On Mon, Jun 21, 2010 at 01:54:43PM -0700, ccmail111 wrote:
>
> resending...
>
> --- On Thu, 6/17/10, ccmail111 <ccmail111@xxxxxxxxx> wrote:
>
> From: ccmail111 <ccmail111@xxxxxxxxx>
> Subject: Re: [Xen-devel] boot Xen 4.0
> To: "Konrad Rzeszutek Wilk" <konrad.wilk@xxxxxxxxxx>
> Cc: deshantm@xxxxxxxxx, "yingbin wang" <yingbin.wangyb@xxxxxxxxx>,
> xen-devel@xxxxxxxxxxxxxxxxxxx
> Date: Thursday, June 17, 2010, 2:27 PM
>
> Thanks Konrad for your help. I tried your suggestion but see below:
> Please let me know next steps..
This is realy puzzling. There is nothing in the Linux source code that would
explain
why it would hang after printing the early reservations. It does not help that
your serial
output is mangled up. Lets see if we can get the serial console to print
the date properly. Try adding this in:
sync_console console_to_ring console=com1,vga
>
> grub entry:
>
>
> title Xen 4.0 debug XenLinux 2.6
> root (hd0,1)
> kernel /boot/xen-4.0.0.gz noreboot dom0_mem=max:1G loglvl=all
> com1=38400,8n1 console=com1 iommu=off guest_loglvl=all
> module /boot/vmlinuz-2.6.32.13 ro root=/dev/sda2 console=hvc0
> earlyprintk=xen nomodeset debug loglevel=10
> module /boot/initrd-2.6.32.13.img
>
>
>
> (XEN) ACPI: FACP BF7B8A88, 00F4 (r3 HPQOEM TYLSBURG 1
> 0)EN) ACPI: ACPI
> SLEEP INFO: pm1x_cnt[f804,460], pm1x_evt[f800,0]
> (XEN) ACPI: DSDT BF7B92D7, A73D (r1 COMPAQ DSDT_PRJ 1 MSFT
> 100000E) wakeup_vec[bf7b880c],
> vec_size[20]
> (XEN) ACPI: FACS BF7B8800, 0040EN) ACPI: Local APIC address 0x
> (XEN) ACPI: APIC
> BF7B8B7C, 0114 (r1 HPQOEM TYLSBURG 1 0)[0x01]
> lapic_id[0x00] enabled)
> (XEN) ACPI: ASF! BF7B8C90, 0063 (r32 HPQOEM TYLSBURG 1
> 0)
> (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
> (XEN) ACPI: MCFG BF7B8CF3, 003C (r1 HPQOEM TYLSBURG 1 0)PIC
> version 21
> (XEN) ACPI: LAPIC (ac
> (XEN) ACPI: TCPA BF7B8D2F, 0032 (r1 HPQOEM TYLSBURG 1
> 0)
> (XEN) Processor #4 7:10 APIC version 21
> (XEN) ACPI: DMAR BF7B8F0F, 01B8 (r1 HPQOEM TYLSBURG 1
> 0)
> (XEN) ACPI: LAPIC (acpi_id[0x0
> (XEN) ACPI: SSDT BF7C4EE6, 11FC (r1 INTEL PPM RCM 80000001 INTL
> 20061109)
> (XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
> (XEN) No NUMA configuration found
> (XEN) ACPI: LAPIC
> (XEN) Faking a node at
> 0000000000000000-00000000bf7a5000
>
> (XEN) ACPI: LAPI
> (XEN) Domain heap initialised] disabled)
> (XEN) found SMP MP-table at 000f9bf0
> (XEN) ACPI: LAPIC (acpi_id[0x0b]
> (XEN) DMI 2.6 present.)
> (XEN) Using APIC driver default
>
> (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02]
> enabled)
> (XEN) ACPI: LAPIC_NMI (acpi_
> (XEN) Processor #2 7:10 APIC version
> 21
> (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04]
> enabled)nt[0x1])
> (XEN) Processor #4 7:10 APIC version 21[0x04] high edge lint[
> (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)MI (acpi_id[0x07]
> high edge lint[0x1])
> (XEN) ACPI:
> LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)MI (acpi_id[0x08] high edge
> lint[0x1])
> (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)(id[0x01]
> address[0xfec00000] gsi_base[0])
> (XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)C[0]: apic_id 1,
> version 32, address 0xfec00000, GSI 0-23
> (XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x00] disabled)
> (XEN) ACPI: IOAPIC (id[0x02] address[0xfec1000
> (XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x00] disabled)
> (XEN) IOAPIC[1]: apic_id 2, version
> (XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x00]
> disabled)
>
> (XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x00] disabled)NT_SRC_OVR (bus 0
> bus_irq 9 global_irq 9 high level)
> (XEN) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x00] disabled)
> (XEN) ACPI: IRQ0 used by override.
> (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge
> lint[0x1])
> (XEN) ACPI: IRQ9 used by overri
> (XEN) ACPI: LAPIC_NMI
> (acpi_id[0x02] high edge lint[0x1])mode: Flat. Using 3 I/O
> APICs
> (XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])base:
> 0xfed00000
> (XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0
> se
> (XEN) ACPI: LAPIC_NMI (acpi_id[0x06] high edge
> lint[0x1])
> (XEN) Using sch
> (XEN) ACPI: LAPIC_NMI (acpi_id[0x07] high edge
> lint[0x1])
> (XEN) Detected 2266.814 M
> (XEN) ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])Initing memory
> sharing.
> (XEN
> (XEN) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
> (XEN) - APIC MMIO
> access virtualisation
> (XEN) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI
> 0-23
> (XEN) - Extended Page Tables (EPT)
> (XEN) ACPI: IOAPIC (id[0x02] address[0xfec10000]
> gsi_base[24])
> (XEN) - Virtual N
> (XEN) IOAPIC[1]: apic_id 2, version 32, address 0xfec10000, GSI
> 24-47
> (XEN) HVM: ASIDs
> enabled.
> (XEN) TSC is reliable, synchroniz
> (XEN) ACPI: IRQ2 used by override.
> (
> (XEN) ACPI: IRQ9 used by override.ET
> (XEN) Enabling APIC mode: Flat. Using 3 I/O
> APICs
> (XEN) microcode
> (XEN) ACPI: HPET id: 0x8086a301
> base: 0xfed00000
> (XEN) mic
> (XEN) PCI: MCFG configuration 0: base f0000000
> se
>
> (XEN) *** LOADING DOMAIN 0 ***
> (XEN) - APIC MMIO access virtualisationernel: 64-bit, lsb,
> compat32
> (XEN) - APIC TPR shadow
> (XEN) Dom0 kernel:
> (XEN) - Extended Page Tables (EPT)>
> 0x2768000
> (XEN) - Virtual-Processor Identifiers (VPID)N) PHYSICAL MEMORY
> ARRANGEMENT:
> (XEN) - Virtual NMI(XEN) Dom0 alloc.:
> (XEN) - MSR direct-access bitmap00 (725348 pages to be all
> (XEN) HVM: ASIDs enabled.
> (XEN) HVM: VMX enabl
> ocated)
>
> (XEN) ENABLING IO-APIC IRQs
> (XEN) -> Using new ACK
> method
> (XEN) Phys
> (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1
> pin2=-1dfdd
> (XEN) TSC is reliable, synchronization unnecessaryN) Start info:
> ffffffff831c8000->ffffffff831c8
> (XEN) Platform timer is 14.318MHz HPET
> üHòÆõ ÿþüiþ
> ÿ(XEN) Allocated console ring of 32 KiB.
> (XEN) Page tables:
> ffffffff831c9000-
> (XEN) microcode.c:73:d32767 microcode: CPU1 resumed
> \ \/ /___ _ __ | || | / _
> (XEN) microcode.c:73:d32767 microcode: CPU2
> resumed
> (XEN) ACPI sleep modes: S3f81a63200
> (XEN) mcheck_poll: Machine check polling timer started.
> (XEN) Dom0 has maximum 4 VCPUs
>
> (XEN) *** LOADING DOMAIN 0 ***XEN) Freed 156kB init memory.
> (XEN) Xen kernel: 64-bit, lsb, compat32 kernel into physical memoryfer
> time: 1 s
> (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x2768000etup ISA
> identity maps
> (XEN) Disc info
> (XEN) PHYSICAL MEMORY ARRANGEMENT:d...
> (XEN)
> (XEN) Dom0 alloc.: 00000000b4000000->00000000b8000000 (725348 pages to be
> all
> (XEN) Found 1 EDD info
> Initializing cgroup
> s
> ocated)
> (XEN)
> (XEN) Phys-Mach map:
> ffffffff82c1f000->ffffffff831c7b20fsdffsfsfsfsfsdfdd
> Xen: 0000000000095800 - 0000000000100000 (reserved)
> hello fsdffsf
> (XEN) Start info:
> ffffffff831c8000->ffffffff831c84b4fdd
> Xen: 0000000000100000 - 00000000
> üHòÆõ ÿþüiþ¿¯óÅÿçü __ __ (r2 HPQOEM)
> (XEN) Page tables: ffffffff831c9000->ffffffff831e6000
> Xen: 00000000bf7a5800 -
> 00000000c0000000 (reserved)PQ
> \ \/ /___ _ __ | || | / _ 0)
> /_/\_\___|_| |_| |_|(_)7010600070106
> (XEN) ENTRY ADDRESS: ffffffff81a63200
> (XE
> initial memory mapped
>
> (XEN) Xen version 4.0.0 (sun 1 0)
> (XEN) Dom0 has maximum 4 VCPUs
> (XEN) Freed 156kB init
> memory.00000000000-00000000b5164000
> (X
> mapping kernel into physical memoryfer time: 1 secondsCPI: MCFG BF7B8CF3,
> 003C
> Xen: setup ISA identity mapsge 4k 0)
> (XEN) Disc info
> k
> about to get started...les up to b5164000 @ 10
> (XEN) Found 1: TCPA BF7B8D2
> Initializing cgroup subsys cpuset 1
> (XEN) Found 1 EDD
> info
> Initializing cgroup s
>
> Xen: 0000000000000000 - 0000000000095800
> (usable)0000000)
> (XEN) 00000000fed45000 - 0000000100000000 (rG 00000000bf7b8cf3 0003C (v01
> HPQOEM TYLSBURG
> Xen: 0000000000095800 - 0000000000100000
> (reserved)
> AC
> (XEN) System RAM: 3033MB (3106320kB)HPQOEM TYLSBURG 00000001 000000
> Xen: 0000000000100000 - 00000000b5164000 (usable)9010, 0024 (r2
> HPQOEM)
> ACPI: SLIC 00000000bf7b8d61 00176 (v01 HPQOEM SLIC-WKS 00000001
> Xen: 00000000bf7a5800 - 00000000c0000000 (reserved)PQOEM SLIC-WKS
> 20091208 0)
> ACPI: HPET 00000000bf7b8ed7 00038 (v01 HPQOEM
> TYLS
> x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106: Local APIC
> address 0xfee00000APIC address 0xfee00000
> (XE
> No
> initial memory mapped : 0 - 20000000OEM TYLSBURG 1
> 0)0000000000000-00000000b5164000
> (XEN)
> init_memory_mapping: 0000000000000000-00000000b5164000b5164000
> (XEN) ACPI: LAPIC
> (acpi_id[0x02] la
> (XEN) ACPI: MCFG BF7B8CF3, 003C008000 - 000000000001ffff]
> 0000000000 - 00b5164000 page 4k 0)
> bootmap [0000000000020000 - 000000000
> kernel direct mapping tables up to b5164000 @ 100000-6ad000ACPI: TCPA
> BF7B8D2F, 0032 (r1 HPQOEM TYLSBURG 10000000 - 00b5164000]or #4 7:10
> APIC version 21
>
> ACPI: MCFG 00000000bf7b8cf3 0003C (v01 HPQOEM TYLSBURG 00000001
> 00000000)002747680] ACPI: LAPIC
> (acpi_id[0x08] lapic_id[0x00] disabled)
> ACPI: TCPA 00000000bf7b8d2f 00032 (v01 HPQOEM TYLSBURG 00000001
> 00000000)2c1ec00]0]
> disabled)
>
> ACPI: SLIC 00000000bf7b8d61 00176 (v01 HPQOEM SLIC-WKS 00000001
> 00000000)c9000]
> (XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[
> ACPI: HPET 00000000bf7b8ed7 00038
> (v01 HPQOEM TYLSRK
>
> No NUMA configuration found
> (XEN) ACPI: LAPIC (acpi_i
> Faking a node at 0000000000000000-00000000b51640000] lapic_id[0x00]
> disabled)
> (XEN) Process
> Bootmem setup node 0 0000000000000000-00000000b5164000I (acpi_id
> (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0
> NODE_DATA [0000000000008000 - 000000000001ffff]I: LAPIC_NMI (acpi_
> (XEN) Processor #2 7:10 APIC
> bootmap [0000000000020000 - 0000000000036a2f] pages 17PI: LAPIC
> (acpi_id[0x03] lapic_id[0x04] enabled)nt[0x1])
> (8 early reservations) ==> bootmem [0000000000 - 00b5164000]or #4 7:10 APIC
> version 21[0x04] high edge
> lint[
> #3 [0001000000 - 0002747680] TEXT DATA BSS ==> [0001000000 - 0002747680]
> ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)C[0]: apic_id 1, version
> #4 [0002768000 - 0002c1ec00] RAMDISK ==> [0002768000 -
> 0002c1ec00]0] disabled)
> (XEN) ACPI: IOAPIC (id[0x02] address[0xfec1000
> (XEN) A
> #5 [0002c1f000 - 00031c9000] XEN START INFO ==> [0002c1f000 -
> 00031c9000]OAPIC[1]: apic_id 2, version
> (XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x00]
> #6 [0002748000 - 0002748120] BRK
>
>
>
> (XEN) ACPI:
> /_/\_\___|_| |_| |_|(_)___(_)___/
> (XEN) ACPI: LAPIC_NMI (acpi_id[0
>
> (XEN) Xen version 4.0.0 (@) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-44
> (XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])mode: Flat. Using
> 3
> )) Tue Jun 8 15:44:03 PDT 2010
> (XEN) ACPI: LAPIC_NMI (acpi
> (XEN) Latest ChangeSet: unavailable0xfed00000
> (XEN) Command line: noreboot dom0_mem=max:1G loglvl=all com1ge lint[0
> se
> (XEN) Found 1 MBR signatureshigh edge lint[0x1])Initing m
> (XEN) Found 1 EDD information structures
> (XEN
> (XEN) ACPI: IOAPIC (id[0x01] addre
> (XEN) Xen-e820 RAM map:0])
> (XEN)
> (XEN) 0000000000000000 - 0000000000095800 (usable)IC[0]: apic_id 1, version
> 32, address 0xfec00000, G
> (XEN) 0000000000095800 - 00000000000a0000 (reserved))
> (XEN) ACPI: IOAPIC (id[0x02] ad
> (XEN) 00000000000e8000 - 0000000000100000
> (reserved)
> (XEN) - Virtual N
> (XEN) IOAPIC[
> (XEN) 0000000000100000 - 00000000bf7a5800 (usable)4-47
> (XEN) HVM: ASIDs enabled.
> (XEN) 00000000bf7a5800 - 00000
> (XEN) ACPI: APIC BF7B8B7C, 0114 (r1 HPQOEM TYLSBURG 1
> 0)microcode: CPU3 resumed
> (XEN) Using ACPI (MADT) for SMP configuration infor
> (XEN) ACPI: ASF! BF7B8C90, 0063 (r32 HPQOEM TYLSBURG
> 1 0)cheduler: SMP Credit Scheduler
> (credit)ast
> (XEN) ACPI: MCFG BF7B8CF3, 003C (r1 HPQOEM TYLSBURG 1
> 0)
> (XEN)
> (XEN) Initing memory sharing.ling timer started.
> (XEN) ACPI: TCPA BF7B8D2F, 0032 (r1 HPQOEM TYLSBURG 1 0)
> (XEN) - APIC MMIO access virtualisationernel: 64-bit, lsb, compat32
> (XEN) ACPI: SLIC BF7B8D61,
> 0176 (r1 HPQOEM SLIC-WKS 1 0) Page Tables (EPT)>
> 0x2768000
> (XEN) - Virtual-Proc
> (XEN) ACPI: HPET BF7B8ED7, 0038 (r1 HPQOEM TYLSBURG 1 0) -
> Virtual NMI(XEN) Dom0 alloc.:
> (XEN) - MSR direct-access bitmap00 (725
> (XEN) ACPI: DMAR BF7B8F0F, 01B8 (r1 HPQOEM TYLSBURG
> (XEN) HVM: VMX enabl
> ocated)
>
> (XEN) ..TIMER: vector=0x
> (XEN) DMI 2.6 present.=-1
> pin2=-1
> (XEN) Using APIC driver default ffffffff831c9
> (XEN) TSC is re
> (XEN) ACPI: PM-Timer IO Port: 0xf808
> (XEN) Boot
> (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[f804,460],
> pm1x_evt[f800,0]
> ÿ(XEN) Allocated console ring of 32 KiB.f
> (XEN) ACPI: wakeup_vec[bf7b880c], vec_size[20]767 microcode:
> CPU1 resumedENTRY ADDRESS: ffffffff81a63200
> (XEN) ACPI: Local APIC address 0xfee000007 microcode: CPU2
> resumed
> (XEN) Xen ke
> (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)Initializin
> (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr
> (XEN) Processor #6 7:10 APIC version 21u
> Linux v
> (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)080704 (Red Hat
> (XEN) Dom0 alloc.: 00000000b40000
> (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)Thu May 20 17:22:39
> PDT 2010
> (XEN) Phys-Mach map: ffffffff82c1f000->ffffffff831
> (XEN)
> ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x00] disabled)
> (XEN) Start info: ffffffff831c8000->ffffffff831c8
> (XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x00] disabled)
> (XEN) Page tables: ffffffff831c9000->ffffffff831e600
> (XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x00] disabled)(XEN) Boot
> stack: ffffffff831e6000->ffffffff831e70000
> (XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x00] disabled)EN) TOTAL:
> ffffffff80000000->ffffffff83400000580
> (XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x00] disabled)) ENTRY ADDRESS:
> ffffffff81a63200000000f0000000 - 000000
> (XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x00] disa
>
>
>
> ma
> (XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
> initial
> Xen: setup ISA identity maps
> (XEN) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])Initializing cgroup
> subsys cpuset
> (XEN) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
> Linux version 2.6.32.13 (root@host)
> (XEN) ACPI: LAPIC_NMI (acpi_id[0x07] high edge
> lint[0x1])
> RAMDISK: 02768000 - 02c1ec00
> (XEN) ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0024 (v02
> HP
>
> Xen: 00000000fed45000 - 0000000
> (XEN) ACPI: IRQ9 used by override.0000bf7b8d61 00176 (v01 HPQOEM SLI
> (XEN) Enabling APIC mode: Flat. Using 3 I/O APICs
> DMI 2.6 present.
> last_
> (XEN) ACPI: HPET id: 0x8086a301 base: 0xfed00000M TYLSBURG 00000001
> 00000000)
> x86 PAT ena
> (XEN) PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127
> 00000000bf7b8f0f 001B8 (v01 HPQOEM TY
> initial memory mapped : 0 -
> (XEN) PCI: MCFG area at f0000000 reserved in E820_memory_mapping:
> 0000000000000000-00000000b516400
> (XEN) Using ACPI (MADT) for SMP configuration information000000000 -
> 00b5164000 page 4k
> (XEN) Using scheduler: SMP Credit Scheduler
> (credit)00000-6ad000
> No NUMA co
> (XEN) Detected 2266.801 MHz processor. 02c1ec00ing a node at 00000000000000
>
> (XEN) Initing memory sharing.024 (v02
> HP
> (XEN) - MSR direct-access bitmap #0 [0000000000 - 0000001
> ACPI: F
> (XEN) HVM: ASIDs enabled.000 - 0000001000]
> (XEN) HVM: VMX enabled00000bf7b8b7c 00114 (v
> (XEN) HVM: Hardware Assisted Paging detected.031e6000] XEN PAGETABLES ==>
> [00031c9000 -
> (XEN) Intel machine check reporting enabled00000bf7b8c90 00063 (v32 HPQOEM
> TYLSBURG 00
> (XEN) I/O virtualisation disabled TRAMPOLINE ==> [0000006000 -
> (XEN) Total of 4 processors activated.MCFG 00000000bf7b8cf3 0003C (v01 HPQOE
> (XEN) ENABLING IO-APIC IRQs00000)02747680] TEXT DAT
> (XEN) -> Using new ACK method
>
>
> ÿ(XEN) Allocated console ring of 32 KiB.7b8ed7 00038 (v01 HPQOEM TYLSBURG
> 000000
> (XEN) microcode.c:73:d32767 microcode: CPU1
> resumed
> #7
> ACPI:
> (XEN) microcode.c:73:d32767 microcode: CPU2 resumed0001
> 00000000)
> (XEN) Brought up 4 CPUs _ _ ___ _
>
> (XEN) microcode.c:73:d32767 microcode: CPU3 resumedM 80000001 INTL
> 20061109)
> (XEN) Turbo Mode detected! | || |_| | | | | | |
> (XEN) HPET: 4 timers in total, 0 timers will be used for broadcast |_|
> No NUMA configuration found
> /_/\_\___|_|
> Faking
> (XEN) ACPI sleep modes: S3-00000000b5164000
> (8 early reservations) ==> bootmem [0000000000 - 00b5164000]
> (XEN) PHYSICAL MEMORY ARRANGEMENT:
> #0 [000000
> (XEN) Dom0 alloc.: 00000000b4000000->00000000b8000000 (245760 pages to be
> allN) VGA is text mode 80x25, font
> 8x16
> #1 [00031c9000 -
> ocated)000]
> (XEN) VIRTUAL MEMORY ARRANGEMENT:0031e6000]
> (XEN) Loaded kernel: ffffffff81000000->ffffffff82768000#2 [0000006000 -
> 0000008000] TRAMPOLINE ==> [00000
> (XEN) Init. ramdisk:
> ffffffff82768000->ffffffff82c1ec00ructures
> #3 [0001000000
> (XEN) Phys-Mach map: ffffffff82c1f000->ffffffff800000000000000 -
> 000
> (XEN) 00000000f0000000 - 0
> (XEN) ENTRY ADDRESS: ffffffff81a63200d000] PGTABLE ==> [0000100000
> (XEN) Dom0 has maximum 4 VCPUs000000fed40000 (reserved)
> (XEN) Scrubbing Free RAM: ....................done.N) 00000000fed45000 - 00
> \ \/ /___ _ __ | || |
> (XEN) Xen trace buffers: disabled
> \ // _ \ '_ \
> (XEN) Std. Loglevel: All
> (XEN) Guest Loglevel: All | |__ _| |_| | |_| |OE
> (XEN) *** Serial input ->
> DOM0 (type 'CTRL-a' three times to switch input to Xen HPQOEM SLIC-WKS
> 20091208
>
>
> )
> (XEN) C
> Initializing cgroup subsys cpul com1=38400,8n1 console=com1
> Linux version 2.6.32.13 (root@host) (gcc version 4.1.2 20080704 (Red
> Hat
> est_loglvl=all
> (XEN) Video information:
> (XEN) AC
> 4.1.2-44)) #2 SMP Thu May 20 17:22:39 PDT 201016 1
> 0)
> (XEN
> Command line: ro root=/dev/sda2 console=hvc0 earlyprintk=xen nomodeset debug
> log (r1 HPQOEM TYLSBURG 1
> (XEN) Disc information:
> (XE
> level=10 1 MBR s
> KERNEL supported cpus:(XEN) ACPI: TCP
> (XEN)
> Intel GenuineIntelion structures 1
> AMD AuthenticAMD
> bootconsole [xenboot0] enabled
> DMI 2.6 present.
> last_pfn = 0x40000 max_arch_pfn = 0x400000000
> x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106
> initial memory mapped : 0 - 20000000
> init_memory_mapping:
> 0000000000000000-0000000040000000
> 0000000000 - 0040000000 page 4k
> kernel direct mapping tables up to 40000000 @ 100000-302000
> RAMDISK: 02768000 - 02c1ec00
> ACPI: RSDP 00000000000e9010 00024 (v02 HPQOEM)
> ACPI: XSDT 00000000bf7b88e8 0006C (v01 HPQOEM SLIC-WKS 20091208 00000000)
> ACPI: FACP 00000000bf7b8a88 000F4 (v03 HPQOEM TYLSBURG 00000001 00000000)
> ACPI: DSDT 00000000bf7b92d7 0A73D (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E)
> ACPI: FACS 00000000bf7b8800 00040
> ACPI: APIC 00000000bf7b8b7c 00114 (v01 HPQOEM TYLSBURG 00000001 00000000)
> ACPI: ASF! 00000000bf7b8c90 00063 (v32 HPQOEM TYLSBURG 00000001 00000000)
> ACPI: MCFG 00000000bf7b8cf3 0003C (v01 HPQOEM TYLSBURG 00000001 00000000)
> ACPI: TCPA 00000000bf7b8d2f 00032 (v01 HPQOEM TYLSBURG
> 00000001 00000000)
> ACPI: SLIC 00000000bf7b8d61 00176 (v01 HPQOEM SLIC-WKS 00000001 00000000)
> ACPI: HPET 00000000bf7b8ed7 00038 (v01 HPQOEM TYLSBURG 00000001 00000000)
> ACPI: 00000000bf7b8f0f 001B8 (v01 HPQOEM TYLSBURG 00000001 00000000)
> ACPI: SSDT 00000000bf7c4ee6 011FC (v01 INTEL PPM RCM 80000001 INTL 20061109)
> ACPI: Local APIC address 0xfee00000
> No NUMA co
>
> <stuck>
>
>
>
>
> --- On Tue, 6/15/10, Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx> wrote:
>
> From: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
> Subject: Re: [Xen-devel] boot Xen 4.0
> To: "ccmail111" <ccmail111@xxxxxxxxx>
> Cc: deshantm@xxxxxxxxx, "yingbin wang"
> <yingbin.wangyb@xxxxxxxxx>, xen-devel@xxxxxxxxxxxxxxxxxxx
> Date: Tuesday, June 15, 2010, 5:26 PM
>
> > Linux version 2.6.32.13 (root@xyz) (gcc version 4.1.2 20080704 (Red
> > Hat0095800 (usable)
> > (XEN) 00000
> > 4.1.2-44)) #2 SMP Thu May 20 17:22:39 PDT
> > 2010
> >
> > Xen: 0000000000000000 - 0000000000095800
> (usable)
> > (XEN) 00000000fed45000 - 0000000100000000 (r
> > Xen: 0000000000095800 - 0000000000100000 (reserved)
> > (XEN) System RAM: 3033MB (3106320kB)
> > Xen: 0000000000100000 - 00000000b5164000 (usable)9010, 0024 (r2
> > HPQOEM)
> > Xen: 00000000bf7a5800 - 00000000c0000000 (reserved)PQOEM SLIC-WKS
> > 20091208 0)
> > Xen: 00000000f0000000 - 00000000f8000000 (reserved)
> >
>
> > last_pfn = 0xb5164 max_arch_pfn = 0x400000000
> > (XEN) ACPI: APIC BF7B8B7C, 01
> > x86 PAT enabled: cpu 0, old 0x50100070406, new
> > 0x7010600070106
> > (XE
> > initial memory mapped : 0 - 20000000OEM TYLSBURG
> 1 0)
> > init_memory_mapping: 0000000000000000-00000000b5164000
> > (XEN) ACPI: MCFG BF7B8CF3, 003C
> > 0000000000 - 00b5164000 page 4k 0)
> > kernel direct mapping tables up to b5164000 @ 100000-6ad000ACPI: TCPA
> > BF7B8D2F, 0032 (r1 HPQOEM TYLSBURG 1
> > RAMDISK: 02768000 - 02c1ec00
> > ACPI: FACS 00000000bf7b8800 00040
> > ACPI: APIC
> 00000000bf7b8b7c 00114 (v01 HPQOEM TYLSBURG 00000001 00000000)
> > ACPI: ASF! 00000000bf7b8c90 00063 (v32 HPQOEM TYLSBURG 00000001
> > 00000000)
> > ACPI: MCFG 00000000bf7b8cf3 0003C (v01 HPQOEM TYLSBURG 00000001
> > 00000000)
> > ACPI: TCPA 00000000bf7b8d2f 00032 (v01 HPQOEM TYLSBURG 00000001
> > 00000000)
> > ACPI: SLIC 00000000bf7b8d61 00176 (v01 HPQOEM SLIC-WKS 00000001
> > 00000000)
> > ACPI: HPET 00000000bf7b8ed7 00038 (v01 HPQOEM TYLSBURG 00000001
> > 00000000)
> > ACPI: 00000000bf7b8f0f 001B8 (v01 HPQOEM TYLSBURG 00000001
> > 00000000)
> > ACPI: SSDT 00000000bf7c4ee6 011FC (v01 INTEL PPM RCM 80000001 INTL
> > 20061109)
> > ACPI: Local APIC address 0xfee00000
> > No NUMA configuration
> found
> > Faking a node at 0000000000000000-00000000b5164000
> > Bootmem setup node 0 0000000000000000-00000000b5164000
> > NODE_DATA [0000000000008000 - 000000000001ffff]
> > bootmap [0000000000020000 - 0000000000036a2f] pages 17
> > (8 early reservations) ==> bootmem [0000000000 - 00b5164000]
> > #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 -
> > 0000001000]
> > #1 [00031c9000 - 00031e6000] XEN PAGETABLES ==> [00031c9000 -
> > 00031e6000]
> > #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 -
> > 0000008000]
> > #3 [0001000000 - 0002747680] TEXT DATA BSS ==> [0001000000 -
> > 0002747680]
> > #4 [0002768000 - 0002c1ec00] RAMDISK ==> [0002768000 -
> > 0002c1ec00]
> > #5 [0002c1f000 -
> 00031c9000] XEN START INFO ==> [0002c1f000 - 00031c9000]
> > #6 [0002748000 - 0002748120] BRK ==> [0002748000 -
> > 0002748120]
> > #7 [0000100000 - 000068d000] PGTABLE ==> [0000100000
> >
> >
>
> This points to the E820 being wacked, but I can't see how that is
> possible considering Xen boots. Try forcing your domain to a smaller
> memory amount. Use 'dom0_mem=max:1G' in your Xen command line.
>
>
>
>
>
>
>
>
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home