I checked out these options, following result
>>> - acpi=ht noapic => worked
>>> - noapic => didn't work, disk errors while booting, no
>>> functional system
>>> - acpi=ht apic=debug => worked
>>>
>>> So it seems i definitly need the option acpi=ht or acpi=off or something
>>> like that.
>>>
>> Keir, Jeremy: Any idea why acpi=ht is needed to make Intel DQ45CB (Q45
>> chipset) work?
>>
>> Without "acpi=ht" the system freezes randomly without any
>> log/debug/serialconsole output..
> At a random guess, there's something strange about the SCI interrupt.
> When booting native, does "acpi" get irq 9 or something else? Is there
> a BIOS setting relating to SCI or ACPI interrupts?
>
The kernel was running native without that problems, i attached dmesg. I
didn't find any BIOS options like that.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32.19 (root@jupiter) (gcc version 4.4.3
(Ubuntu 4.4.3-4ubuntu5) ) #2 SMP Mon Aug 16 15:43:54 CEST 2010
[ 0.000000] Command line: root=/dev/md0 ro quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cbb77000 (usable)
[ 0.000000] BIOS-e820: 00000000cbb77000 - 00000000cbbfa000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cbbfa000 - 00000000cbd28000 (reserved)
[ 0.000000] BIOS-e820: 00000000cbd28000 - 00000000cbd3c000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cbd3c000 - 00000000cbe43000 (reserved)
[ 0.000000] BIOS-e820: 00000000cbe43000 - 00000000cbe4b000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cbe4b000 - 00000000cbe66000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cbe66000 - 00000000cbe88000 (reserved)
[ 0.000000] BIOS-e820: 00000000cbe88000 - 00000000cbe8e000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cbe8e000 - 00000000cc000000 (usable)
[ 0.000000] BIOS-e820: 00000000cdc00000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000022c000000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x22c000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FC0000000 write-back
[ 0.000000] 2 base 0CC000000 mask FFC000000 uncachable
[ 0.000000] 3 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 5 base 22C000000 mask FFC000000 uncachable
[ 0.000000] 6 base 230000000 mask FF0000000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] e820 update range: 00000000cc000000 - 0000000100000000
(usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcc000 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cc000000
[ 0.000000] 0000000000 - 00cc000000 page 2M
[ 0.000000] kernel direct mapping tables up to cc000000 @ 8000-d000
[ 0.000000] init_memory_mapping: 0000000100000000-000000022c000000
[ 0.000000] 0100000000 - 022c000000 page 2M
[ 0.000000] kernel direct mapping tables up to 22c000000 @ b000-15000
[ 0.000000] RAMDISK: 3779a000 - 37fefed1
[ 0.000000] ACPI: RSDP 00000000000f03c0 00024 (v02 INTEL)
[ 0.000000] ACPI: XSDT 00000000cbe49e18 00064 (v01 INTEL DQ45CB
0000007B MSFT 00010013)
[ 0.000000] ACPI: FACP 00000000cbe48d98 000F4 (v04 INTEL A M I
06222004 MSFT 00010013)
[ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two
FACS tables! (20090903/tbfadt-369)
[ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT -
CBE4CF40/00000000CBE51F40, using 32 (20090903/tbfadt-486)
[ 0.000000] ACPI: DSDT 00000000cbe43018 04B53 (v01 INTEL DQ45CB
0000007B INTL 20051117)
[ 0.000000] ACPI: FACS 00000000cbe4cf40 00040
[ 0.000000] ACPI: APIC 00000000cbe48f18 0006C (v02 INTEL DQ45CB
0000007B MSFT 00010013)
[ 0.000000] ACPI: MCFG 00000000cbe53e18 0003C (v01 INTEL DQ45CB
0000007B MSFT 00000097)
[ 0.000000] ACPI: ASF! 00000000cbe52d18 000A0 (v32 INTEL DQ45CB
0000007B TFSM 000F4240)
[ 0.000000] ACPI: HPET 00000000cbe53d98 00038 (v01 INTEL DQ45CB
0000007B AMI. 00000003)
[ 0.000000] ACPI: SPCR 00000000cbe53d18 00050 (v01 INTEL DQ45CB
0000007B AMI. 00000003)
[ 0.000000] ACPI: TCPA 00000000cbe53c98 00032 (v02 INTEL DQ45CB
0000007B MSFT 01000013)
[ 0.000000] ACPI: DMAR 00000000cbbf9d98 00108 (v01 INTEL DQ45CB
0000007B INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000022c000000
[ 0.000000] Bootmem setup node 0 0000000000000000-000000022c000000
[ 0.000000] NODE_DATA [0000000000010000 - 0000000000017fff]
[ 0.000000] bootmap [0000000000018000 - 000000000005d7ff] pages 46
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 022c000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==>
[0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001680514] TEXT DATA BSS ==>
[0001000000 - 0001680514]
[ 0.000000] #3 [003779a000 - 0037fefed1] RAMDISK ==>
[003779a000 - 0037fefed1]
[ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved ==>
[000009ec00 - 0000100000]
[ 0.000000] #5 [0001681000 - 00016811a8] BRK ==>
[0001681000 - 00016811a8]
[ 0.000000] #6 [0000008000 - 000000b000] PGTABLE ==>
[0000008000 - 000000b000]
[ 0.000000] #7 [000000b000 - 0000010000] PGTABLE ==>
[000000b000 - 0000010000]
[ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD ->
[ffff880001800000-ffff8800089fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0022c000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000cbb77
[ 0.000000] 0: 0x000cbe8e -> 0x000cc000
[ 0.000000] 0: 0x00100000 -> 0x0022c000
[ 0.000000] On node 0 totalpages: 2063495
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 108 pages reserved
[ 0.000000] DMA zone: 3834 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 816417 pages, LIFO batch:31
[ 0.000000] Normal zone: 16800 pages used for memmap
[ 0.000000] Normal zone: 1212000 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009e000 -
000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 -
0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cbb77000 -
00000000cbbfa000
[ 0.000000] PM: Registered nosave memory: 00000000cbbfa000 -
00000000cbd28000
[ 0.000000] PM: Registered nosave memory: 00000000cbd28000 -
00000000cbd3c000
[ 0.000000] PM: Registered nosave memory: 00000000cbd3c000 -
00000000cbe43000
[ 0.000000] PM: Registered nosave memory: 00000000cbe43000 -
00000000cbe4b000
[ 0.000000] PM: Registered nosave memory: 00000000cbe4b000 -
00000000cbe66000
[ 0.000000] PM: Registered nosave memory: 00000000cbe66000 -
00000000cbe88000
[ 0.000000] PM: Registered nosave memory: 00000000cbe88000 -
00000000cbe8e000
[ 0.000000] PM: Registered nosave memory: 00000000cc000000 -
00000000cdc00000
[ 0.000000] PM: Registered nosave memory: 00000000cdc00000 -
00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 -
00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 -
00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 -
00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 -
0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap:
d0000000:2ed1c000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880008c00000 s90008
r8192 d20584 u524288
[ 0.000000] pcpu-alloc: s90008 r8192 d20584 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 2032251
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/md0 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8055172k/9109504k available (3115k kernel code,
855524k absent, 198808k reserved, 1859k data, 592k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0,
CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] alloc irq_desc for 24 on node 0
[ 0.000000] alloc kstat_irqs on node 0
[ 0.000000] alloc irq_desc for 25 on node 0
[ 0.000000] alloc kstat_irqs on node 0
[ 0.000000] alloc irq_desc for 26 on node 0
[ 0.000000] alloc kstat_irqs on node 0
[ 0.000000] alloc irq_desc for 27 on node 0
[ 0.000000] alloc kstat_irqs on node 0
[ 0.000000] HPET: 8 timers in total, 4 timers will be used for
per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2933.058 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using
timer frequency.. 5866.11 BogoMIPS (lpj=11732232)
[ 0.004021] Security Framework initialized
[ 0.004026] SELinux: Disabled at boot.
[ 0.004492] Dentry cache hash table entries: 1048576 (order: 11,
8388608 bytes)
[ 0.010819] Inode-cache hash table entries: 524288 (order: 10,
4194304 bytes)
[ 0.012409] Mount-cache hash table entries: 256
[ 0.012534] Initializing cgroup subsys ns
[ 0.012538] Initializing cgroup subsys cpuacct
[ 0.012540] Initializing cgroup subsys devices
[ 0.012542] Initializing cgroup subsys freezer
[ 0.012543] Initializing cgroup subsys net_cls
[ 0.012562] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.012563] CPU: L2 cache: 2048K
[ 0.012566] CPU 0/0x0 -> Node 0
[ 0.012568] CPU: Physical Processor ID: 0
[ 0.012569] CPU: Processor Core ID: 0
[ 0.012571] mce: CPU supports 6 MCE banks
[ 0.012577] CPU0: Thermal monitoring enabled (TM2)
[ 0.012580] using mwait in idle threads.
[ 0.012582] Performance Events: Core2 events, Intel PMU driver.
[ 0.012586] ... version: 2
[ 0.012587] ... bit width: 40
[ 0.012588] ... generic registers: 2
[ 0.012589] ... value mask: 000000ffffffffff
[ 0.012591] ... max period: 000000007fffffff
[ 0.012592] ... fixed-purpose events: 3
[ 0.012593] ... event mask: 0000000700000003
[ 0.013398] ACPI: Core revision 20090903
[ 0.020038] DMAR: Host address width 36
[ 0.020040] DMAR: DRHD base: 0x000000fed91000 flags: 0x0
[ 0.020045] IOMMU fed91000: ver 1:0 cap c0000020630272 ecap 1000
[ 0.020047] DMAR: DRHD base: 0x000000fed92000 flags: 0x0
[ 0.020052] IOMMU fed92000: ver 1:0 cap c0000020630272 ecap 1000
[ 0.020054] DMAR: DRHD base: 0x000000fed93000 flags: 0x1
[ 0.020057] IOMMU fed93000: ver 1:0 cap c9008020630272 ecap 1000
[ 0.020059] DMAR: RMRR base: 0x000000cbe27000 end: 0x000000cbe3bfff
[ 0.020062] DMAR: RMRR base: 0x000000cdc00000 end: 0x000000cfffffff
[ 0.020063] DMAR: No ATSR found
[ 0.020071] Setting APIC routing to flat
[ 0.020392] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.060076] CPU0: Intel Pentium(R) Dual-Core CPU E6500 @
2.93GHz stepping 0a
[ 0.064001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 2048K
[ 0.008000] CPU 1/0x1 -> Node 0
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring enabled (TM2)
[ 0.148055] CPU1: Intel Pentium(R) Dual-Core CPU E6500 @
2.93GHz stepping 0a
[ 0.148061] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.152015] Brought up 2 CPUs
[ 0.152017] Total of 2 processors activated (11732.86 BogoMIPS).
[ 0.152402] CPU0 attaching sched-domain:
[ 0.152405] domain 0: span 0-1 level MC
[ 0.152407] groups: 0 1
[ 0.152412] CPU1 attaching sched-domain:
[ 0.152413] domain 0: span 0-1 level MC
[ 0.152414] groups: 1 0
[ 0.152482] devtmpfs: initialized
[ 0.154350] regulator: core version 0.5
[ 0.154350] NET: Registered protocol family 16
[ 0.154350] ACPI: bus type pci registered
[ 0.154350] PCI: MCFG configuration 0: base f0000000 segment 0 buses
0 - 127
[ 0.154350] PCI: Not using MMCONFIG.
[ 0.154350] PCI: Using configuration type 1 for base access
[ 0.154350] bio: create slab <bio-0> at 0
[ 0.156151] ACPI: EC: Look up EC in DSDT
[ 0.157316] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.159726] ACPI: BIOS _OSI(Linux) query ignored
[ 0.161138] ACPI: Interpreter enabled
[ 0.161140] ACPI: (supports S0 S3 S4 S5)
[ 0.161154] ACPI: Using IOAPIC for interrupt routing
[ 0.161253] PCI: MCFG configuration 0: base f0000000 segment 0 buses
0 - 127
[ 0.161308] PCI: MCFG area at f0000000 reserved in ACPI motherboard
resources
[ 0.165761] PCI: Using MMCONFIG at f0000000 - f7ffffff
[ 0.170381] ACPI: No dock devices found.
[ 0.170564] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.170626] pci 0000:00:02.0: reg 10 64bit mmio: [0xe0000000-0xe03fffff]
[ 0.170631] pci 0000:00:02.0: reg 18 64bit mmio pref:
[0xd0000000-0xdfffffff]
[ 0.170634] pci 0000:00:02.0: reg 20 io port: [0xf220-0xf227]
[ 0.170658] pci 0000:00:02.1: reg 10 64bit mmio: [0xe0400000-0xe04fffff]
[ 0.170713] pci 0000:00:03.0: reg 10 64bit mmio: [0xe0525000-0xe052500f]
[ 0.170761] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.170765] pci 0000:00:03.0: PME# disabled
[ 0.170789] pci 0000:00:03.2: reg 10 io port: [0xf210-0xf217]
[ 0.170792] pci 0000:00:03.2: reg 14 io port: [0xf200-0xf203]
[ 0.170796] pci 0000:00:03.2: reg 18 io port: [0xf1f0-0xf1f7]
[ 0.170799] pci 0000:00:03.2: reg 1c io port: [0xf1e0-0xf1e3]
[ 0.170802] pci 0000:00:03.2: reg 20 io port: [0xf1d0-0xf1df]
[ 0.170844] pci 0000:00:03.3: reg 10 io port: [0xf1c0-0xf1c7]
[ 0.170848] pci 0000:00:03.3: reg 14 32bit mmio: [0xe0524000-0xe0524fff]
[ 0.170923] pci 0000:00:19.0: reg 10 32bit mmio: [0xe0500000-0xe051ffff]
[ 0.170928] pci 0000:00:19.0: reg 14 32bit mmio: [0xe0523000-0xe0523fff]
[ 0.170933] pci 0000:00:19.0: reg 18 io port: [0xf0e0-0xf0ff]
[ 0.170964] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.170967] pci 0000:00:19.0: PME# disabled
[ 0.171008] pci 0000:00:1a.0: reg 20 io port: [0xf0c0-0xf0df]
[ 0.171064] pci 0000:00:1a.1: reg 20 io port: [0xf0a0-0xf0bf]
[ 0.171122] pci 0000:00:1a.2: reg 20 io port: [0xf080-0xf09f]
[ 0.171182] pci 0000:00:1a.7: reg 10 32bit mmio: [0xe0522000-0xe05223ff]
[ 0.171227] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.171231] pci 0000:00:1a.7: PME# disabled
[ 0.171275] pci 0000:00:1d.0: reg 20 io port: [0xf060-0xf07f]
[ 0.171332] pci 0000:00:1d.1: reg 20 io port: [0xf040-0xf05f]
[ 0.171390] pci 0000:00:1d.2: reg 20 io port: [0xf020-0xf03f]
[ 0.171451] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe0521000-0xe05213ff]
[ 0.171496] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.171500] pci 0000:00:1d.7: PME# disabled
[ 0.171643] pci 0000:00:1f.2: reg 10 io port: [0xf1b0-0xf1b7]
[ 0.171648] pci 0000:00:1f.2: reg 14 io port: [0xf1a0-0xf1a3]
[ 0.171652] pci 0000:00:1f.2: reg 18 io port: [0xf190-0xf197]
[ 0.171657] pci 0000:00:1f.2: reg 1c io port: [0xf180-0xf183]
[ 0.171661] pci 0000:00:1f.2: reg 20 io port: [0xf170-0xf17f]
[ 0.171665] pci 0000:00:1f.2: reg 24 io port: [0xf160-0xf16f]
[ 0.171703] pci 0000:00:1f.3: reg 10 64bit mmio: [0xe0520000-0xe05200ff]
[ 0.171714] pci 0000:00:1f.3: reg 20 io port: [0xf000-0xf01f]
[ 0.171750] pci 0000:00:1f.5: reg 10 io port: [0xf150-0xf157]
[ 0.171754] pci 0000:00:1f.5: reg 14 io port: [0xf140-0xf143]
[ 0.171758] pci 0000:00:1f.5: reg 18 io port: [0xf130-0xf137]
[ 0.171763] pci 0000:00:1f.5: reg 1c io port: [0xf120-0xf123]
[ 0.171767] pci 0000:00:1f.5: reg 20 io port: [0xf110-0xf11f]
[ 0.171772] pci 0000:00:1f.5: reg 24 io port: [0xf100-0xf10f]
[ 0.171835] pci 0000:00:1e.0: transparent bridge
[ 0.171848] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.171953] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.178034] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12
14 15)
[ 0.178107] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12
14 15)
[ 0.178180] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12
14 15)
[ 0.178251] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12
14 15)
[ 0.178324] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12
14 15)
[ 0.178396] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12
14 15)
[ 0.178469] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12
14 15) *0
[ 0.178541] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12
14 15)
[ 0.178621] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.178629] vgaarb: loaded
[ 0.178651] PCI: Using ACPI for IRQ routing
[ 0.178651] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 0, 0
[ 0.178651] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.184018] hpet: hpet2 irq 24 for MSI
[ 0.184023] hpet: hpet3 irq 25 for MSI
[ 0.184032] Switching to clocksource tsc
[ 0.184910] pnp: PnP ACPI init
[ 0.184917] ACPI: bus type pnp registered
[ 0.186635] pnp: PnP ACPI: found 11 devices
[ 0.186637] ACPI: ACPI bus type pnp unregistered
[ 0.186644] system 00:01: iomem range 0xfed14000-0xfed19fff has been
reserved
[ 0.186646] system 00:01: iomem range 0xfed08000-0xfed08fff has been
reserved
[ 0.186648] system 00:01: iomem range 0xf0000000-0xf7ffffff has been
reserved
[ 0.186652] system 00:02: ioport range 0xa20-0xa3f has been reserved
[ 0.186654] system 00:02: ioport range 0xa00-0xa1f has been reserved
[ 0.186656] system 00:02: ioport range 0xb78-0xb7f has been reserved
[ 0.186658] system 00:02: ioport range 0xf78-0xf7f has been reserved
[ 0.186662] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.186666] system 00:09: ioport range 0x400-0x47f has been reserved
[ 0.186668] system 00:09: ioport range 0x1180-0x119f has been reserved
[ 0.186670] system 00:09: ioport range 0x500-0x57f has been reserved
[ 0.186672] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been
reserved
[ 0.186674] system 00:09: iomem range 0xfec00000-0xfecfffff could not
be reserved
[ 0.186676] system 00:09: iomem range 0xfee00000-0xfee0ffff has been
reserved
[ 0.186678] system 00:09: iomem range 0xfed20000-0xfed3ffff has been
reserved
[ 0.186680] system 00:09: iomem range 0xfed45000-0xfed9ffff has been
reserved
[ 0.186682] system 00:09: iomem range 0xff000000-0xffffffff has been
reserved
[ 0.191380] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[ 0.191381] pci 0000:00:1e.0: IO window: disabled
[ 0.191385] pci 0000:00:1e.0: MEM window: disabled
[ 0.191388] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.191397] pci 0000:00:1e.0: setting latency timer to 64
[ 0.191400] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.191402] pci_bus 0000:00: resource 1 mem:
[0x000000-0xffffffffffffffff]
[ 0.191404] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.191406] pci_bus 0000:01: resource 4 mem:
[0x000000-0xffffffffffffffff]
[ 0.191429] NET: Registered protocol family 2
[ 0.191604] IP route cache hash table entries: 262144 (order: 9,
2097152 bytes)
[ 0.192783] TCP established hash table entries: 524288 (order: 11,
8388608 bytes)
[ 0.195906] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.196317] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.196320] TCP reno registered
[ 0.196426] NET: Registered protocol family 1
[ 0.196449] pci 0000:00:02.0: Boot video device
[ 1.796014] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?)
01010001
[ 3.396014] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?)
01010001
[ 3.396188] Unpacking initramfs...
[ 3.535334] Freeing initrd memory: 8535k freed
[ 3.538245] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 3.538250] DMA: Placing 64MB software IO TLB between
ffff880008d9d000 - ffff88000cd9d000
[ 3.538251] DMA: software IO TLB at phys 0x8d9d000 - 0xcd9d000
[ 3.538560] audit: initializing netlink socket (disabled)
[ 3.538571] type=2000 audit(1282670447.536:1): initialized
[ 3.539129] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.540167] VFS: Disk quotas dquot_6.5.2
[ 3.540206] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.540266] msgmni has been set to 15749
[ 3.540397] alg: No test for stdrng (krng)
[ 3.540431] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 3.540434] io scheduler noop registered
[ 3.540435] io scheduler anticipatory registered
[ 3.540437] io scheduler deadline registered
[ 3.540458] io scheduler cfq registered (default)
[ 3.541519] Linux agpgart interface v0.103
[ 3.541532] agpgart-intel 0000:00:00.0: Intel Q45/Q43 Chipset
[ 3.542076] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
[ 3.558107] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 3.558143] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.558236] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.558460] 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.558547] alloc irq_desc for 17 on node -1
[ 3.558549] alloc kstat_irqs on node -1
[ 3.558555] serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) ->
IRQ 17
[ 3.558602] 0000:00:03.3: ttyS1 at I/O 0xf1c0 (irq = 17) is a 16550A
[ 3.558666] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[ 3.558715] PNP: No PS/2 controller found. Probing ports directly.
[ 3.563431] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.563435] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.563509] mice: PS/2 mouse device common for all mice
[ 3.563548] rtc_cmos 00:05: RTC can wake from S4
[ 3.563577] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 3.563600] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 3.563608] cpuidle: using governor ladder
[ 3.563609] cpuidle: using governor menu
[ 3.563612] No iBFT detected.
[ 3.563842] TCP cubic registered
[ 3.563934] NET: Registered protocol family 10
[ 3.564253] lo: Disabled Privacy Extensions
[ 3.564442] Mobile IPv6
[ 3.564444] NET: Registered protocol family 17
[ 3.564500] PM: Resume from disk failed.
[ 3.564511] registered taskstats version 1
[ 3.564803] rtc_cmos 00:05: setting system clock to 2010-08-24
17:20:48 UTC (1282670448)
[ 3.564838] Initalizing network drop monitor service
[ 3.564855] Freeing unused kernel memory: 592k freed
[ 3.564961] Write protecting the kernel read-only data: 4252k
[ 3.802712] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 3.802714] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 3.802758] alloc irq_desc for 20 on node -1
[ 3.802759] alloc kstat_irqs on node -1
[ 3.802767] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) ->
IRQ 20
[ 3.802775] e1000e 0000:00:19.0: setting latency timer to 64
[ 3.802861] alloc irq_desc for 28 on node -1
[ 3.802862] alloc kstat_irqs on node -1
[ 3.802871] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[ 3.804679] SCSI subsystem initialized
[ 3.814913] 0000:00:19.0: 0000:00:19.0: PHY reset is blocked due to
SOL/IDER session.
[ 3.820476] usbcore: registered new interface driver usbfs
[ 3.820496] usbcore: registered new interface driver hub
[ 3.836056] usbcore: registered new device driver usb
[ 3.931299] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.932424] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.932688] libata version 3.00 loaded.
[ 4.207590] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1)
00:1c:c0:7e:5d:23
[ 4.207592] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 4.207646] 0000:00:19.0: eth0: MAC: 8, PHY: 8, PBA No: ffffff-0ff
[ 4.207679] alloc irq_desc for 18 on node -1
[ 4.207680] alloc kstat_irqs on node -1
[ 4.207686] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 4.207716] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 4.207719] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 4.207735] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned
bus number 1
[ 4.207760] ehci_hcd 0000:00:1a.7: debug port 1
[ 4.211657] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 4.211673] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe0522000
[ 4.224017] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 4.224043] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.224047] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.224049] usb usb1: Product: EHCI Host Controller
[ 4.224052] usb usb1: Manufacturer: Linux 2.6.32.19 ehci_hcd
[ 4.224054] usb usb1: SerialNumber: 0000:00:1a.7
[ 4.224146] usb usb1: configuration #1 chosen from 1 choice
[ 4.224182] hub 1-0:1.0: USB hub found
[ 4.224190] hub 1-0:1.0: 6 ports detected
[ 4.224248] alloc irq_desc for 16 on node -1
[ 4.224249] alloc kstat_irqs on node -1
[ 4.224253] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low)
-> IRQ 16
[ 4.224260] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 4.224262] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 4.224269] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned
bus number 2
[ 4.224297] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000f0c0
[ 4.224323] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.224324] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.224326] usb usb2: Product: UHCI Host Controller
[ 4.224327] usb usb2: Manufacturer: Linux 2.6.32.19 uhci_hcd
[ 4.224328] usb usb2: SerialNumber: 0000:00:1a.0
[ 4.224367] usb usb2: configuration #1 chosen from 1 choice
[ 4.224386] hub 2-0:1.0: USB hub found
[ 4.224391] hub 2-0:1.0: 2 ports detected
[ 4.224444] alloc irq_desc for 23 on node -1
[ 4.224446] alloc kstat_irqs on node -1
[ 4.224449] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low)
-> IRQ 23
[ 4.224468] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 4.224470] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.224476] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 3
[ 4.224499] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.228383] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 4.228392] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe0521000
[ 4.244011] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 4.244029] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.244032] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.244035] usb usb3: Product: EHCI Host Controller
[ 4.244037] usb usb3: Manufacturer: Linux 2.6.32.19 ehci_hcd
[ 4.244040] usb usb3: SerialNumber: 0000:00:1d.7
[ 4.244114] usb usb3: configuration #1 chosen from 1 choice
[ 4.244147] hub 3-0:1.0: USB hub found
[ 4.244154] hub 3-0:1.0: 6 ports detected
[ 4.244214] alloc irq_desc for 21 on node -1
[ 4.244216] alloc kstat_irqs on node -1
[ 4.244219] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low)
-> IRQ 21
[ 4.244224] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 4.244226] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 4.244232] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned
bus number 4
[ 4.244258] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000f0a0
[ 4.244283] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.244284] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.244286] usb usb4: Product: UHCI Host Controller
[ 4.244287] usb usb4: Manufacturer: Linux 2.6.32.19 uhci_hcd
[ 4.244288] usb usb4: SerialNumber: 0000:00:1a.1
[ 4.244326] usb usb4: configuration #1 chosen from 1 choice
[ 4.244344] hub 4-0:1.0: USB hub found
[ 4.244348] hub 4-0:1.0: 2 ports detected
[ 4.244390] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 4.244394] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 4.244396] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 4.244401] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned
bus number 5
[ 4.244421] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000f080
[ 4.244445] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.244446] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.244448] usb usb5: Product: UHCI Host Controller
[ 4.244449] usb usb5: Manufacturer: Linux 2.6.32.19 uhci_hcd
[ 4.244450] usb usb5: SerialNumber: 0000:00:1a.2
[ 4.244488] usb usb5: configuration #1 chosen from 1 choice
[ 4.244505] hub 5-0:1.0: USB hub found
[ 4.244509] hub 5-0:1.0: 2 ports detected
[ 4.247169] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low)
-> IRQ 23
[ 4.247177] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 4.247179] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.247188] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 6
[ 4.247212] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f060
[ 4.247243] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.247245] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.247246] usb usb6: Product: UHCI Host Controller
[ 4.247248] usb usb6: Manufacturer: Linux 2.6.32.19 uhci_hcd
[ 4.247249] usb usb6: SerialNumber: 0000:00:1d.0
[ 4.247298] usb usb6: configuration #1 chosen from 1 choice
[ 4.247319] hub 6-0:1.0: USB hub found
[ 4.247324] hub 6-0:1.0: 2 ports detected
[ 4.247360] ata_piix 0000:00:1f.2: version 2.13
[ 4.247372] alloc irq_desc for 19 on node -1
[ 4.247374] alloc kstat_irqs on node -1
[ 4.247379] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[ 4.247383] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 4.247425] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 4.248110] scsi0 : ata_piix
[ 4.248622] scsi1 : ata_piix
[ 4.248664] ata1: SATA max UDMA/133 cmd 0xf1b0 ctl 0xf1a0 bmdma
0xf170 irq 19
[ 4.248668] ata2: SATA max UDMA/133 cmd 0xf190 ctl 0xf180 bmdma
0xf178 irq 19
[ 4.248693] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[ 4.248700] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 4.248703] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.248712] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 7
[ 4.248736] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f040
[ 4.248774] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.248775] usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.248777] usb usb7: Product: UHCI Host Controller
[ 4.248778] usb usb7: Manufacturer: Linux 2.6.32.19 uhci_hcd
[ 4.248780] usb usb7: SerialNumber: 0000:00:1d.1
[ 4.248835] usb usb7: configuration #1 chosen from 1 choice
[ 4.248858] hub 7-0:1.0: USB hub found
[ 4.248863] hub 7-0:1.0: 2 ports detected
[ 4.248918] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[ 4.248922] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 4.248958] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 4.249021] scsi2 : ata_piix
[ 4.249264] scsi3 : ata_piix
[ 4.249295] ata3: SATA max UDMA/133 cmd 0xf150 ctl 0xf140 bmdma
0xf110 irq 19
[ 4.249299] ata4: SATA max UDMA/133 cmd 0xf130 ctl 0xf120 bmdma
0xf118 irq 19
[ 4.249327] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 4.249332] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 4.249334] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.249341] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 8
[ 4.249366] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f020
[ 4.249394] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.249396] usb usb8: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.249397] usb usb8: Product: UHCI Host Controller
[ 4.249399] usb usb8: Manufacturer: Linux 2.6.32.19 uhci_hcd
[ 4.249400] usb usb8: SerialNumber: 0000:00:1d.2
[ 4.249444] usb usb8: configuration #1 chosen from 1 choice
[ 4.249464] hub 8-0:1.0: USB hub found
[ 4.249469] hub 8-0:1.0: 2 ports detected
[ 4.578805] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.589584] ata4: SATA link down (SStatus 0 SControl 300)
[ 5.044065] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.044077] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 5.052865] ata1.00: ATA-8: WDC WD1002FBYS-02A6B0, 03.00C06, max UDMA/133
[ 5.052869] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 5.064064] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.064076] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 5.068818] ata2.00: ATA-8: WDC WD1002FBYS-02A6B0, 03.00C06, max UDMA/133
[ 5.068821] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 5.068962] ata1.00: configured for UDMA/133
[ 5.069050] scsi 0:0:0:0: Direct-Access ATA WDC WD1002FBYS-0
03.0 PQ: 0 ANSI: 5
[ 5.076865] ata2.00: configured for UDMA/133
[ 5.076947] scsi 1:0:0:0: Direct-Access ATA WDC WD1002FBYS-0
03.0 PQ: 0 ANSI: 5
[ 5.110530] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks:
(1.00 TB/931 GiB)
[ 5.110561] sd 0:0:0:0: [sda] Write Protect is off
[ 5.110563] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.110578] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 5.110668] sda:
[ 5.110904] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks:
(1.00 TB/931 GiB)
[ 5.110932] sd 1:0:0:0: [sdb] Write Protect is off
[ 5.110934] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 5.110949] sd 1:0:0:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 5.111024] sdb: sdb1 sdb2 sdb3
[ 5.121767] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 5.136586] sda1 sda2 sda3
[ 5.136797] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.364591] md: raid1 personality registered for level 1
[ 5.368527] md: md0 stopped.
[ 5.433357] md: bind<sdb1>
[ 5.433535] md: bind<sda1>
[ 5.439319] raid1: raid set md0 active with 2 out of 2 mirrors
[ 5.439335] md0: detected capacity change from 0 to 1998585856
[ 5.439560] md: md1 stopped.
[ 5.439616] md0: unknown partition table
[ 5.474508] md: bind<sdb2>
[ 5.474684] md: bind<sda2>
[ 5.480568] raid1: raid set md1 active with 2 out of 2 mirrors
[ 5.480584] md1: detected capacity change from 0 to 17190748160
[ 5.480783] md: md2 stopped.
[ 5.480838] md1: unknown partition table
[ 5.505766] md: bind<sdb3>
[ 5.505944] md: bind<sda3>
[ 5.511814] raid1: raid set md2 active with 2 out of 2 mirrors
[ 5.511831] md2: detected capacity change from 0 to 981012578304
[ 5.511997] md2: unknown partition table
[ 5.640575] device-mapper: uevent: version 1.0.3
[ 5.640671] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01)
initialised: dm-devel@xxxxxxxxxx
[ 5.696970] kjournald starting. Commit interval 5 seconds
[ 5.696977] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.328140] udevd version 125 started
[ 6.640862] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 6.910370] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 7.047400] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 7.047409] ACPI: Sleep Button [SLPB]
[ 7.047444] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 7.047449] ACPI: Power Button [PWRB]
[ 7.047482] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 7.047484] ACPI: Power Button [PWRF]
[ 7.053221] Error: Driver 'pcspkr' is already registered, aborting...
[ 7.060596] ACPI: SSDT 00000000cbe4cc18 002CC (v01 AMI IST
00000001 MSFT 03000001)
[ 7.061008] Marking TSC unstable due to TSC halts in idle
[ 7.061079] processor LNXCPU:00: registered as cooling_device0
[ 7.061420] processor LNXCPU:01: registered as cooling_device1
[ 7.128017] Switching to clocksource hpet
[ 9.388921] EXT3 FS on md0, internal journal
[ 10.222278] loop: module loaded
[ 11.551853] kjournald starting. Commit interval 5 seconds
[ 11.552251] EXT3 FS on md1, internal journal
[ 11.552257] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.610679] kjournald starting. Commit interval 5 seconds
[ 11.610700] EXT3-fs warning: mounting fs with errors, running e2fsck
is recommended
[ 11.663177] EXT3 FS on dm-25, internal journal
[ 11.663179] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.736152] Adding 2097144k swap on /dev/mapper/vgrp1-orion.swap.
Priority:-1 extents:1 across:2097144k
[ 12.383288] Bridge firewalling registered
[ 12.462079] 802.1Q VLAN Support v1.8 Ben Greear <greearb@xxxxxxxxxxxxxxx>
[ 12.462081] All bugs added by David S. Miller <davem@xxxxxxxxxx>
[ 12.500820] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[ 12.556208] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[ 12.557125] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.559244] device eth0.100 entered promiscuous mode
[ 12.559934] device eth0 entered promiscuous mode
[ 12.561076] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: None
[ 12.562004] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 12.565799] xenbr100: port 1(eth0.100) entering learning state
[ 21.564175] xenbr100: port 1(eth0.100) entering forwarding state
[ 21.673428] device eth0.200 entered promiscuous mode
[ 21.681420] xenbr200: port 1(eth0.200) entering learning state
[ 22.880174] xenbr100: no IPv6 routers present
[ 23.368171] eth0: no IPv6 routers present
[ 23.424174] eth0.100: no IPv6 routers present
[ 30.680176] xenbr200: port 1(eth0.200) entering forwarding state
[ 32.196013] xenbr200: no IPv6 routers present
[ 32.584513] eth0.200: no IPv6 routers present
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home