Re: [Xen-devel] Freeze with 2.6.32.19 and xen-4.0.1rc5

[Bruce Edge <bruce.edge@xxxxxxxxx>]

Look for the thread titled:

domU and dom0 hung with Xen console interrupt binding showing in-flight=1

there's a patch from Kier in there that fixed a periodic hang that we was experiencing.

If you have a serial console and can use the Ctrl-A x 3 trick to get a Xen console a look at the interrupts, the "(---M)" string is the indicator that it's possibly the same problem.

-Bruce

On Sat, Aug 21, 2010 at 6:47 AM, Claus Rosenberger <claus.rosenberger@xxxxxxxxx> wrote:

 Hi,

i have big trouble with a Debian Lenny dom0 and latest kernel 2.6.32.19
with xen-4.0.1rc5. Due some reason the system freezes from time to time.
I used kernel 2.6.31.9 with xen-3.4.2 before. The machine doesn't write
anything to serial console so there are no errors or something like that.

Perhaps there is something to see from the logs ...

Hardware

Board: Intel DQ45CB
CPU: Pentium(R) Dual-Core CPU E6500 @ 2.93GHz
Memory: AENEON/Qimonda 4 x 2GB 800Mhz
Disks: WDC 1TB (2x) as software raid-1

Configuration Grub

title           Xen 4.0-amd64 / Debian GNU/Linux, kernel 2.6.32.19
root            (hd0,0)
kernel          /boot/xen-4.0-amd64.gz dom0_mem=524288 cpufreq=xen
cpuidle console=com1 com1=115200,8n1,0xf1c0,0 sync_console
module          /boot/vmlinuz-2.6.32.19 root=/dev/md0 ro console=tty0
console=hvc0
module          /boot/initrd.img-2.6.32.19

Console output while starting

(XEN) Xen version 4.0.1-rc5 (Debian 4.0.1~rc5-1) (waldi@xxxxxxxxxx) (gcc
version 4.3.2 (Debian 4.3.2-1.1) ) Sat Aug 14 21:41:28 CEST 2010
(XEN) Console output is synchronous.
(XEN) Command line: dom0_mem=524288 cpufreq=xen cpuidle console=com1
com1=115200,8n1,0xf1c0,0 sync_console
(XEN) Video information:
(XEN)  VGA is text mode 80x25, font 8x16
(XEN)  VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN)  EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN)  Found 2 MBR signatures
(XEN)  Found 2 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN)  0000000000000000 - 000000000009ec00 (usable)
(XEN)  000000000009ec00 - 00000000000a0000 (reserved)
(XEN)  00000000000e0000 - 0000000000100000 (reserved)
(XEN)  0000000000100000 - 00000000cbb77000 (usable)
(XEN)  00000000cbb77000 - 00000000cbbfa000 (ACPI NVS)
(XEN)  00000000cbbfa000 - 00000000cbd28000 (reserved)
(XEN)  00000000cbd28000 - 00000000cbd3c000 (ACPI NVS)
(XEN)  00000000cbd3c000 - 00000000cbe43000 (reserved)
(XEN)  00000000cbe43000 - 00000000cbe4b000 (ACPI data)
(XEN)  00000000cbe4b000 - 00000000cbe66000 (ACPI NVS)
(XEN)  00000000cbe66000 - 00000000cbe88000 (reserved)
(XEN)  00000000cbe88000 - 00000000cbe8e000 (ACPI NVS)
(XEN)  00000000cbe8e000 - 00000000cc000000 (usable)
(XEN)  00000000cdc00000 - 00000000d0000000 (reserved)
(XEN)  00000000fed1c000 - 00000000fed20000 (reserved)
(XEN)  00000000ff000000 - 0000000100000000 (reserved)
(XEN)  0000000100000000 - 000000022c000000 (usable)
(XEN) ACPI: RSDP 000F03C0, 0024 (r2  INTEL)
(XEN) ACPI: XSDT CBE49E18, 0064 (r1 INTEL  DQ45CB         7B MSFT    10013)
(XEN) ACPI: FACP CBE48D98, 00F4 (r4  INTEL    A M I  6222004 MSFT    10013)
(XEN) ACPI: DSDT CBE43018, 4B53 (r1 INTEL  DQ45CB         7B INTL 20051117)
(XEN) ACPI: FACS CBE51F40, 0040
(XEN) ACPI: APIC CBE48F18, 006C (r2 INTEL  DQ45CB         7B MSFT    10013)
(XEN) ACPI: MCFG CBE53E18, 003C (r1 INTEL  DQ45CB         7B MSFT       97)
(XEN) ACPI: ASF! CBE52D18, 00A0 (r32 INTEL  DQ45CB         7B TFSM    F4240)
(XEN) ACPI: HPET CBE53D98, 0038 (r1 INTEL  DQ45CB         7B AMI.        3)
(XEN) ACPI: SPCR CBE53D18, 0050 (r1 INTEL  DQ45CB         7B AMI.        3)
(XEN) ACPI: TCPA CBE53C98, 0032 (r2 INTEL  DQ45CB         7B MSFT  1000013)
(XEN) ACPI: DMAR CBBF9D98, 0108 (r1 INTEL  DQ45CB         7B INTL        1)
(XEN) System RAM: 8060MB (8253980kB)
(XEN) Domain heap initialised
(XEN) ACPI: 32/64X FACS address mismatch in FADT -
cbe4cf40/00000000cbe51f40, using 32
(XEN) Processor #0 7:7 APIC version 20
(XEN) Processor #1 7:7 APIC version 20
(XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
(XEN) Enabling APIC mode:  Flat.  Using 1 I/O APICs
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2933.515 MHz processor.
(XEN) Initing memory sharing.
(XEN) VMX: Supported advanced features:
(XEN)  - APIC MMIO access virtualisation
(XEN)  - APIC TPR shadow
(XEN)  - Virtual NMI
(XEN)  - MSR direct-access bitmap
(XEN) HVM: ASIDs disabled.
(XEN) HVM: VMX enabled
(XEN) xsave_init: cpu0: cntxt_max_size: 0x240 and states: 00000000:00000003
(XEN) xsave_init: using cntxt_size: 0x240 and states: 00000000:00000003
(XEN) Intel VT-d Snoop Control not supported.
(XEN) Intel VT-d DMA Passthrough not supported.
(XEN) Intel VT-d Queued Invalidation not supported.
(XEN) Intel VT-d Interrupt Remapping not supported.
(XEN) I/O virtualisation enabled
(XEN)  - Dom0 mode: Relaxed
(XEN) xsave_init: cpu1: cntxt_max_size: 0x240 and states: 00000000:00000003
(XEN) Total of 2 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN)  -> Using new ACK method
(XEN) checking TSC synchronization across 2 CPUs: passed.
(XEN) Platform timer is 14.318MHz HPET
(XEN) Allocated console ring of 16 KiB.
(XEN) Brought up 2 CPUs
(XEN) *** LOADING DOMAIN 0 ***
(XEN)  Xen  kernel: 64-bit, lsb, compat32
(XEN)  Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x16a1000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN)  Dom0 alloc.:   0000000220000000->0000000224000000 (114688 pages
to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN)  Loaded kernel: ffffffff81000000->ffffffff816a1000
(XEN)  Init. ramdisk: ffffffff816a1000->ffffffff82de2e00
(XEN)  Phys-Mach map: ffffffff82de3000->ffffffff82ee3000
(XEN)  Start info:    ffffffff82ee3000->ffffffff82ee34b4
(XEN)  Page tables:   ffffffff82ee4000->ffffffff82eff000
(XEN)  Boot stack:    ffffffff82eff000->ffffffff82f00000
(XEN)  TOTAL:         ffffffff80000000->ffffffff83000000
(XEN)  ENTRY ADDRESS: ffffffff814f3200
(XEN) Dom0 has maximum 2 VCPUs
(XEN) Scrubbing Free RAM:
..........................................................................done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: Errors and warnings
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) **********************************************
(XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS
(XEN) ******* This option is intended to aid debugging of Xen by ensuring
(XEN) ******* that all output is synchronously delivered on the serial line.
(XEN) ******* However it can introduce SIGNIFICANT latencies and affect
(XEN) ******* timekeeping. It is NOT recommended for production use!
(XEN) **********************************************
(XEN) 3... 2... 1...
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
input to Xen)
(XEN) Freed 180kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32.19 (root@jupiter) (gcc version 4.4.3
(Ubuntu 4.4.3-4ubuntu5) ) #2 SMP Mon Aug 16 15:43:54 CEST 2010
[    0.000000] Command line: root=/dev/md0 ro console=tty0 console=hvc0
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] released 0 pages of unused memory
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  Xen: 0000000000000000 - 000000000009ec00 (usable)
[    0.000000]  Xen: 000000000009ec00 - 0000000000100000 (reserved)
[    0.000000]  Xen: 0000000000100000 - 0000000020000000 (usable)
[    0.000000]  Xen: 00000000cbb77000 - 00000000cbbfa000 (ACPI NVS)
[    0.000000]  Xen: 00000000cbbfa000 - 00000000cbd28000 (reserved)
[    0.000000]  Xen: 00000000cbd28000 - 00000000cbd3c000 (ACPI NVS)
[    0.000000]  Xen: 00000000cbd3c000 - 00000000cbe43000 (reserved)
[    0.000000]  Xen: 00000000cbe43000 - 00000000cbe4b000 (ACPI data)
[    0.000000]  Xen: 00000000cbe4b000 - 00000000cbe66000 (ACPI NVS)
[    0.000000]  Xen: 00000000cbe66000 - 00000000cbe88000 (reserved)
[    0.000000]  Xen: 00000000cbe88000 - 00000000cbe8e000 (ACPI NVS)
[    0.000000]  Xen: 00000000cdc00000 - 00000000d0000000 (reserved)
[    0.000000]  Xen: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  Xen: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  Xen: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  Xen: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.4 present.
[    0.000000] last_pfn = 0x20000 max_arch_pfn = 0x400000000
[    0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new
0x7010600070106
[    0.000000] init_memory_mapping: 0000000000000000-0000000020000000
[    0.000000] RAMDISK: 016a1000 - 02de2e00
[    0.000000] ACPI: RSDP 00000000000f03c0 00024 (v02  INTEL)
[    0.000000] ACPI: XSDT 00000000cbe49e18 00064 (v01 INTEL  DQ45CB
0000007B MSFT 00010013)
[    0.000000] ACPI: FACP 00000000cbe48d98 000F4 (v04  INTEL    A M I
06222004 MSFT 00010013)
[    0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two
FACS tables! (20090903/tbfadt-369)
[    0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT -
CBE4CF40/00000000CBE51F40, using 32 (20090903/tbfadt-486)
[    0.000000] ACPI: DSDT 00000000cbe43018 04B53 (v01 INTEL  DQ45CB
0000007B INTL 20051117)
[    0.000000] ACPI: FACS 00000000cbe4cf40 00040
[    0.000000] ACPI: APIC 00000000cbe48f18 0006C (v02 INTEL  DQ45CB
0000007B MSFT 00010013)
[    0.000000] ACPI: MCFG 00000000cbe53e18 0003C (v01 INTEL  DQ45CB
0000007B MSFT 00000097)
[    0.000000] ACPI: ASF! 00000000cbe52d18 000A0 (v32 INTEL  DQ45CB
0000007B TFSM 000F4240)
[    0.000000] ACPI: HPET 00000000cbe53d98 00038 (v01 INTEL  DQ45CB
0000007B AMI. 00000003)
[    0.000000] ACPI: SPCR 00000000cbe53d18 00050 (v01 INTEL  DQ45CB
0000007B AMI. 00000003)
[    0.000000] ACPI: TCPA 00000000cbe53c98 00032 (v02 INTEL  DQ45CB
0000007B MSFT 01000013)
[    0.000000] ACPI:      00000000cbbf9d98 00108 (v01 INTEL  DQ45CB
0000007B INTL 00000001)
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000020000000
[    0.000000] Bootmem setup node 0 0000000000000000-0000000020000000
[    0.000000]   NODE_DATA [0000000000008000 - 000000000000ffff]
[    0.000000]   bootmap [0000000000010000 -  0000000000013fff] pages 4
[    0.000000] (8 early reservations) ==> bootmem [0000000000 - 0020000000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==>
[0000000000 - 0000001000]
[    0.000000]   #1 [0002ee4000 - 0002eff000]   XEN PAGETABLES ==>
[0002ee4000 - 0002eff000]
[    0.000000]   #2 [0000006000 - 0000008000]       TRAMPOLINE ==>
[0000006000 - 0000008000]
[    0.000000]   #3 [0001000000 - 0001680514]    TEXT DATA BSS ==>
[0001000000 - 0001680514]
[    0.000000]   #4 [00016a1000 - 0002de2e00]          RAMDISK ==>
[00016a1000 - 0002de2e00]
[    0.000000]   #5 [0002de3000 - 0002ee4000]   XEN START INFO ==>
[0002de3000 - 0002ee4000]
[    0.000000]   #6 [0001681000 - 00016811a8]              BRK ==>
[0001681000 - 00016811a8]
[    0.000000]   #7 [0000100000 - 00001e4000]          PGTABLE ==>
[0000100000 - 00001e4000]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00100000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x0000009e
[    0.000000]     0: 0x00000100 -> 0x00020000
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 0, address 0xfec00000, GSI 0-0
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ERROR: Unable to locate IOAPIC for GSI 2
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ERROR: Unable to locate IOAPIC for GSI 9
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: 000000000009e000 -
000000000009f000
[    0.000000] PM: Registered nosave memory: 000000000009f000 -
0000000000100000
[    0.000000] Allocating PCI resources starting at 20000000 (gap:
20000000:abb77000)
[    0.000000] Booting paravirtualized kernel on Xen
[    0.000000] Xen version: 4.0.1-rc5 (preserve-AD) (dom0)
[    0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff880002f35000 s90008
r8192 d20584 u118784
[    0.000000] pcpu-alloc: s90008 r8192 d20584 u118784 alloc=29*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Xen: using vcpu_info placement
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.
Total pages: 128951
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: root=/dev/md0 ro console=tty0
console=hvc0
[    0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] DMA: Placing 64MB software IO TLB between
ffff880003a06000 - ffff880007a06000
[    0.000000] DMA: software IO TLB at phys 0x3a06000 - 0x7a06000
[    0.000000] xen_swiotlb_fixup: buf=ffff880003a06000 size=67108864
[    0.000000] xen_swiotlb_fixup: buf=ffff880007a66000 size=32768
[    0.000000] Memory: 417688k/524288k available (3115k kernel code,
392k absent, 106208k reserved, 1859k data, 592k init)
[    0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0,
CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:4352 nr_irqs:768
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] xen: sci override: source_irq=9 global_irq=9 trigger=c
polarity=1
[    0.000000] xen_allocate_pirq: returning irq 9 for gsi 9
[    0.000000] xen: acpi sci 9
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [hvc0] enabled
[    0.000000] installing Xen timer for CPU 0
[    0.000000] Detected 2933.514 MHz processor.
[    0.004000] Calibrating delay loop (skipped), value calculated using
timer frequency.. 5867.02 BogoMIPS (lpj=11734056)
[    0.004000] Security Framework initialized
[    0.004000] SELinux:  Disabled at boot.
[    0.004077] Dentry cache hash table entries: 65536 (order: 7, 524288
bytes)
[    0.007323] Inode-cache hash table entries: 32768 (order: 6, 262144
bytes)
[    0.008000] Mount-cache hash table entries: 256
[    0.008122] Initializing cgroup subsys ns
[    0.010973] Initializing cgroup subsys cpuacct
[    0.012000] Initializing cgroup subsys devices
[    0.012000] Initializing cgroup subsys freezer
[    0.012000] Initializing cgroup subsys net_cls
[    0.012021] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.015384] CPU: L2 cache: 2048K
[    0.016005] CPU 0/0x0 -> Node 0
[    0.017322] CPU: Physical Processor ID: 0
[    0.018994] CPU: Processor Core ID: 0
[    0.020004] mce: CPU supports 6 MCE banks
[    0.021735] Performance Events: unsupported p6 CPU model 23 no PMU
driver, software events only.
[    0.024001] SMP alternatives: switching to UP code
[    0.028001] ACPI: Core revision 20090903
[    0.036233] installing Xen timer for CPU 1
[    0.038038] SMP alternatives: switching to SMP code
[    0.004000] Initializing CPU#1
[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004000] CPU: L2 cache: 2048K
[    0.004000] CPU 1/0x0 -> Node 0
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 1
[    0.040102] Brought up 2 CPUs
[    0.044036] devtmpfs: initialized
[    0.047638] Grant table initialized
[    0.047638] regulator: core version 0.5
[    0.048036] NET: Registered protocol family 16
[    0.049983] ACPI: bus type pci registered
[    0.052066] PCI: MCFG configuration 0: base f0000000 segment 0 buses
0 - 127
[    0.055071] PCI: Not using MMCONFIG.
[    0.056001] PCI: Using configuration type 1 for base access
[    0.056338] bio: create slab <bio-0> at 0
[    0.058266] ERROR: Unable to locate IOAPIC for GSI 9
[    0.062347] ACPI: Executed 1 blocks of module-level executable AML code
[    0.067833] ACPI: BIOS _OSI(Linux) query ignored
[    0.069997] ACPI: Interpreter enabled
[    0.071524] ACPI: (supports S0 S3 S4 S5)
[    0.072001] ACPI: Using IOAPIC for interrupt routing
[    0.072136] PCI: MCFG configuration 0: base f0000000 segment 0 buses
0 - 127
[    0.075207] PCI: MCFG area at f0000000 reserved in ACPI motherboard
resources
[    0.096901] PCI: Using MMCONFIG at f0000000 - f7ffffff
[    0.106375] ACPI Warning: Incorrect checksum in table [    ] - 6C,
should be B0 (20090903/tbutils-314)
[    0.108123] ACPI: No dock devices found.
[    0.110070] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.112246] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.114867] pci 0000:00:03.0: PME# disabled
[    0.116001] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.116001] pci 0000:00:19.0: PME# disabled
[    0.116172] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.118848] pci 0000:00:1a.7: PME# disabled
[    0.120001] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.120001] pci 0000:00:1d.7: PME# disabled
[    0.120330] pci 0000:00:1e.0: transparent bridge
[    0.134376] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12
14 15)
[    0.136067] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12
14 15)
[    0.139137] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12
14 15)
[    0.140066] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12
14 15)
[    0.143099] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12
14 15)
[    0.144066] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12
14 15)
[    0.147627] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12
14 15) *0
[    0.148066] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12
14 15)
[    0.151130] xen_balloon: Initialising balloon driver with page order 0.
[    0.152001] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.152001] vgaarb: loaded
[    0.152037] PCI: Using ACPI for IRQ routing
[    0.154000] Switching to clocksource xen
[    0.155719] pnp: PnP ACPI init
[    0.155719] ACPI: bus type pnp registered
[    0.157935] xen_allocate_pirq: returning irq 4 for gsi 4
[    0.160397] xen_allocate_pirq: returning irq 8 for gsi 8
[    0.162801] xen_allocate_pirq: returning irq 13 for gsi 13
[    0.166148] pnp: PnP ACPI: found 11 devices
[    0.169280] ACPI: ACPI bus type pnp unregistered
[    0.172005] system 00:01: iomem range 0xfed14000-0xfed19fff has been
reserved
[    0.175004] system 00:01: iomem range 0xfed08000-0xfed08fff has been
reserved
[    0.175998] system 00:01: iomem range 0xf0000000-0xf7ffffff has been
reserved
[    0.181522] system 00:02: ioport range 0xa20-0xa3f has been reserved
[    0.184175] system 00:02: ioport range 0xa00-0xa1f has been reserved
[    0.185514] system 00:02: ioport range 0xb78-0xb7f has been reserved
[    0.185514] system 00:02: ioport range 0xf78-0xf7f has been reserved
[    0.194410] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[    0.197653] system 00:09: ioport range 0x400-0x47f has been reserved
[    0.200838] system 00:09: ioport range 0x1180-0x119f has been reserved
[    0.201644] system 00:09: ioport range 0x500-0x57f has been reserved
[    0.201644] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been
reserved
[    0.201644] system 00:09: iomem range 0xfec00000-0xfecfffff could not
be reserved
[    0.201644] system 00:09: iomem range 0xfee00000-0xfee0ffff could not
be reserved
[    0.201644] system 00:09: iomem range 0xfed20000-0xfed3ffff has been
reserved
[    0.201644] system 00:09: iomem range 0xfed45000-0xfed9ffff has been
reserved
[    0.201644] system 00:09: iomem range 0xff000000-0xffffffff has been
reserved
[    0.233094] PM-Timer failed consistency check  (0x0xffffff) - aborting.
[    0.235880] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[    0.236003] pci 0000:00:1e.0:   IO window: disabled
[    0.236003] pci 0000:00:1e.0:   MEM window: disabled
[    0.236003] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.247720] NET: Registered protocol family 2
[    0.251172] IP route cache hash table entries: 4096 (order: 3, 32768
bytes)
[    0.254387] TCP established hash table entries: 16384 (order: 6,
262144 bytes)
[    0.258438] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.261801] TCP: Hash tables configured (established 16384 bind 16384)
[    0.262417] TCP reno registered
[    0.262417] NET: Registered protocol family 1
[    1.868021] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?)
01010001
[    3.468022] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?)
01010001
[    3.471192] Unpacking initramfs...
[    3.498686] Freeing initrd memory: 23815k freed
[    3.509374] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    3.512015] DMA: Placing 64MB software IO TLB between
ffff880003a06000 - ffff880007a06000
[    3.512015] DMA: software IO TLB at phys 0x3a06000 - 0x7a06000
[    3.520579] audit: initializing netlink socket (disabled)
[    3.522922] type=2000 audit(1282401524.555:1): initialized
[    3.526164] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    3.530194] VFS: Disk quotas dquot_6.5.2
[    3.532304] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    3.535103] msgmni has been set to 862
[    3.538435] alg: No test for stdrng (krng)
[    3.540660] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[    3.544100] io scheduler noop registered
[    3.544617] io scheduler anticipatory registered
[    3.544617] io scheduler deadline registered
[    3.550889] io scheduler cfq registered (default)
[    3.556697] registering netback
[    3.560605] hpet_acpi_add: no address or irqs in _CRS
[    3.562791] Linux agpgart interface v0.103
[    3.564558] agpgart-intel 0000:00:00.0: Intel Q45/Q43 Chipset
[    3.569724] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
(XEN) mm.c:860:d0 Error getting mfn 20000 (pfn 5555555555555555) from L1
entry 8000000020000473 for l1e_owner=0, pg_owner=32753
[    3.594370] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    3.597333] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    3.601260] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    3.604085] 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    3.607665] serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) ->
IRQ 17
[    3.610749] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[    3.614068] PNP: No PS/2 controller found. Probing ports directly.
[    3.621724] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.623845] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.626065] mice: PS/2 mouse device common for all mice
[    3.628369] rtc_cmos 00:05: RTC can wake from S4
[    3.630391] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    3.633407] rtc0: alarms up to one year, y3k, 114 bytes nvram
[    3.636446] cpuidle: using governor ladder
[    3.638160] cpuidle: using governor menu
[    3.640435] No iBFT detected.
[    3.640435] TCP cubic registered
[    3.644730] NET: Registered protocol family 10
[    3.648048] lo: Disabled Privacy Extensions
[    3.650007] Mobile IPv6
[    3.651066] NET: Registered protocol family 17
[    3.653027] registered taskstats version 1
[    3.656447] rtc_cmos 00:05: setting system clock to 2010-08-21
14:38:44 UTC (1282401524)
[    3.661024] Initalizing network drop monitor service
[    3.663301] Freeing unused kernel memory: 592k freed
[    3.666114] Write protecting the kernel read-only data: 4252k
Loading, please wait...
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... [    3.972359] SCSI subsystem
initialized
[    3.987383] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[    3.989008] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[    3.992753] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) ->
IRQ 20
[    4.007303] usbcore: registered new interface driver usbfs
[    4.009005] usbcore: registered new interface driver hub
[    4.036723] usbcore: registered new device driver usb
[    4.043306] 0000:00:19.0: 0000:00:19.0: PHY reset is blocked due to
SOL/IDER session.
[    4.129379] uhci_hcd: USB Universal Host Controller Interface driver
[    4.133854] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.136608] Warning! ehci_hcd should always be loaded before uhci_hcd
and ohci_hcd, not after
[    4.328064] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1)
00:1c:c0:7e:5d:23
[    4.332251] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[    4.337295] 0000:00:19.0: eth0: MAC: 8, PHY: 8, PBA No: ffffff-0ff
[    4.340020] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low)
-> IRQ 16
[    4.341007] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    4.346435] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned
bus number 1
[    4.352867] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000f0c0
[    4.355972] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    4.358863] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    4.363261] usb usb1: Product: UHCI Host Controller
[    4.363261] usb usb1: Manufacturer: Linux 2.6.32.19 uhci_hcd
[    4.363261] usb usb1: SerialNumber: 0000:00:1a.0
[    4.375770] usb usb1: configuration #1 chosen from 1 choice
[    4.379219] hub 1-0:1.0: USB hub found
[    4.380849] hub 1-0:1.0: 2 ports detected
[    4.383186] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[    4.386787] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    4.387075] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned
bus number 2
[    4.394149] ehci_hcd 0000:00:1a.7: debug port 1
[    4.405343] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe0522000
[    4.421028] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    4.423479] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    4.425015] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    4.425015] usb usb2: Product: EHCI Host Controller
[    4.425015] usb usb2: Manufacturer: Linux 2.6.32.19 ehci_hcd
[    4.425015] usb usb2: SerialNumber: 0000:00:1a.7
[    4.438580] usb usb2: configuration #1 chosen from 1 choice
[    4.442268] hub 2-0:1.0: USB hub found
[    4.443847] hub 2-0:1.0: 6 ports detected
[    4.445702] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low)
-> IRQ 21
[    4.448745] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    4.449657] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned
bus number 3
[    4.456263] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000f0a0
[    4.459221] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    4.463195] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    4.463195] usb usb3: Product: UHCI Host Controller
[    4.463195] usb usb3: Manufacturer: Linux 2.6.32.19 uhci_hcd
[    4.463195] usb usb3: SerialNumber: 0000:00:1a.1
[    4.474960] usb usb3: configuration #1 chosen from 1 choice
[    4.477318] hub 3-0:1.0: USB hub found
[    4.479372] hub 3-0:1.0: 2 ports detected
[    4.481215] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low)
-> IRQ 23
[    4.485177] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    4.485177] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 4
[    4.492307] ehci_hcd 0000:00:1d.7: debug port 1
[    4.498408] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe0521000
[    4.516022] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    4.518471] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    4.520005] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    4.520005] usb usb4: Product: EHCI Host Controller
[    4.520005] usb usb4: Manufacturer: Linux 2.6.32.19 ehci_hcd
[    4.520005] usb usb4: SerialNumber: 0000:00:1d.7
[    4.533521] usb usb4: configuration #1 chosen from 1 choice
[    4.536109] hub 4-0:1.0: USB hub found
[    4.538858] hub 4-0:1.0: 6 ports detected
[    4.540863] xen_allocate_pirq: returning irq 18 for gsi 18
[    4.543219] Already setup the GSI :18
[    4.544822] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[    4.547215] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    4.547215] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned
bus number 5
[    4.555876] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000f080
[    4.558604] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    4.562227] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    4.562741] usb usb5: Product: UHCI Host Controller
[    4.562741] usb usb5: Manufacturer: Linux 2.6.32.19 uhci_hcd
[    4.562741] usb usb5: SerialNumber: 0000:00:1a.2
[    4.574461] usb usb5: configuration #1 chosen from 1 choice
[    4.583596] hub 5-0:1.0: USB hub found
[    4.585254] hub 5-0:1.0: 2 ports detected
[    4.590096] xen_allocate_pirq: returning irq 23 for gsi 23
[    4.593905] Already setup the GSI :23
[    4.596050] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low)
-> IRQ 23
[    4.597901] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    4.597901] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 6
[    4.605300] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f060
[    4.608381] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    4.609260] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    4.609260] usb usb6: Product: UHCI Host Controller
[    4.609260] usb usb6: Manufacturer: Linux 2.6.32.19 uhci_hcd
[    4.609260] usb usb6: SerialNumber: 0000:00:1d.0
[    4.622973] usb usb6: configuration #1 chosen from 1 choice
[    4.625266] hub 6-0:1.0: USB hub found
[    4.627949] hub 6-0:1.0: 2 ports detected
[    4.629769] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[    4.632827] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    4.636133] scsi0 : ata_piix
[    4.637938] scsi1 : ata_piix
[    4.640604] ata1: SATA max UDMA/133 cmd 0xf1b0 ctl 0xf1a0 bmdma
0xf170 irq 19
[    4.641887] ata2: SATA max UDMA/133 cmd 0xf190 ctl 0xf180 bmdma
0xf178 irq 19
[    4.648389] xen_allocate_pirq: returning irq 19 for gsi 19
[    4.651217] Already setup the GSI :19
[    4.654481] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[    4.657412] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    4.659750] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 7
[    4.664386] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f040
[    4.666901] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    4.669782] usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    4.670874] usb usb7: Product: UHCI Host Controller
[    4.670874] usb usb7: Manufacturer: Linux 2.6.32.19 uhci_hcd
[    4.670874] usb usb7: SerialNumber: 0000:00:1d.1
[    4.681347] usb usb7: configuration #1 chosen from 1 choice
[    4.684158] hub 7-0:1.0: USB hub found
[    4.686950] hub 7-0:1.0: 2 ports detected
[    4.688855] xen_allocate_pirq: returning irq 19 for gsi 19
[    4.691239] Already setup the GSI :19
[    4.692822] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[    4.695235] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    4.700261] scsi2 : ata_piix
[    4.701808] scsi3 : ata_piix
[    4.703083] ata3: SATA max UDMA/133 cmd 0xf150 ctl 0xf140 bmdma
0xf110 irq 19
[    4.705760] ata4: SATA max UDMA/133 cmd 0xf130 ctl 0xf120 bmdma
0xf118 irq 19
[    4.709623] xen_allocate_pirq: returning irq 18 for gsi 18
[    4.712543] Already setup the GSI :18
[    4.713590] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[    4.713590] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    4.713590] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 8
[    4.724620] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f020
[    4.727127] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    4.731098] usb usb8: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    4.731098] usb usb8: Product: UHCI Host Controller
[    4.731098] usb usb8: Manufacturer: Linux 2.6.32.19 uhci_hcd
[    4.731098] usb usb8: SerialNumber: 0000:00:1d.2
[    4.743158] usb usb8: configuration #1 chosen from 1 choice
[    4.746102] hub 8-0:1.0: USB hub found
[    4.747693] hub 8-0:1.0: 2 ports detected
[    5.032006] ata4: SATA link down (SStatus 0 SControl 300)
[    5.045534] ata3: SATA link down (SStatus 0 SControl 300)
[    5.448132] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    5.450866] ata1.01: SATA link down (SStatus 0 SControl 300)
[    5.453423] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    5.456100] ata2.01: SATA link down (SStatus 0 SControl 300)
[    5.460786] ata1.00: ATA-8: WDC WD1002FBYS-02A6B0, 03.00C06, max UDMA/133
[    5.463692] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    5.468660] ata2.00: ATA-8: WDC WD1002FBYS-02A6B0, 03.00C06, max UDMA/133
[    5.472444] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    5.476816] ata1.00: configured for UDMA/133
[    5.478736] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1002FBYS-0
03.0 PQ: 0 ANSI: 5
[    5.486181] ata2.00: configured for UDMA/133
[    5.488538] scsi 1:0:0:0: Direct-Access     ATA      WDC WD1002FBYS-0
03.0 PQ: 0 ANSI: 5
[    5.541659] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks:
(1.00 TB/931 GiB)
[    5.541856] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks:
(1.00 TB/931 GiB)
[    5.541913] sd 1:0:0:0: [sdb] Write Protect is off
[    5.541944] sd 1:0:0:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[    5.542095]  sdb:
[    5.557518] sd 0:0:0:0: [sda] Write Protect is off
[    5.560217] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[    5.564739]  sda: sdb1 sdb2 sdb3
[    5.569668] sd 1:0:0:0: [sdb] Attached SCSI disk
[    5.581752]  sda1 sda2 sda3
[    5.583736] sd 0:0:0:0: [sda] Attached SCSI disk
done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top
... Begin: Loading[    5.802092] md: raid1 personality registered for
level 1
Success: loaded module raid1.
done.
Begin: Assembling all MD arrays ... [    5.818270] md: md0 stopped.
[    5.835463] md: bind<sdb1>
[    5.836855] md: bind<sda1>
[    5.844695] raid1: raid set md0 active with 2 out of 2 mirrors
[    5.847222] md0: detected capacity change from 0 to 1998585856
mdadm: /dev/md0 has been started with 2 drives.
[    5.853914] md: md1 stopped.
[    5.855767]  md0: unknown partition table
[    5.930396] md: bind<sdb2>
[    5.931826] md: bind<sda2>
[    5.940841] raid1: raid set md1 active with 2 out of 2 mirrors
[    5.943400] md1: detected capacity change from 0 to 17190748160
mdadm: /dev/md1 has been started with 2 drives.
[    5.950992] md: md2 stopped.
[    5.952353]  md1: unknown partition table
[    6.001220] md: bind<sdb3>
[    6.002725] md: bind<sda3>
[    6.010482] raid1: md2 is not clean -- starting background reconstruction
[    6.014473] raid1: raid set md2 active with 2 out of 2 mirrors
[    6.017005] md2: detected capacity change from 0 to 981012578304
mdadm: /dev/md2 has been started with 2 drives.
[    6.022926]  md2: unknown partition table
Success: assembled all arrays.
done.
Begin: Waiting for udev to process events ... done.
[    6.094176] device-mapper: uevent: version 1.0.3
[    6.097386] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01)
initialised: dm-devel@xxxxxxxxxx
done.
Begin: Running /scripts/local-premount ... done.
[    6.144313] EXT3-fs: INFO: recovery required on readonly filesystem.
[    6.147116] EXT3-fs: write access will be enabled during recovery.
[    6.266634] kjournald starting.  Commit interval 5 seconds
[    6.269039] EXT3-fs: recovery complete.
[    6.271603] EXT3-fs: mounted filesystem with ordered data mode.
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.86 booting
Starting the hotplug events dispatcher: udevd[    7.188746] udevd
version 125 started
.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...[    7.826508] input: Sleep
Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    7.828020] ACPI: Sleep Button [SLPB]
[    7.836073] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    7.839684] ACPI: Power Button [PWRB]
[    7.913777] input: PC Speaker as /devices/platform/pcspkr/input/input3
[    7.932125] xen_allocate_pirq: returning irq 18 for gsi 18
[    7.934459] Already setup the GSI :18
[    7.936031] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[    7.940447] ACPI: SSDT 00000000cbe4cc18 002CC (v01    AMI      IST
00000001 MSFT 03000001)
[    7.946355] Marking TSC unstable due to TSC halts in idle
[    7.948697] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
[    7.951686] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    7.952663] ACPI: Power Button [PWRF]
[    7.992562] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
(XEN) no cpu_id for acpi_id 3
[    7.996488] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
(XEN) no cpu_id for acpi_id 4
[    8.085694] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
(XEN) no cpu_id for acpi_id 5
[    8.135080] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
[    8.161776] Error: Driver 'pcspkr' is already registered, aborting...
(XEN) no cpu_id for acpi_id 6
[    8.186681] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
(XEN) no cpu_id for acpi_id 7
[    8.246343] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
(XEN) no cpu_id for acpi_id 8
[    8.278251] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
done.
RAID status not OK. Exiting. failed!
Setting the system clock.
Activating swap...done.
Checking root file system...fsck 1.41.3 (12-Oct-2008)
/dev/md0: clean, 36618/122160 files, 254589/487936 blocks
done.
[   10.433319] EXT3 FS on md0, internal journal
Setting the system clock.
Cleaning up ifupdown....
Loading kernel modules...[   11.343159] loop: module loaded
done.
Generating udev events for MD arrays...done.
Setting up LVM Volume Groups  Reading all physical volumes.  This may
take a while...
 Found volume group "vgrp1" using metadata type lvm2
 36 logical volume(s) in volume group "vgrp1" now active
.
Checking file systems...fsck 1.41.3 (12-Oct-2008)
/dev/md1: recovering journal
/dev/md1: clean, 1999/1050576 files, 162111/4196960 blocks
done.
Setting kernel variables (/etc/sysctl.conf)...done.
Mounting local filesystems...[   13.112515] kjournald starting.  Commit
interval 5 seconds
[   13.120490] EXT3 FS on md1, internal journal
[   13.122256] EXT3-fs: mounted filesystem with ordered data mode.
[   13.317719] md: resync of RAID array md2
[   13.319320] md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
[   13.321475] md: using maximum available idle IO bandwidth (but not
more than 200000 KB/sec) for resync.
[   13.321475] md: using 128k window, over a total of 958020096 blocks.
[   13.440405] kjournald starting.  Commit interval 5 seconds
[   13.508352] EXT3 FS on dm-25, internal journal
[   13.510329] EXT3-fs: recovery complete.
[   13.512505] EXT3-fs: mounted filesystem with ordered data mode.
done.
Activating swapfile swap...[   13.572921] Adding 2097144k swap on
/dev/mapper/vgrp1-orion.swap.  Priority:-1 extents:1 across:2097144k
done.
Setting up networking....
Configuring network interfaces...Don't seem to be have all the variables
for eth0.100/inet.
Failed to bring up eth0.100.
Don't seem to be have all the variables for eth0.200/inet.
Failed to bring up eth0.200.
[   14.171235] Bridge firewalling registered
WARNING:  Could not open /proc/net/vlan/config.  Maybe you need to load
the 8021q module, or maybe you are not using PROCFS??
[   14.230673] 802.1Q VLAN Support v1.8 Ben Greear <greearb@xxxxxxxxxxxxxxx>
[   14.232010] All bugs added by David S. Miller <davem@xxxxxxxxxx>
Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config
[   14.332471] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.336567] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: None
[   14.342030] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Added VLAN with VID == 100 to IF -:eth0:-
[   14.352613] device eth0.100 entered promiscuous mode
[   14.357464] device eth0 entered promiscuous mode
[   14.368491] xenbr100: port 1(eth0.100) entering learning state

Waiting for xenbr100 to get ready (MAXWAIT is 20 seconds).
[   23.369074] xenbr100: port 1(eth0.100) entering forwarding state
if-up.d/mountnfs[xenbr100]: waiting for interface eth0.100 before doing
NFS mounts (warning).
if-up.d/mountnfs[xenbr100]: waiting for interface eth0.200 before doing
NFS mounts (warning).
if-up.d/mountnfs[xenbr100]: waiting for interface xenbr200 before doing
NFS mounts (warning).
Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config
Added VLAN with VID == 200 to IF -:eth0:-
[   23.698451] device eth0.200 entered promiscuous mode
[   23.711535] xenbr200: port 1(eth0.200) entering learning state

Waiting for xenbr200 to get ready (MAXWAIT is 20 seconds).
[   32.712256] xenbr200: port 1(eth0.200) entering forwarding state
if-up.d/mountnfs[xenbr200]: waiting for interface eth0.100 before doing
NFS mounts (warning).
if-up.d/mountnfs[xenbr200]: waiting for interface eth0.200 before doing
NFS mounts (warning).
done.
Starting portmap daemon....
Starting NFS common utilities: statd.
Loading the saved-state of the serial devices...
/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
[   33.587386] ttyS1: LSR safety check engaged!
[   33.591292] ttyS1: LSR safety check engaged!
/dev/ttyS1 at 0xf1c0 (irq = 17) is a 16550A
Setting sensors limits.
Setting console screen modes and fonts.
INIT: Entering runlevel: 2
Starting enhanced syslogd: rsyslogd.
Starting OpenBSD Secure Shell server: sshd.
Starting MTA: exim4.
Starting NFS common utilities: statd.
Starting powernowd: required sysfs objects not found!
       Read /usr/share/doc/powernowd/README.Debian for more information.
Not starting S.M.A.R.T. daemon smartd, disabled via
/etc/default/smartmontools (warning).
Starting network management services: snmpd.
Starting Xen daemons:[   66.387718] Event-channel device installed.
 xenfs xenstored xenconsoled xend[   67.150428] XENBUS: Unable to read
cpu state

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel