WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-devel

Re: [Xen-devel] New DMAR errors in Xen 4.1

To: Weidong Han <weidong.han@xxxxxxxxx>
Subject: Re: [Xen-devel] New DMAR errors in Xen 4.1
From: Jeremy Fitzhardinge <jeremy@xxxxxxxx>
Date: Wed, 07 Apr 2010 09:55:55 -0700
Cc: Xen-devel <xen-devel@xxxxxxxxxxxxxxxxxxx>, Keir Fraser <keir.fraser@xxxxxxxxxxxxx>
Delivery-date: Wed, 07 Apr 2010 10:01:03 -0700
Envelope-to: www-data@xxxxxxxxxxxxxxxxxxx
In-reply-to: <4BBBF2E3.5090509@xxxxxxxxx>
List-help: <mailto:xen-devel-request@lists.xensource.com?subject=help>
List-id: Xen developer discussion <xen-devel.lists.xensource.com>
List-post: <mailto:xen-devel@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/mailman/listinfo/xen-devel>, <mailto:xen-devel-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/mailman/listinfo/xen-devel>, <mailto:xen-devel-request@lists.xensource.com?subject=unsubscribe>
References: <4BBBB7D9.20709@xxxxxxxx> <4BBBCB0D.5080500@xxxxxxxx> <4BBBF2E3.5090509@xxxxxxxxx>
Sender: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx
User-agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.1.9) Gecko/20100330 Fedora/3.0.4-1.fc12 Lightning/1.0b2pre Thunderbird/3.0.4
On 04/06/2010 07:50 PM, Weidong Han wrote:
It turns out its... "Enable debug=y by default in the build." So I guess these errors have been happening silently thus far?

     J

I don't encounter this issue. These DMAR fault messages will be printed even when debug=n. what platform are you using? could you post complete booting log with "iommu=verbose"?

This is a Supermicro X8SIL-F system, which is a Lynnfield + Ibex Peak system.

I've attached two boot logs below. The first is one where there lots of DMAR errors early, and the system is a disaster (basically doesn't come up, lots of devices fail to init). Unfortunately it looks like I mistyped "verbose".

The second boot was immediately after the first and it comes up cleanly with no DMAR errors at all. So it appears there's some non-determinism there. The gmfns in the messages always appear to be about he same, so I wonder if it depends on exactly what pages the kernel ends up allocating for IO? (It probably also means my bisection results are suspect.)

(BTW, what's a "type 9" E820 region?)

Thanks,
    J


 __  __            _  _    _                    _        _     _
 \ \/ /___ _ __   | || |  / |   _   _ _ __  ___| |_ __ _| |__ | | ___
  \  // _ \ '_ \  | || |_ | |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \
  /  \  __/ | | | |__   _|| |__| |_| | | | \__ \ || (_| | |_) | |  __/
 /_/\_\___|_| |_|    |_|(_)_|   \__,_|_| |_|___/\__\__,_|_.__/|_|\___|

(XEN) Xen version 4.1-unstable (jeremy@) (gcc version 4.4.3 20100127 (Red Hat 
4.4.3-4) (GCC) ) Tue Apr  6 17:23:29 PDT 2010
(XEN) Latest ChangeSet: Tue Apr 06 17:23:12 2010 -0700 21115:ea6c67dc4577
(XEN) Command line: com2=115200,8n1,0x3e8,5 console=com2,vga cpufreq=xen 
iommu=verbos8
(XEN) Video information:
(XEN)  VGA is text mode 80x25, font 8x16
(XEN)  VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN)  EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN)  Found 4 MBR signatures
(XEN)  Found 4 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN)  0000000000000000 - 000000000009d800 (usable)
(XEN)  000000000009d800 - 00000000000a0000 (reserved)
(XEN)  00000000000e0000 - 0000000000100000 (reserved)
(XEN)  0000000000100000 - 00000000bf790000 (usable)
(XEN)  00000000bf79e000 - 00000000bf7a0000 type 9
(XEN)  00000000bf7a0000 - 00000000bf7ae000 (ACPI data)
(XEN)  00000000bf7ae000 - 00000000bf7d0000 (ACPI NVS)
(XEN)  00000000bf7d0000 - 00000000bf7e0000 (reserved)
(XEN)  00000000bf7ed000 - 00000000c0000000 (reserved)
(XEN)  00000000e0000000 - 00000000f0000000 (reserved)
(XEN)  00000000fed20000 - 00000000fed40000 (reserved)
(XEN)  00000000fee00000 - 00000000fee01000 (reserved)
(XEN)  0000000100000000 - 0000000140000000 (usable)
(XEN) ACPI: RSDP 000FA110, 0024 (r2 ACPIAM)
(XEN) ACPI: XSDT BF7A0100, 0084 (r1 SMCI            20100225 MSFT       97)
(XEN) ACPI: FACP BF7A0290, 00F4 (r4 022510 FACP1918 20100225 MSFT       97)
(XEN) ACPI: DSDT BF7A05F0, 6C55 (r2  10605 10605000        0 INTL 20051117)
(XEN) ACPI: FACS BF7AE000, 0040
(XEN) ACPI: APIC BF7A0390, 0092 (r2 022510 APIC1918 20100225 MSFT       97)
(XEN) ACPI: MCFG BF7A0430, 003C (r1 022510 OEMMCFG  20100225 MSFT       97)
(XEN) ACPI: OEMB BF7AE040, 0073 (r1 022510 OEMB1918 20100225 MSFT       97)
(XEN) ACPI: HPET BF7AA5F0, 0038 (r1 022510 OEMHPET  20100225 MSFT       97)
(XEN) ACPI: GSCI BF7AE0C0, 2024 (r1 022510 GMCHSCI  20100225 MSFT       97)
(XEN) ACPI: DMAR BF7B00F0, 0090 (r1    AMI  OEMDMAR        1 MSFT       97)
(XEN) ACPI: SSDT BF7B1580, 0363 (r1 DpgPmm    CpuPm       12 INTL 20051117)
(XEN) ACPI: EINJ BF7AA630, 0130 (r1  AMIER AMI_EINJ 20100225 MSFT       97)
(XEN) ACPI: BERT BF7AA7C0, 0030 (r1  AMIER AMI_BERT 20100225 MSFT       97)
(XEN) ACPI: ERST BF7AA7F0, 01B0 (r1  AMIER AMI_ERST 20100225 MSFT       97)
(XEN) ACPI: HEST BF7AA9A0, 00A8 (r1  AMIER ABC_HEST 20100225 MSFT       97)
(XEN) System RAM: 4056MB (4153584kB)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-0000000140000000
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000ff780
(XEN) DMI present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x808
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0]
(XEN) ACPI:                  wakeup_vec[bf7ae00c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
(XEN) Processor #2 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
(XEN) Processor #4 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
(XEN) Processor #6 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
(XEN) ACPI: IOAPIC (id[0x07] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 7, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode:  Flat.  Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
(XEN) PCI: MCFG area at e0000000 reserved in E820
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2400.067 MHz processor.
(XEN) Initing memory sharing.
(XEN) EPT support 2M super page.
(XEN) VMX: Supported advanced features:
(XEN)  - APIC MMIO access virtualisation
(XEN)  - APIC TPR shadow
(XEN)  - Extended Page Tables (EPT)
(XEN)  - Virtual-Processor Identifiers (VPID)
(XEN)  - Virtual NMI
(XEN)  - MSR direct-access bitmap
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging detected.
(XEN) Intel machine check reporting enabled
(XEN) Intel VT-d Snoop Control supported.
(XEN) Intel VT-d DMA Passthrough not supported.
(XEN) Intel VT-d Queued Invalidation supported.
(XEN) Intel VT-d Interrupt Remapping not supported.
(XEN) I/O virtualisation enabled
(XEN) I/O virtualisation for PV guests disabled
(XEN) EPT support 2M super page.
(XEN) EPT support 2M super page.
(XEN) EPT support 2M super page.
(XEN) Total of 4 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN)  ->  Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) TSC is reliable, synchronization unnecessary
(XEN) Platform timer is 14.318MHz HPET
�(XEN) Allocated console ring of 32 KiB.
(XEN) microcode.c:73:d32767 microcode: CPU1 resumed
(XEN) microcode.c:73:d32767 microcode: CPU2 resumed
(XEN) Brought up 4 CPUs
(XEN) microcode.c:73:d32767 microcode: CPU3 resumed
(XEN) Turbo Mode detected!
(XEN) HPET: 8 timers in total, 8 timers will be used for broadcast
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0x69c000
(XEN) elf_parse_binary: phdr: paddr=0x169c000 memsz=0xe3cb0
(XEN) elf_parse_binary: phdr: paddr=0x1780000 memsz=0x888
(XEN) elf_parse_binary: phdr: paddr=0x1781000 memsz=0x14498
(XEN) elf_parse_binary: phdr: paddr=0x1796000 memsz=0x9f5000
(XEN) elf_parse_binary: memory: 0x1000000 ->  0x218b000
(XEN) elf_xen_parse_note: GUEST_OS = "linux"
(XEN) elf_xen_parse_note: GUEST_VERSION = "2.6"
(XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0"
(XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000
(XEN) elf_xen_parse_note: ENTRY = 0xffffffff81796200
(XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81009000
(XEN) elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb"
(XEN) elf_xen_parse_note: PAE_MODE = "yes"
(XEN) elf_xen_parse_note: LOADER = "generic"
(XEN) elf_xen_parse_note: unknown xen elf note (0xd)
(XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1
(XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000
(XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0
(XEN) elf_xen_addr_calc_check: addresses:
(XEN)     virt_base        = 0xffffffff80000000
(XEN)     elf_paddr_offset = 0x0
(XEN)     virt_offset      = 0xffffffff80000000
(XEN)     virt_kstart      = 0xffffffff81000000
(XEN)     virt_kend        = 0xffffffff8218b000
(XEN)     virt_entry       = 0xffffffff81796200
(XEN)     p2m_base         = 0xffffffffffffffff
(XEN)  Xen  kernel: 64-bit, lsb, compat32
(XEN)  Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 ->  0x218b000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN)  Dom0 alloc.:   0000000138000000->000000013c000000 (981633 pages to be 
allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN)  Loaded kernel: ffffffff81000000->ffffffff8218b000
(XEN)  Init. ramdisk: ffffffff8218b000->ffffffff82b69800
(XEN)  Phys-Mach map: ffffffff82b6a000->ffffffff83307408
(XEN)  Start info:    ffffffff83308000->ffffffff833084b4
(XEN)  Page tables:   ffffffff83309000->ffffffff83326000
(XEN)  Boot stack:    ffffffff83326000->ffffffff83327000
(XEN)  TOTAL:         ffffffff80000000->ffffffff83400000
(XEN)  ENTRY ADDRESS: ffffffff81796200
(XEN) Dom0 has maximum 4 VCPUs
(XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 ->  0xffffffff8169c000
(XEN) elf_load_binary: phdr 1 at 0xffffffff8169c000 ->  0xffffffff8177fcb0
(XEN) elf_load_binary: phdr 2 at 0xffffffff81780000 ->  0xffffffff81780888
(XEN) elf_load_binary: phdr 3 at 0xffffffff81781000 ->  0xffffffff81795498
(XEN) elf_load_binary: phdr 4 at 0xffffffff81796000 ->  0xffffffff81830000
(XEN) Scrubbing Free RAM: .done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input ->  DOM0 (type 'CTRL-a' three times to switch input to 
Xen)
(XEN) Freed 164kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32.11 (jeremy@xxxxxxxxxxxxxxx) (gcc version 4.4.3 20100127 
(Red Hat 4.4.3-4) (GCC) ) #7 SMP PREEMPT Mon Apr 5 14:58:54 PDT 2010
Command line: ro root=/dev/mapper/vg_lilith--raid-root  LANG=en_US.UTF-8 
SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us ignore_loglevel 
earlyprintk=xen console=hvc0 rdshell pcie_aspm=off
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
xen_release_chunk: looking at area pfn bf790-bf79e: 14 pages freed
xen_release_chunk: looking at area pfn bf7e0-bf7ed: 13 pages freed
xen_release_chunk: looking at area pfn c0000-e0000: 131072 pages freed
xen_release_chunk: looking at area pfn f0000-fec00: 14977 pages freed
xen_release_chunk: looking at area pfn fec01-fed20: 0 pages freed
xen_release_chunk: looking at area pfn fed40-fee00: 0 pages freed
released 146076 pages of unused memory
BIOS-provided physical RAM map:
 Xen: 0000000000000000 - 000000000009d800 (usable)
 Xen: 000000000009d800 - 0000000000100000 (reserved)
 Xen: 0000000000100000 - 00000000bf790000 (usable)
 Xen: 00000000bf79e000 - 00000000bf7a0000 type 9
 Xen: 00000000bf7a0000 - 00000000bf7ae000 (ACPI data)
 Xen: 00000000bf7ae000 - 00000000bf7d0000 (ACPI NVS)
 Xen: 00000000bf7d0000 - 00000000bf7e0000 (reserved)
 Xen: 00000000bf7ed000 - 00000000c0000000 (reserved)
 Xen: 00000000e0000000 - 00000000f0000000 (reserved)
 Xen: 00000000fec00000 - 00000000fec01000 (reserved)
 Xen: 00000000fed20000 - 00000000fed40000 (reserved)
 Xen: 00000000fee00000 - 00000000fee01000 (reserved)
debug: ignoring loglevel setting.
bootconsole [xenboot0] enabled
DMI present.
last_pfn = 0xbf790 max_arch_pfn = 0x400000000
x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000bf790000
 0000000000 - 00bf790000 page 4k
kernel direct mapping tables up to bf790000 @ 100000-700000
RAMDISK: 0218b000 - 02b69800
ACPI: RSDP 00000000000fa110 00024 (v02 ACPIAM)
ACPI: XSDT 00000000bf7a0100 00084 (v01 SMCI            20100225 MSFT 00000097)
ACPI: FACP 00000000bf7a0290 000F4 (v04 022510 FACP1918 20100225 MSFT 00000097)
ACPI: DSDT 00000000bf7a05f0 06C55 (v02  10605 10605000 00000000 INTL 20051117)
ACPI: FACS 00000000bf7ae000 00040
ACPI: APIC 00000000bf7a0390 00092 (v02 022510 APIC1918 20100225 MSFT 00000097)
ACPI: MCFG 00000000bf7a0430 0003C (v01 022510 OEMMCFG  20100225 MSFT 00000097)
ACPI: OEMB 00000000bf7ae040 00073 (v01 022510 OEMB1918 20100225 MSFT 00000097)
ACPI: HPET 00000000bf7aa5f0 00038 (v01 022510 OEMHPET  20100225 MSFT 00000097)
ACPI: GSCI 00000000bf7ae0c0 02024 (v01 022510 GMCHSCI  20100225 MSFT 00000097)
ACPI:      00000000bf7b00f0 00090 (v01    AMI  OEMDMAR 00000001 MSFT 00000097)
ACPI: SSDT 00000000bf7b1580 00363 (v01 DpgPmm    CpuPm 00000012 INTL 20051117)
ACPI: EINJ 00000000bf7aa630 00130 (v01  AMIER AMI_EINJ 20100225 MSFT 00000097)
ACPI: BERT 00000000bf7aa7c0 00030 (v01  AMIER AMI_BERT 20100225 MSFT 00000097)
ACPI: ERST 00000000bf7aa7f0 001B0 (v01  AMIER AMI_ERST 20100225 MSFT 00000097)
ACPI: HEST 00000000bf7aa9a0 000A8 (v01  AMIER ABC_HEST 20100225 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-00000000bf790000
Bootmem setup node 0 0000000000000000-00000000bf790000
  NODE_DATA [0000000000001000 - 0000000000005fff]
  bootmap [0000000000008000 -  000000000001fef7] pages 18
(8 early reservations) ==>  bootmem [0000000000 - 00bf790000]
  #0 [0000000000 - 0000001000]   BIOS data page ==>  [0000000000 - 0000001000]
  #1 [0003309000 - 0003326000]   XEN PAGETABLES ==>  [0003309000 - 0003326000]
  #2 [0000006000 - 0000008000]       TRAMPOLINE ==>  [0000006000 - 0000008000]
  #3 [0001000000 - 000216a048]    TEXT DATA BSS ==>  [0001000000 - 000216a048]
  #4 [000218b000 - 0002b69800]          RAMDISK ==>  [000218b000 - 0002b69800]
  #5 [0002b6a000 - 0003309000]   XEN START INFO ==>  [0002b6a000 - 0003309000]
  #6 [000216b000 - 000216b21b]              BRK ==>  [000216b000 - 000216b21b]
  #7 [0000100000 - 00006e0000]          PGTABLE ==>  [0000100000 - 00006e0000]
found SMP MP-table at [ffff8800000ff780] ff780
Zone PFN ranges:
  DMA      0x00000000 ->  0x00001000
  DMA32    0x00001000 ->  0x00100000
  Normal   0x00100000 ->  0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000000 ->  0x0000009d
    0: 0x00000100 ->  0x000bf790
On node 0 totalpages: 784173
  DMA zone: 88 pages used for memmap
  DMA zone: 1507 pages reserved
  DMA zone: 2402 pages, LIFO batch:0
  DMA32 zone: 16762 pages used for memmap
  DMA32 zone: 763414 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x07] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 7, version 0, address 0xfec00000, GSI 0-0
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ERROR: Unable to locate IOAPIC for GSI 2
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ERROR: Unable to locate IOAPIC for GSI 9
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 256
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 0000000000100000
Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
Booting paravirtualized kernel on Xen
Xen version: 4.1-unstable (preserve-AD) (dom0)
NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88000336d000 s83096 r8192 d23400 u114688
pcpu-alloc: s83096 r8192 d23400 u114688 alloc=28*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
trying to map vcpu_info 0 at ffff880003378020, mfn 13b378, offset 32
cpu 0 using vcpu_info at ffff880003378020
trying to map vcpu_info 1 at ffff880003394020, mfn 13b394, offset 32
cpu 1 using vcpu_info at ffff880003394020
trying to map vcpu_info 2 at ffff8800033b0020, mfn 13b3b0, offset 32
cpu 2 using vcpu_info at ffff8800033b0020
trying to map vcpu_info 3 at ffff8800033cc020, mfn 13b3cc, offset 32
cpu 3 using vcpu_info at ffff8800033cc020
Xen: using vcpu_info placement
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 765816
Policy zone: DMA32
Kernel command line: ro root=/dev/mapper/vg_lilith--raid-root  LANG=en_US.UTF-8 
SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us ignore_loglevel 
earlyprintk=xen console=hvc0 rdshell pcie_aspm=off
PCIe ASPM is disabled
PID hash table entries: 4096 (order: 3, 32768 bytes)
Initializing CPU#0
DMA: Placing 64MB software IO TLB between ffff88000794a000 - ffff88000b94a000
DMA: software IO TLB at phys 0x794a000 - 0xb94a000
xen_swiotlb_fixup: buf=ffff88000794a000 size=67108864
xen_swiotlb_fixup: buf=ffff88000b9aa000 size=32768
Memory: 2960308k/3137088k available (4691k kernel code, 396k absent, 176384k 
reserved, 2987k data, 656k init)
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:1280
xen: -->  irq=0
xen: -->  irq=1
xen: -->  irq=2
xen: -->  irq=3
xen: -->  irq=4
xen: -->  irq=5
xen: -->  irq=6
xen: -->  irq=7
xen: -->  irq=8
xen: -->  irq=9
xen: -->  irq=10
xen: -->  irq=11
xen: -->  irq=12
xen: -->  irq=13
xen: -->  irq=14
xen: -->  irq=15
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1
xen: registering gsi 9 triggering 0 polarity 0
xen_allocate_pirq: returning irq 9 for gsi 9
xen: -->  irq=9
xen: acpi sci 9
Console: colour VGA+ 80x25
console [hvc0] enabled, bootconsole disabled
console [hvc0] enabled, bootconsole disabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES:  8
... MAX_LOCK_DEPTH:          48
... MAX_LOCKDEP_KEYS:        8191
... CLASSHASH_SIZE:          4096
... MAX_LOCKDEP_ENTRIES:     16384
... MAX_LOCKDEP_CHAINS:      32768
... CHAINHASH_SIZE:          16384
 memory used by lock dependency info: 5855 kB
 per task-struct memory footprint: 1920 bytes
Xen: using vcpuop timer interface
installing Xen timer for CPU 0
  alloc irq_desc for 1279 on node 0
  alloc kstat_irqs on node 0
Detected 2400.066 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 
4800.13 BogoMIPS (lpj=2400066)
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 0/0x0 ->  Node 0
CPU: Unsupported number of siblings 16
Performance Events: unsupported p6 CPU model 30 no PMU driver, software events 
only.
lockdep: fixing up alternatives.
SMP alternatives: switching to UP code
ACPI: Core revision 20090903
  alloc irq_desc for 1278 on node 0
  alloc kstat_irqs on node 0
cpu 0 spinlock event irq 1278
  alloc irq_desc for 1277 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 1276 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 1275 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 1274 on node 0
  alloc kstat_irqs on node 0
installing Xen timer for CPU 1
  alloc irq_desc for 1273 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 1272 on node 0
  alloc kstat_irqs on node 0
cpu 1 spinlock event irq 1272
lockdep: fixing up alternatives.
SMP alternatives: switching to SMP code
  alloc irq_desc for 1271 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 1270 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 1269 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 1268 on node 0
  alloc kstat_irqs on node 0
Initializing CPU#1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 1/0x0 ->  Node 0
CPU: Unsupported number of siblings 16
installing Xen timer for CPU 2
  alloc irq_desc for 1267 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 1266 on node 0
  alloc kstat_irqs on node 0
cpu 2 spinlock event irq 1266
  alloc irq_desc for 1265 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 1264 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 1263 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 1262 on node 0
  alloc kstat_irqs on node 0
Initializing CPU#2
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 2/0x0 ->  Node 0
CPU: Unsupported number of siblings 16
installing Xen timer for CPU 3
  alloc irq_desc for 1261 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 1260 on node 0
  alloc kstat_irqs on node 0
cpu 3 spinlock event irq 1260
  alloc irq_desc for 1259 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 1258 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 1257 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 1256 on node 0
  alloc kstat_irqs on node 0
Initializing CPU#3
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 3/0x0 ->  Node 0
CPU: Unsupported number of siblings 16
Brought up 4 CPUs
Grant table initialized
Time: 16:42:50  Date: 04/07/10
NET: Registered protocol family 16
  alloc irq_desc for 1255 on node 0
  alloc kstat_irqs on node 0
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
bio: create slab<bio-0>  at 0
ERROR: Unable to locate IOAPIC for GSI 9
ACPI: EC: Look up EC in DSDT
ACPI Warning for \_SB_._OSC: Return type mismatch - found Integer, expected 
Buffer (20090903/nspredef-1006)
\_SB_:_OSC evaluation returned wrong type
_OSC request data:1 6
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI Warning: Incorrect checksum in table [OEMB] - 91, should be 8E 
(20090903/tbutils-314)
ACPI Warning: Incorrect checksum in table [    ] - 7B, should be BF 
(20090903/tbutils-314)
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:1a.0: reg 10 32bit mmio: [0xfb3fc000-0xfb3fc3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 10 32bit mmio: [0xfb3fa000-0xfb3fa3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0xb400-0xb407]
pci 0000:00:1f.2: reg 14 io port: [0xbc00-0xbc03]
pci 0000:00:1f.2: reg 18 io port: [0xb880-0xb887]
pci 0000:00:1f.2: reg 1c io port: [0xb800-0xb803]
pci 0000:00:1f.2: reg 20 io port: [0xb480-0xb49f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xfb3f8000-0xfb3f87ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 64bit mmio: [0xfb3f6000-0xfb3f60ff]
pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
pci 0000:03:00.0: reg 10 32bit mmio: [0xfb420000-0xfb43ffff]
pci 0000:03:00.0: reg 14 32bit mmio: [0xfb480000-0xfb4fffff]
pci 0000:03:00.0: reg 18 io port: [0xcc00-0xcc1f]
pci 0000:03:00.0: reg 1c 32bit mmio: [0xfb41c000-0xfb41ffff]
pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfb440000-0xfb47ffff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.0: bridge io port: [0xc000-0xcfff]
pci 0000:00:1c.0: bridge 32bit mmio: [0xfb400000-0xfb4fffff]
pci 0000:04:00.0: reg 10 32bit mmio: [0xfb5e0000-0xfb5fffff]
pci 0000:04:00.0: reg 18 io port: [0xdc00-0xdc1f]
pci 0000:04:00.0: reg 1c 32bit mmio: [0xfb5dc000-0xfb5dffff]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff]
pci 0000:00:1c.4: bridge 32bit mmio: [0xfb500000-0xfb5fffff]
pci 0000:05:00.0: reg 10 32bit mmio: [0xfb6e0000-0xfb6fffff]
pci 0000:05:00.0: reg 18 io port: [0xec00-0xec1f]
pci 0000:05:00.0: reg 1c 32bit mmio: [0xfb6dc000-0xfb6dffff]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:00:1c.5: bridge io port: [0xe000-0xefff]
pci 0000:00:1c.5: bridge 32bit mmio: [0xfb600000-0xfb6fffff]
pci 0000:06:03.0: reg 10 32bit mmio pref: [0xfa000000-0xfaffffff]
pci 0000:06:03.0: reg 14 32bit mmio: [0xfb7fc000-0xfb7fffff]
pci 0000:06:03.0: reg 18 32bit mmio: [0xfb800000-0xfbffffff]
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xfb700000-0xfbffffff]
pci 0000:00:1e.0: bridge 64bit mmio pref: [0xfa000000-0xfaffffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR24._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR25._PRT]
(XEN) PCI add device 00:00.0
(XEN) PCI add device 00:03.0
(XEN) PCI add device 00:05.0
(XEN) PCI add device 00:08.0
(XEN) PCI add device 00:08.1
(XEN) PCI add device 00:08.2
(XEN) PCI add device 00:08.3
(XEN) PCI add device 00:10.0
(XEN) PCI add device 00:10.1
(XEN) PCI add device 00:1a.0
(XEN) PCI add device 00:1c.0
(XEN) PCI add device 00:1c.4
(XEN) PCI add device 00:1c.5
(XEN) PCI add device 00:1d.0
(XEN) PCI add device 00:1e.0
(XEN) PCI add device 00:1f.0
(XEN) PCI add device 00:1f.2
(XEN) PCI add device 00:1f.3
(XEN) PCI add device 03:00.0
(XEN) PCI add device 04:00.0
(XEN) PCI add device 05:00.0
(XEN) PCI add device 06:03.0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 14 *15)
sync cpu 0 get result 1 max_id 3
sync cpu 1 get result 1 max_id 3
sync cpu 2 get result 1 max_id 3
sync cpu 3 get result 1 max_id 3
  alloc irq_desc for 1254 on node 0
  alloc kstat_irqs on node 0
xen_balloon: Initialising balloon driver with page order 0.
vgaarb: device added: PCI:0000:06:03.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
Switching to clocksource xen
pnp: PnP ACPI init
ACPI: bus type pnp registered
xen: registering gsi 8 triggering 1 polarity 0
xen_allocate_pirq: returning irq 8 for gsi 8
xen:scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8100 irq 1247
ata2: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8180 irq 1247
ata3: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8200 irq 1247
ata4: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8280 irq 1247
ata5: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8300 irq 1247
ata6: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8380 irq 1247
usb 1-1: udev 2, busnum 1, minor = 1
usb 1-1: New USB device found, idVendor=8087, idProduct=0020
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: usb_probe_device
usb 1-1: configuration #1 chosen from 1 choice
usb 1-1: adding 1-1:1.0 (config #1, interface 0)
hub 1-1:1.0: usb_probe_interface
hub 1-1:1.0: usb_probe_interface - got id
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
hub 1-1:1.0: standalone hub
hub 1-1:1.0: individual port power switching
hub 1-1:1.0: individual port over-current protection
hub 1-1:1.0: Single TT
hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
hub 1-1:1.0: Port indicators are supported
hub 1-1:1.0: power on to power good time: 100ms
hub 1-1:1.0: local power source is good
hub 1-1:1.0: enabling power on all ports
hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000
hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
ehci_hcd 0000:00:1d.0: port 1 high speed
ehci_hcd 0000:00:1d.0: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
hub 1-1:1.0: port 2: status 0101 change 0001
usb 2-1: new high speed USB device using ehci_hcd and address 2
ehci_hcd 0000:00:1d.0: port 1 high speed
ehci_hcd 0000:00:1d.0: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
usb 1-1: link qh256-0001/ffff8800bcd9ab40 start 1 [1/0 us]
usb 2-1: udev 2, busnum 2, minor = 129
usb 2-1: New USB device found, idVendor=8087, idProduct=0020
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: usb_probe_device
usb 2-1: configuration #1 chosen from 1 choice
usb 2-1: adding 2-1:1.0 (config #1, interface 0)
hub 2-1:1.0: usb_probe_interface
hub 2-1:1.0: usb_probe_interface - got id
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
hub 2-1:1.0: standalone hub
hub 2-1:1.0: individual port power switching
hub 2-1:1.0: individual port over-current protection
hub 2-1:1.0: Single TT
hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns)
hub 2-1:1.0: Port indicators are supported
hub 2-1:1.0: power on to power good time: 100ms
hub 2-1:1.0: local power source is good
hub 2-1:1.0: enabling power on all ports
hub 1-1:1.0: state 7 ports 6 chg 0004 evt 0000
hub 1-1:1.0: port 2, status 0101, change 0000, 12 Mb/s
usb 1-1.2: new full speed USB device using ehci_hcd and address 3
hub 1-1:1.0: port 2 not reset yet, waiting 10ms
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD10EADS-00P8B0, 01.00A01, max UDMA/133
ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD10EADS-00P 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support 
DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
 sda:
usb 2-1: link qh256-0001/ffff8800be450cc0 start 1 [1/0 us]
 sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-1.2: skipped 1 descriptor after interface
usb 1-1.2: skipped 1 descriptor after interface
usb 1-1.2: default language 0x0409
usb 1-1.2: udev 3, busnum 1, minor = 2
usb 1-1.2: New USB device found, idVendor=0557, idProduct=2221
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2: Product: Hermon USB hidmouse Device
usb 1-1.2: Manufacturer: Winbond Electronics Corp
usb 1-1.2: usb_probe_device
usb 1-1.2: configuration #1 chosen from 1 choice
usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0)
usbhid 1-1.2:1.0: usb_probe_interface
usbhid 1-1.2:1.0: usb_probe_interface - got id
input: Winbond Electronics Corp Hermon USB hidmouse Device as 
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4
generic-usb 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond 
Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.2/input0
usb 1-1.2: adding 1-1.2:1.1 (config #1, interface 1)
usbhid 1-1.2:1.1: usb_probe_interface
usbhid 1-1.2:1.1: usb_probe_interface - got id
input: Winbond Electronics Corp Hermon USB hidmouse Device as 
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input5
usb 1-1.2: link qh8-0601/ffff8800bc52e440 start 2 [1/2 us]
generic-usb 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond 
Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.2/input1
hub 2-1:1.0: state 7 ports 8 chg 0000 evt 0000
hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0004
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7
ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD103SI  1AG0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support 
DPO or FUA
 sdb: sdb1 sdb2 sdb3 sdb4
sd 1:0:0:0: [sdb] Attached SCSI disk
input: ImExPS/2 Generic Explorer Mouse as 
/devices/platform/i8042/serio1/input/input6
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: WDC WD10EADS-00P8B0, 01.00A01, max UDMA/133
ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      WDC WD10EADS-00P 01.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support 
DPO or FUA
 sdc: sdc1 sdc2 sdc3 sdc4
sd 2:0:0:0: [sdc] Attached SCSI disk
hub 2-1:1.0: hub_suspend
usb 2-1: unlink qh256-0001/ffff8800be450cc0 start 1 [1/0 us]
usb 2-1: usb auto-suspend
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7
ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access     ATA      SAMSUNG HD103SI  1AG0 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support 
DPO or FUA
 sdd: sdd1 sdd2 sdd3 sdd4
sd 3:0:0:0: [sdd] Attached SCSI disk
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
md: raid10 personality registered for level 10
Intel AES-NI instructions are not detected.
md: md0 stopped.
md: bind<sdb3>
md: bind<sdc3>
md: bind<sdd3>
md: bind<sda3>
raid10: md0 is not clean -- starting background reconstruction
raid10: raid set md0 active with 4 out of 4 devices
md0: detected capacity change from 0 to 838860668928
md: resync of RAID array md0
md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) 
for resync.
md: using 128k window, over a total of 819199872 blocks.
(XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] fault addr 
bf579000, iommu reg = ffff82c3fff57000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf579
(XEN)     root_entry = ffff83013ff36000
(XEN)     root_entry[0] = 13c6bb001
(XEN)     context = ffff83013c6bb000
(XEN)     context[fa] = 2_13fec4001
(XEN)     l4 = ffff83013fec4000
(XEN)     l4_index = 0
(XEN)     l4[0] = 13fec1003
(XEN)     l3 = ffff83013fec1000
(XEN)     l3_index = 2
(XEN)     l3[2] = 13ccbe003
(XEN)     l2 = ffff83013ccbe000
(XEN)     l2_index = 1fa
(XEN)     l2[1fa] = 13cac3003
(XEN)     l1 = ffff83013cac3000
(XEN)     l1_index = 179
(XEN)     l1[179] = 0
(XEN)     l1[179] not present
(XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] fault addr 
bf579000, iommu reg = ffff82c3fff57000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf579
(XEN)     root_entry = ffff83013ff36000
(XEN)     root_entry[0] = 13c6bb001
(XEN)     context = ffff83013c6bb000
(XEN)     context[fa] = 2_13fec4001
(XEN)     l4 = ffff83013fec4000
(XEN)     l4_index = 0
(XEN)     l4[0] = 13fec1003
(XEN)     l3 = ffff83013fec1000
(XEN)     l3_index = 2
(XEN)     l3[2] = 13ccbe003
(XEN)     l2 = ffff83013ccbe000
(XEN)     l2_index = 1fa
(XEN)     l2[1fa] = 13cac3003
(XEN)     l1 = ffff83013cac3000
(XEN)     l1_index = 179
(XEN)     l1[179] = 0
(XEN)     l1[179] not present
(XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] fault addr 
bf578000, iommu reg = ffff82c3fff57000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf578
(XEN)     root_entry = ffff83013ff36000
(XEN)     root_entry[0] = 13c6bb001
(XEN)     context = ffff83013c6bb000
(XEN)     context[fa] = 2_13fec4001
(XEN)     l4 = ffff83013fec4000
(XEN)     l4_index = 0
(XEN)     l4[0] = 13fec1003
(XEN)     l3 = ffff83013fec1000
(XEN)     l3_index = 2
(XEN)     l3[2] = 13ccbe003
(XEN)     l2 = ffff83013ccbe000
(XEN)     l2_index = 1fa
(XEN)     l2[1fa] = 13cac3003
(XEN)     l1 = ffff83013cac3000
(XEN)     l1_index = 178
(XEN)     l1[178] = 0
(XEN)     l1[178] not present
(XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] fault addr 
bf578000, iommu reg = ffff82c3fff57000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf578
(XEN)     root_entry = ffff83013ff36000
(XEN)     root_entry[0] = 13c6bb001
(XEN)     context = ffff83013c6bb000
(XEN)     context[fa] = 2_13fec4001
(XEN)     l4 = ffff83013fec4000
(XEN)     l4_index = 0
(XEN)     l4[0] = 13fec1003
(XEN)     l3 = ffff83013fec1000
(XEN)     l3_index = 2
(XEN)     l3[2] = 13ccbe003
(XEN)     l2 = ffff83013ccbe000
(XEN)     l2_index = 1fa
(XEN)     l2[1fa] = 13cac3003
(XEN)     l1 = ffff83013cac3000
(XEN)     l1_index = 178
(XEN)     l1[178] = 0
(XEN)     l1[178] not present
(XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] fault addr 
bf57b000, iommu reg = ffff82c3fff57000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf57b
(XEN)     root_entry = ffff83013ff36000
(XEN)     root_entry[0] = 13c6bb001
(XEN)     context = ffff83013c6bb000
(XEN)     context[fa] = 2_13fec4001
(XEN)     l4 = ffff83013fec4000
(XEN)     l4_index = 0
(XEN)     l4[0] = 13fec1003
(XEN)     l3 = ffff83013fec1000
(XEN)     l3_index = 2
(XEN)     l3[2] = 13ccbe003
(XEN)     l2 = ffff83013ccbe000
(XEN)     l2_index = 1fa
(XEN)     l2[1fa] = 13cac3003
(XEN)     l1 = ffff83013cac3000
(XEN)     l1_index = 17b
(XEN)     l1[17b] = 0
(XEN)     l1[17b] not present
(XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] fault addr 
bf57b000, iommu reg = ffff82c3fff57000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf57b
(XEN)     root_entry = ffff83013ff36000
(XEN)     root_entry[0] = 13c6bb001
(XEN)     context = ffff83013c6bb000
(XEN)     context[fa] = 2_13fec4001
(XEN)     l4 = ffff83013fec4000
(XEN)     l4_index = 0
(XEN)     l4[0] = 13fec1003
(XEN)     l3 = ffff83013fec1000
(XEN)     l3_index = 2
(XEN)     l3[2] = 13ccbe003
(XEN)     l2 = ffff83013ccbe000
(XEN)     l2_index = 1fa
(XEN)     l2[1fa] = 13cac3003
(XEN)     l1 = ffff83013cac3000
(XEN)     l1_index = 17b
(XEN)     l1[17b] = 0
(XEN)     l1[17b] not present
 md0:(XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] fault addr 
bf57b000, iommu reg = ffff82c3fff57000
(XEN) DMAR:[fault reason 06h] PTE Read access is not set
(XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf57b
(XEN)     root_entry = ffff83013ff36000
(XEN)     root_entry[0] = 13c6bb001
(XEN)     context = ffff83013c6bb000
(XEN)     context[fa] = 2_13fec4001
(XEN)     l4 = ffff83013fec4000
(XEN)     l4_index = 0
(XEN)     l4[0] = 13fec1003
(XEN)     l3 = ffff83013fec1000
(XEN)     l3_index = 2
(XEN)     l3[2] = 13ccbe003
(XEN)     l2 = ffff83013ccbe000
(XEN)     l2_index = 1fa
(XEN)     l2[1fa] = 13cac3003
(XEN)     l1 = ffff83013cac3000
(XEN)     l1_index = 17b
(XEN)     l1[17b] = 0
(XEN)     l1[17b] not present

ata2.00: exception Emask 0x60 SAct 0x1 SErr 0x800 action 0x6 frozen
ata2.00: irq_stat 0x20000000, host bus error
ata2: SError: { HostInt }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/80:00:c3:aa:a0/00:00:0c:00:00/40 tag 0 ncq 65536 out
         res 40/00:04:c3:aa:a0/00:00:0c:00:00/40 Emask 0x60 (host bus error)
ata2.00: status: { DRDY }
ata2: hard resetting link
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
(XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] fault addr 
bf57b000, iommu reg = ffff82c3fff57000
(XEN) DMAR:[fault reason 06h] PTE Read access is not set
(XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf57b
(XEN)     root_entry = ffff83013ff36000
(XEN)     root_entry[0] = 13c6bb001
(XEN)     context = ffff83013c6bb000
(XEN)     context[fa] = 2_13fec4001
(XEN)     l4 = ffff83013fec4000
(XEN)     l4_index = 0
(XEN)     l4[0] = 13fec1003
(XEN)     l3 = ffff83013fec1000
(XEN)     l3_index = 2
(XEN)     l3[2] = 13ccbe003
(XEN)     l2 = ffff83013ccbe000
(XEN)     l2_index = 1fa
(XEN)     l2[1fa] = 13cac3003
(XEN)     l1 = ffff83013cac3000
(XEN)     l1_index = 17b
(XEN)     l1[17b] = 0
(XEN)     l1[17b] not present
ata2.00: exception Emask 0x60 SAct 0x1 SErr 0x800 action 0x6 frozen
ata2.00: irq_stat 0x20000000, host bus error
ata2: SError: { HostInt }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/80:00:c3:aa:a0/00:00:0c:00:00/40 tag 0 ncq 65536 out
         res 40/00:04:c3:aa:a0/00:00:0c:00:00/40 Emask 0x60 (host bus error)
ata2.00: status: { DRDY }
ata2: hard resetting link
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
(XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] fault addr 
bf57b000, iommu reg = ffff82c3fff57000
(XEN) DMAR:[fault reason 06h] PTE Read access is not set
(XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf57b
(XEN)     root_entry = ffff83013ff36000
(XEN)     root_entry[0] = 13c6bb001
(XEN)     context = ffff83013c6bb000
(XEN)     context[fa] = 2_13fec4001
(XEN)     l4 = ffff83013fec4000
(XEN)     l4_index = 0
(XEN)     l4[0] = 13fec1003
(XEN)     l3 = ffff83013fec1000
(XEN)     l3_index = 2
(XEN)     l3[2] = 13ccbe003
(XEN)     l2 = ffff83013ccbe000
(XEN)     l2_index = 1fa
(XEN)     l2[1fa] = 13cac3003
(XEN)     l1 = ffff83013cac3000
(XEN)     l1_index = 17b
(XEN)     l1[17b] = 0
(XEN)     l1[17b] not present
ata2.00: exception Emask 0x60 SAct 0x1 SErr 0x800 action 0x6 frozen
ata2.00: irq_stat 0x20000000, host bus error
ata2: SError: { HostInt }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/80:00:c3:aa:a0/00:00:0c:00:00/40 tag 0 ncq 65536 out
         res 40/00:04:c3:aa:a0/00:00:0c:00:00/40 Emask 0x60 (host bus error)
ata2.00: status: { DRDY }
ata2: hard resetting link
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
(XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] fault addr 
bf57b000, iommu reg = ffff82c3fff57000
(XEN) DMAR:[fault reason 06h] PTE Read access is not set
(XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf57b
(XEN)     root_entry = ffff83013ff36000
(XEN)     root_entry[0] = 13c6bb001
(XEN)     context = ffff83013c6bb000
(XEN)     context[fa] = 2_13fec4001
(XEN)     l4 = ffff83013fec4000
(XEN)     l4_index = 0
(XEN)     l4[0] = 13fec1003
(XEN)     l3 = ffff83013fec1000
(XEN)     l3_index = 2
(XEN)     l3[2] = 13ccbe003
(XEN)     l2 = ffff83013ccbe000
(XEN)     l2_index = 1fa
(XEN)     l2[1fa] = 13cac3003
(XEN)     l1 = ffff83013cac3000
(XEN)     l1_index = 17b
(XEN)     l1[17b] = 0
(XEN)     l1[17b] not present
ata2.00: exception Emask 0x60 SAct 0x1 SErr 0x800 action 0x6 frozen
ata2.00: irq_stat 0x20000000, host bus error
ata2: SError: { HostInt }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/80:00:c3:aa:a0/00:00:0c:00:00/40 tag 0 ncq 65536 out
         res 40/00:04:c3:aa:a0/00:00:0c:00:00/40 Emask 0x60 (host bus error)
ata2.00: status: { DRDY }
ata2: hard resetting link
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
(XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] fault addr 
bf57b000, iommu reg = ffff82c3fff57000
(XEN) DMAR:[fault reason 06h] PTE Read access is not set
(XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf57b
(XEN)     root_entry = ffff83013ff36000
(XEN)     root_entry[0] = 13c6bb001
(XEN)     context = ffff83013c6bb000
(XEN)     context[fa] = 2_13fec4001
(XEN)     l4 = ffff83013fec4000
(XEN)     l4_index = 0
(XEN)     l4[0] = 13fec1003
(XEN)     l3 = ffff83013fec1000
(XEN)     l3_index = 2
(XEN)     l3[2] = 13ccbe003
(XEN)     l2 = ffff83013ccbe000
(XEN)     l2_index = 1fa
(XEN)     l2[1fa] = 13cac3003
(XEN)     l1 = ffff83013cac3000
(XEN)     l1_index = 17b
(XEN)     l1[17b] = 0
(XEN)     l1[17b] not present
ata2.00: exception Emask 0x60 SAct 0x1 SErr 0x800 action 0x6 frozen
ata2.00: irq_stat 0x20000000, host bus error
ata2: SError: { HostInt }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/80:00:c3:aa:a0/00:00:0c:00:00/40 tag 0 ncq 65536 out
         res 40/00:04:c3:aa:a0/00:00:0c:00:00/40 Emask 0x60 (host bus error)
ata2.00: status: { DRDY }
ata2: hard resetting link
hub 2-0:1.0: hub_suspend
usb usb2: bus auto-suspend
ehci_hcd 0000:00:1d.0: suspend root hub
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
(XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] fault addr 
bf57b000, iommu reg = ffff82c3fff57000
(XEN) DMAR:[fault reason 06h] PTE Read access is not set
(XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf57b
(XEN)     root_entry = ffff83013ff36000
(XEN)     root_entry[0] = 13c6bb001
(XEN)     context = ffff83013c6bb000
(XEN)     context[fa] = 2_13fec4001
(XEN)     l4 = ffff83013fec4000
(XEN)     l4_index = 0
(XEN)     l4[0] = 13fec1003
(XEN)     l3 = ffff83013fec1000
(XEN)     l3_index = 2
(XEN)     l3[2] = 13ccbe003
(XEN)     l2 = ffff83013ccbe000
(XEN)     l2_index = 1fa
(XEN)     l2[1fa] = 13cac3003
(XEN)     l1 = ffff83013cac3000
(XEN)     l1_index = 17b
(XEN)     l1[17b] = 0
(XEN)     l1[17b] not present
ata2.00: exception Emask 0x60 SAct 0x1 SErr 0x800 action 0x6 frozen
ata2.00: irq_stat 0x20000000, host bus error
ata2: SError: { HostInt }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/80:00:c3:aa:a0/00:00:0c:00:00/40 tag 0 ncq 65536 out
         res 40/00:04:c3:aa:a0/00:00:0c:00:00/40 Emask 0x60 (host bus error)
ata2.00: status: { DRDY }
ata2: hard resetting link
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 1:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
        0c a0 aa c3
sd 1:0:0:0: [sdb] Add. Sense: No additional sense information
sd 1:0:0:0: [sdb] CDB: Write(10): 2a 00 0c a0 aa c3 00 00 80 00
end_request: I/O error, dev sdb, sector 211856067
raid10: Disk failure on sdb3, disabling device.
raid10: Operation continuing on 3 devices.
ata2: EH complete
 unknown partition table
md: md0: resync done.
md: checkpointing resync of md0.
RAID10 conf printout:
 --- wd:3 rd:4
 disk 0, wo:0, o:1, dev:sda3
 disk 1, wo:1, o:0, dev:sdb3
 disk 2, wo:0, o:1, dev:sdc3
 disk 3, wo:0, o:1, dev:sdd3
RAID10 conf printout:
 --- wd:3 rd:4
 disk 0, wo:0, o:1, dev:sda3
 disk 2, wo:0, o:1, dev:sdc3
 disk 3, wo:0, o:1, dev:sdd3
md: resync of RAID array md0
md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) 
for resync.
md: using 128k window, over a total of 819199872 blocks.
md: resuming resync of md0 from checkpoint.
(XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] fault addr 
bf578000, iommu reg = ffff82c3fff57000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf578
(XEN)     root_entry = ffff83013ff36000
(XEN)     root_entry[0] = 13c6bb001
(XEN)     context = ffff83013c6bb000
(XEN)     context[fa] = 2_13fec4001
(XEN)     l4 = ffff83013fec4000
(XEN)     l4_index = 0
(XEN)     l4[0] = 13fec1003
(XEN)     l3 = ffff83013fec1000
(XEN)     l3_index = 2
(XEN)     l3[2] = 13ccbe003
(XEN)     l2 = ffff83013ccbe000
(XEN)     l2_index = 1fa
(XEN)     l2[1fa] = 13cac3003
(XEN)     l1 = ffff83013cac3000
(XEN)     l1_index = 178
(XEN)     l1[178] = 0
(XEN)     l1[178] not present
(XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] fault addr 
bf579000, iommu reg = ffff82c3fff57000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf579
(XEN)     root_entry = ffff83013ff36000
(XEN)     root_entry[0] = 13c6bb001
(XEN)     context = ffff83013c6bb000
(XEN)     context[fa] = 2_13fec4001
(XEN)     l4 = ffff83013fec4000
(XEN)     l4_index = 0
(XEN)     l4[0] = 13fec1003
(XEN)     l3 = ffff83013fec1000
(XEN)     l3_index = 2
(XEN)     l3[2] = 13ccbe003
(XEN)     l2 = ffff83013ccbe000
(XEN)     l2_index = 1fa
(XEN)     l2[1fa] = 13cac3003
(XEN)     l1 = ffff83013cac3000
(XEN)     l1_index = 179
(XEN)     l1[179] = 0
(XEN)     l1[179] not present
(XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] fault addr 
bf57b000, iommu reg = ffff82c3fff57000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf57b
(XEN)     root_entry = ffff83013ff36000
(XEN)     root_entry[0] = 13c6bb001
(XEN)     context = ffff83013c6bb000
(XEN)     context[fa] = 2_13fec4001
(XEN)     l4 = ffff83013fec4000
(XEN)     l4_index = 0
(XEN)     l4[0] = 13fec1003
(XEN)     l3 = ffff83013fec1000
(XEN)     l3_index = 2
(XEN)     l3[2] = 13ccbe003
(XEN)     l2 = ffff83013ccbe000
(XEN)     l2_index = 1fa
(XEN)     l2[1fa] = 13cac3003
(XEN)     l1 = ffff83013cac3000
(XEN)     l1_index = 17b
(XEN)     l1[17b] = 0
(XEN)     l1[17b] not present
(XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] fault addr 
bf57b000, iommu reg = ffff82c3fff57000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf57b
(XEN)     root_entry = ffff83013ff36000
(XEN)     root_entry[0] = 13c6bb001
(XEN)     context = ffff83013c6bb000
(XEN)     context[fa] = 2_13fec4001
(XEN)     l4 = ffff83013fec4000
(XEN)     l4_index = 0
(XEN)     l4[0] = 13fec1003
(XEN)     l3 = ffff83013fec1000
(XEN)     l3_index = 2
(XEN)     l3[2] = 13ccbe003
(XEN)     l2 = ffff83013ccbe000
(XEN)     l2_index = 1fa
(XEN)     l2[1fa] = 13cac3003
(XEN)     l1 = ffff83013cac3000
(XEN)     l1_index = 17b
(XEN)     l1[17b] = 0
(XEN)     l1[17b] not present
(XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] fault addr 
bf57b000, iommu reg = ffff82c3fff57000
(XEN) DMAR:[fault reason 06h] PTE Read access is not set
(XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf57b
(XEN)     root_entry = ffff83013ff36000
(XEN)     root_entry[0] = 13c6bb001
(XEN)     context = ffff83013c6bb000
(XEN)     context[fa] = 2_13fec4001
(XEN)     l4 = ffff83013fec4000
(XEN)     l4_index = 0
(XEN)     l4[0] = 13fec1003
(XEN)     l3 = ffff83013fec1000
(XEN)     l3_index = 2
(XEN)     l3[2] = 13ccbe003
(XEN)     l2 = ffff83013ccbe000
(XEN)     l2_index = 1fa
(XEN)     l2[1fa] = 13cac3003
(XEN)     l1 = ffff83013cac3000
(XEN)     l1_index = 17b
(XEN)     l1[17b] = 0
(XEN)     l1[17b] not present
ata4.00: exception Emask 0x60 SAct 0x1 SErr 0x800 action 0x6 frozen
ata4.00: irq_stat 0x20000000, host bus error
ata4: SError: { HostInt }
ata4.00: failed command: WRITE FPDMA QUEUED
ata4.00: cmd 61/80:00:43:b2:a1/00:00:0c:00:00/40 tag 0 ncq 65536 out
         res 40/00:04:43:b2:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error)
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: configured for UDMA/133
ata4: EH complete
(XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] fault addr 
bf578000, iommu reg = ffff82c3fff57000
(XEN) DMAR:[fault reason 06h] PTE Read access is not set
(XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf578
(XEN)     root_entry = ffff83013ff36000
(XEN)     root_entry[0] = 13c6bb001
(XEN)     context = ffff83013c6bb000
(XEN)     context[fa] = 2_13fec4001
(XEN)     l4 = ffff83013fec4000
(XEN)     l4_index = 0
(XEN)     l4[0] = 13fec1003
(XEN)     l3 = ffff83013fec1000
(XEN)     l3_index = 2
(XEN)     l3[2] = 13ccbe003
(XEN)     l2 = ffff83013ccbe000
(XEN)     l2_index = 1fa
(XEN)     l2[1fa] = 13cac3003
(XEN)     l1 = ffff83013cac3000
(XEN)     l1_index = 178
(XEN)     l1[178] = 0
(XEN)     l1[178] not present
ata4.00: exception Emask 0x60 SAct 0x3 SErr 0x800 action 0x6 frozen
ata4.00: irq_stat 0x20000000, host bus error
ata4: SError: { HostInt }
ata4.00: failed command: WRITE FPDMA QUEUED
ata4.00: cmd 61/80:00:43:b2:a1/00:00:0c:00:00/40 tag 0 ncq 65536 out
         res 40/00:0c:43:b1:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error)
ata4.00: status: { DRDY }
ata4.00: failed command: WRITE FPDMA QUEUED
ata4.00: cmd 61/80:08:43:b1:a1/00:00:0c:00:00/40 tag 1 ncq 65536 out
         res 40/00:0c:43:b1:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error)
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: configured for UDMA/133
ata4: EH complete
(XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] fault addr 
bf578000, iommu reg = ffff82c3fff57000
(XEN) DMAR:[fault reason 06h] PTE Read access is not set
(XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf578
(XEN)     root_entry = ffff83013ff36000
(XEN)     root_entry[0] = 13c6bb001
(XEN)     context = ffff83013c6bb000
(XEN)     context[fa] = 2_13fec4001
(XEN)     l4 = ffff83013fec4000
(XEN)     l4_index = 0
(XEN)     l4[0] = 13fec1003
(XEN)     l3 = ffff83013fec1000
(XEN)     l3_index = 2
(XEN)     l3[2] = 13ccbe003
(XEN)     l2 = ffff83013ccbe000
(XEN)     l2_index = 1fa
(XEN)     l2[1fa] = 13cac3003
(XEN)     l1 = ffff83013cac3000
(XEN)     l1_index = 178
(XEN)     l1[178] = 0
(XEN)     l1[178] not present
ata4.00: exception Emask 0x60 SAct 0x3 SErr 0x800 action 0x6 frozen
ata4.00: irq_stat 0x20000000, host bus error
ata4: SError: { HostInt }
ata4.00: failed command: WRITE FPDMA QUEUED
ata4.00: cmd 61/80:00:43:b1:a1/00:00:0c:00:00/40 tag 0 ncq 65536 out
         res 40/00:0c:43:b2:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error)
ata4.00: status: { DRDY }
ata4.00: failed command: WRITE FPDMA QUEUED
ata4.00: cmd 61/80:08:43:b2:a1/00:00:0c:00:00/40 tag 1 ncq 65536 out
         res 40/00:0c:43:b2:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error)
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: configured for UDMA/133
ata4: EH complete
(XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] fault addr 
bf578000, iommu reg = ffff82c3fff57000
(XEN) DMAR:[fault reason 06h] PTE Read access is not set
(XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf578
(XEN)     root_entry = ffff83013ff36000
(XEN)     root_entry[0] = 13c6bb001
(XEN)     context = ffff83013c6bb000
(XEN)     context[fa] = 2_13fec4001
(XEN)     l4 = ffff83013fec4000
(XEN)     l4_index = 0
(XEN)     l4[0] = 13fec1003
(XEN)     l3 = ffff83013fec1000
(XEN)     l3_index = 2
(XEN)     l3[2] = 13ccbe003
(XEN)     l2 = ffff83013ccbe000
(XEN)     l2_index = 1fa
(XEN)     l2[1fa] = 13cac3003
(XEN)     l1 = ffff83013cac3000
(XEN)     l1_index = 178
(XEN)     l1[178] = 0
(XEN)     l1[178] not present
ata4.00: exception Emask 0x60 SAct 0x3f SErr 0x800 action 0x6 frozen
ata4.00: irq_stat 0x20000000, host bus error
ata4: SError: { HostInt }
ata4.00: failed command: WRITE FPDMA QUEUED
ata4.00: cmd 61/80:00:43:b2:a1/00:00:0c:00:00/40 tag 0 ncq 65536 out
         res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host bus error)
ata4.00: status: { DRDY }
ata4.00: failed command: WRITE FPDMA QUEUED
ata4.00: cmd 61/80:08:43:b1:a1/00:00:0c:00:00/40 tag 1 ncq 65536 out
         res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host bus error)
ata4.00: status: { DRDY }
ata4.00: failed command: READ FPDMA QUEUED
ata4.00: cmd 60/00:10:43:2d:a2/04:00:0c:00:00/40 tag 2 ncq 524288 in
         res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host bus error)
ata4.00: status: { DRDY }
ata4.00: failed command: READ FPDMA QUEUED
ata4.00: cmd 60/00:18:43:31:a2/04:00:0c:00:00/40 tag 3 ncq 524288 in
         res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host bus error)
ata4.00: status: { DRDY }
ata4.00: failed command: READ FPDMA QUEUED
ata4.00: cmd 60/00:20:43:35:a2/04:00:0c:00:00/40 tag 4 ncq 524288 in
         res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host bus error)
ata4.00: status: { DRDY }
ata4.00: failed command: READ FPDMA QUEUED
ata4.00: cmd 60/00:28:43:39:a2/04:00:0c:00:00/40 tag 5 ncq 524288 in
         res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host bus error)
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: configured for UDMA/133
ata4: EH complete
(XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] fault addr 
bf578000, iommu reg = ffff82c3fff57000
(XEN) DMAR:[fault reason 06h] PTE Read access is not set
(XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf578
(XEN)     root_entry = ffff83013ff36000
(XEN)     root_entry[0] = 13c6bb001
(XEN)     context = ffff83013c6bb000
(XEN)     context[fa] = 2_13fec4001
(XEN)     l4 = ffff83013fec4000
(XEN)     l4_index = 0
(XEN)     l4[0] = 13fec1003
(XEN)     l3 = ffff83013fec1000
(XEN)     l3_index = 2
(XEN)     l3[2] = 13ccbe003
(XEN)     l2 = ffff83013ccbe000
(XEN)     l2_index = 1fa
(XEN)     l2[1fa] = 13cac3003
(XEN)     l1 = ffff83013cac3000
(XEN)     l1_index = 178
(XEN)     l1[178] = 0
(XEN)     l1[178] not present
ata4.00: exception Emask 0x60 SAct 0x3f SErr 0x800 action 0x6 frozen
ata4.00: irq_stat 0x20000000, host bus error
ata4: SError: { HostInt }
ata4.00: failed command: READ FPDMA QUEUED
ata4.00: cmd 60/00:00:43:39:a2/04:00:0c:00:00/40 tag 0 ncq 524288 in
         res 40/00:2c:43:b2:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error)
ata4.00: status: { DRDY }
ata4.00: failed command: READ FPDMA QUEUED
ata4.00: cmd 60/00:08:43:35:a2/04:00:0c:00:00/40 tag 1 ncq 524288 in
         res 40/00:2c:43:b2:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error)
ata4.00: status: { DRDY }
ata4.00: failed command: READ FPDMA QUEUED
ata4.00: cmd 60/00:10:43:31:a2/04:00:0c:00:00/40 tag 2 ncq 524288 in
         res 40/00:2c:43:b2:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error)
ata4.00: status: { DRDY }
ata4.00: failed command: READ FPDMA QUEUED
ata4.00: cmd 60/00:18:43:2d:a2/04:00:0c:00:00/40 tag 3 ncq 524288 in
         res 40/00:2c:43:b2:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error)
ata4.00: status: { DRDY }
ata4.00: failed command: WRITE FPDMA QUEUED
ata4.00: cmd 61/80:20:43:b1:a1/00:00:0c:00:00/40 tag 4 ncq 65536 out
         res 40/00:2c:43:b2:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error)
ata4.00: status: { DRDY }
ata4.00: failed command: WRITE FPDMA QUEUED
ata4.00: cmd 61/80:28:43:b2:a1/00:00:0c:00:00/40 tag 5 ncq 65536 out
         res 40/00:2c:43:b2:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error)
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: configured for UDMA/133
ata4: EH complete
(XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] fault addr 
bf578000, iommu reg = ffff82c3fff57000
(XEN) DMAR:[fault reason 06h] PTE Read access is not set
(XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf578
(XEN)     root_entry = ffff83013ff36000
(XEN)     root_entry[0] = 13c6bb001
(XEN)     context = ffff83013c6bb000
(XEN)     context[fa] = 2_13fec4001
(XEN)     l4 = ffff83013fec4000
(XEN)     l4_index = 0
(XEN)     l4[0] = 13fec1003
(XEN)     l3 = ffff83013fec1000
(XEN)     l3_index = 2
(XEN)     l3[2] = 13ccbe003
(XEN)     l2 = ffff83013ccbe000
(XEN)     l2_index = 1fa
(XEN)     l2[1fa] = 13cac3003
(XEN)     l1 = ffff83013cac3000
(XEN)     l1_index = 178
(XEN)     l1[178] = 0
(XEN)     l1[178] not present
ata4.00: exception Emask 0x60 SAct 0x3f SErr 0x800 action 0x6 frozen
ata4.00: irq_stat 0x20000000, host bus error
ata4: SError: { HostInt }
ata4.00: failed command: WRITE FPDMA QUEUED
ata4.00: cmd 61/80:00:43:b2:a1/00:00:0c:00:00/40 tag 0 ncq 65536 out
         res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host bus error)
ata4.00: status: { DRDY }
ata4.00: failed command: WRITE FPDMA QUEUED
ata4.00: cmd 61/80:08:43:b1:a1/00:00:0c:00:00/40 tag 1 ncq 65536 out
         res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host bus error)
ata4.00: status: { DRDY }
ata4.00: failed command: READ FPDMA QUEUED
ata4.00: cmd 60/00:10:43:2d:a2/04:00:0c:00:00/40 tag 2 ncq 524288 in
         res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host bus error)
ata4.00: status: { DRDY }
ata4.00: failed command: READ FPDMA QUEUED
ata4.00: cmd 60/00:18:43:31:a2/04:00:0c:00:00/40 tag 3 ncq 524288 in
         res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host bus error)
ata4.00: status: { DRDY }
ata4.00: failed command: READ FPDMA QUEUED
ata4.00: cmd 60/00:20:43:35:a2/04:00:0c:00:00/40 tag 4 ncq 524288 in
         res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host bus error)
ata4.00: status: { DRDY }
ata4.00: failed command: READ FPDMA QUEUED
ata4.00: cmd 60/00:28:43:39:a2/04:00:0c:00:00/40 tag 5 ncq 524288 in
         res 40/00:2c:43:39:a2/00:00:0c:00:00/40 Emask 0x60 (host bus error)
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: configured for UDMA/133
sd 3:0:0:0: [sdd] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 3:0:0:0: [sdd] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
        0c a2 39 43
sd 3:0:0:0: [sdd] Add. Sense: No additional sense information
sd 3:0:0:0: [sdd] CDB: Write(10): 2a 00 0c a1 b2 43 00 00 80 00
end_request: I/O error, dev sdd, sector 211923523
raid10: Disk failure on sdd3, disabling device.
raid10: Operation continuing on 2 devices.
ata4: EH complete
md: md0: resync done.
(XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:796: DMAR:[DMA Read] Request device [00:1f.2] fault addr 
bf578000, iommu reg = ffff82c3fff57000
(XEN) DMAR:[fault reason 06h] PTE Read access is not set
(XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = bf578
(XEN)     root_entry = ffff83013ff36000
(XEN)     root_entry[0] = 13c6bb001
(XEN)     context = ffff83013c6bb000
(XEN)     context[fa] = 2_13fec4001
(XEN)     l4 = ffff83013fec4000
(XEN)     l4_index = 0
(XEN)     l4[0] = 13fec1003
(XEN)     l3 = ffff83013fec1000
(XEN)     l3_index = 2
(XEN)     l3[2] = 13ccbe003
(XEN)     l2 = ffff83013ccbe000
(XEN)     l2_index = 1fa
(XEN)     l2[1fa] = 13cac3003
(XEN)     l1 = ffff83013cac3000
(XEN)     l1_index = 178
(XEN)     l1[178] = 0
(XEN)     l1[178] not present
ata4.00: exception Emask 0x60 SAct 0x1f SErr 0x800 action 0x6 frozen
ata4.00: irq_stat 0x20000000, host bus error
ata4: SError: { HostInt }
ata4.00: failed command: READ FPDMA QUEUED
ata4.00: cmd 60/00:00:43:39:a2/04:00:0c:00:00/40 tag 0 ncq 524288 in
         res 40/00:24:43:b1:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error)
ata4.00: status: { DRDY }
ata4.00: failed command: READ FPDMA QUEUED
ata4.00: cmd 60/00:08:43:35:a2/04:00:0c:00:00/40 tag 1 ncq 524288 in
         res 40/00:24:43:b1:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error)
ata4.00: status: { DRDY }
ata4.00: failed command: READ FPDMA QUEUED
ata4.00: cmd 60/00:10:43:31:a2/04:00:0c:00:00/40 tag 2 ncq 524288 in
         res 40/00:24:43:b1:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error)
ata4.00: status: { DRDY }
ata4.00: failed command: READ FPDMA QUEUED
ata4.00: cmd 60/00:18:43:2d:a2/04:00:0c:00:00/40 tag 3 ncq 524288 in
         res 40/00:24:43:b1:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error)
ata4.00: status: { DRDY }
ata4.00: failed command: WRITE FPDMA QUEUED
ata4.00: cmd 61/80:20:43:b1:a1/00:00:0c:00:00/40 tag 4 ncq 65536 out
         res 40/00:24:43:b1:a1/00:00:0c:00:00/40 Emask 0x60 (host bus error)
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: configured for UDMA/133
sd 3:0:0:0: [sdd] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 3:0:0:0: [sdd] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
        0c a1 b1 43
sd 3:0:0:0: [sdd] Add. Sense: No additional sense information
sd 3:0:0:0: [sdd] CDB: Write(10): 2a 00 0c a1 b1 43 00 00 80 00
end_request: I/O error, dev sdd, sector 211923267
ata4: EH complete
md: checkpointing resync of md0.
RAID10 conf printout:
 --- wd:2 rd:4
 disk 0, wo:0, o:1, dev:sda3
 disk 2, wo:0, o:1, dev:sdc3
 disk 3, wo:1, o:0, dev:sdd3
RAID10 conf printout:
 --- wd:2 rd:4
 disk 0, wo:0, o:1, dev:sda3
 disk 2, wo:0, o:1, dev:sdc3
md: resync of RAID array md0
md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) 
for resync.
md: using 128k window, over a total of 819199872 blocks.
md: resuming resync of md0 from checkpoint.
md: md0: resync done.
RAID10 conf printout:
 --- wd:2 rd:4
 disk 0, wo:0, o:1, dev:sda3
 disk 2, wo:0, o:1, dev:sdc3




=========================================================================


 __  __            _  _    _                    _        _     _
 \ \/ /___ _ __   | || |  / |   _   _ _ __  ___| |_ __ _| |__ | | ___
  \  // _ \ '_ \  | || |_ | |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \
  /  \  __/ | | | |__   _|| |__| |_| | | | \__ \ || (_| | |_) | |  __/
 /_/\_\___|_| |_|    |_|(_)_|   \__,_|_| |_|___/\__\__,_|_.__/|_|\___|

(XEN) Xen version 4.1-unstable (jeremy@) (gcc version 4.4.3 20100127 (Red Hat 
4.4.3-4) (GCC) ) Tue Apr  6 17:23:29 PDT 2010
(XEN) Latest ChangeSet: Tue Apr 06 17:23:12 2010 -0700 21115:ea6c67dc4577
(XEN) Command line: com2=115200,8n1,0x3e8,5 console=com2,vga cpufreq=xen 
iommu=verbose
(XEN) Video information:
(XEN)  VGA is text mode 80x25, font 8x16
(XEN)  VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN)  EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN)  Found 4 MBR signatures
(XEN)  Found 4 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN)  0000000000000000 - 000000000009d800 (usable)
(XEN)  000000000009d800 - 00000000000a0000 (reserved)
(XEN)  00000000000e0000 - 0000000000100000 (reserved)
(XEN)  0000000000100000 - 00000000bf790000 (usable)
(XEN)  00000000bf79e000 - 00000000bf7a0000 type 9
(XEN)  00000000bf7a0000 - 00000000bf7ae000 (ACPI data)
(XEN)  00000000bf7ae000 - 00000000bf7d0000 (ACPI NVS)
(XEN)  00000000bf7d0000 - 00000000bf7e0000 (reserved)
(XEN)  00000000bf7ed000 - 00000000c0000000 (reserved)
(XEN)  00000000e0000000 - 00000000f0000000 (reserved)
(XEN)  00000000fed20000 - 00000000fed40000 (reserved)
(XEN)  00000000fee00000 - 00000000fee01000 (reserved)
(XEN)  0000000100000000 - 0000000140000000 (usable)
(XEN) ACPI: RSDP 000FA110, 0024 (r2 ACPIAM)
(XEN) ACPI: XSDT BF7A0100, 0084 (r1 SMCI            20100225 MSFT       97)
(XEN) ACPI: FACP BF7A0290, 00F4 (r4 022510 FACP1918 20100225 MSFT       97)
(XEN) ACPI: DSDT BF7A05F0, 6C55 (r2  10605 10605000        0 INTL 20051117)
(XEN) ACPI: FACS BF7AE000, 0040
(XEN) ACPI: APIC BF7A0390, 0092 (r2 022510 APIC1918 20100225 MSFT       97)
(XEN) ACPI: MCFG BF7A0430, 003C (r1 022510 OEMMCFG  20100225 MSFT       97)
(XEN) ACPI: OEMB BF7AE040, 0073 (r1 022510 OEMB1918 20100225 MSFT       97)
(XEN) ACPI: HPET BF7AA5F0, 0038 (r1 022510 OEMHPET  20100225 MSFT       97)
(XEN) ACPI: GSCI BF7AE0C0, 2024 (r1 022510 GMCHSCI  20100225 MSFT       97)
(XEN) ACPI: DMAR BF7B00F0, 0090 (r1    AMI  OEMDMAR        1 MSFT       97)
(XEN) ACPI: SSDT BF7B1580, 0363 (r1 DpgPmm    CpuPm       12 INTL 20051117)
(XEN) ACPI: EINJ BF7AA630, 0130 (r1  AMIER AMI_EINJ 20100225 MSFT       97)
(XEN) ACPI: BERT BF7AA7C0, 0030 (r1  AMIER AMI_BERT 20100225 MSFT       97)
(XEN) ACPI: ERST BF7AA7F0, 01B0 (r1  AMIER AMI_ERST 20100225 MSFT       97)
(XEN) ACPI: HEST BF7AA9A0, 00A8 (r1  AMIER ABC_HEST 20100225 MSFT       97)
(XEN) System RAM: 4056MB (4153584kB)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-0000000140000000
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000ff780
(XEN) DMI present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x808
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0]
(XEN) ACPI:                  wakeup_vec[bf7ae00c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
(XEN) Processor #2 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
(XEN) Processor #4 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
(XEN) Processor #6 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
(XEN) ACPI: IOAPIC (id[0x07] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 7, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode:  Flat.  Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000
(XEN) [VT-D]dmar.c:679: Host address width 36
(XEN) [VT-D]dmar.c:694: found ACPI_DMAR_DRHD:
(XEN) [VT-D]dmar.c:398:   dmaru->address = fed90000
(XEN) [VT-D]dmar.c:411:   flags: INCLUDE_ALL
(XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR:
(XEN) [VT-D]dmar.c:334:   endpoint: 0:1d.0
(XEN) [VT-D]dmar.c:334:   endpoint: 0:1a.0
(XEN) [VT-D]dmar.c:571:   RMRR region: base_addr ed000 end_address effff
(XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR:
(XEN) [VT-D]dmar.c:334:   endpoint: 0:1d.0
(XEN) [VT-D]dmar.c:334:   endpoint: 0:1a.0
(XEN) [VT-D]dmar.c:571:   RMRR region: base_addr bf7ed000 end_address bf7fffff
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
(XEN) PCI: MCFG area at e0000000 reserved in E820
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2400.063 MHz processor.
(XEN) Initing memory sharing.
(XEN) EPT support 2M super page.
(XEN) VMX: Supported advanced features:
(XEN)  - APIC MMIO access virtualisation
(XEN)  - APIC TPR shadow
(XEN)  - Extended Page Tables (EPT)
(XEN)  - Virtual-Processor Identifiers (VPID)
(XEN)  - Virtual NMI
(XEN)  - MSR direct-access bitmap
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging detected.
(XEN) Intel machine check reporting enabled
(XEN) [VT-D]iommu.c:1078: drhd->address = fed90000 iommu->reg = ffff82c3fff57000
(XEN) [VT-D]iommu.c:1080: cap = c90780106f0462 ecap = f020e3
(XEN) Intel VT-d Snoop Control supported.
(XEN) Intel VT-d DMA Passthrough not supported.
(XEN) Intel VT-d Queued Invalidation supported.
(XEN) Intel VT-d Interrupt Remapping not supported.
(XEN) I/O virtualisation enabled
(XEN) I/O virtualisation for PV guests disabled
(XEN) EPT support 2M super page.
(XEN) EPT support 2M super page.
(XEN) EPT support 2M super page.
(XEN) Total of 4 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN)  ->  Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) TSC is reliable, synchronization unnecessary
(XEN) Platform timer is 14.318MHz HPET
�(XEN) Allocated console ring of 32 KiB.
(XEN) microcode.c:73:d32767 microcode: CPU1 resumed
(XEN) microcode.c:73:d32767 microcode: CPU2 resumed
(XEN) Brought up 4 CPUs
(XEN) microcode.c:73:d32767 microcode: CPU3 resumed
(XEN) Turbo Mode detected!
(XEN) HPET: 8 timers in total, 8 timers will be used for broadcast
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:0.0
(XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:8.0
(XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:8.1
(XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:8.2
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:8.3
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:10.0
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:10.1
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1a.0
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1d.0
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1f.0
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1f.2
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1f.3
(XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 3:0.0
(XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 4:0.0
(XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 5:0.0
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 6:3.0
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 6:3.1
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 6:3.2
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 6:3.3
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 6:3.4
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 6:3.5
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 6:3.6
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 6:3.7
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:0.0
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:0.1
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:2.0
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:2.1
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:3.0
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:3.1
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:3.2
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:3.4
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:4.0
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:4.1
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:4.2
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:4.3
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:5.0
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:5.1
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:5.2
(XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:5.3
(XEN) [VT-D]iommu.c:695: iommu_enable_translation: iommu->reg = ffff82c3fff57000
(XEN) *** LOADING DOMAIN 0 ***
(XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0x69c000
(XEN) elf_parse_binary: phdr: paddr=0x169c000 memsz=0xe3cb0
(XEN) elf_parse_binary: phdr: paddr=0x1780000 memsz=0x888
(XEN) elf_parse_binary: phdr: paddr=0x1781000 memsz=0x14498
(XEN) elf_parse_binary: phdr: paddr=0x1796000 memsz=0x9f5000
(XEN) elf_parse_binary: memory: 0x1000000 ->  0x218b000
(XEN) elf_xen_parse_note: GUEST_OS = "linux"
(XEN) elf_xen_parse_note: GUEST_VERSION = "2.6"
(XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0"
(XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000
(XEN) elf_xen_parse_note: ENTRY = 0xffffffff81796200
(XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81009000
(XEN) elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb"
(XEN) elf_xen_parse_note: PAE_MODE = "yes"
(XEN) elf_xen_parse_note: LOADER = "generic"
(XEN) elf_xen_parse_note: unknown xen elf note (0xd)
(XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1
(XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000
(XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0
(XEN) elf_xen_addr_calc_check: addresses:
(XEN)     virt_base        = 0xffffffff80000000
(XEN)     elf_paddr_offset = 0x0
(XEN)     virt_offset      = 0xffffffff80000000
(XEN)     virt_kstart      = 0xffffffff81000000
(XEN)     virt_kend        = 0xffffffff8218b000
(XEN)     virt_entry       = 0xffffffff81796200
(XEN)     p2m_base         = 0xffffffffffffffff
(XEN)  Xen  kernel: 64-bit, lsb, compat32
(XEN)  Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 ->  0x218b000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN)  Dom0 alloc.:   0000000138000000->000000013c000000 (981633 pages to be 
allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN)  Loaded kernel: ffffffff81000000->ffffffff8218b000
(XEN)  Init. ramdisk: ffffffff8218b000->ffffffff82b69800
(XEN)  Phys-Mach map: ffffffff82b6a000->ffffffff83307408
(XEN)  Start info:    ffffffff83308000->ffffffff833084b4
(XEN)  Page tables:   ffffffff83309000->ffffffff83326000
(XEN)  Boot stack:    ffffffff83326000->ffffffff83327000
(XEN)  TOTAL:         ffffffff80000000->ffffffff83400000
(XEN)  ENTRY ADDRESS: ffffffff81796200
(XEN) Dom0 has maximum 4 VCPUs
(XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 ->  0xffffffff8169c000
(XEN) elf_load_binary: phdr 1 at 0xffffffff8169c000 ->  0xffffffff8177fcb0
(XEN) elf_load_binary: phdr 2 at 0xffffffff81780000 ->  0xffffffff81780888
(XEN) elf_load_binary: phdr 3 at 0xffffffff81781000 ->  0xffffffff81795498
(XEN) elf_load_binary: phdr 4 at 0xffffffff81796000 ->  0xffffffff81830000
(XEN) Scrubbing Free RAM: .done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input ->  DOM0 (type 'CTRL-a' three times to switch input to 
Xen)
(XEN) Freed 164kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32.11 (jeremy@xxxxxxxxxxxxxxx) (gcc version 4.4.3 20100127 
(Red Hat 4.4.3-4) (GCC) ) #7 SMP PREEMPT Mon Apr 5 14:58:54 PDT 2010
Command line: ro root=/dev/mapper/vg_lilith--raid-root  LANG=en_US.UTF-8 
SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us ignore_loglevel 
earlyprintk=xen console=hvc0 rdshell pcie_aspm=off
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
xen_release_chunk: looking at area pfn bf790-bf79e: 14 pages freed
xen_release_chunk: looking at area pfn bf7e0-bf7ed: 13 pages freed
xen_release_chunk: looking at area pfn c0000-e0000: 131072 pages freed
xen_release_chunk: looking at area pfn f0000-fec00: 14977 pages freed
xen_release_chunk: looking at area pfn fec01-fed20: 0 pages freed
xen_release_chunk: looking at area pfn fed40-fee00: 0 pages freed
released 146076 pages of unused memory
BIOS-provided physical RAM map:
 Xen: 0000000000000000 - 000000000009d800 (usable)
 Xen: 000000000009d800 - 0000000000100000 (reserved)
 Xen: 0000000000100000 - 00000000bf790000 (usable)
 Xen: 00000000bf79e000 - 00000000bf7a0000 type 9
 Xen: 00000000bf7a0000 - 00000000bf7ae000 (ACPI data)
 Xen: 00000000bf7ae000 - 00000000bf7d0000 (ACPI NVS)
 Xen: 00000000bf7d0000 - 00000000bf7e0000 (reserved)
 Xen: 00000000bf7ed000 - 00000000c0000000 (reserved)
 Xen: 00000000e0000000 - 00000000f0000000 (reserved)
 Xen: 00000000fec00000 - 00000000fec01000 (reserved)
 Xen: 00000000fed20000 - 00000000fed40000 (reserved)
 Xen: 00000000fee00000 - 00000000fee01000 (reserved)
debug: ignoring loglevel setting.
bootconsole [xenboot0] enabled
DMI present.
last_pfn = 0xbf790 max_arch_pfn = 0x400000000
x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000bf790000
 0000000000 - 00bf790000 page 4k
kernel direct mapping tables up to bf790000 @ 100000-700000
RAMDISK: 0218b000 - 02b69800
ACPI: RSDP 00000000000fa110 00024 (v02 ACPIAM)
ACPI: XSDT 00000000bf7a0100 00084 (v01 SMCI            20100225 MSFT 00000097)
ACPI: FACP 00000000bf7a0290 000F4 (v04 022510 FACP1918 20100225 MSFT 00000097)
ACPI: DSDT 00000000bf7a05f0 06C55 (v02  10605 10605000 00000000 INTL 20051117)
ACPI: FACS 00000000bf7ae000 00040
ACPI: APIC 00000000bf7a0390 00092 (v02 022510 APIC1918 20100225 MSFT 00000097)
ACPI: MCFG 00000000bf7a0430 0003C (v01 022510 OEMMCFG  20100225 MSFT 00000097)
ACPI: OEMB 00000000bf7ae040 00073 (v01 022510 OEMB1918 20100225 MSFT 00000097)
ACPI: HPET 00000000bf7aa5f0 00038 (v01 022510 OEMHPET  20100225 MSFT 00000097)
ACPI: GSCI 00000000bf7ae0c0 02024 (v01 022510 GMCHSCI  20100225 MSFT 00000097)
ACPI:      00000000bf7b00f0 00090 (v01    AMI  OEMDMAR 00000001 MSFT 00000097)
ACPI: SSDT 00000000bf7b1580 00363 (v01 DpgPmm    CpuPm 00000012 INTL 20051117)
ACPI: EINJ 00000000bf7aa630 00130 (v01  AMIER AMI_EINJ 20100225 MSFT 00000097)
ACPI: BERT 00000000bf7aa7c0 00030 (v01  AMIER AMI_BERT 20100225 MSFT 00000097)
ACPI: ERST 00000000bf7aa7f0 001B0 (v01  AMIER AMI_ERST 20100225 MSFT 00000097)
ACPI: HEST 00000000bf7aa9a0 000A8 (v01  AMIER ABC_HEST 20100225 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-00000000bf790000
Bootmem setup node 0 0000000000000000-00000000bf790000
  NODE_DATA [0000000000001000 - 0000000000005fff]
  bootmap [0000000000008000 -  000000000001fef7] pages 18
(8 early reservations) ==>  bootmem [0000000000 - 00bf790000]
  #0 [0000000000 - 0000001000]   BIOS data page ==>  [0000000000 - 0000001000]
  #1 [0003309000 - 0003326000]   XEN PAGETABLES ==>  [0003309000 - 0003326000]
  #2 [0000006000 - 0000008000]       TRAMPOLINE ==>  [0000006000 - 0000008000]
  #3 [0001000000 - 000216a048]    TEXT DATA BSS ==>  [0001000000 - 000216a048]
  #4 [000218b000 - 0002b69800]          RAMDISK ==>  [000218b000 - 0002b69800]
  #5 [0002b6a000 - 0003309000]   XEN START INFO ==>  [0002b6a000 - 0003309000]
  #6 [000216b000 - 000216b21b]              BRK ==>  [000216b000 - 000216b21b]
  #7 [0000100000 - 00006e0000]          PGTABLE ==>  [0000100000 - 00006e0000]
found SMP MP-table at [ffff8800000ff780] ff780
Zone PFN ranges:
  DMA      0x00000000 ->  0x00001000
  DMA32    0x00001000 ->  0x00100000
  Normal   0x00100000 ->  0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000000 ->  0x0000009d
    0: 0x00000100 ->  0x000bf790
On node 0 totalpages: 784173
  DMA zone: 88 pages used for memmap
  DMA zone: 1507 pages reserved
  DMA zone: 2402 pages, LIFO batch:0
  DMA32 zone: 16762 pages used for memmap
  DMA32 zone: 763414 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x07] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 7, version 0, address 0xfec00000, GSI 0-0
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ERROR: Unable to locate IOAPIC for GSI 2
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ERROR: Unable to locate IOAPIC for GSI 9
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 256
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 0000000000100000
Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
Booting paravirtualized kernel on Xen
Xen version: 4.1-unstable (preserve-AD) (dom0)
NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88000336d000 s83096 r8192 d23400 u114688
pcpu-alloc: s83096 r8192 d23400 u114688 alloc=28*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
trying to map vcpu_info 0 at ffff880003378020, mfn 13b378, offset 32
cpu 0 using vcpu_info at ffff880003378020
trying to map vcpu_info 1 at ffff880003394020, mfn 13b394, offset 32
cpu 1 using vcpu_info at ffff880003394020
trying to map vcpu_info 2 at ffff8800033b0020, mfn 13b3b0, offset 32
cpu 2 using vcpu_info at ffff8800033b0020
trying to map vcpu_info 3 at ffff8800033cc020, mfn 13b3cc, offset 32
cpu 3 using vcpu_info at ffff8800033cc020
Xen: using vcpu_info placement
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 765816
Policy zone: DMA32
Kernel command line: ro root=/dev/mapper/vg_lilith--raid-root  LANG=en_US.UTF-8 
SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us ignore_loglevel 
earlyprintk=xen console=hvc0 rdshell pcie_aspm=off
PCIe ASPM is disabled
PID hash table entries: 4096 (order: 3, 32768 bytes)
Initializing CPU#0
DMA: Placing 64MB software IO TLB between ffff88000794a000 - ffff88000b94a000
DMA: software IO TLB at phys 0x794a000 - 0xb94a000
xen_swiotlb_fixup: buf=ffff88000794a000 size=67108864
xen_swiotlb_fixup: buf=ffff88000b9aa000 size=32768
Memory: 2960308k/3137088k available (4691k kernel code, 396k absent, 176384k 
reserved, 2987k data, 656k init)
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:1280
xen: -->  irq=0
xen: -->  irq=1
xen: -->  irq=2
xen: -->  irq=3
xen: -->  irq=4
xen: -->  irq=5
xen: -->  irq=6
xen: -->  irq=7
xen: -->  irq=8
xen: -->  irq=9
xen: -->  irq=10
xen: -->  irq=11
xen: -->  irq=12
xen: -->  irq=13
xen: -->  irq=14
xen: -->  irq=15
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1
xen: registering gsi 9 triggering 0 polarity 0
xen_allocate_pirq: returning irq 9 for gsi 9
xen: -->  irq=9
xen: acpi sci 9
Console: colour VGA+ 80x25
console [hvc0] enabled, bootconsole disabled
console [hvc0] enabled, bootconsole disabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES:  8
... MAX_LOCK_DEPTH:          48
... MAX_LOCKDEP_KEYS:        8191
... CLASSHASH_SIZE:          4096
... MAX_LOCKDEP_ENTRIES:     16384
... MAX_LOCKDEP_CHAINS:      32768
... CHAINHASH_SIZE:          16384
 memory used by lock dependency info: 5855 kB
 per task-struct memory footprint: 1920 bytes
Xen: using vcpuop timer interface
installing Xen timer for CPU 0
  alloc irq_desc for 1279 on node 0
  alloc kstat_irqs on node 0
Detected 2400.062 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 
4800.12 BogoMIPS (lpj=2400062)
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 0/0x0 ->  Node 0
CPU: Unsupported number of siblings 16
Performance Events: unsupported p6 CPU model 30 no PMU driver, software events 
only.
lockdep: fixing up alternatives.
SMP alternatives: switching to UP code
ACPI: Core revision 20090903
  alloc irq_desc for 1278 on node 0
  alloc kstat_irqs on node 0
cpu 0 spinlock event irq 1278
  alloc irq_desc for 1277 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 1276 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 1275 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 1274 on node 0
  alloc kstat_irqs on node 0
installing Xen timer for CPU 1
  alloc irq_desc for 1273 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 1272 on node 0
  alloc kstat_irqs on node 0
cpu 1 spinlock event irq 1272
lockdep: fixing up alternatives.
SMP alternatives: switching to SMP code
  alloc irq_desc for 1271 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 1270 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 1269 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 1268 on node 0
  alloc kstat_irqs on node 0
Initializing CPU#1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 1/0x0 ->  Node 0
CPU: Unsupported number of siblings 16
installing Xen timer for CPU 2
  alloc irq_desc for 1267 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 1266 on node 0
  alloc kstat_irqs on node 0
cpu 2 spinlock event irq 1266
  alloc irq_desc for 1265 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 1264 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 1263 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 1262 on node 0
  alloc kstat_irqs on node 0
Initializing CPU#2
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 2/0x0 ->  Node 0
CPU: Unsupported number of siblings 16
installing Xen timer for CPU 3
  alloc irq_desc for 1261 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 1260 on node 0
  alloc kstat_irqs on node 0
cpu 3 spinlock event irq 1260
  alloc irq_desc for 1259 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 1258 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 1257 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 1256 on node 0
  alloc kstat_irqs on node 0
Initializing CPU#3
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 3/0x0 ->  Node 0
CPU: Unsupported number of siblings 16
Brought up 4 CPUs
Grant table initialized
Time: 16:45:17  Date: 04/07/10
NET: Registered protocol family 16
  alloc irq_desc for 1255 on node 0
  alloc kstat_irqs on node 0
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
bio: create slab<bio-0>  at 0
ERROR: Unable to locate IOAPIC for GSI 9
ACPI: EC: Look up EC in DSDT
ACPI Warning for \_SB_._OSC: Return type mismatch - found Integer, expected 
Buffer (20090903/nspredef-1006)
\_SB_:_OSC evaluation returned wrong type
_OSC request data:1 6
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI Warning: Incorrect checksum in table [OEMB] - 91, should be 8E 
(20090903/tbutils-314)
ACPI Warning: Incorrect checksum in table [    ] - 7B, should be BF 
(20090903/tbutils-314)
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:1a.0: reg 10 32bit mmio: [0xfb3fc000-0xfb3fc3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 10 32bit mmio: [0xfb3fa000-0xfb3fa3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0xb400-0xb407]
pci 0000:00:1f.2: reg 14 io port: [0xbc00-0xbc03]
pci 0000:00:1f.2: reg 18 io port: [0xb880-0xb887]
pci 0000:00:1f.2: reg 1c io port: [0xb800-0xb803]
pci 0000:00:1f.2: reg 20 io port: [0xb480-0xb49f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xfb3f8000-0xfb3f87ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 64bit mmio: [0xfb3f6000-0xfb3f60ff]
pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
pci 0000:03:00.0: reg 10 32bit mmio: [0xfb420000-0xfb43ffff]
pci 0000:03:00.0: reg 14 32bit mmio: [0xfb480000-0xfb4fffff]
pci 0000:03:00.0: reg 18 io port: [0xcc00-0xcc1f]
pci 0000:03:00.0: reg 1c 32bit mmio: [0xfb41c000-0xfb41ffff]
pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfb440000-0xfb47ffff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.0: bridge io port: [0xc000-0xcfff]
pci 0000:00:1c.0: bridge 32bit mmio: [0xfb400000-0xfb4fffff]
pci 0000:04:00.0: reg 10 32bit mmio: [0xfb5e0000-0xfb5fffff]
pci 0000:04:00.0: reg 18 io port: [0xdc00-0xdc1f]
pci 0000:04:00.0: reg 1c 32bit mmio: [0xfb5dc000-0xfb5dffff]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff]
pci 0000:00:1c.4: bridge 32bit mmio: [0xfb500000-0xfb5fffff]
pci 0000:05:00.0: reg 10 32bit mmio: [0xfb6e0000-0xfb6fffff]
pci 0000:05:00.0: reg 18 io port: [0xec00-0xec1f]
pci 0000:05:00.0: reg 1c 32bit mmio: [0xfb6dc000-0xfb6dffff]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:00:1c.5: bridge io port: [0xe000-0xefff]
pci 0000:00:1c.5: bridge 32bit mmio: [0xfb600000-0xfb6fffff]
pci 0000:06:03.0: reg 10 32bit mmio pref: [0xfa000000-0xfaffffff]
pci 0000:06:03.0: reg 14 32bit mmio: [0xfb7fc000-0xfb7fffff]
pci 0000:06:03.0: reg 18 32bit mmio: [0xfb800000-0xfbffffff]
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xfb700000-0xfbffffff]
pci 0000:00:1e.0: bridge 64bit mmio pref: [0xfa000000-0xfaffffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0ehci_hcd 0000:00:1a.0: port 1 high 
speed
ehci_hcd 0000:00:1a.0: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
ahci 0000:00:1f.2: version 3.0
xen: registering gsi 19 triggering 0 polarity 1
  alloc irq_desc for 19 on node 0
  alloc kstat_irqs on node 0
xen: -->  irq=19
ahci 0000:00:1f.2: PCI INT B ->  GSI 19 (level, low) ->  IRQ 19
  alloc irq_desc for 1247 on node 0
  alloc kstat_irqs on node 0
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs 
apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8100 irq 1247
ata2: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8180 irq 1247
ata3: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8200 irq 1247
ata4: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8280 irq 1247
ata5: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8300 irq 1247
ata6: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8380 irq 1247
usb 1-1: udev 2, busnum 1, minor = 1
usb 1-1: New USB device found, idVendor=8087, idProduct=0020
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: usb_probe_device
usb 1-1: configuration #1 chosen from 1 choice
usb 1-1: adding 1-1:1.0 (config #1, interface 0)
hub 1-1:1.0: usb_probe_interface
hub 1-1:1.0: usb_probe_interface - got id
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
hub 1-1:1.0: standalone hub
hub 1-1:1.0: individual port power switching
hub 1-1:1.0: individual port over-current protection
hub 1-1:1.0: Single TT
hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
hub 1-1:1.0: Port indicators are supported
hub 1-1:1.0: power on to power good time: 100ms
hub 1-1:1.0: local power source is good
hub 1-1:1.0: enabling power on all ports
hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000
hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
ehci_hcd 0000:00:1d.0: port 1 high speed
ehci_hcd 0000:00:1d.0: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
hub 1-1:1.0: port 2: status 0101 change 0001
usb 2-1: new high speed USB device using ehci_hcd and address 2
ehci_hcd 0000:00:1d.0: port 1 high speed
ehci_hcd 0000:00:1d.0: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
usb 1-1: link qh256-0001/ffff8800bc51f9c0 start 1 [1/0 us]
usb 2-1: udev 2, busnum 2, minor = 129
usb 2-1: New USB device found, idVendor=8087, idProduct=0020
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: usb_probe_device
usb 2-1: configuration #1 chosen from 1 choice
usb 2-1: adding 2-1:1.0 (config #1, interface 0)
hub 2-1:1.0: usb_probe_interface
hub 2-1:1.0: usb_probe_interface - got id
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
hub 2-1:1.0: standalone hub
hub 2-1:1.0: individual port power switching
hub 2-1:1.0: individual port over-current protection
hub 2-1:1.0: Single TT
hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns)
hub 2-1:1.0: Port indicators are supported
hub 2-1:1.0: power on to power good time: 100ms
hub 2-1:1.0: local power source is good
hub 2-1:1.0: enabling power on all ports
hub 1-1:1.0: state 7 ports 6 chg 0004 evt 0000
hub 1-1:1.0: port 2, status 0101, change 0000, 12 Mb/s
hub 1-1:1.0: port 2 not reset yet, waiting 10ms
usb 1-1.2: new full speed USB device using ehci_hcd and address 3
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
hub 1-1:1.0: port 2 not reset yet, waiting 10ms
ata1.00: ATA-8: WDC WD10EADS-00P8B0, 01.00A01, max UDMA/133
ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD10EADS-00P 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support 
DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
 sda:
usb 2-1: link qh256-0001/ffff8800bc51f6c0 start 1 [1/0 us]
 sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-1.2: skipped 1 descriptor after interface
usb 1-1.2: skipped 1 descriptor after interface
usb 1-1.2: default language 0x0409
usb 1-1.2: udev 3, busnum 1, minor = 2
usb 1-1.2: New USB device found, idVendor=0557, idProduct=2221
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2: Product: Hermon USB hidmouse Device
usb 1-1.2: Manufacturer: Winbond Electronics Corp
usb 1-1.2: usb_probe_device
usb 1-1.2: configuration #1 chosen from 1 choice
usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0)
usbhid 1-1.2:1.0: usb_probe_interface
usbhid 1-1.2:1.0: usb_probe_interface - got id
input: Winbond Electronics Corp Hermon USB hidmouse Device as 
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4
generic-usb 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond 
Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.2/input0
usb 1-1.2: adding 1-1.2:1.1 (config #1, interface 1)
usbhid 1-1.2:1.1: usb_probe_interface
usbhid 1-1.2:1.1: usb_probe_interface - got id
input: Winbond Electronics Corp Hermon USB hidmouse Device as 
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input5
usb 1-1.2: link qh8-0601/ffff8800be6225c0 start 2 [1/2 us]
generic-usb 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond 
Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.2/input1
hub 2-1:1.0: state 7 ports 8 chg 0000 evt 0000
hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0004
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7
ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD103SI  1AG0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support 
DPO or FUA
 sdb: sdb1 sdb2 sdb3 sdb4
sd 1:0:0:0: [sdb] Attached SCSI disk
input: ImExPS/2 Generic Explorer Mouse as 
/devices/platform/i8042/serio1/input/input6
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: WDC WD10EADS-00P8B0, 01.00A01, max UDMA/133
ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      WDC WD10EADS-00P 01.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support 
DPO or FUA
 sdc: sdc1 sdc2 sdc3 sdc4
sd 2:0:0:0: [sdc] Attached SCSI disk
hub 2-1:1.0: hub_suspend
usb 2-1: unlink qh256-0001/ffff8800bc51f6c0 start 1 [1/0 us]
usb 2-1: usb auto-suspend
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7
ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access     ATA      SAMSUNG HD103SI  1AG0 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support 
DPO or FUA
 sdd: sdd1 sdd2 sdd3 sdd4
sd 3:0:0:0: [sdd] Attached SCSI disk
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
md: raid10 personality registered for level 10
Intel AES-NI instructions are not detected.
md: md0 stopped.
md: bind<sdb3>
md: bind<sdc3>
md: bind<sdd3>
md: bind<sda3>
md: kicking non-fresh sdd3 from array!
md: unbind<sdd3>
md: export_rdev(sdd3)
md: kicking non-fresh sdb3 from array!
md: unbind<sdb3>
md: export_rdev(sdb3)
raid10: raid set md0 active with 2 out of 4 devices
md0: detected capacity change from 0 to 838860668928
 md0: unknown partition table
hub 2-0:1.0: hub_suspend
usb usb2: bus auto-suspend
ehci_hcd 0000:00:1d.0: suspend root hub

Password:***********
EXT4-fs (dm-2): mounted filesystem with ordered data mode
type=1404 audit(1270658817.238:2): enforcing=1 old_enforcing=0 auid=4294967295 
ses=4294967295
SELinux: 8192 avtab hash slots, 162639 rules.
SELinux: 8192 avtab hash slots, 162639 rules.
SELinux:  8 users, 12 roles, 3092 types, 152 bools, 1 sens, 1024 cats
SELinux:  77 classes, 162639 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev dm-2, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1270658817.689:3): policy loaded auid=4294967295 ses=4294967295
                Welcome to Fedora
                Press 'I' to enter interactive startup.
Starting udev: udev: starting version 145
ACPI: SSDT 00000000bf7b0180 00F20 (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
ACPI: SSDT 00000000bf7b10a0 004D5 (v01  PmRef  P001Cst 00003001 INTL 20051117)
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-1 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-2 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
e1000e: Copyright (c) 1999-2008 Intel Corporation.
xen: registering gsi 16 triggering 0 polarity 1
xen_allocate_pirq: returning irq 16 for gsi 16
xen: -->  irq=16
Already setup the GSI :16
e1000e 0000:03:00.0: PCI INT A ->  GSI 16 (level, low) ->  IRQ 16
e1000e 0000:03:00.0: setting latency timer to 64
  alloc irq_desc for 1246 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 1245 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 1244 on node 0
  alloc kstat_irqs on node 0
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-1 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-2 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
0000:03:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1b:21:4f:65:6b
0000:03:00.0: eth0: Intel(R) PRO/1000 Network Connection
0000:03:00.0: eth0: MAC: 3, PHY: 8, PBA No: e46981-003
xen: registering gsi 16 triggering 0 polarity 1
xen_allocate_pirq: returning irq 16 for gsi 16
xen: -->  irq=16
Already setup the GSI :16
e1000e 0000:04:00.0: PCI INT A ->  GSI 16 (level, low) ->  IRQ 16
e1000e 0000:04:00.0: setting latency timer to 64
  alloc irq_desc for 1243 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 1242 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 1241 on node 0
  alloc kstat_irqs on node 0
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-1 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-2 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-1 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-2 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120]
(XEN) Monitor-Mwait will be used to enter C-3 state
ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
0000:04:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:30:48:dd:eb:66
0000:04:00.0: eth1: Intel(R) PRO/1000 Network Connection
0000:04:00.0: eth1: MAC: 3, PHY: 8, PBA No: 0101ff-0ff
xen: registering gsi 17 triggering 0 polarity 1
xen_allocate_pirq: returning irq 17 for gsi 17
xen: -->  irq=17
Already setup the GSI :17
e1000e 0000:05:00.0: PCI INT A ->  GSI 17 (level, low) ->  IRQ 17
e1000e 0000:05:00.0: setting latency timer to 64
  alloc irq_desc for 1240 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 1239 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 1238 on node 0
  alloc kstat_irqs on node 0
0000:05:00.0: eth2: (PCI Express:2.5GB/s:Width x1) 00:30:48:dd:eb:67
0000:05:00.0: eth2: Intel(R) PRO/1000 Network Connection
0000:05:00.0: eth2: MAC: 3, PHY: 8, PBA No: 0101ff-0ff
udev: renamed network interface eth2 to eth1
udev: renamed network interface eth0 to eth2
udev: renamed network interface eth1_rename to eth0
mdadm: /dev/md0 is already in use.
Key slot 0 unlocked.
Key slot 0 unlocked.
device-mapper: multipath: version 1.1.0 loaded
Setting up Logical Volume Management:   14 logical volume(s) in volume group 
"vg_lilith-raid" now active
[  OK  ]
Checking filesystems
Checking all file systems.
[/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/mapper/vg_lilith--raid-root
/dev/mapper/vg_lilith--raid-root contains a file system with errors, check 
forced.
/dev/mapper/vg_lilith--raid-root: 343615/2564096 files (0.2% non-contiguous), 
2390774/10240000 blocks
[/sbin/fsck.ext4 (1) -- /boot] fsck.ext4 -a /dev/sda2
[/sbin/fsck.ext4 (2) -- /boot-spare] fsck.ext4 -a /dev/sdb2
/dev/sdb2: clean, 11/66384 files, 12695/265072 blocks
/dev/sda2: clean, 89/66384 files, 69878/265072 blocks
[/sbin/fsck.ext4 (1) -- /home] fsck.ext4 -a 
/dev/mapper/luks-11eb0145-088a-4c13-acf4-9784e82bb1e3
/dev/mapper/luks-11eb0145-088a-4c13-acf4-9784e82bb1e3: clean, 506715/12804096 
files, 10193956/51199495 blocks
[/sbin/fsck.ext4 (1) -- /var] fsck.ext4 -a 
/dev/mapper/luks-37e6b844-a112-427c-be60-ae6f4d9c5041
/dev/mapper/luks-37e6b844-a112-427c-be60-ae6f4d9c5041: clean, 21026/5120000 
files, 490586/20479495 blocks
[  OK  ]
Remounting root filesystem in read-write mode:  [  OK  ]
Mounting local filesystems:  EXT4-fs (sda2): mounted filesystem with ordered 
data mode
SELinux: initialized (dev sda2, type ext4), uses xattr
EXT4-fs (sdb2): mounted filesystem with ordered data mode
SELinux: initialized (dev sdb2, type ext4), uses xattr
EXT4-fs (dm-15): mounted filesystem with ordered data mode
SELinux: initialized (dev dm-15, type ext4), uses xattr
EXT4-fs (dm-16): mounted filesystem with ordered data mode
SELinux: initialized (dev dm-16, type ext4), uses xattr
SELinux: initialized (dev xenfs, type xenfs), uses genfs_contexts
[  OK  ]
Enabling local filesystem quotas:  [  OK  ]
Enabling /etc/fstab swaps:  Adding 16381972k swap on 
/dev/mapper/luks-2aac27aa-0bb6-46cc-8a7a-83af1ca296a2.  Priority:-1 extents:1 
across:16381972k
[  OK  ]
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
Entering non-interactive startup
Applying Intel CPU microcode update: platform microcode: firmware: requesting 
intel-ucode/06-1e-05
platform microcode: firmware: requesting intel-ucode/06-1e-05
platform microcode: firmware: requesting intel-ucode/06-1e-05
platform microcode: firmware: requesting intel-ucode/06-1e-05
Microcode Update Driver: v2.00<tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
Microcode Update Driver: v2.00 removed.
Starting monitoring for VG vg_lilith-raid:   14 logical volume(s) in volume group 
"vg_lilith-raid" monitored
[  OK  ]
ip6tables: Applying firewall rules: [  OK  ]
ip6tables: Loading additional modules: nf_conntrack_netbios_ns [  OK  ]
Starting auditd: [  OK  ]
Starting portreserve: [  OK  ]
Starting system logger: [  OK  ]
Starting irqbalance: [  OK  ]
Starting rpcbind: [  OK  ]
Starting mdmonitor: [  OK  ]
Starting system message bus: [  OK  ]
Starting Avahi daemon... [  OK  ]
Starting NFS statd: [  OK  ]
Starting RPC idmapd: FATAL: Module sunrpc not found.
FATAL: Error running install command for sunrpc
Error: RPC MTAB does not exist.
Starting cups: [  OK  ]
Starting acpi daemon: [  OK  ]
Starting HAL daemon: [  OK  ]
Starting PC/SC smart card daemon (pcscd): [  OK  ]
Retrigger failed udev events[  OK  ]
Setting network parameters... [  OK  ]
Starting NetworkManager daemon: [  OK  ]
Enabling Bluetooth devices:
Starting sshd: [  OK  ]
ADDRCONF(NETDEV_UP): eth2: link is not ready
ntpdate: Synchronizing with time server: ADDRCONF(NETDEV_UP): eth0: link is not 
ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
[FAILED]
Starting ntpd: [  OK  ]
Starting abrt daemon: [  OK  ]
usb 1-1.2: link qh8-0601/ffff8800b58ba740 start 3 [1/2 us]

[  OK  ] crond: [  OK  ]
Enabling monthly Smolt checkin: [  OK  ]
[  OK  ] atd: [  OK  ]
Starting libvirtd daemon: [  OK  ]
Bridge firewalling registered
virbr0: starting userspace STP failed, starting kernel STP
e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
e1000e: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
e1000e: eth0 NICMbps Full Duplex, Flow Control: RX/TX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs

Fedora release 12 (Constantine)
Kernel 2.6.32.11 on an x86_64 (/dev/hvc0)

lilith.goop.org login: usb usb2: usb auto-resume
ehci_hcd 0000:00:1d.0: resume root hub
hub 2-0:1.0: hub_resume
hub 2-0:1.0: port 1: status 0507 change 0000
usb 2-1: usb auto-resume
hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
ehci_hcd 0000:00:1d.0: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
usb 2-1: finish resume
hub 2-1:1.0: hub_resume
ehci_hcd 0000:00:1d.0: reused qh ffff8800bc51f6c0 schedule
usb 2-1: link qh256-0001/ffff8800bc51f6c0 start 1 [1/0 us]
hub 2-1:1.0: state 7 ports


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel

<Prev in Thread] Current Thread [Next in Thread>