| |
|
 |
|
 |
|
|
|
| |
|
|
xen-devel
Re: [Xen-devel] [GIT PULL] Xen updates
Wednesday, October 27, 2010, 10:05:47 PM, you wrote:
> On 10/27/2010 12:40 PM, Sander Eikelenboom wrote:
>> Ah ok you are (of course) completely right thx !
>> What strikes me now .. is that when i used this xhci controller passed
>> through to a domU i:
>> a) saw only one IRQ/vector coupled to xhci_hcd in the /proc/interrupts
>> b) i don't see them being counted now in the dom0 although i use the
>> controller (i the domU this caused +/- 8000 interrupts a second .. so i
>> should be seeing something else the 0 i assume.
> The device is working but you're not seeing any interrupts for it? Strange.
> J
Grmbll sorry my mistake, early this day i shoved it in a USB2 port, to see if a
problem with the driver of the videograbber had any relation to usb2/usb3
controller.
But it didn't and was allready fixed.
Shoved it back in on the xhci controller and it counts fine now ...
Sorry for the noise !
And congratulations to you all on achieving this !!
Can't wait for pciback support :-)
--
Sander
>> --
>> Sander
>>
>>
>> CPU0 CPU1 CPU2 CPU3
>> 1: 8 0 0 0 xen-pirq-ioapic-edge
>> i8042
>> 8: 0 0 0 0 xen-pirq-ioapic-edge rtc0
>> 9: 0 0 0 0 xen-pirq-ioapic-level
>> acpi
>> 12: 103 0 0 0 xen-pirq-ioapic-edge
>> i8042
>> 16: 0 0 0 0 xen-pirq-ioapic-level
>> uhci_hcd:usb3
>> 18: 0 0 0 0 xen-pirq-ioapic-level
>> ehci_hcd:usb1, uhci_hcd:usb5, uhci_hcd:usb8
>> 19: 0 0 0 0 xen-pirq-ioapic-level
>> uhci_hcd:usb7
>> 21: 0 0 0 0 xen-pirq-ioapic-level
>> uhci_hcd:usb4
>> 23: 73410 0 0 0 xen-pirq-ioapic-level
>> ehci_hcd:usb2, uhci_hcd:usb6
>> 990: 0 0 0 0 xen-dyn-event
>> evtchn:xenstored
>> 991: 188 0 0 0 xen-dyn-event
>> evtchn:xenstored
>> 992: 10583 0 0 0 xen-pirq-msi eth1
>> 993: 1 0 0 0 xen-pirq-msi
>> 994: 0 0 0 0 xen-pirq-msi-x
>> xhci_hcd
>> 995: 0 0 0 0 xen-pirq-msi-x
>> xhci_hcd
>> 996: 0 0 0 0 xen-pirq-msi-x
>> xhci_hcd
>> 997: 0 0 0 0 xen-pirq-msi-x
>> xhci_hcd
>> 998: 1 0 0 0 xen-pirq-msi-x
>> xhci_hcd
>> 1000: 51648 0 0 0 xen-pirq-msi ahci
>> 1001: 1 0 0 0 xen-pirq-msi i915
>> 1002: 0 0 0 0 xen-percpu-virq
>> hvc_console
>> 1003: 133 0 0 0 xen-dyn-event xenbus
>> 1004: 0 0 0 15729 xen-percpu-ipi
>> callfuncsingle3
>> 1005: 0 0 0 0 xen-percpu-virq
>> debug3
>> 1006: 0 0 0 538 xen-percpu-ipi
>> callfunc3
>> 1007: 0 0 0 24048 xen-percpu-ipi
>> resched3
>> 1008: 0 0 0 525075 xen-percpu-virq
>> timer3
>> 1009: 0 0 19569 0 xen-percpu-ipi
>> callfuncsingle2
>> 1010: 0 0 0 0 xen-percpu-virq
>> debug2
>> 1011: 0 0 451 0 xen-percpu-ipi
>> callfunc2
>> 1012: 0 0 23590 0 xen-percpu-ipi
>> resched2
>> 1013: 0 0 523891 0 xen-percpu-virq
>> timer2
>> 1014: 0 13911 0 0 xen-percpu-ipi
>> callfuncsingle1
>> 1015: 0 0 0 0 xen-percpu-virq
>> debug1
>> 1016: 0 563 0 0 xen-percpu-ipi
>> callfunc1
>> 1017: 0 22079 0 0 xen-percpu-ipi
>> resched1
>> 1018: 0 519767 0 0 xen-percpu-virq
>> timer1
>> 1019: 1445 0 0 0 xen-percpu-ipi
>> callfuncsingle0
>> 1020: 0 0 0 0 xen-percpu-virq
>> debug0
>> 1021: 395 0 0 0 xen-percpu-ipi
>> callfunc0
>> 1022: 22182 0 0 0 xen-percpu-ipi
>> resched0
>> 1023: 583133 0 0 0 xen-percpu-virq
>> timer0
>> NMI: 0 0 0 0 Non-maskable interrupts
>> LOC: 0 0 0 0 Local timer interrupts
>> SPU: 0 0 0 0 Spurious interrupts
>> PMI: 0 0 0 0 Performance monitoring
>> interrupts
>> IWI: 0 0 0 0 IRQ work interrupts
>> RES: 22182 22079 23590 24048 Rescheduling interrupts
>> CAL: 1840 14474 20020 16268 Function call interrupts
>> TLB: 0 0 0 0 TLB shootdowns
>> TRM: 0 0 0 0 Thermal event interrupts
>> THR: 0 0 0 0 Threshold APIC interrupts
>> MCE: 0 0 0 0 Machine check exceptions
>> MCP: 0 0 0 0 Machine check polls
>> ERR: 0
>> MIS: 0
>>
>>
--
Best regards,
Sander mailto:linux@xxxxxxxxxxxxxx
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
|
|
| |
|
Home