This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
Home Products Support Community News


[Xen-devel] pvops Domain 0 Creased when boot Xen-unstable on Ubuntu10.04

To: Xen Devel <xen-devel@xxxxxxxxxxxxxxxxxxx>
Subject: [Xen-devel] pvops Domain 0 Creased when boot Xen-unstable on Ubuntu10.04
From: Bei Guan <gbtju85@xxxxxxxxx>
Date: Tue, 17 May 2011 01:42:15 +0800
Cc: Andrei Warkentin <andreiw@xxxxxxxxxxxx>
Delivery-date: Mon, 16 May 2011 10:43:34 -0700
Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:mime-version:date:message-id:subject:from:to:cc :content-type; bh=yFMxwFXso0qdZtMBZqrnZ6TjX2qPl+QA89Psz1WfslM=; b=gcSfkjVeBuvLX5Di+mOPZl5yAWCB9cpCmcNE1ucpyBPiqdYvZ+2y6QuXu4/jJltF41 HrsU81It0SnTYdmMAImgiTgbaw1v/LoGtHRIBaQ++7OQDU4XXgin0yccPKtvKy2UOjUe FDaNnI3KIVevUFya3buZ+dNE+bEh2NmxIU3XI=
Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:date:message-id:subject:from:to:cc:content-type; b=vtSYSxlzW2IY6xLPTzgvXjAiMCyYeyuxlOpE9SR0XiR73KDv19c1IM4iHKV5AjhKQD R35pYeWyvSfWnqLDggP5ELe4h2Iw/kpFxGiH6zo5ROOK6js6y1WQlmB8NlzIkBcwilxe MB82WjYlUP0jiCuV8pBaebs+FbP5y2lmf/Gxo=
Envelope-to: www-data@xxxxxxxxxxxxxxxxxxx
List-help: <mailto:xen-devel-request@lists.xensource.com?subject=help>
List-id: Xen developer discussion <xen-devel.lists.xensource.com>
List-post: <mailto:xen-devel@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/mailman/listinfo/xen-devel>, <mailto:xen-devel-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/mailman/listinfo/xen-devel>, <mailto:xen-devel-request@lists.xensource.com?subject=unsubscribe>
Sender: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx
Hi All,

I try to install Xen-4.2-unstable with pvops dom0 kernel( on Ubuntu10.04. But the kernel panic when I reboot. The message got with the serial debugging is as the following. And the config file of dom0 kernel is also attached. Can anyone give me some advice?
And what's the problem with my installation?

Many thanks,
Bei Guan

 __  __            _  _    ____                     _        _     _      
 \ \/ /___ _ __   | || |  |___ \    _   _ _ __  ___| |_ __ _| |__ | | ___ 
  \  // _ \ '_ \  | || |_   __) |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \
  /  \  __/ | | | |__   _| / __/|__| |_| | | | \__ \ || (_| | |_) | |  __/
 /_/\_\___|_| |_|    |_|(_)_____|   \__,_|_| |_|___/\__\__,_|_.__/|_|\___|
(XEN) Xen version 4.2-unstable (root@) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) Mon May 16 18:47:25 HKT 2011
(XEN) Latest ChangeSet: Thu May 12 16:42:54 2011 +0100 23339:f9bb0bbea7c2
(XEN) Bootloader: GRUB 1.98-1ubuntu12
(XEN) Command line: dummy=dummy dom0_mem=2048M com1=115200,8n1 console=com1
(XEN) Video information:
(XEN)  VGA is text mode 80x25, font 8x16
(XEN)  VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN)  EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN)  Found 1 MBR signatures
(XEN)  Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN)  0000000000000000 - 000000000009dc00 (usable)
(XEN)  000000000009dc00 - 00000000000a0000 (reserved)
(XEN)  00000000000d2000 - 00000000000d4000 (reserved)
(XEN)  00000000000e0000 - 0000000000100000 (reserved)
(XEN)  0000000000100000 - 00000000bfeb0000 (usable)
(XEN)  00000000bfeb0000 - 00000000bfecb000 (ACPI data)
(XEN)  00000000bfecb000 - 00000000bfece000 (ACPI NVS)
(XEN)  00000000bfece000 - 00000000c0000000 (reserved)
(XEN)  00000000e0000000 - 00000000f0000000 (reserved)
(XEN)  00000000fec00000 - 00000000fec10000 (reserved)
(XEN)  00000000fed1c000 - 00000000fed20000 (reserved)
(XEN)  00000000fee00000 - 00000000fee01000 (reserved)
(XEN)  00000000ff000000 - 0000000100000000 (reserved)
(XEN)  0000000100000000 - 0000000134000000 (usable)
(XEN) ACPI: RSDP 000F61B0, 0014 (r0 PTLTD )
(XEN) ACPI: RSDT BFEC103B, 0048 (r1 LENOVO TC-2J          37  LTP        0)
(XEN) ACPI: FACP BFECAE2B, 0074 (r1 LENOVO TC-2J          37 PTL         1)
(XEN) ACPI: DSDT BFEC42E4, 6B47 (r1 LENOVO TC-2J          37 MSFT  100000E)
(XEN) ACPI: TCPA BFECAE9F, 0032 (r2 LENOVO TC-2J          37 PTL         0)
(XEN) ACPI: ASF! BFECAED1, 0063 (r16   CETP    2JETP       37 PTL         1)
(XEN) ACPI: MCFG BFECAF34, 003C (r1 PTLTD    M2JG         37  LTP        0)
(XEN) ACPI: APIC BFECAF70, 0068 (r1 PTLTD   A2JC         37  LTP        0)
(XEN) ACPI: BOOT BFECAFD8, 0028 (r1 PTLTD  $SB2JBL$       37  LTP        1)
(XEN) ACPI: SSDT BFEC252E, 025F (r1  PmRef  Cpu0Tst     3000 INTL 20050228)
(XEN) ACPI: SSDT BFEC2488, 00A6 (r1  PmRef  Cpu1Tst     3000 INTL 20050228)
(XEN) ACPI: SSDT BFEC1083, 1405 (r1  PmRef    CpuPm     3000 INTL 20050228)
(XEN) System RAM: 3902MB (3995956kB)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-0000000134000000
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000f6300
(XEN) DMI present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x1008
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[fe10,0], pm1x_evt[1000,0]
(XEN) ACPI:                  wakeup_vec[bfecdfcc], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) Processor #0 6:15 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
(XEN) Processor #1 6:15 APIC version 20
(XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode:  Flat.  Using 1 I/O APICs
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 9
(XEN) PCI: MCFG area at e0000000 reserved in E820
(XEN) Table is not found!
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) IRQ limits: 24 GSI, 376 MSI/MSI-X
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 1862.063 MHz processor.
(XEN) Initing memory sharing.
(XEN) mce_intel.c:1206: MCA Capability: BCAST 1 SER 0 CMCI 0 firstbank 1 extended MCE MSR 0
(XEN) CPU0: Thermal monitoring handled by SMI
(XEN) Intel machine check reporting enabled
(XEN) I/O virtualisation disabled
(XEN)  -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) Platform timer is 3.579MHz ACPI PM Timer
?XEN) Allocated console ring of 16 KiB.
(XEN) VMX: Supported advanced features:
(XEN)  - APIC TPR shadow
(XEN)  - MSR direct-access bitmap
(XEN) HVM: ASIDs disabled.
(XEN) HVM: VMX enabled
(XEN) Brought up 2 CPUs
(XEN) CPUIDLE: disabled due to no HPET. Force enable with 'cpuidle'.
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0x87c000
(XEN) elf_parse_binary: phdr: paddr=0x187c000 memsz=0xcc498
(XEN) elf_parse_binary: phdr: paddr=0x1949000 memsz=0x888
(XEN) elf_parse_binary: phdr: paddr=0x194a000 memsz=0x159d8
(XEN) elf_parse_binary: phdr: paddr=0x1960000 memsz=0x28b000
(XEN) elf_parse_binary: memory: 0x1000000 -> 0x1beb000
(XEN) elf_xen_parse_note: GUEST_OS = "linux"
(XEN) elf_xen_parse_note: GUEST_VERSION = "2.6"
(XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0"
(XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000
(XEN) elf_xen_parse_note: ENTRY = 0xffffffff81960200
(XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81009000
(XEN) elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb"
(XEN) elf_xen_parse_note: PAE_MODE = "yes"
(XEN) elf_xen_parse_note: LOADER = "generic"
(XEN) elf_xen_parse_note: unknown xen elf note (0xd)
(XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1
(XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000
(XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0
(XEN) elf_xen_addr_calc_check: addresses:
(XEN)     virt_base        = 0xffffffff80000000
(XEN)     elf_paddr_offset = 0x0
(XEN)     virt_offset      = 0xffffffff80000000
(XEN)     virt_kstart      = 0xffffffff81000000
(XEN)     virt_kend        = 0xffffffff81beb000
(XEN)     virt_entry       = 0xffffffff81960200
(XEN)     p2m_base         = 0xffffffffffffffff
(XEN)  Xen  kernel: 64-bit, lsb, compat32
(XEN)  Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1beb000
(XEN)  Dom0 alloc.:   0000000128000000->000000012c000000 (505970 pages to be allocated)
(XEN)  Init. ramdisk: 0000000133872000->0000000134000000
(XEN)  Loaded kernel: ffffffff81000000->ffffffff81beb000
(XEN)  Init. ramdisk: ffffffff81beb000->ffffffff82379000
(XEN)  Phys-Mach map: ffffffff82379000->ffffffff82779000
(XEN)  Start info:    ffffffff82779000->ffffffff827794b4
(XEN)  Page tables:   ffffffff8277a000->ffffffff82793000
(XEN)  Boot stack:    ffffffff82793000->ffffffff82794000
(XEN)  TOTAL:         ffffffff80000000->ffffffff82c00000
(XEN)  ENTRY ADDRESS: ffffffff81960200
(XEN) Dom0 has maximum 2 VCPUs
(XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff8187c000
(XEN) elf_load_binary: phdr 1 at 0xffffffff8187c000 -> 0xffffffff81948498
(XEN) elf_load_binary: phdr 2 at 0xffffffff81949000 -> 0xffffffff81949888
(XEN) elf_load_binary: phdr 3 at 0xffffffff8194a000 -> 0xffffffff8195f9d8
(XEN) elf_load_binary: phdr 4 at 0xffffffff81960000 -> 0xffffffff819eb000
(XEN) Scrubbing Free RAM: ..................done.
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 232kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
(XEN) PCI add device 00:00.0
(XEN) PCI add device 00:01.0
(XEN) PCI add device 00:1a.0
(XEN) PCI add device 00:1a.1
(XEN) PCI add device 00:1a.7
(XEN) PCI add device 00:1b.0
(XEN) PCI add device 00:1c.0
(XEN) PCI add device 00:1c.4
(XEN) PCI add device 00:1d.0
(XEN) PCI add device 00:1d.1
(XEN) PCI add device 00:1d.2
(XEN) PCI add device 00:1d.7
(XEN) PCI add device 00:1e.0
(XEN) PCI add device 00:1f.0
(XEN) PCI add device 00:1f.2
(XEN) PCI add device 00:1f.3
(XEN) PCI add device 00:1f.5
(XEN) PCI add device 01:00.0
(XEN) PCI add device 03:00.0
(XEN) Domain 0 crashed: rebooting machine in 5 seconds.

Attachment: config
Description: Binary data

Xen-devel mailing list