| |
|
 |
|
 |
|
|
|
| |
|
|
xen-devel
[Xen-devel] Re: [PATCH 09/22] xen: Find an unbound irq number in reverse
>
> Unfortunately this is the wrong way to fix the issue: Xen has a range of
> allowed pirq for each domain and we don't know exactly what is the
> maximum pirq (see my patch "xen: get the maximum number of pirqs from
> xen" [1]).
> Considering that we might use the irq number returned by
> find_unbound_irq through xen_allocate_pirq as pirq number in some cases,
Ah, but we wouldn't! We would end up only using the 'find_unbound_irq' for
event channels. For IRQs that are for physical devices (either being
real devices passed in or QEMU PCI devices) we end up requesting an IRQ that
matches whatever the device has defined in dev->irq (or whatever the
vectors values for MSI/MSI-X devices that is provided) via the Xen PCI frontend
driver (in case of QEMU whatever its emulation provides).
> starting from the highest value could be unsafe.
> In practice it should be impossible to see this issue because it can
> only happen if the irq returned by xen_allocate_pirq is higher than the
> max pirq in xen. However AFAIK when we call xen_allocate_pirq with the
> intention of using the return value as pirq we always fall in the if
> (identity_mapped_irq(gsi) || !xen_initial_domain()) that avoid calling
> find_unbound_irq.
Right, and we end up using an the pirq/gsi number at that point. This
patch would not touch that logic.
> In any case I still think that it is a good idea to try to avoid the problem.
>
> In order to solve this issue you can:
>
> - add a static offset to get_nr_hw_irqs in case of pv domains;
>
> - use the patch "xen: get the maximum number of pirqs from
> xen" [1] to get the highest possible pirq number from xen so that we can be
> sure we are using an allowed value;
>
> - if the xen interface allows it, disjoin the concept of pirq from the
> concept of linux irq; then you can let xen choose any pirq number it
> wants (see my patch "xen: support pirq != irq" [2] and how you can exploit
> it in the patch "xen: implement xen_hvm_register_pirq" [3]).
> Of course this doesn't help if it must be linux the one that chooses the
> pirq number.
All of those deal with PCI devices. This patch is intended for the bug
where we want to deal with event channels and we don't want them to
usurp the irq_desc that are above NR_IRQs and where we get a PCI device for
which its IRQ falls within what info_for_irq(irq) would return: IRQT_VIRQ or
IRQT_IPI or IRQT_EVTCHN.
In other words, avoid colliding with event channels b/c those are allocated
earlier than the PCI devices.
FYI, the reason this is not triggered under HVM is that it has an IOAPIC.
But under PV no such beast. Here is an output from /proc/interrupts:
A) HVM guest (2.6.36-rc6 w/ PCI passthrough):
CPU0 CPU1
0: 191 0 IO-APIC-edge timer
1: 4 3 IO-APIC-edge i8042
4: 46 25 IO-APIC-edge serial
8: 0 1 IO-APIC-edge rtc0
9: 0 0 IO-APIC-fasteoi acpi
12: 54 45 IO-APIC-edge i8042
14: 0 0 IO-APIC-edge ata_piix
15: 20 17 IO-APIC-edge ata_piix
16: 10670 0 xen-percpu-virq timer0
17: 0 9252 xen-percpu-virq timer1
18: 138 0 xen-dyn-event xenbus
19: 0 0 IO-APIC-fasteoi uhci_hcd:usb4
21: 0 0 IO-APIC-fasteoi ehci_hcd:usb1
40: 0 0 IO-APIC-fasteoi uhci_hcd:usb2
45: 0 0 IO-APIC-fasteoi uhci_hcd:usb3
64: 30 31 PCI-MSI-edge eth1
..snip..
B) PV guest (2.6.36-rc6 w/ PCI passthrough)
CPU0 CPU1 CPU2 CPU3
0: 1760 0 0 0 xen-percpu-virq timer0
1: 2 0 0 0 xen-percpu-ipi spinlock0
2: 2481 0 0 0 xen-percpu-ipi resched0
3: 23 0 0 0 xen-percpu-ipi callfunc0
4: 0 0 0 0 xen-percpu-virq debug0
5: 94 0 0 0 xen-percpu-ipi
callfuncsingle0
6: 0 3474 0 0 xen-percpu-virq timer1
..snip..
C) PV guest (2.6.36-rc6 devel/xen-pcifront-0.8 with PCI devices.):
18: 0 0 0 0 xen-pirq-pcifront
uhci_hcd:usb4
19: 0 0 0 0 xen-pirq-pcifront
uhci_hcd:usb3
23: 0 0 0 0 xen-pirq-pcifront
ehci_hcd:usb1, uhci_hcd:usb2
103: 38 0 0 0 xen-pirq-pcifront-msi eth1
276: 24 0 0 0 xen-dyn-event eth0
277: 188 0 0 0 xen-dyn-event hvc_console
278: 69 0 0 0 xen-dyn-event pcifront
279: 259 0 0 0 xen-dyn-event xenbus
280: 0 0 0 101 xen-percpu-ipi
callfuncsingle3
... snip..
D) HVM 2.6.36-rc6 (devel/xen-pcifront-0.8)
0: 223 0 IO-APIC-edge timer
1: 3 4 IO-APIC-edge i8042
4: 44 53 IO-APIC-edge serial
8: 0 1 IO-APIC-edge rtc0
9: 0 0 IO-APIC-fasteoi acpi
12: 47 50 IO-APIC-edge i8042
14: 0 0 IO-APIC-edge ata_piix
15: 17 20 IO-APIC-edge ata_piix
19: 0 0 IO-APIC-fasteoi uhci_hcd:usb4
21: 0 0 IO-APIC-fasteoi ehci_hcd:usb1
40: 0 0 IO-APIC-fasteoi uhci_hcd:usb2
45: 0 0 IO-APIC-fasteoi uhci_hcd:usb3
64: 30 30 PCI-MSI-edge eth1
1149: 137 0 xen-dyn-event xenbus
1150: 0 8920 xen-percpu-virq timer1
1151: 11156 0 xen-percpu-virq timer0
..snip..
As you can see from B), the IRQs would be allocated from the start and inhibit
PCI devices from using them.
A) and D) show just the different off what this patch does.
>
> Feel free to pick up any of the patches I sent as part of the "PV on
> HVM: receive interrupts as xen events" series.
>
>
> References:
> [1] http://lkml.org/lkml/2010/8/30/177
> [2] http://lkml.org/lkml/2010/8/30/171
> [3] http://lkml.org/lkml/2010/8/30/172
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
|
|
| |
|
Home