Re: [Xen-devel] New DMAR errors in Xen 4.1

[Jeremy Fitzhardinge <jeremy@xxxxxxxx>]

On 04/06/2010 03:38 PM, Jeremy Fitzhardinge wrote:
> I'm seeing DMAR errors with current Xen-unstable, which weren't there 
> in -rc8 (-rc9?):
> type=1403 audit(1270593095.214:3): policy loaded auid=4294967295 
> ses=4294967295
> (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault
> (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] 
> fault addr bf57b000, iommu reg = ffff82c3fff57000
> (XEN) DMAR:[fault reason 05h] PTE Write access is not set
> (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = 
> bf57b
> (XEN)     root_entry = ffff83013ff36000
> (XEN)     root_entry[0] = 13c6bb001
> (XEN)     context = ffff83013c6bb000
> (XEN)     context[fa] = 2_13fec4001
> (XEN)     l4 = ffff83013fec4000
> (XEN)     l4_index = 0
> (XEN)     l4[0] = 13fec1003
> (XEN)     l3 = ffff83013fec1000
> (XEN)     l3_index = 2
> (XEN)     l3[2] = 13ccbe003
> (XEN)     l2 = ffff83013ccbe000
> (XEN)     l2_index = 1fa
> (XEN)     l2[1fa] = 13cac3003
> (XEN)     l1 = ffff83013cac3000
> (XEN)     l1_index = 17b
> (XEN)     l1[17b] = 0
> (XEN)     l1[17b] not present
> (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [00:1f.2] 
> fault addr bf57a000, iommu reg = ffff82c3fff57000
> (XEN) DMAR:[fault reason 05h] PTE Write access is not set
> (XEN) print_vtd_entries: iommu = ffff83013fff3e80 bdf = 0:1f.2 gmfn = 
> bf57a
> (XEN)     root_entry = ffff83013ff36000
> (XEN)     root_entry[0] = 13c6bb001
> (XEN)     context = ffff83013c6bb000
> (XEN)     context[fa] = 2_13fec4001
> (XEN)     l4 = ffff83013fec4000
> (XEN)     l4_index = 0
> (XEN)     l4[0] = 13fec1003
> (XEN)     l3 = ffff83013fec1000
> (XEN)     l3_index = 2
> (XEN)     l3[2] = 13ccbe003
> (XEN)     l2 = ffff83013ccbe000
> (XEN)     l2_index = 1fa
> (XEN)     l2[1fa] = 13cac3003
> (XEN)     l1 = ffff83013cac3000
> (XEN)     l1_index = 17a
> (XEN)     l1[17a] = 0
> (XEN)     l1[17a] not present
>
>
>
> Device 0:1f.2 is my SATA controller.  I haven't tried bisecting it or 
> anything yet; I don't see any recent changes which are obviously 
> relevant though.
It turns out its... "Enable debug=y by default in the build."  So I 
guess these errors have been happening silently thus far?
    J

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel