_fpu_owner(prev))
{ \
+ ia64_psr(task_pt_regs(prev))->mfh = 0; \
(prev)->thread.flags |= IA64_THREAD_FPH_VALID;
\
__ia64_save_fpu((prev)->thread.fph);
\
}
\
@@ -274,17 +273,13 @@
* of that CPU which will not be released, because there we wait for the
* tasklist_lock to become available.
*/
-#define prepare_arch_switch(rq, next) \
-do { \
- spin_lock(&(next)->switch_lock); \
- spin_unlock(&(rq)->lock); \
-} while (0)
-#define finish_arch_switch(rq, prev) spin_unlock_irq(&(prev)->switch_lock)
-#define task_running(rq, p) ((rq)->curr == (p) ||
spin_is_locked(&(p)->switch_lock))
-
+#define __ARCH_WANT_UNLOCKED_CTXSW
+
+#define ARCH_HAS_PREFETCH_SWITCH_STACK
#define ia64_platform_is(x) (strcmp(x, platform_name) == 0)
void cpu_idle_wait(void);
+void sched_cacheflush(void);
#define arch_align_stack(x) (x)
_______________________________________________
Xen-ia64-devel mailing list
Xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-ia64-devel
|
Home