WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-devel

Re: [Xen-devel] Xen cannot boot with pvops dom0

Here's the boot log for a normal boot with pci=nomsi.

The initrd should be setup properly. I built the kernel using the latest unstable and the normal linux make commands (make linux-2.6-pvops config|build|install), which should do the right thing.

The Xen boot was an uncoaxed boot. It usually gets up to the point of loading Alsa (but this message doesn't manage to get printed to the serial console, just to the screen attached to my test box). After that, it's a matter of waiting and pushing keys/buttons to try to get it to keep going. It seems to have issues trying to read the harddrives as well.


Patrick


Jeremy Fitzhardinge wrote:
On 07/01/09 00:32, Patrick Colp wrote:
Hmmm, OK. Well, something is still going wrong. I find that adding
things like irqpoll and/or acpi=noirq seems to help a bit. By that I
mean that it gets further into the boot process before stalling. If I
wait a while and press random keys/buttons (like Num Lock or the power
button), then that seems to coax it into booting a little bit more,
but I've never managed to get it to completely boot. The furthest I
got was to where it tries to read the root filesystem.

I could give you a dump of the boot-up messages, but aside from the
ioapic stuff, there's nothing out of the ordinary.

Yeah, from those logs it looks OK.  Was that a "coaxed" Xen boot?  It
certainly looks like lots of interrupts are being received properly
(drives detected, usb probed, etc).

Also, for a more direct comparison, what happens when you boot native
with pci=nomsi?  I assume it will work, but it will make the logs
directly comparable; or maybe the system just doesn't work without MSI?

Write protecting the kernel read-only data: 7936k
Loading, please wait...
Couldnt get a file descriptor referring to the console
Is your initrd set up right?

    J
Jul  3 08:46:40 zumbi kernel: Inspecting /boot/System.map-2.6.30-rc6-tip
Jul  3 08:46:40 zumbi kernel: Cannot find map file.
Jul  3 08:46:40 zumbi kernel: Loaded 52141 symbols from 1 module.
Jul  3 08:46:40 zumbi kernel: [    0.000000] Initializing cgroup subsys cpuset
Jul  3 08:46:40 zumbi kernel: [    0.000000] Initializing cgroup subsys cpu
Jul  3 08:46:40 zumbi kernel: [    0.000000] Linux version 2.6.30-rc6-tip 
(t_patrickco@waitaha) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #5 SMP Fri 
Jun 26 16:33:19 BST 2009
Jul  3 08:46:40 zumbi kernel: [    0.000000] Command line: root=/dev/sda1 ro 
console=ttyS0 console=tty0 console=hvc0 pci=nomsi
Jul  3 08:46:40 zumbi kernel: [    0.000000] KERNEL supported cpus:
Jul  3 08:46:40 zumbi kernel: [    0.000000]   Intel GenuineIntel
Jul  3 08:46:40 zumbi kernel: [    0.000000]   AMD AuthenticAMD
Jul  3 08:46:40 zumbi kernel: [    0.000000]   Centaur CentaurHauls
Jul  3 08:46:40 zumbi kernel: [    0.000000] BIOS-provided physical RAM map:
Jul  3 08:46:40 zumbi kernel: [    0.000000]  BIOS-e820: 0000000000000000 - 
000000000009ec00 (usable)
Jul  3 08:46:40 zumbi kernel: [    0.000000]  BIOS-e820: 000000000009ec00 - 
00000000000a0000 (reserved)
Jul  3 08:46:40 zumbi kernel: [    0.000000]  BIOS-e820: 00000000000e0000 - 
0000000000100000 (reserved)
Jul  3 08:46:40 zumbi kernel: [    0.000000]  BIOS-e820: 0000000000100000 - 
000000009cf88000 (usable)
Jul  3 08:46:40 zumbi kernel: [    0.000000]  BIOS-e820: 000000009cf88000 - 
000000009d106000 (ACPI NVS)
Jul  3 08:46:40 zumbi kernel: [    0.000000]  BIOS-e820: 000000009d106000 - 
000000009f6bd000 (usable)
Jul  3 08:46:40 zumbi kernel: [    0.000000]  BIOS-e820: 000000009f6bd000 - 
000000009f6bf000 (reserved)
Jul  3 08:46:40 zumbi kernel: [    0.000000]  BIOS-e820: 000000009f6bf000 - 
000000009f714000 (usable)
Jul  3 08:46:40 zumbi kernel: [    0.000000]  BIOS-e820: 000000009f714000 - 
000000009f7bf000 (ACPI NVS)
Jul  3 08:46:40 zumbi kernel: [    0.000000]  BIOS-e820: 000000009f7bf000 - 
000000009f7e1000 (usable)
Jul  3 08:46:40 zumbi kernel: [    0.000000]  BIOS-e820: 000000009f7e1000 - 
000000009f7ff000 (ACPI data)
Jul  3 08:46:40 zumbi kernel: [    0.000000]  BIOS-e820: 000000009f7ff000 - 
000000009f800000 (usable)
Jul  3 08:46:40 zumbi kernel: [    0.000000]  BIOS-e820: 000000009f800000 - 
00000000b0000000 (reserved)
Jul  3 08:46:40 zumbi kernel: [    0.000000]  BIOS-e820: 00000000fc000000 - 
00000000fd000000 (reserved)
Jul  3 08:46:40 zumbi kernel: [    0.000000]  BIOS-e820: 00000000ffe00000 - 
0000000100000000 (reserved)
Jul  3 08:46:40 zumbi kernel: [    0.000000]  BIOS-e820: 0000000100000000 - 
0000000160000000 (usable)
Jul  3 08:46:40 zumbi kernel: [    0.000000] DMI 2.5 present.
Jul  3 08:46:40 zumbi kernel: [    0.000000] last_pfn = 0x160000 max_arch_pfn = 
0x400000000
Jul  3 08:46:40 zumbi kernel: [    0.000000] MTRR default type: uncachable
Jul  3 08:46:40 zumbi kernel: [    0.000000] MTRR fixed ranges enabled:
Jul  3 08:46:40 zumbi kernel: [    0.000000]   00000-9FFFF write-back
Jul  3 08:46:40 zumbi kernel: [    0.000000]   A0000-BFFFF uncachable
Jul  3 08:46:40 zumbi kernel: [    0.000000]   C0000-DFFFF write-protect
Jul  3 08:46:40 zumbi kernel: [    0.000000]   E0000-FFFFF uncachable
Jul  3 08:46:40 zumbi kernel: [    0.000000] MTRR variable ranges enabled:
Jul  3 08:46:40 zumbi kernel: [    0.000000]   0 base 000000000 mask F80000000 
write-back
Jul  3 08:46:40 zumbi kernel: [    0.000000]   1 base 080000000 mask FE0000000 
write-back
Jul  3 08:46:40 zumbi kernel: [    0.000000]   2 base 100000000 mask F00000000 
write-back
Jul  3 08:46:40 zumbi kernel: [    0.000000]   3 disabled
Jul  3 08:46:40 zumbi kernel: [    0.000000]   4 disabled
Jul  3 08:46:40 zumbi kernel: [    0.000000]   5 disabled
Jul  3 08:46:40 zumbi kernel: [    0.000000]   6 disabled
Jul  3 08:46:40 zumbi kernel: [    0.000000]   7 disabled
Jul  3 08:46:40 zumbi kernel: [    0.000000] x86 PAT enabled: cpu 0, old 
0x7040600070406, new 0x7010600070106
Jul  3 08:46:40 zumbi kernel: [    0.000000] e820 update range: 
00000000a0000000 - 0000000100000000 (usable) ==> (reserved)
Jul  3 08:46:40 zumbi kernel: [    0.000000] last_pfn = 0x9f800 max_arch_pfn = 
0x400000000
Jul  3 08:46:40 zumbi kernel: [    0.000000] e820 update range: 
0000000000001000 - 0000000000006000 (usable) ==> (reserved)
Jul  3 08:46:40 zumbi kernel: [    0.000000] Scanning 1 areas for low memory 
corruption
Jul  3 08:46:40 zumbi kernel: [    0.000000] modified physical RAM map:
Jul  3 08:46:40 zumbi kernel: [    0.000000]  modified: 0000000000000000 - 
0000000000001000 (usable)
Jul  3 08:46:40 zumbi kernel: [    0.000000]  modified: 0000000000001000 - 
0000000000006000 (reserved)
Jul  3 08:46:40 zumbi kernel: [    0.000000]  modified: 0000000000006000 - 
000000000009ec00 (usable)
Jul  3 08:46:40 zumbi kernel: [    0.000000]  modified: 000000000009ec00 - 
00000000000a0000 (reserved)
Jul  3 08:46:40 zumbi kernel: [    0.000000]  modified: 00000000000e0000 - 
0000000000100000 (reserved)
Jul  3 08:46:40 zumbi kernel: [    0.000000]  modified: 0000000000100000 - 
000000009cf88000 (usable)
Jul  3 08:46:40 zumbi kernel: [    0.000000]  modified: 000000009cf88000 - 
000000009d106000 (ACPI NVS)
Jul  3 08:46:40 zumbi kernel: [    0.000000]  modified: 000000009d106000 - 
000000009f6bd000 (usable)
Jul  3 08:46:40 zumbi kernel: [    0.000000]  modified: 000000009f6bd000 - 
000000009f6bf000 (reserved)
Jul  3 08:46:40 zumbi kernel: [    0.000000]  modified: 000000009f6bf000 - 
000000009f714000 (usable)
Jul  3 08:46:40 zumbi kernel: [    0.000000]  modified: 000000009f714000 - 
000000009f7bf000 (ACPI NVS)
Jul  3 08:46:40 zumbi kernel: [    0.000000]  modified: 000000009f7bf000 - 
000000009f7e1000 (usable)
Jul  3 08:46:40 zumbi kernel: [    0.000000]  modified: 000000009f7e1000 - 
000000009f7ff000 (ACPI data)
Jul  3 08:46:40 zumbi kernel: [    0.000000]  modified: 000000009f7ff000 - 
000000009f800000 (usable)
Jul  3 08:46:40 zumbi kernel: [    0.000000]  modified: 000000009f800000 - 
00000000b0000000 (reserved)
Jul  3 08:46:40 zumbi kernel: [    0.000000]  modified: 00000000fc000000 - 
00000000fd000000 (reserved)
Jul  3 08:46:40 zumbi kernel: [    0.000000]  modified: 00000000ffe00000 - 
0000000100000000 (reserved)
Jul  3 08:46:40 zumbi kernel: [    0.000000]  modified: 0000000100000000 - 
0000000160000000 (usable)
Jul  3 08:46:40 zumbi kernel: [    0.000000] initial memory mapped : 0 - 
20000000
Jul  3 08:46:40 zumbi kernel: [    0.000000] init_memory_mapping: 
0000000000000000-000000009f800000
Jul  3 08:46:40 zumbi kernel: [    0.000000]  0000000000 - 009f800000 page 2M
Jul  3 08:46:40 zumbi kernel: [    0.000000] kernel direct mapping tables up to 
9f800000 @ 8000-c000
Jul  3 08:46:40 zumbi kernel: [    0.000000] init_memory_mapping: 
0000000100000000-0000000160000000
Jul  3 08:46:40 zumbi kernel: [    0.000000]  0100000000 - 0160000000 page 2M
Jul  3 08:46:40 zumbi kernel: [    0.000000] kernel direct mapping tables up to 
160000000 @ a000-11000
Jul  3 08:46:40 zumbi kernel: [    0.000000] RAMDISK: 37c85000 - 37fef7b4
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: RSDP 00000000000fe020 00024 
(v02 INTEL )
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: XSDT 000000009f7fe120 0006C 
(v01 INTEL  DX58SO   00000493      01000013)
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: FACP 000000009f7fd000 000F4 
(v03 INTEL  DX58SO   00000493 MSFT 0100000D)
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI Warning (tbfadt-0562): 
Optional field Pm2ControlBlock has zero address or length: 0000000000000450/0 
[20090320]
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI Warning (tbfadt-0612): 
Invalid length for Pm2ControlBlock: 0, using default 8 [20090320]
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: DSDT 000000009f7f8000 043A2 
(v02 INTEL  DX58SO   00000493 MSFT 0100000D)
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: FACS 000000009f727000 00040
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: APIC 000000009f7f7000 00138 
(v02 INTEL  DX58SO   00000493 MSFT 0100000D)
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: WDDT 000000009f7f6000 00040 
(v01 INTEL  DX58SO   00000493 MSFT 0100000D)
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: MCFG 000000009f7f5000 0003C 
(v01 INTEL  DX58SO   00000493 MSFT 0100000D)
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: ASF! 000000009f7f4000 000AC 
(v32 INTEL  DX58SO   00000493 MSFT 0100000D)
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: SSDT 000000009f7e3000 0E134 
(v01 INTEL  SSDT  PM 00000493 MSFT 0100000D)
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: DMAR 000000009f7e1000 00110 
(v01 INTEL  DX58SO   00000493 MSFT 0100000D)
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: WDTT 000000009f7f2000 00164 
(v01 INTEL  DX58SO   00000493 MSFT 0100000D)
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: ASPT 000000009f7f3000 00034 
(v04 INTEL  PerfTune 00000493 MSFT 0100000D)
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Jul  3 08:46:40 zumbi kernel: [    0.000000] (8 early reservations) ==> bootmem 
[0000000000 - 0160000000]
Jul  3 08:46:40 zumbi kernel: [    0.000000]   #0 [0000000000 - 0000001000]   
BIOS data page ==> [0000000000 - 0000001000]
Jul  3 08:46:40 zumbi kernel: [    0.000000]   #1 [0000006000 - 0000008000]     
  TRAMPOLINE ==> [0000006000 - 0000008000]
Jul  3 08:46:40 zumbi kernel: [    0.000000]   #2 [0001000000 - 0001a42e08]    
TEXT DATA BSS ==> [0001000000 - 0001a42e08]
Jul  3 08:46:40 zumbi kernel: [    0.000000]   #3 [0037c85000 - 0037fef7b4]     
     RAMDISK ==> [0037c85000 - 0037fef7b4]
Jul  3 08:46:40 zumbi kernel: [    0.000000]   #4 [000009ec00 - 0000100000]    
BIOS reserved ==> [000009ec00 - 0000100000]
Jul  3 08:46:40 zumbi kernel: [    0.000000]   #5 [0001a43000 - 0001a430bc]     
         BRK ==> [0001a43000 - 0001a430bc]
Jul  3 08:46:40 zumbi kernel: [    0.000000]   #6 [0000008000 - 000000a000]     
     PGTABLE ==> [0000008000 - 000000a000]
Jul  3 08:46:40 zumbi kernel: [    0.000000]   #7 [000000a000 - 000000c000]     
     PGTABLE ==> [000000a000 - 000000c000]
Jul  3 08:46:40 zumbi kernel: [    0.000000] Zone PFN ranges:
Jul  3 08:46:40 zumbi kernel: [    0.000000]   DMA      0x00000000 -> 0x00001000
Jul  3 08:46:40 zumbi kernel: [    0.000000]   DMA32    0x00001000 -> 0x00100000
Jul  3 08:46:40 zumbi kernel: [    0.000000]   Normal   0x00100000 -> 0x00160000
Jul  3 08:46:40 zumbi kernel: [    0.000000] Movable zone start PFN for each 
node
Jul  3 08:46:40 zumbi kernel: [    0.000000] early_node_map[8] active PFN ranges
Jul  3 08:46:40 zumbi kernel: [    0.000000]     0: 0x00000000 -> 0x00000001
Jul  3 08:46:40 zumbi kernel: [    0.000000]     0: 0x00000006 -> 0x0000009e
Jul  3 08:46:40 zumbi kernel: [    0.000000]     0: 0x00000100 -> 0x0009cf88
Jul  3 08:46:40 zumbi kernel: [    0.000000]     0: 0x0009d106 -> 0x0009f6bd
Jul  3 08:46:40 zumbi kernel: [    0.000000]     0: 0x0009f6bf -> 0x0009f714
Jul  3 08:46:40 zumbi kernel: [    0.000000]     0: 0x0009f7bf -> 0x0009f7e1
Jul  3 08:46:40 zumbi kernel: [    0.000000]     0: 0x0009f7ff -> 0x0009f800
Jul  3 08:46:40 zumbi kernel: [    0.000000]     0: 0x00100000 -> 0x00160000
Jul  3 08:46:40 zumbi kernel: [    0.000000] On node 0 totalpages: 1045840
Jul  3 08:46:40 zumbi kernel: [    0.000000]   DMA zone: 56 pages used for 
memmap
Jul  3 08:46:40 zumbi kernel: [    0.000000]   DMA zone: 104 pages reserved
Jul  3 08:46:40 zumbi kernel: [    0.000000]   DMA zone: 3833 pages, LIFO 
batch:0
Jul  3 08:46:40 zumbi kernel: [    0.000000]   DMA32 zone: 14280 pages used for 
memmap
Jul  3 08:46:40 zumbi kernel: [    0.000000]   DMA32 zone: 634351 pages, LIFO 
batch:31
Jul  3 08:46:40 zumbi kernel: [    0.000000]   Normal zone: 5376 pages used for 
memmap
Jul  3 08:46:40 zumbi kernel: [    0.000000]   Normal zone: 387840 pages, LIFO 
batch:31
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x408
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x00] 
lapic_id[0x00] enabled)
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x01] 
lapic_id[0x10] disabled)
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x02] 
lapic_id[0x02] enabled)
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x03] 
lapic_id[0x12] disabled)
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x04] 
lapic_id[0x04] enabled)
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x05] 
lapic_id[0x14] disabled)
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x06] 
lapic_id[0x06] enabled)
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x07] 
lapic_id[0x16] disabled)
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x08] 
lapic_id[0x01] enabled)
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x09] 
lapic_id[0x11] disabled)
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x0a] 
lapic_id[0x03] enabled)
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x0b] 
lapic_id[0x13] disabled)
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x0c] 
lapic_id[0x05] enabled)
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x0d] 
lapic_id[0x15] disabled)
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x0e] 
lapic_id[0x07] enabled)
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x0f] 
lapic_id[0x17] disabled)
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] 
high level lint[0x1])
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] 
high level lint[0x1])
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] 
high level lint[0x1])
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] 
high level lint[0x1])
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] 
high level lint[0x1])
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] 
high level lint[0x1])
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] 
high level lint[0x1])
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] 
high level lint[0x1])
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] 
high level lint[0x1])
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] 
high level lint[0x1])
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] 
high level lint[0x1])
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] 
high level lint[0x1])
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] 
high level lint[0x1])
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] 
high level lint[0x1])
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e] 
high level lint[0x1])
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] 
high level lint[0x1])
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: IOAPIC (id[0x08] 
address[0xfec00000] gsi_base[0])
Jul  3 08:46:40 zumbi kernel: [    0.000000] IOAPIC[0]: apic_id 8, version 0, 
address 0xfec00000, GSI 0-23
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 
global_irq 2 dfl dfl)
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 
global_irq 9 high level)
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: IRQ0 used by override.
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: IRQ2 used by override.
Jul  3 08:46:40 zumbi kernel: [    0.000000] ACPI: IRQ9 used by override.
Jul  3 08:46:40 zumbi kernel: [    0.000000] Using ACPI (MADT) for SMP 
configuration information
Jul  3 08:46:40 zumbi kernel: [    0.000000] 16 Processors exceeds NR_CPUS 
limit of 8
Jul  3 08:46:40 zumbi kernel: [    0.000000] SMP: Allowing 8 CPUs, 0 hotplug 
CPUs
Jul  3 08:46:40 zumbi kernel: [    0.000000] nr_irqs_gsi: 24
Jul  3 08:46:40 zumbi kernel: [    0.000000] PM: Registered nosave memory: 
0000000000001000 - 0000000000006000
Jul  3 08:46:40 zumbi kernel: [    0.000000] PM: Registered nosave memory: 
000000000009e000 - 000000000009f000
Jul  3 08:46:40 zumbi kernel: [    0.000000] PM: Registered nosave memory: 
000000000009f000 - 00000000000a0000
Jul  3 08:46:40 zumbi kernel: [    0.000000] PM: Registered nosave memory: 
00000000000a0000 - 00000000000e0000
Jul  3 08:46:40 zumbi kernel: [    0.000000] PM: Registered nosave memory: 
00000000000e0000 - 0000000000100000
Jul  3 08:46:40 zumbi kernel: [    0.000000] PM: Registered nosave memory: 
000000009cf88000 - 000000009d106000
Jul  3 08:46:40 zumbi kernel: [    0.000000] PM: Registered nosave memory: 
000000009f6bd000 - 000000009f6bf000
Jul  3 08:46:40 zumbi kernel: [    0.000000] PM: Registered nosave memory: 
000000009f714000 - 000000009f7bf000
Jul  3 08:46:40 zumbi kernel: [    0.000000] PM: Registered nosave memory: 
000000009f7e1000 - 000000009f7ff000
Jul  3 08:46:40 zumbi kernel: [    0.000000] PM: Registered nosave memory: 
000000009f800000 - 00000000b0000000
Jul  3 08:46:40 zumbi kernel: [    0.000000] PM: Registered nosave memory: 
00000000b0000000 - 00000000fc000000
Jul  3 08:46:40 zumbi kernel: [    0.000000] PM: Registered nosave memory: 
00000000fc000000 - 00000000fd000000
Jul  3 08:46:40 zumbi kernel: [    0.000000] PM: Registered nosave memory: 
00000000fd000000 - 00000000ffe00000
Jul  3 08:46:40 zumbi kernel: [    0.000000] PM: Registered nosave memory: 
00000000ffe00000 - 0000000100000000
Jul  3 08:46:40 zumbi kernel: [    0.000000] Allocating PCI resources starting 
at b0000000 (gap: b0000000:4c000000)
Jul  3 08:46:40 zumbi kernel: [    0.000000] NR_CPUS:8 nr_cpumask_bits:8 
nr_cpu_ids:8 nr_node_ids:1
Jul  3 08:46:40 zumbi kernel: [    0.000000] PERCPU: Embedded 28 pages at 
ffff880028028000, static data 83616 bytes
Jul  3 08:46:40 zumbi kernel: [    0.000000] Built 1 zonelists in Zone order, 
mobility grouping on.  Total pages: 1026024
Jul  3 08:46:40 zumbi kernel: [    0.000000] Kernel command line: 
root=/dev/sda1 ro console=ttyS0 console=tty0 console=hvc0 pci=nomsi
Jul  3 08:46:40 zumbi kernel: [    0.000000] Initializing CPU#0
Jul  3 08:46:40 zumbi kernel: [    0.000000] Experimental hierarchical RCU 
implementation.
Jul  3 08:46:40 zumbi kernel: [    0.000000] Experimental hierarchical RCU init 
done.
Jul  3 08:46:40 zumbi kernel: [    0.000000] NR_IRQS:4352 nr_irqs:472
Jul  3 08:46:40 zumbi kernel: [    0.000000] PID hash table entries: 4096 
(order: 12, 32768 bytes)
Jul  3 08:46:40 zumbi kernel: [    0.000000] Extended CMOS year: 2000
Jul  3 08:46:40 zumbi kernel: [    0.000000] Fast TSC calibration using PIT
Jul  3 08:46:40 zumbi kernel: [    0.000000] Detected 2933.044 MHz processor.
Jul  3 08:46:40 zumbi kernel: [   30.031649] Console: colour VGA+ 80x25
Jul  3 08:46:40 zumbi kernel: [   30.031650] console [tty0] enabled
Jul  3 08:46:40 zumbi kernel: [   30.075641] console [ttyS0] enabled
Jul  3 08:46:40 zumbi kernel: [   30.167219] Dentry cache hash table entries: 
524288 (order: 10, 4194304 bytes)
Jul  3 08:46:40 zumbi kernel: [   30.168687] Inode-cache hash table entries: 
262144 (order: 9, 2097152 bytes)
Jul  3 08:46:40 zumbi kernel: [   30.169694] Checking aperture...
Jul  3 08:46:40 zumbi kernel: [   30.175748] No AGP bridge found
Jul  3 08:46:40 zumbi kernel: [   30.176166] PCI-DMA: Using software bounce 
buffering for IO (SWIOTLB)
Jul  3 08:46:40 zumbi kernel: [   30.181817] Placing 64MB software IO TLB 
between ffff880020000000 - ffff880024000000
Jul  3 08:46:40 zumbi kernel: [   30.187914] software IO TLB at phys 0x20000000 
- 0x24000000
Jul  3 08:46:40 zumbi kernel: [   30.212752] Memory: 4037788k/5767168k 
available (5383k kernel code, 1583808k absent, 144664k reserved, 3284k data, 
504k init)
Jul  3 08:46:40 zumbi kernel: [   30.213684] SLUB: Genslabs=13, HWalign=64, 
Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Jul  3 08:46:40 zumbi kernel: [   30.214488] Calibrating delay loop (skipped), 
value calculated using timer frequency.. 5866.08 BogoMIPS (lpj=2933044)
Jul  3 08:46:40 zumbi kernel: [   30.215431] Security Framework initialized
Jul  3 08:46:40 zumbi kernel: [   30.215860] SELinux:  Initializing.
Jul  3 08:46:40 zumbi kernel: [   30.216261] SELinux:  Starting in permissive 
mode
Jul  3 08:46:40 zumbi kernel: [   30.216266] Mount-cache hash table entries: 256
Jul  3 08:46:40 zumbi kernel: [   30.216794] Initializing cgroup subsys ns
Jul  3 08:46:40 zumbi kernel: [   30.217213] Initializing cgroup subsys cpuacct
Jul  3 08:46:40 zumbi kernel: [   30.217655] Initializing cgroup subsys freezer
Jul  3 08:46:40 zumbi kernel: [   30.218098] CPU: Physical Processor ID: 0
Jul  3 08:46:40 zumbi kernel: [   30.218521] CPU: Processor Core ID: 0
Jul  3 08:46:40 zumbi kernel: [   30.218926] CPU: L1 I cache: 32K, L1 D cache: 
32K
Jul  3 08:46:40 zumbi kernel: [   30.219414] CPU: L2 cache: 256K
Jul  3 08:46:40 zumbi kernel: [   30.219805] CPU: L3 cache: 8192K
Jul  3 08:46:40 zumbi kernel: [   30.220192] [ds] using Core i7 configuration
Jul  3 08:46:40 zumbi kernel: [   30.220625] [ds] sizes: address: 64 bit, 
bts/pebs record: 24/176 bytes
Jul  3 08:46:40 zumbi kernel: [   30.221191] using mwait in idle threads.
Jul  3 08:46:40 zumbi kernel: [   30.221612] Intel Performance Monitoring 
support detected.
Jul  3 08:46:40 zumbi kernel: [   30.222084] ... version:         3
Jul  3 08:46:40 zumbi kernel: [   30.222482] ... bit width:       48
Jul  3 08:46:40 zumbi kernel: [   30.222880] ... num counters:    4
Jul  3 08:46:40 zumbi kernel: [   30.223274] ... value mask:      
0000ffffffffffff
Jul  3 08:46:40 zumbi kernel: [   30.223722] ... max period:      
000000007fffffff
Jul  3 08:46:40 zumbi kernel: [   30.224165] ... fixed counters:  3
Jul  3 08:46:40 zumbi kernel: [   30.224564] ... counter mask:    
000000070000000f
Jul  3 08:46:40 zumbi kernel: [   30.225672] ACPI: Core revision 20090320
Jul  3 08:46:40 zumbi kernel: [   30.238163] Setting APIC routing to flat
Jul  3 08:46:40 zumbi kernel: [   30.255128] ..TIMER: vector=0x30 apic1=0 
pin1=2 apic2=-1 pin2=-1
Jul  3 08:46:40 zumbi kernel: [   30.265692] CPU0: Genuine Intel(R) CPU         
  @ 0000 @ 2.93GHz stepping 02
Jul  3 08:46:40 zumbi kernel: [   30.367485] Booting processor 1 APIC 0x2 ip 
0x6000
Jul  3 08:46:40 zumbi kernel: [   30.378421] Initializing CPU#1
Jul  3 08:46:40 zumbi kernel: [   30.438384] Calibrating delay using timer 
specific routine.. 5865.06 BogoMIPS (lpj=2932531)
Jul  3 08:46:40 zumbi kernel: [   30.438390] CPU: Physical Processor ID: 0
Jul  3 08:46:40 zumbi kernel: [   30.438391] CPU: Processor Core ID: 1
Jul  3 08:46:40 zumbi kernel: [   30.438393] CPU: L1 I cache: 32K, L1 D cache: 
32K
Jul  3 08:46:40 zumbi kernel: [   30.438394] CPU: L2 cache: 256K
Jul  3 08:46:40 zumbi kernel: [   30.438395] CPU: L3 cache: 8192K
Jul  3 08:46:40 zumbi kernel: [   30.438989] x86 PAT enabled: cpu 1, old 
0x7040600070406, new 0x7010600070106
Jul  3 08:46:40 zumbi kernel: [   30.439594] CPU1: Genuine Intel(R) CPU         
  @ 0000 @ 2.93GHz stepping 02
Jul  3 08:46:40 zumbi kernel: [   30.444504] Skipping synchronization checks as 
TSC is reliable.
Jul  3 08:46:40 zumbi kernel: [   30.445114] Booting processor 2 APIC 0x4 ip 
0x6000
Jul  3 08:46:40 zumbi kernel: [   30.455935] Initializing CPU#2
Jul  3 08:46:40 zumbi kernel: [   30.516342] Calibrating delay using timer 
specific routine.. 5865.06 BogoMIPS (lpj=2932530)
Jul  3 08:46:40 zumbi kernel: [   30.516348] CPU: Physical Processor ID: 0
Jul  3 08:46:40 zumbi kernel: [   30.516349] CPU: Processor Core ID: 2
Jul  3 08:46:40 zumbi kernel: [   30.516351] CPU: L1 I cache: 32K, L1 D cache: 
32K
Jul  3 08:46:40 zumbi kernel: [   30.516352] CPU: L2 cache: 256K
Jul  3 08:46:40 zumbi kernel: [   30.516352] CPU: L3 cache: 8192K
Jul  3 08:46:40 zumbi kernel: [   30.516949] x86 PAT enabled: cpu 2, old 
0x7040600070406, new 0x7010600070106
Jul  3 08:46:40 zumbi kernel: [   30.517516] CPU2: Genuine Intel(R) CPU         
  @ 0000 @ 2.93GHz stepping 02
Jul  3 08:46:40 zumbi kernel: [   30.522434] Skipping synchronization checks as 
TSC is reliable.
Jul  3 08:46:40 zumbi kernel: [   30.523041] Booting processor 3 APIC 0x6 ip 
0x6000
Jul  3 08:46:40 zumbi kernel: [   30.533861] Initializing CPU#3
Jul  3 08:46:40 zumbi kernel: [   30.594300] Calibrating delay using timer 
specific routine.. 5865.05 BogoMIPS (lpj=2932529)
Jul  3 08:46:40 zumbi kernel: [   30.594306] CPU: Physical Processor ID: 0
Jul  3 08:46:40 zumbi kernel: [   30.594307] CPU: Processor Core ID: 3
Jul  3 08:46:40 zumbi kernel: [   30.594309] CPU: L1 I cache: 32K, L1 D cache: 
32K
Jul  3 08:46:40 zumbi kernel: [   30.594310] CPU: L2 cache: 256K
Jul  3 08:46:40 zumbi kernel: [   30.594310] CPU: L3 cache: 8192K
Jul  3 08:46:40 zumbi kernel: [   30.594905] x86 PAT enabled: cpu 3, old 
0x7040600070406, new 0x7010600070106
Jul  3 08:46:40 zumbi kernel: [   30.595442] CPU3: Genuine Intel(R) CPU         
  @ 0000 @ 2.93GHz stepping 02
Jul  3 08:46:40 zumbi kernel: [   30.600358] Skipping synchronization checks as 
TSC is reliable.
Jul  3 08:46:40 zumbi kernel: [   30.600970] Booting processor 4 APIC 0x1 ip 
0x6000
Jul  3 08:46:40 zumbi kernel: [   30.611791] Initializing CPU#4
Jul  3 08:46:40 zumbi kernel: [   30.672258] Calibrating delay using timer 
specific routine.. 5865.05 BogoMIPS (lpj=2932529)
Jul  3 08:46:40 zumbi kernel: [   30.672265] CPU: Physical Processor ID: 0
Jul  3 08:46:40 zumbi kernel: [   30.672266] CPU: Processor Core ID: 0
Jul  3 08:46:40 zumbi kernel: [   30.672268] CPU: L1 I cache: 32K, L1 D cache: 
32K
Jul  3 08:46:40 zumbi kernel: [   30.672269] CPU: L2 cache: 256K
Jul  3 08:46:40 zumbi kernel: [   30.672271] CPU: L3 cache: 8192K
Jul  3 08:46:40 zumbi kernel: [   30.673008] x86 PAT enabled: cpu 4, old 
0x7040600070406, new 0x7010600070106
Jul  3 08:46:40 zumbi kernel: [   30.673839] CPU4: Genuine Intel(R) CPU         
  @ 0000 @ 2.93GHz stepping 02
Jul  3 08:46:40 zumbi kernel: [   30.678754] Skipping synchronization checks as 
TSC is reliable.
Jul  3 08:46:40 zumbi kernel: [   30.679369] Booting processor 5 APIC 0x3 ip 
0x6000
Jul  3 08:46:40 zumbi kernel: [   30.690188] Initializing CPU#5
Jul  3 08:46:40 zumbi kernel: [   30.750216] Calibrating delay using timer 
specific routine.. 5865.05 BogoMIPS (lpj=2932529)
Jul  3 08:46:40 zumbi kernel: [   30.750221] CPU: Physical Processor ID: 0
Jul  3 08:46:40 zumbi kernel: [   30.750222] CPU: Processor Core ID: 1
Jul  3 08:46:40 zumbi kernel: [   30.750224] CPU: L1 I cache: 32K, L1 D cache: 
32K
Jul  3 08:46:40 zumbi kernel: [   30.750225] CPU: L2 cache: 256K
Jul  3 08:46:40 zumbi kernel: [   30.750226] CPU: L3 cache: 8192K
Jul  3 08:46:40 zumbi kernel: [   30.751014] x86 PAT enabled: cpu 5, old 
0x7040600070406, new 0x7010600070106
Jul  3 08:46:40 zumbi kernel: [   30.751871] CPU5: Genuine Intel(R) CPU         
  @ 0000 @ 2.93GHz stepping 02
Jul  3 08:46:40 zumbi kernel: [   30.756784] Skipping synchronization checks as 
TSC is reliable.
Jul  3 08:46:40 zumbi kernel: [   30.757397] Booting processor 6 APIC 0x5 ip 
0x6000
Jul  3 08:46:40 zumbi kernel: [   30.768216] Initializing CPU#6
Jul  3 08:46:40 zumbi kernel: [   30.828174] Calibrating delay using timer 
specific routine.. 5865.05 BogoMIPS (lpj=2932529)
Jul  3 08:46:40 zumbi kernel: [   30.828179] CPU: Physical Processor ID: 0
Jul  3 08:46:40 zumbi kernel: [   30.828180] CPU: Processor Core ID: 2
Jul  3 08:46:40 zumbi kernel: [   30.828182] CPU: L1 I cache: 32K, L1 D cache: 
32K
Jul  3 08:46:40 zumbi kernel: [   30.828183] CPU: L2 cache: 256K
Jul  3 08:46:40 zumbi kernel: [   30.828184] CPU: L3 cache: 8192K
Jul  3 08:46:40 zumbi kernel: [   30.828967] x86 PAT enabled: cpu 6, old 
0x7040600070406, new 0x7010600070106
Jul  3 08:46:40 zumbi kernel: [   30.829800] CPU6: Genuine Intel(R) CPU         
  @ 0000 @ 2.93GHz stepping 02
Jul  3 08:46:40 zumbi kernel: [   30.834713] Skipping synchronization checks as 
TSC is reliable.
Jul  3 08:46:40 zumbi kernel: [   30.835324] Booting processor 7 APIC 0x7 ip 
0x6000
Jul  3 08:46:40 zumbi kernel: [   30.846142] Initializing CPU#7
Jul  3 08:46:40 zumbi kernel: [   30.906131] Calibrating delay using timer 
specific routine.. 5865.05 BogoMIPS (lpj=2932528)
Jul  3 08:46:40 zumbi kernel: [   30.906137] CPU: Physical Processor ID: 0
Jul  3 08:46:40 zumbi kernel: [   30.906138] CPU: Processor Core ID: 3
Jul  3 08:46:40 zumbi kernel: [   30.906140] CPU: L1 I cache: 32K, L1 D cache: 
32K
Jul  3 08:46:40 zumbi kernel: [   30.906141] CPU: L2 cache: 256K
Jul  3 08:46:40 zumbi kernel: [   30.906141] CPU: L3 cache: 8192K
Jul  3 08:46:40 zumbi kernel: [   30.906926] x86 PAT enabled: cpu 7, old 
0x7040600070406, new 0x7010600070106
Jul  3 08:46:40 zumbi kernel: [   30.907725] CPU7: Genuine Intel(R) CPU         
  @ 0000 @ 2.93GHz stepping 02
Jul  3 08:46:40 zumbi kernel: [   30.912637] Skipping synchronization checks as 
TSC is reliable.
Jul  3 08:46:40 zumbi kernel: [   30.913206] Brought up 8 CPUs
Jul  3 08:46:40 zumbi kernel: [   30.913621] Total of 8 processors activated 
(46921.49 BogoMIPS).
Jul  3 08:46:40 zumbi kernel: [   30.914418] khelper used greatest stack depth: 
6024 bytes left
Jul  3 08:46:40 zumbi kernel: [   30.914483] net_namespace: 1832 bytes
Jul  3 08:46:40 zumbi kernel: [   30.915438] Booting paravirtualized kernel on 
bare hardware
Jul  3 08:46:40 zumbi kernel: [   30.916082] Time:  7:46:23  Date: 07/03/09
Jul  3 08:46:40 zumbi kernel: [   30.916584] NET: Registered protocol family 16
Jul  3 08:46:40 zumbi kernel: [   30.917161] err -19 in xenbus_probe_init
Jul  3 08:46:40 zumbi kernel: [   30.917739] ACPI: bus type pci registered
Jul  3 08:46:40 zumbi kernel: [   30.918283] PCI: MCFG configuration 0: base 
a0000000 segment 0 buses 0 - 255
Jul  3 08:46:40 zumbi kernel: [   30.918900] PCI: MCFG area at a0000000 
reserved in E820
Jul  3 08:46:40 zumbi kernel: [   30.926745] PCI: Using MMCONFIG at a0000000 - 
afffffff
Jul  3 08:46:40 zumbi kernel: [   30.927268] PCI: Using configuration type 1 
for base access
Jul  3 08:46:40 zumbi kernel: [   30.931356] bio: create slab <bio-0> at 0
Jul  3 08:46:40 zumbi kernel: [   30.932506] ACPI: EC: Look up EC in DSDT
Jul  3 08:46:40 zumbi kernel: [   30.948406] ACPI: Interpreter enabled
Jul  3 08:46:40 zumbi kernel: [   30.948856] ACPI: (supports S0 S1 S3 S4 S5)
Jul  3 08:46:40 zumbi kernel: [   30.949587] ACPI: Using IOAPIC for interrupt 
routing
Jul  3 08:46:40 zumbi kernel: [   30.954565] ACPI: No dock devices found.
Jul  3 08:46:40 zumbi kernel: [   30.955035] ACPI: PCI Root Bridge [PCI0] 
(0000:00)
Jul  3 08:46:40 zumbi kernel: [   30.955646] pci 0000:00:01.0: PME# supported 
from D0 D3hot D3cold
Jul  3 08:46:40 zumbi kernel: [   30.956219] pci 0000:00:01.0: PME# disabled
Jul  3 08:46:40 zumbi kernel: [   30.956736] pci 0000:00:03.0: PME# supported 
from D0 D3hot D3cold
Jul  3 08:46:40 zumbi kernel: [   30.957307] pci 0000:00:03.0: PME# disabled
Jul  3 08:46:40 zumbi kernel: [   30.957824] pci 0000:00:07.0: PME# supported 
from D0 D3hot D3cold
Jul  3 08:46:40 zumbi kernel: [   30.958396] pci 0000:00:07.0: PME# disabled
Jul  3 08:46:40 zumbi kernel: [   30.959120] pci 0000:00:1a.0: reg 20 io port: 
[0x50c0-0x50df]
Jul  3 08:46:40 zumbi kernel: [   30.959181] pci 0000:00:1a.1: reg 20 io port: 
[0x50a0-0x50bf]
Jul  3 08:46:40 zumbi kernel: [   30.959241] pci 0000:00:1a.2: reg 20 io port: 
[0x5080-0x509f]
Jul  3 08:46:40 zumbi kernel: [   30.959300] pci 0000:00:1a.7: reg 10 32bit 
mmio: [0xb7201400-0xb72017ff]
Jul  3 08:46:40 zumbi kernel: [   30.959344] pci 0000:00:1a.7: PME# supported 
from D0 D3hot D3cold
Jul  3 08:46:40 zumbi kernel: [   30.959914] pci 0000:00:1a.7: PME# disabled
Jul  3 08:46:40 zumbi kernel: [   30.960439] pci 0000:00:1c.0: PME# supported 
from D0 D3hot D3cold
Jul  3 08:46:40 zumbi kernel: [   30.961009] pci 0000:00:1c.0: PME# disabled
Jul  3 08:46:40 zumbi kernel: [   30.961535] pci 0000:00:1c.1: PME# supported 
from D0 D3hot D3cold
Jul  3 08:46:40 zumbi kernel: [   30.962106] pci 0000:00:1c.1: PME# disabled
Jul  3 08:46:40 zumbi kernel: [   30.967954] pci 0000:00:1c.4: PME# supported 
from D0 D3hot D3cold
Jul  3 08:46:40 zumbi kernel: [   30.968526] pci 0000:00:1c.4: PME# disabled
Jul  3 08:46:40 zumbi kernel: [   30.969046] pci 0000:00:1d.0: reg 20 io port: 
[0x5060-0x507f]
Jul  3 08:46:40 zumbi kernel: [   30.969107] pci 0000:00:1d.1: reg 20 io port: 
[0x5040-0x505f]
Jul  3 08:46:40 zumbi kernel: [   30.969168] pci 0000:00:1d.2: reg 20 io port: 
[0x5020-0x503f]
Jul  3 08:46:40 zumbi kernel: [   30.969226] pci 0000:00:1d.7: reg 10 32bit 
mmio: [0xb7201000-0xb72013ff]
Jul  3 08:46:40 zumbi kernel: [   30.969270] pci 0000:00:1d.7: PME# supported 
from D0 D3hot D3cold
Jul  3 08:46:40 zumbi kernel: [   30.969842] pci 0000:00:1d.7: PME# disabled
Jul  3 08:46:40 zumbi kernel: [   30.970422] pci 0000:00:1f.0: Force enabled 
HPET at 0xfed00000
Jul  3 08:46:40 zumbi kernel: [   30.970427] pci 0000:00:1f.0: quirk: region 
0400-047f claimed by ICH6 ACPI/GPIO/TCO
Jul  3 08:46:40 zumbi kernel: [   30.971297] pci 0000:00:1f.0: quirk: region 
0500-053f claimed by ICH6 GPIO
Jul  3 08:46:40 zumbi kernel: [   30.971906] pci 0000:00:1f.0: ICH7 LPC Generic 
IO decode 1 PIO at 0680 (mask 007f)
Jul  3 08:46:40 zumbi kernel: [   30.972770] pci 0000:00:1f.0: ICH7 LPC Generic 
IO decode 2 PIO at 0810 (mask 007f)
Jul  3 08:46:40 zumbi kernel: [   30.973680] pci 0000:00:1f.2: reg 10 io port: 
[0x5138-0x513f]
Jul  3 08:46:40 zumbi kernel: [   30.973684] pci 0000:00:1f.2: reg 14 io port: 
[0x514c-0x514f]
Jul  3 08:46:40 zumbi kernel: [   30.973689] pci 0000:00:1f.2: reg 18 io port: 
[0x5130-0x5137]
Jul  3 08:46:40 zumbi kernel: [   30.973693] pci 0000:00:1f.2: reg 1c io port: 
[0x5148-0x514b]
Jul  3 08:46:40 zumbi kernel: [   30.973698] pci 0000:00:1f.2: reg 20 io port: 
[0x5110-0x511f]
Jul  3 08:46:40 zumbi kernel: [   30.973703] pci 0000:00:1f.2: reg 24 io port: 
[0x5100-0x510f]
Jul  3 08:46:40 zumbi kernel: [   30.973742] pci 0000:00:1f.3: reg 10 64bit 
mmio: [0xf0000000-0xf00000ff]
Jul  3 08:46:40 zumbi kernel: [   30.973754] pci 0000:00:1f.3: reg 20 io port: 
[0x5000-0x501f]
Jul  3 08:46:40 zumbi kernel: [   30.973791] pci 0000:00:1f.5: reg 10 io port: 
[0x5128-0x512f]
Jul  3 08:46:40 zumbi kernel: [   30.973795] pci 0000:00:1f.5: reg 14 io port: 
[0x5144-0x5147]
Jul  3 08:46:40 zumbi kernel: [   30.973800] pci 0000:00:1f.5: reg 18 io port: 
[0x5120-0x5127]
Jul  3 08:46:40 zumbi kernel: [   30.973805] pci 0000:00:1f.5: reg 1c io port: 
[0x5140-0x5143]
Jul  3 08:46:40 zumbi kernel: [   30.973809] pci 0000:00:1f.5: reg 20 io port: 
[0x50f0-0x50ff]
Jul  3 08:46:40 zumbi kernel: [   30.973814] pci 0000:00:1f.5: reg 24 io port: 
[0x50e0-0x50ef]
Jul  3 08:46:40 zumbi kernel: [   30.973897] pci 0000:02:00.0: PME# supported 
from D0 D3hot D3cold
Jul  3 08:46:40 zumbi kernel: [   30.974469] pci 0000:02:00.0: PME# disabled
Jul  3 08:46:40 zumbi kernel: [   30.974963] pci 0000:00:03.0: bridge io port: 
[0x3000-0x4fff]
Jul  3 08:46:40 zumbi kernel: [   30.974966] pci 0000:00:03.0: bridge 32bit 
mmio: [0xb0000000-0xb6ffffff]
Jul  3 08:46:40 zumbi kernel: [   30.974970] pci 0000:00:03.0: bridge 64bit 
mmio pref: [0xd0000000-0xefffffff]
Jul  3 08:46:40 zumbi kernel: [   30.975005] pci 0000:03:00.0: PME# supported 
from D0 D3hot D3cold
Jul  3 08:46:40 zumbi kernel: [   30.975575] pci 0000:03:00.0: PME# disabled
Jul  3 08:46:40 zumbi kernel: [   30.976086] pci 0000:03:02.0: PME# supported 
from D0 D3hot D3cold
Jul  3 08:46:40 zumbi kernel: [   30.976657] pci 0000:03:02.0: PME# disabled
Jul  3 08:46:40 zumbi kernel: [   30.977159] pci 0000:02:00.0: bridge io port: 
[0x3000-0x4fff]
Jul  3 08:46:40 zumbi kernel: [   30.977161] pci 0000:02:00.0: bridge 32bit 
mmio: [0xb0000000-0xb6ffffff]
Jul  3 08:46:40 zumbi kernel: [   30.977166] pci 0000:02:00.0: bridge 64bit 
mmio pref: [0xd0000000-0xefffffff]
Jul  3 08:46:40 zumbi kernel: [   30.977196] pci 0000:04:00.0: reg 10 32bit 
mmio: [0xb6000000-0xb6ffffff]
Jul  3 08:46:40 zumbi kernel: [   30.977206] pci 0000:04:00.0: reg 14 64bit 
mmio: [0xe0000000-0xefffffff]
Jul  3 08:46:40 zumbi kernel: [   30.977215] pci 0000:04:00.0: reg 1c 64bit 
mmio: [0xb4000000-0xb5ffffff]
Jul  3 08:46:40 zumbi kernel: [   30.977220] pci 0000:04:00.0: reg 24 io port: 
[0x4000-0x407f]
Jul  3 08:46:40 zumbi kernel: [   30.977225] pci 0000:04:00.0: reg 30 32bit 
mmio: [0xfffe0000-0xffffffff]
Jul  3 08:46:40 zumbi kernel: [   30.977279] pci 0000:03:00.0: bridge io port: 
[0x4000-0x4fff]
Jul  3 08:46:40 zumbi kernel: [   30.977282] pci 0000:03:00.0: bridge 32bit 
mmio: [0xb4000000-0xb6ffffff]
Jul  3 08:46:40 zumbi kernel: [   30.977286] pci 0000:03:00.0: bridge 64bit 
mmio pref: [0xe0000000-0xefffffff]
Jul  3 08:46:40 zumbi kernel: [   30.977317] pci 0000:05:00.0: reg 10 32bit 
mmio: [0xb2000000-0xb2ffffff]
Jul  3 08:46:40 zumbi kernel: [   30.977327] pci 0000:05:00.0: reg 14 64bit 
mmio: [0xd0000000-0xdfffffff]
Jul  3 08:46:40 zumbi kernel: [   30.977336] pci 0000:05:00.0: reg 1c 64bit 
mmio: [0xb0000000-0xb1ffffff]
Jul  3 08:46:40 zumbi kernel: [   30.977341] pci 0000:05:00.0: reg 24 io port: 
[0x3000-0x307f]
Jul  3 08:46:40 zumbi kernel: [   30.977347] pci 0000:05:00.0: reg 30 32bit 
mmio: [0xfffe0000-0xffffffff]
Jul  3 08:46:40 zumbi kernel: [   30.977401] pci 0000:03:02.0: bridge io port: 
[0x3000-0x3fff]
Jul  3 08:46:40 zumbi kernel: [   30.977404] pci 0000:03:02.0: bridge 32bit 
mmio: [0xb0000000-0xb2ffffff]
Jul  3 08:46:40 zumbi kernel: [   30.977408] pci 0000:03:02.0: bridge 64bit 
mmio pref: [0xd0000000-0xdfffffff]
Jul  3 08:46:40 zumbi kernel: [   30.977575] pci 0000:08:00.0: reg 10 64bit 
mmio: [0xb7100000-0xb710ffff]
Jul  3 08:46:40 zumbi kernel: [   30.977641] pci 0000:08:00.0: PME# supported 
from D3hot D3cold
Jul  3 08:46:40 zumbi kernel: [   30.978247] pci 0000:08:00.0: PME# disabled
Jul  3 08:46:40 zumbi kernel: [   30.978808] pci 0000:00:1c.1: bridge 32bit 
mmio: [0xb7100000-0xb71fffff]
Jul  3 08:46:40 zumbi kernel: [   30.978853] pci 0000:09:00.0: reg 10 io port: 
[0x2018-0x201f]
Jul  3 08:46:40 zumbi kernel: [   30.978860] pci 0000:09:00.0: reg 14 io port: 
[0x2024-0x2027]
Jul  3 08:46:40 zumbi kernel: [   30.978867] pci 0000:09:00.0: reg 18 io port: 
[0x2010-0x2017]
Jul  3 08:46:40 zumbi kernel: [   30.978873] pci 0000:09:00.0: reg 1c io port: 
[0x2020-0x2023]
Jul  3 08:46:40 zumbi kernel: [   30.978880] pci 0000:09:00.0: reg 20 io port: 
[0x2000-0x200f]
Jul  3 08:46:40 zumbi kernel: [   30.978887] pci 0000:09:00.0: reg 24 32bit 
mmio: [0xb7000000-0xb70003ff]
Jul  3 08:46:40 zumbi kernel: [   30.978924] pci 0000:09:00.0: supports D1
Jul  3 08:46:40 zumbi kernel: [   30.978926] pci 0000:09:00.0: PME# supported 
from D0 D1 D3hot
Jul  3 08:46:40 zumbi kernel: [   30.979482] pci 0000:09:00.0: PME# disabled
Jul  3 08:46:40 zumbi kernel: [   30.979996] pci 0000:00:1c.4: bridge io port: 
[0x2000-0x2fff]
Jul  3 08:46:40 zumbi kernel: [   30.979999] pci 0000:00:1c.4: bridge 32bit 
mmio: [0xb7000000-0xb70fffff]
Jul  3 08:46:40 zumbi kernel: [   30.980025] pci 0000:0a:02.0: reg 10 io port: 
[0x1000-0x101f]
Jul  3 08:46:40 zumbi kernel: [   30.980093] pci 0000:00:1e.0: transparent 
bridge
Jul  3 08:46:40 zumbi kernel: [   30.980590] pci 0000:00:1e.0: bridge io port: 
[0x1000-0x1fff]
Jul  3 08:46:40 zumbi kernel: [   30.980617] pci_bus 0000:00: on NUMA node 0
Jul  3 08:46:40 zumbi kernel: [   30.980621] ACPI: PCI Interrupt Routing Table 
[\_SB_.PCI0._PRT]
Jul  3 08:46:40 zumbi kernel: [   30.981100] ACPI: PCI Interrupt Routing Table 
[\_SB_.PCI0.P32_._PRT]
Jul  3 08:46:40 zumbi kernel: [   30.981234] ACPI: PCI Interrupt Routing Table 
[\_SB_.PCI0.PEG1._PRT]
Jul  3 08:46:40 zumbi kernel: [   30.981293] ACPI: PCI Interrupt Routing Table 
[\_SB_.PCI0.PEG3._PRT]
Jul  3 08:46:40 zumbi kernel: [   30.981351] ACPI: PCI Interrupt Routing Table 
[\_SB_.PCI0.PEG7._PRT]
Jul  3 08:46:40 zumbi kernel: [   30.981410] ACPI: PCI Interrupt Routing Table 
[\_SB_.PCI0.PEX1._PRT]
Jul  3 08:46:40 zumbi kernel: [   30.981471] ACPI: PCI Interrupt Routing Table 
[\_SB_.PCI0.PEX4._PRT]
Jul  3 08:46:40 zumbi kernel: [   30.987330] ACPI: PCI Interrupt Link [LNKA] 
(IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Jul  3 08:46:40 zumbi kernel: [   30.988898] ACPI: PCI Interrupt Link [LNKB] 
(IRQs 3 4 5 6 7 9 *10 11 12 14 15)
Jul  3 08:46:40 zumbi kernel: [   30.990464] ACPI: PCI Interrupt Link [LNKC] 
(IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Jul  3 08:46:40 zumbi kernel: [   30.992030] ACPI: PCI Interrupt Link [LNKD] 
(IRQs 3 4 *5 6 7 9 10 11 12 14 15)
Jul  3 08:46:40 zumbi kernel: [   30.993598] ACPI: PCI Interrupt Link [LNKE] 
(IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Jul  3 08:46:40 zumbi kernel: [   30.995313] ACPI: PCI Interrupt Link [LNKF] 
(IRQs 3 4 5 6 7 9 *10 11 12 14 15)
Jul  3 08:46:40 zumbi kernel: [   30.996876] ACPI: PCI Interrupt Link [LNKG] 
(IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Jul  3 08:46:40 zumbi kernel: [   30.998597] ACPI: PCI Interrupt Link [LNKH] 
(IRQs 3 4 *5 6 7 9 10 11 12 14 15)
Jul  3 08:46:40 zumbi kernel: [   31.000162] xenbus_probe_backend_init bus 
registered ok
Jul  3 08:46:40 zumbi kernel: [   31.000709] xenbus_probe_frontend_init bus 
registered ok
Jul  3 08:46:40 zumbi kernel: [   31.001348] SCSI subsystem initialized
Jul  3 08:46:40 zumbi kernel: [   31.001880] libata version 3.00 loaded.
Jul  3 08:46:40 zumbi kernel: [   31.002014] usbcore: registered new interface 
driver usbfs
Jul  3 08:46:40 zumbi kernel: [   31.002577] usbcore: registered new interface 
driver hub
Jul  3 08:46:40 zumbi kernel: [   31.003136] usbcore: registered new device 
driver usb
Jul  3 08:46:40 zumbi kernel: [   31.003785] PCI: Using ACPI for IRQ routing
Jul  3 08:46:40 zumbi kernel: [   31.022122] cfg80211: Using static regulatory 
domain info
Jul  3 08:46:40 zumbi kernel: [   31.022663] cfg80211: Regulatory domain: US
Jul  3 08:46:40 zumbi kernel: [   31.023139] ^I(start_freq - end_freq @ 
bandwidth), (max_antenna_gain, max_eirp)
Jul  3 08:46:40 zumbi kernel: [   31.023985] ^I(2402000 KHz - 2472000 KHz @ 
40000 KHz), (600 mBi, 2700 mBm)
Jul  3 08:46:40 zumbi kernel: [   31.024589] ^I(5170000 KHz - 5190000 KHz @ 
40000 KHz), (600 mBi, 2300 mBm)
Jul  3 08:46:40 zumbi kernel: [   31.025194] ^I(5190000 KHz - 5210000 KHz @ 
40000 KHz), (600 mBi, 2300 mBm)
Jul  3 08:46:40 zumbi kernel: [   31.025798] ^I(5210000 KHz - 5230000 KHz @ 
40000 KHz), (600 mBi, 2300 mBm)
Jul  3 08:46:40 zumbi kernel: [   31.026402] ^I(5230000 KHz - 5330000 KHz @ 
40000 KHz), (600 mBi, 2300 mBm)
Jul  3 08:46:40 zumbi kernel: [   31.027005] ^I(5735000 KHz - 5835000 KHz @ 
40000 KHz), (600 mBi, 3000 mBm)
Jul  3 08:46:40 zumbi kernel: [   31.027609] NetLabel: Initializing
Jul  3 08:46:40 zumbi kernel: [   31.028044] NetLabel:  domain hash size = 128
Jul  3 08:46:40 zumbi kernel: [   31.028528] NetLabel:  protocols = UNLABELED 
CIPSOv4
Jul  3 08:46:40 zumbi kernel: [   31.029045] NetLabel:  unlabeled traffic 
allowed by default
Jul  3 08:46:40 zumbi kernel: [   31.029597] cfg80211: Calling CRDA for 
country: US
Jul  3 08:46:40 zumbi kernel: [   31.030238] hpet clockevent registered
Jul  3 08:46:40 zumbi kernel: [   31.030241] HPET: 4 timers in total, 0 timers 
will be used for per-cpu timer
Jul  3 08:46:40 zumbi kernel: [   31.030861] hpet0: at MMIO 0xfed00000, IRQs 2, 
8, 0, 0
Jul  3 08:46:40 zumbi kernel: [   31.031626] hpet0: 4 comparators, 64-bit 
14.318180 MHz counter
Jul  3 08:46:40 zumbi kernel: [   31.040076] Switched to high resolution mode 
on CPU 0
Jul  3 08:46:40 zumbi kernel: [   31.040200] Switched to high resolution mode 
on CPU 3
Jul  3 08:46:40 zumbi kernel: [   31.040202] Switched to high resolution mode 
on CPU 1
Jul  3 08:46:40 zumbi kernel: [   31.040205] Switched to high resolution mode 
on CPU 2
Jul  3 08:46:40 zumbi kernel: [   31.040569] Switched to high resolution mode 
on CPU 4
Jul  3 08:46:40 zumbi kernel: [   31.040629] Switched to high resolution mode 
on CPU 6
Jul  3 08:46:40 zumbi kernel: [   31.040633] Switched to high resolution mode 
on CPU 7
Jul  3 08:46:40 zumbi kernel: [   31.040659] Switched to high resolution mode 
on CPU 5
Jul  3 08:46:40 zumbi kernel: [   31.044079] pnp: PnP ACPI init
Jul  3 08:46:40 zumbi kernel: [   31.044508] ACPI: bus type pnp registered
Jul  3 08:46:40 zumbi kernel: [   31.046501] pnp: PnP ACPI: found 8 devices
Jul  3 08:46:40 zumbi kernel: [   31.046971] ACPI: ACPI bus type pnp 
unregistered
Jul  3 08:46:40 zumbi kernel: [   31.047476] system 00:05: ioport range 
0x500-0x53f has been reserved
Jul  3 08:46:40 zumbi kernel: [   31.048057] system 00:05: ioport range 
0x400-0x47f has been reserved
Jul  3 08:46:40 zumbi kernel: [   31.048642] system 00:05: ioport range 
0x680-0x6ff has been reserved
Jul  3 08:46:40 zumbi kernel: [   31.054066] pci 0000:00:01.0: PCI bridge, 
secondary bus 0000:01
Jul  3 08:46:40 zumbi kernel: [   31.054629] pci 0000:00:01.0:   IO window: 
disabled
Jul  3 08:46:40 zumbi kernel: [   31.055141] pci 0000:00:01.0:   MEM window: 
disabled
Jul  3 08:46:40 zumbi kernel: [   31.055655] pci 0000:00:01.0:   PREFETCH 
window: disabled
Jul  3 08:46:40 zumbi kernel: [   31.056194] pci 0000:04:00.0: BAR 6: can't 
allocate mem resource [0xf0000000-0xefffffff]
Jul  3 08:46:40 zumbi kernel: [   31.057080] pci 0000:03:00.0: PCI bridge, 
secondary bus 0000:04
Jul  3 08:46:40 zumbi kernel: [   31.057640] pci 0000:03:00.0:   IO window: 
0x4000-0x4fff
Jul  3 08:46:40 zumbi kernel: [   31.058173] pci 0000:03:00.0:   MEM window: 
0xb4000000-0xb6ffffff
Jul  3 08:46:40 zumbi kernel: [   31.058742] pci 0000:03:00.0:   PREFETCH 
window: 0x000000e0000000-0x000000efffffff
Jul  3 08:46:40 zumbi kernel: [   31.059609] pci 0000:05:00.0: BAR 6: can't 
allocate mem resource [0xe0000000-0xdfffffff]
Jul  3 08:46:40 zumbi kernel: [   31.060497] pci 0000:03:02.0: PCI bridge, 
secondary bus 0000:05
Jul  3 08:46:40 zumbi kernel: [   31.061058] pci 0000:03:02.0:   IO window: 
0x3000-0x3fff
Jul  3 08:46:40 zumbi kernel: [   31.061591] pci 0000:03:02.0:   MEM window: 
0xb0000000-0xb2ffffff
Jul  3 08:46:40 zumbi kernel: [   31.062161] pci 0000:03:02.0:   PREFETCH 
window: 0x000000d0000000-0x000000dfffffff
Jul  3 08:46:40 zumbi kernel: [   31.063024] pci 0000:02:00.0: PCI bridge, 
secondary bus 0000:03
Jul  3 08:46:40 zumbi kernel: [   31.063584] pci 0000:02:00.0:   IO window: 
0x3000-0x4fff
Jul  3 08:46:40 zumbi kernel: [   31.064118] pci 0000:02:00.0:   MEM window: 
0xb0000000-0xb6ffffff
Jul  3 08:46:40 zumbi kernel: [   31.064687] pci 0000:02:00.0:   PREFETCH 
window: 0x000000d0000000-0x000000efffffff
Jul  3 08:46:40 zumbi kernel: [   31.065553] pci 0000:00:03.0: PCI bridge, 
secondary bus 0000:02
Jul  3 08:46:40 zumbi kernel: [   31.066116] pci 0000:00:03.0:   IO window: 
0x3000-0x4fff
Jul  3 08:46:40 zumbi kernel: [   31.066648] pci 0000:00:03.0:   MEM window: 
0xb0000000-0xb6ffffff
Jul  3 08:46:40 zumbi kernel: [   31.067219] pci 0000:00:03.0:   PREFETCH 
window: 0x000000d0000000-0x000000efffffff
Jul  3 08:46:40 zumbi kernel: [   31.068086] pci 0000:00:07.0: PCI bridge, 
secondary bus 0000:06
Jul  3 08:46:40 zumbi kernel: [   31.068647] pci 0000:00:07.0:   IO window: 
disabled
Jul  3 08:46:40 zumbi kernel: [   31.069157] pci 0000:00:07.0:   MEM window: 
disabled
Jul  3 08:46:40 zumbi kernel: [   31.069672] pci 0000:00:07.0:   PREFETCH 
window: disabled
Jul  3 08:46:40 zumbi kernel: [   31.070211] pci 0000:00:1c.0: PCI bridge, 
secondary bus 0000:07
Jul  3 08:46:40 zumbi kernel: [   31.070771] pci 0000:00:1c.0:   IO window: 
disabled
Jul  3 08:46:40 zumbi kernel: [   31.071282] pci 0000:00:1c.0:   MEM window: 
disabled
Jul  3 08:46:40 zumbi kernel: [   31.071798] pci 0000:00:1c.0:   PREFETCH 
window: disabled
Jul  3 08:46:40 zumbi kernel: [   31.072337] pci 0000:00:1c.1: PCI bridge, 
secondary bus 0000:08
Jul  3 08:46:40 zumbi kernel: [   31.072896] pci 0000:00:1c.1:   IO window: 
disabled
Jul  3 08:46:40 zumbi kernel: [   31.073409] pci 0000:00:1c.1:   MEM window: 
0xb7100000-0xb71fffff
Jul  3 08:46:40 zumbi kernel: [   31.073980] pci 0000:00:1c.1:   PREFETCH 
window: disabled
Jul  3 08:46:40 zumbi kernel: [   31.074518] pci 0000:00:1c.4: PCI bridge, 
secondary bus 0000:09
Jul  3 08:46:40 zumbi kernel: [   31.075080] pci 0000:00:1c.4:   IO window: 
0x2000-0x2fff
Jul  3 08:46:40 zumbi kernel: [   31.075612] pci 0000:00:1c.4:   MEM window: 
0xb7000000-0xb70fffff
Jul  3 08:46:40 zumbi kernel: [   31.076183] pci 0000:00:1c.4:   PREFETCH 
window: disabled
Jul  3 08:46:40 zumbi kernel: [   31.076722] pci 0000:00:1e.0: PCI bridge, 
secondary bus 0000:0a
Jul  3 08:46:40 zumbi kernel: [   31.077285] pci 0000:00:1e.0:   IO window: 
0x1000-0x1fff
Jul  3 08:46:40 zumbi kernel: [   31.077818] pci 0000:00:1e.0:   MEM window: 
disabled
Jul  3 08:46:40 zumbi kernel: [   31.078335] pci 0000:00:1e.0:   PREFETCH 
window: disabled
Jul  3 08:46:40 zumbi kernel: [   31.078876]   alloc irq_desc for 16 on node -1
Jul  3 08:46:40 zumbi kernel: [   31.078877]   alloc kstat_irqs on node -1
Jul  3 08:46:40 zumbi kernel: [   31.078881] pci 0000:00:01.0: PCI INT A -> GSI 
16 (level, low) -> IRQ 16
Jul  3 08:46:40 zumbi kernel: [   31.079483] pci 0000:00:01.0: setting latency 
timer to 64
Jul  3 08:46:40 zumbi kernel: [   31.079488] pci 0000:00:03.0: PCI INT A -> GSI 
16 (level, low) -> IRQ 16
Jul  3 08:46:40 zumbi kernel: [   31.080089] pci 0000:00:03.0: setting latency 
timer to 64
Jul  3 08:46:40 zumbi kernel: [   31.080094] pci 0000:02:00.0: setting latency 
timer to 64
Jul  3 08:46:40 zumbi kernel: [   31.080099] pci 0000:03:00.0: setting latency 
timer to 64
Jul  3 08:46:40 zumbi kernel: [   31.080103] pci 0000:03:02.0: setting latency 
timer to 64
Jul  3 08:46:40 zumbi kernel: [   31.080107] pci 0000:00:07.0: PCI INT A -> GSI 
16 (level, low) -> IRQ 16
Jul  3 08:46:40 zumbi kernel: [   31.080708] pci 0000:00:07.0: setting latency 
timer to 64
Jul  3 08:46:40 zumbi kernel: [   31.080712]   alloc irq_desc for 17 on node -1
Jul  3 08:46:40 zumbi kernel: [   31.080713]   alloc kstat_irqs on node -1
Jul  3 08:46:40 zumbi kernel: [   31.080716] pci 0000:00:1c.0: PCI INT A -> GSI 
17 (level, low) -> IRQ 17
Jul  3 08:46:40 zumbi kernel: [   31.081320] pci 0000:00:1c.0: setting latency 
timer to 64
Jul  3 08:46:40 zumbi kernel: [   31.081324] pci 0000:00:1c.1: PCI INT B -> GSI 
16 (level, low) -> IRQ 16
Jul  3 08:46:40 zumbi kernel: [   31.081924] pci 0000:00:1c.1: setting latency 
timer to 64
Jul  3 08:46:40 zumbi kernel: [   31.081929] pci 0000:00:1c.4: PCI INT A -> GSI 
17 (level, low) -> IRQ 17
Jul  3 08:46:40 zumbi kernel: [   31.082530] pci 0000:00:1c.4: setting latency 
timer to 64
Jul  3 08:46:40 zumbi kernel: [   31.082534] pci 0000:00:1e.0: setting latency 
timer to 64
Jul  3 08:46:40 zumbi kernel: [   31.082537] pci_bus 0000:00: resource 0 io:  
[0x00-0xffff]
Jul  3 08:46:40 zumbi kernel: [   31.082539] pci_bus 0000:00: resource 1 mem: 
[0x000000-0xffffffffffffffff]
Jul  3 08:46:40 zumbi kernel: [   31.082540] pci_bus 0000:02: resource 0 io:  
[0x3000-0x4fff]
Jul  3 08:46:40 zumbi kernel: [   31.082542] pci_bus 0000:02: resource 1 mem: 
[0xb0000000-0xb6ffffff]
Jul  3 08:46:40 zumbi kernel: [   31.082544] pci_bus 0000:02: resource 2 pref 
mem [0xd0000000-0xefffffff]
Jul  3 08:46:40 zumbi kernel: [   31.082545] pci_bus 0000:03: resource 0 io:  
[0x3000-0x4fff]
Jul  3 08:46:40 zumbi kernel: [   31.082547] pci_bus 0000:03: resource 1 mem: 
[0xb0000000-0xb6ffffff]
Jul  3 08:46:40 zumbi kernel: [   31.082548] pci_bus 0000:03: resource 2 pref 
mem [0xd0000000-0xefffffff]
Jul  3 08:46:40 zumbi kernel: [   31.082550] pci_bus 0000:04: resource 0 io:  
[0x4000-0x4fff]
Jul  3 08:46:40 zumbi kernel: [   31.082552] pci_bus 0000:04: resource 1 mem: 
[0xb4000000-0xb6ffffff]
Jul  3 08:46:40 zumbi kernel: [   31.082553] pci_bus 0000:04: resource 2 pref 
mem [0xe0000000-0xefffffff]
Jul  3 08:46:40 zumbi kernel: [   31.082555] pci_bus 0000:05: resource 0 io:  
[0x3000-0x3fff]
Jul  3 08:46:40 zumbi kernel: [   31.082556] pci_bus 0000:05: resource 1 mem: 
[0xb0000000-0xb2ffffff]
Jul  3 08:46:40 zumbi kernel: [   31.082558] pci_bus 0000:05: resource 2 pref 
mem [0xd0000000-0xdfffffff]
Jul  3 08:46:40 zumbi kernel: [   31.082560] pci_bus 0000:08: resource 1 mem: 
[0xb7100000-0xb71fffff]
Jul  3 08:46:40 zumbi kernel: [   31.082561] pci_bus 0000:09: resource 0 io:  
[0x2000-0x2fff]
Jul  3 08:46:40 zumbi kernel: [   31.082563] pci_bus 0000:09: resource 1 mem: 
[0xb7000000-0xb70fffff]
Jul  3 08:46:40 zumbi kernel: [   31.082564] pci_bus 0000:0a: resource 0 io:  
[0x1000-0x1fff]
Jul  3 08:46:40 zumbi kernel: [   31.082566] pci_bus 0000:0a: resource 3 io:  
[0x00-0xffff]
Jul  3 08:46:40 zumbi kernel: [   31.082567] pci_bus 0000:0a: resource 4 mem: 
[0x000000-0xffffffffffffffff]
Jul  3 08:46:40 zumbi kernel: [   31.082585] NET: Registered protocol family 2
Jul  3 08:46:40 zumbi kernel: [   31.096108] IP route cache hash table entries: 
131072 (order: 8, 1048576 bytes)
Jul  3 08:46:40 zumbi kernel: [   31.097179] TCP established hash table 
entries: 262144 (order: 10, 4194304 bytes)
Jul  3 08:46:40 zumbi kernel: [   31.098621] TCP bind hash table entries: 65536 
(order: 8, 1048576 bytes)
Jul  3 08:46:40 zumbi kernel: [   31.099365] TCP: Hash tables configured 
(established 262144 bind 65536)
Jul  3 08:46:40 zumbi kernel: [   31.099960] TCP reno registered
Jul  3 08:46:40 zumbi kernel: [   31.104150] NET: Registered protocol family 1
Jul  3 08:46:40 zumbi kernel: [   31.104671] Trying to unpack rootfs image as 
initramfs...
Jul  3 08:46:40 zumbi kernel: [   31.170961] Freeing initrd memory: 3497k freed
Jul  3 08:46:40 zumbi kernel: [   31.172079] kvm: already loaded the other 
module
Jul  3 08:46:40 zumbi kernel: [   31.172658] [ds] bts selftest...no resume 
progress/overflow...passed.
Jul  3 08:46:40 zumbi kernel: [   31.176515] microcode: CPU0 sig=0x106a2, 
pf=0x2, revision=0xffff0013
Jul  3 08:46:40 zumbi kernel: [   31.177104] microcode: CPU1 sig=0x106a2, 
pf=0x2, revision=0xffff0013
Jul  3 08:46:40 zumbi kernel: [   31.177689] microcode: CPU2 sig=0x106a2, 
pf=0x2, revision=0xffff0013
Jul  3 08:46:40 zumbi kernel: [   31.178274] microcode: CPU3 sig=0x106a2, 
pf=0x2, revision=0xffff0013
Jul  3 08:46:40 zumbi kernel: [   31.178861] microcode: CPU4 sig=0x106a2, 
pf=0x2, revision=0xffff0013
Jul  3 08:46:40 zumbi kernel: [   31.179451] microcode: CPU5 sig=0x106a2, 
pf=0x2, revision=0xffff0013
Jul  3 08:46:40 zumbi kernel: [   31.180037] microcode: CPU6 sig=0x106a2, 
pf=0x2, revision=0xffff0013
Jul  3 08:46:40 zumbi kernel: [   31.180623] microcode: CPU7 sig=0x106a2, 
pf=0x2, revision=0xffff0013
Jul  3 08:46:40 zumbi kernel: [   31.181231] Microcode Update Driver: v2.00 
<tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
Jul  3 08:46:40 zumbi kernel: [   31.182109] Scanning for low memory corruption 
every 60 seconds
Jul  3 08:46:40 zumbi kernel: [   31.182809] audit: initializing netlink socket 
(disabled)
Jul  3 08:46:40 zumbi kernel: [   31.183353] type=2000 audit(1246607182.843:1): 
initialized
Jul  3 08:46:40 zumbi kernel: [   31.194055] HugeTLB registered 2 MB page size, 
pre-allocated 0 pages
Jul  3 08:46:40 zumbi kernel: [   31.196233] VFS: Disk quotas dquot_6.5.2
Jul  3 08:46:40 zumbi kernel: [   31.196744] Dquot-cache hash table entries: 
512 (order 0, 4096 bytes)
Jul  3 08:46:40 zumbi kernel: [   31.197846] msgmni has been set to 7894
Jul  3 08:46:40 zumbi kernel: [   31.198375] SELinux:  Registering netfilter 
hooks
Jul  3 08:46:40 zumbi kernel: [   31.198644] alg: No test for stdrng (krng)
Jul  3 08:46:40 zumbi kernel: [   31.199178] Block layer SCSI generic (bsg) 
driver version 0.4 loaded (major 252)
Jul  3 08:46:40 zumbi kernel: [   31.200035] io scheduler noop registered
Jul  3 08:46:40 zumbi kernel: [   31.200496] io scheduler anticipatory 
registered
Jul  3 08:46:40 zumbi kernel: [   31.200990] io scheduler deadline registered
Jul  3 08:46:40 zumbi kernel: [   31.201474] io scheduler cfq registered 
(default)
Jul  3 08:46:40 zumbi kernel: [   31.201990] pci 0000:00:1a.0: 
uhci_check_and_reset_hc: legsup = 0x0f10
Jul  3 08:46:40 zumbi kernel: [   31.201992] pci 0000:00:1a.0: Performing full 
reset
Jul  3 08:46:40 zumbi kernel: [   31.202005] pci 0000:00:1a.1: 
uhci_check_and_reset_hc: legsup = 0x0010
Jul  3 08:46:40 zumbi kernel: [   31.202007] pci 0000:00:1a.1: Performing full 
reset
Jul  3 08:46:40 zumbi kernel: [   31.202020] pci 0000:00:1a.2: 
uhci_check_and_reset_hc: legsup = 0x0010
Jul  3 08:46:40 zumbi kernel: [   31.202022] pci 0000:00:1a.2: Performing full 
reset
Jul  3 08:46:40 zumbi kernel: [   31.202154] pci 0000:00:1d.0: 
uhci_check_and_reset_hc: legsup = 0x0f10
Jul  3 08:46:40 zumbi kernel: [   31.202155] pci 0000:00:1d.0: Performing full 
reset
Jul  3 08:46:40 zumbi kernel: [   31.202168] pci 0000:00:1d.1: 
uhci_check_and_reset_hc: legsup = 0x0010
Jul  3 08:46:40 zumbi kernel: [   31.202169] pci 0000:00:1d.1: Performing full 
reset
Jul  3 08:46:40 zumbi kernel: [   31.202183] pci 0000:00:1d.2: 
uhci_check_and_reset_hc: legsup = 0x0010
Jul  3 08:46:40 zumbi kernel: [   31.202184] pci 0000:00:1d.2: Performing full 
reset
Jul  3 08:46:40 zumbi kernel: [   31.202349] pci 0000:05:00.0: Boot video device
Jul  3 08:46:40 zumbi kernel: [   31.202445] pcieport-driver 0000:00:01.0: 
setting latency timer to 64
Jul  3 08:46:40 zumbi kernel: [   31.202543] pcieport-driver 0000:00:03.0: 
setting latency timer to 64
Jul  3 08:46:40 zumbi kernel: [   31.202637] pcieport-driver 0000:00:07.0: 
setting latency timer to 64
Jul  3 08:46:40 zumbi kernel: [   31.202733] pcieport-driver 0000:00:1c.0: 
setting latency timer to 64
Jul  3 08:46:40 zumbi kernel: [   31.202832] pcieport-driver 0000:00:1c.1: 
setting latency timer to 64
Jul  3 08:46:40 zumbi kernel: [   31.202932] pcieport-driver 0000:00:1c.4: 
setting latency timer to 64
Jul  3 08:46:40 zumbi kernel: [   31.203111] aer 0000:00:01.0:pcie02: AER 
service couldn't init device: no _OSC support
Jul  3 08:46:40 zumbi kernel: [   31.203116] aer 0000:00:03.0:pcie02: AER 
service couldn't init device: no _OSC support
Jul  3 08:46:40 zumbi kernel: [   31.203119] aer 0000:00:07.0:pcie02: AER 
service couldn't init device: no _OSC support
Jul  3 08:46:40 zumbi kernel: [   31.203138] pci_hotplug: PCI Hot Plug PCI Core 
version: 0.5
Jul  3 08:46:40 zumbi kernel: [   31.203832] input: Power Button as 
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
Jul  3 08:46:40 zumbi kernel: [   31.204689] ACPI: Power Button [PWRF]
Jul  3 08:46:40 zumbi kernel: [   31.205188] input: Sleep Button as 
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
Jul  3 08:46:40 zumbi kernel: [   31.206084] ACPI: Sleep Button [SLPB]
Jul  3 08:46:40 zumbi kernel: [   31.206976] ACPI Warning 
(processor_throttling-0843): Invalid throttling state, reset
Jul  3 08:46:40 zumbi kernel: [   31.207903]  [20090320]
Jul  3 08:46:40 zumbi kernel: [   31.208396] Monitor-Mwait will be used to 
enter C-1 state
Jul  3 08:46:40 zumbi kernel: [   31.208411] Monitor-Mwait will be used to 
enter C-2 state
Jul  3 08:46:40 zumbi kernel: [   31.208424] Monitor-Mwait will be used to 
enter C-3 state
Jul  3 08:46:40 zumbi kernel: [   31.208455] ACPI: CPU0 (power states: C1[C1] 
C2[C2] C3[C3])
Jul  3 08:46:40 zumbi kernel: [   31.209220] processor ACPI_CPU:00: registered 
as cooling_device0
Jul  3 08:46:40 zumbi kernel: [   31.209786] ACPI: Processor [CPU0] (supports 8 
throttling states)
Jul  3 08:46:40 zumbi kernel: [   31.210831] ACPI Warning 
(processor_throttling-0843): Invalid throttling state, reset
Jul  3 08:46:40 zumbi kernel: [   31.211759]  [20090320]
Jul  3 08:46:40 zumbi kernel: [   31.212312] ACPI: CPU1 (power states: C1[C1] 
C2[C2] C3[C3])
Jul  3 08:46:40 zumbi kernel: [   31.213079] processor ACPI_CPU:02: registered 
as cooling_device1
Jul  3 08:46:40 zumbi kernel: [   31.213647] ACPI: Processor [CPU2] (supports 8 
throttling states)
Jul  3 08:46:40 zumbi kernel: [   31.220019] ACPI Warning 
(processor_throttling-0843): Invalid throttling state, reset
Jul  3 08:46:40 zumbi kernel: [   31.220946]  [20090320]
Jul  3 08:46:40 zumbi kernel: [   31.221501] ACPI: CPU2 (power states: C1[C1] 
C2[C2] C3[C3])
Jul  3 08:46:40 zumbi kernel: [   31.222265] processor ACPI_CPU:04: registered 
as cooling_device2
Jul  3 08:46:40 zumbi kernel: [   31.222833] ACPI: Processor [CPU4] (supports 8 
throttling states)
Jul  3 08:46:40 zumbi kernel: [   31.223880] ACPI Warning 
(processor_throttling-0843): Invalid throttling state, reset
Jul  3 08:46:40 zumbi kernel: [   31.224805]  [20090320]
Jul  3 08:46:40 zumbi kernel: [   31.225360] ACPI: CPU3 (power states: C1[C1] 
C2[C2] C3[C3])
Jul  3 08:46:40 zumbi kernel: [   31.226124] processor ACPI_CPU:06: registered 
as cooling_device3
Jul  3 08:46:40 zumbi kernel: [   31.226693] ACPI: Processor [CPU6] (supports 8 
throttling states)
Jul  3 08:46:40 zumbi kernel: [   31.227747] ACPI Warning 
(processor_throttling-0843): Invalid throttling state, reset
Jul  3 08:46:40 zumbi kernel: [   31.228674]  [20090320]
Jul  3 08:46:40 zumbi kernel: [   31.229230] ACPI: CPU4 (power states: C1[C1] 
C2[C2] C3[C3])
Jul  3 08:46:40 zumbi kernel: [   31.229995] processor ACPI_CPU:08: registered 
as cooling_device4
Jul  3 08:46:40 zumbi kernel: [   31.230564] ACPI: Processor [CPU8] (supports 8 
throttling states)
Jul  3 08:46:40 zumbi kernel: [   31.231611] ACPI Warning 
(processor_throttling-0843): Invalid throttling state, reset
Jul  3 08:46:40 zumbi kernel: [   31.232537]  [20090320]
Jul  3 08:46:40 zumbi kernel: [   31.233080] ACPI: CPU5 (power states: C1[C1] 
C2[C2] C3[C3])
Jul  3 08:46:40 zumbi kernel: [   31.233845] processor ACPI_CPU:0a: registered 
as cooling_device5
Jul  3 08:46:40 zumbi kernel: [   31.234415] ACPI: Processor [CPUA] (supports 8 
throttling states)
Jul  3 08:46:40 zumbi kernel: [   31.235462] ACPI Warning 
(processor_throttling-0843): Invalid throttling state, reset
Jul  3 08:46:40 zumbi kernel: [   31.236388]  [20090320]
Jul  3 08:46:40 zumbi kernel: [   31.236930] ACPI: CPU6 (power states: C1[C1] 
C2[C2] C3[C3])
Jul  3 08:46:40 zumbi kernel: [   31.237699] processor ACPI_CPU:0c: registered 
as cooling_device6
Jul  3 08:46:40 zumbi kernel: [   31.238267] ACPI: Processor [CPUC] (supports 8 
throttling states)
Jul  3 08:46:40 zumbi kernel: [   31.239318] ACPI Warning 
(processor_throttling-0843): Invalid throttling state, reset
Jul  3 08:46:40 zumbi kernel: [   31.240243]  [20090320]
Jul  3 08:46:40 zumbi kernel: [   31.240786] ACPI: CPU7 (power states: C1[C1] 
C2[C2] C3[C3])
Jul  3 08:46:40 zumbi kernel: [   31.241552] processor ACPI_CPU:0e: registered 
as cooling_device7
Jul  3 08:46:40 zumbi kernel: [   31.242119] ACPI: Processor [CPUE] (supports 8 
throttling states)
Jul  3 08:46:40 zumbi kernel: [   31.244124] ***blkif_init
Jul  3 08:46:40 zumbi kernel: [   31.244525] *** netif_init
Jul  3 08:46:40 zumbi kernel: [   31.244926] xenfs: not registering filesystem 
on non-xen platform
Jul  3 08:46:40 zumbi kernel: [   31.247115] Non-volatile memory driver v1.3
Jul  3 08:46:40 zumbi kernel: [   31.247649] Linux agpgart interface v0.103
Jul  3 08:46:40 zumbi kernel: [   31.248170] [drm] Initialized drm 1.1.0 
20060810
Jul  3 08:46:40 zumbi kernel: [   31.248708] Serial: 8250/16550 driver, 4 
ports, IRQ sharing enabled
Jul  3 08:46:40 zumbi kernel: [   31.493028] serial8250: ttyS1 at I/O 0x2f8 
(irq = 3) is a NS16550A
Jul  3 08:46:40 zumbi kernel: [   31.493802]   alloc irq_desc for 18 on node -1
Jul  3 08:46:40 zumbi kernel: [   31.493803]   alloc kstat_irqs on node -1
Jul  3 08:46:40 zumbi kernel: [   31.493808] serial 0000:0a:02.0: PCI INT A -> 
GSI 18 (level, low) -> IRQ 18
Jul  3 08:46:40 zumbi kernel: [   31.494499] 0000:0a:02.0: ttyS0 at I/O 0x1000 
(irq = 18) is a 16550A
Jul  3 08:46:40 zumbi kernel: [   31.495429] 0000:0a:02.0: ttyS2 at I/O 0x1008 
(irq = 18) is a 16550A
Jul  3 08:46:40 zumbi kernel: [   31.497226] brd: module loaded
Jul  3 08:46:40 zumbi kernel: [   31.498213] loop: module loaded
Jul  3 08:46:40 zumbi kernel: [   31.498799] input: Macintosh mouse button 
emulation as /devices/virtual/input/input2
Jul  3 08:46:40 zumbi kernel: [   31.500040] Driver 'sd' needs updating - 
please use bus_type methods
Jul  3 08:46:40 zumbi kernel: [   31.500893] Driver 'sr' needs updating - 
please use bus_type methods
Jul  3 08:46:40 zumbi kernel: [   31.501781] ahci 0000:09:00.0: version 3.0
Jul  3 08:46:40 zumbi kernel: [   31.501789] ahci 0000:09:00.0: PCI INT A -> 
GSI 16 (level, low) -> IRQ 16
Jul  3 08:46:40 zumbi kernel: [   31.502674] ahci 0000:09:00.0: controller 
can't do NCQ, turning off CAP_NCQ
Jul  3 08:46:40 zumbi kernel: [   31.503562] ahci 0000:09:00.0: controller 
can't do PMP, turning off CAP_PMP
Jul  3 08:46:40 zumbi kernel: [   31.504450] ahci 0000:09:00.0: MV_AHCI HACK: 
port_map 7 -> 3
Jul  3 08:46:40 zumbi kernel: [   31.505219] ahci 0000:09:00.0: Disabling your 
PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.
Jul  3 08:46:40 zumbi kernel: [   31.506645] ahci: SSS flag set, parallel bus 
scan disabled
Jul  3 08:46:40 zumbi kernel: [   31.507433] ahci 0000:09:00.0: AHCI 0001.0000 
32 slots 3 ports 3 Gbps 0x3 impl IDE mode
Jul  3 08:46:40 zumbi kernel: [   31.508634] ahci 0000:09:00.0: flags: 64bit 
stag led slum part 
Jul  3 08:46:40 zumbi kernel: [   31.509432] ahci 0000:09:00.0: setting latency 
timer to 64
Jul  3 08:46:40 zumbi kernel: [   31.509513] scsi0 : ahci
Jul  3 08:46:40 zumbi kernel: [   31.510080] scsi1 : ahci
Jul  3 08:46:40 zumbi kernel: [   31.510633] scsi2 : ahci
Jul  3 08:46:40 zumbi kernel: [   31.511182] ata1: SATA max UDMA/133 abar 
m1024@0xb7000000 port 0xb7000100 irq 16
Jul  3 08:46:40 zumbi kernel: [   31.512331] ata2: SATA max UDMA/133 abar 
m1024@0xb7000000 port 0xb7000180 irq 16
Jul  3 08:46:40 zumbi kernel: [   31.513477] ata3: DUMMY
Jul  3 08:46:40 zumbi kernel: [   31.818815] ata1: SATA link down (SStatus 0 
SControl 300)
Jul  3 08:46:40 zumbi kernel: [   32.123705] ata2: SATA link down (SStatus 0 
SControl 300)
Jul  3 08:46:40 zumbi kernel: [   32.124500] ata_piix 0000:00:1f.2: version 2.13
Jul  3 08:46:40 zumbi kernel: [   32.124506]   alloc irq_desc for 19 on node -1
Jul  3 08:46:40 zumbi kernel: [   32.124507]   alloc kstat_irqs on node -1
Jul  3 08:46:40 zumbi kernel: [   32.124511] ata_piix 0000:00:1f.2: PCI INT A 
-> GSI 19 (level, low) -> IRQ 19
Jul  3 08:46:40 zumbi kernel: [   32.125422] ata_piix 0000:00:1f.2: MAP [ P0 P2 
P1 P3 ]
Jul  3 08:46:40 zumbi kernel: [   32.126413] ata_piix 0000:00:1f.2: setting 
latency timer to 64
Jul  3 08:46:40 zumbi kernel: [   32.126446] scsi3 : ata_piix
Jul  3 08:46:40 zumbi kernel: [   32.127032] scsi4 : ata_piix
Jul  3 08:46:40 zumbi kernel: [   32.127661] ata4: SATA max UDMA/133 cmd 0x5138 
ctl 0x514c bmdma 0x5110 irq 19
Jul  3 08:46:40 zumbi kernel: [   32.128569] ata5: SATA max UDMA/133 cmd 0x5130 
ctl 0x5148 bmdma 0x5118 irq 19
Jul  3 08:46:40 zumbi kernel: [   32.889491] ata4.00: SATA link up 1.5 Gbps 
(SStatus 113 SControl 300)
Jul  3 08:46:40 zumbi kernel: [   32.890350] ata4.01: SATA link down (SStatus 0 
SControl 300)
Jul  3 08:46:40 zumbi kernel: [   32.909636] ata4.00: ATAPI: PIONEER BD-ROM  
BDC-202, 1.04, max UDMA/66
Jul  3 08:46:40 zumbi kernel: [   32.916641] ata4.00: configured for UDMA/66
Jul  3 08:46:40 zumbi kernel: [   32.930184] scsi 3:0:0:0: CD-ROM            
PIONEER  BD-ROM  BDC-202  1.04 PQ: 0 ANSI: 5
Jul  3 08:46:40 zumbi kernel: [   32.953425] sr0: scsi3-mmc drive: 32x/32x 
writer dvd-ram cd/rw xa/form2 cdda tray
Jul  3 08:46:40 zumbi kernel: [   32.954587] Uniform CD-ROM driver Revision: 
3.20
Jul  3 08:46:40 zumbi kernel: [   32.955352] sr 3:0:0:0: Attached scsi CD-ROM 
sr0
Jul  3 08:46:40 zumbi kernel: [   32.955407] sr 3:0:0:0: Attached scsi generic 
sg0 type 5
Jul  3 08:46:40 zumbi kernel: [   33.716192] ata5.00: SATA link down (SStatus 0 
SControl 300)
Jul  3 08:46:40 zumbi kernel: [   33.716981] ata5.01: SATA link up 3.0 Gbps 
(SStatus 123 SControl 300)
Jul  3 08:46:40 zumbi kernel: [   33.731703] ata5.01: ATA-8: ST3500320AS, SD15, 
max UDMA/133
Jul  3 08:46:40 zumbi kernel: [   33.732473] ata5.01: 976773168 sectors, multi 
16: LBA48 NCQ (depth 0/32)
Jul  3 08:46:40 zumbi kernel: [   33.739728] ata5.01: configured for UDMA/133
Jul  3 08:46:40 zumbi kernel: [   33.740425] scsi 4:0:1:0: Direct-Access     
ATA      ST3500320AS      SD15 PQ: 0 ANSI: 5
Jul  3 08:46:40 zumbi kernel: [   33.741731] sd 4:0:1:0: [sda] 976773168 
512-byte hardware sectors: (500 GB/465 GiB)
Jul  3 08:46:40 zumbi kernel: [   33.742909] sd 4:0:1:0: [sda] Write Protect is 
off
Jul  3 08:46:40 zumbi kernel: [   33.743605] sd 4:0:1:0: [sda] Mode Sense: 00 
3a 00 00
Jul  3 08:46:40 zumbi kernel: [   33.743618] sd 4:0:1:0: [sda] Write cache: 
enabled, read cache: enabled, doesn't support DPO or FUA
Jul  3 08:46:40 zumbi kernel: [   33.744964]  sda: sda1 sda2 < sda5 >
Jul  3 08:46:40 zumbi kernel: [   33.771758] sd 4:0:1:0: [sda] Attached SCSI 
disk
Jul  3 08:46:40 zumbi kernel: [   33.772490] sd 4:0:1:0: Attached scsi generic 
sg1 type 0
Jul  3 08:46:40 zumbi kernel: [   33.773267] ata_piix 0000:00:1f.5: PCI INT B 
-> GSI 18 (level, low) -> IRQ 18
Jul  3 08:46:40 zumbi kernel: [   33.774173] ata_piix 0000:00:1f.5: MAP [ P0 -- 
P1 -- ]
Jul  3 08:46:40 zumbi kernel: [   33.775162] ata_piix 0000:00:1f.5: setting 
latency timer to 64
Jul  3 08:46:40 zumbi kernel: [   33.775197] scsi5 : ata_piix
Jul  3 08:46:40 zumbi kernel: [   33.775784] scsi6 : ata_piix
Jul  3 08:46:40 zumbi kernel: [   33.776388] ata6: SATA max UDMA/133 cmd 0x5128 
ctl 0x5144 bmdma 0x50f0 irq 18
Jul  3 08:46:40 zumbi kernel: [   33.777295] ata7: SATA max UDMA/133 cmd 0x5120 
ctl 0x5140 bmdma 0x50f8 irq 18
Jul  3 08:46:40 zumbi kernel: [   34.093783] ata6: SATA link down (SStatus 0 
SControl 300)
Jul  3 08:46:40 zumbi kernel: [   34.549878] ata7: SATA link up 3.0 Gbps 
(SStatus 123 SControl 300)
Jul  3 08:46:40 zumbi kernel: [   34.553408] ata7.00: ATA-8: ST3500320AS, SD15, 
max UDMA/133
Jul  3 08:46:40 zumbi kernel: [   34.554177] ata7.00: 976773168 sectors, multi 
16: LBA48 NCQ (depth 0/32)
Jul  3 08:46:40 zumbi kernel: [   34.561438] ata7.00: configured for UDMA/133
Jul  3 08:46:40 zumbi kernel: [   34.562131] scsi 6:0:0:0: Direct-Access     
ATA      ST3500320AS      SD15 PQ: 0 ANSI: 5
Jul  3 08:46:40 zumbi kernel: [   34.563446] sd 6:0:0:0: [sdb] 976773168 
512-byte hardware sectors: (500 GB/465 GiB)
Jul  3 08:46:40 zumbi kernel: [   34.564625] sd 6:0:0:0: [sdb] Write Protect is 
off
Jul  3 08:46:40 zumbi kernel: [   34.565321] sd 6:0:0:0: [sdb] Mode Sense: 00 
3a 00 00
Jul  3 08:46:40 zumbi kernel: [   34.565333] sd 6:0:0:0: [sdb] Write cache: 
enabled, read cache: enabled, doesn't support DPO or FUA
Jul  3 08:46:40 zumbi kernel: [   34.566671]  sdb:
Jul  3 08:46:40 zumbi kernel: [   34.590434] sd 6:0:0:0: [sdb] Attached SCSI 
disk
Jul  3 08:46:40 zumbi kernel: [   34.591168] sd 6:0:0:0: Attached scsi generic 
sg2 type 0
Jul  3 08:46:40 zumbi kernel: [   34.592079] Intel(R) PRO/1000 Network Driver - 
version 7.3.21-k3-NAPI
Jul  3 08:46:40 zumbi kernel: [   34.592922] Copyright (c) 1999-2006 Intel 
Corporation.
Jul  3 08:46:40 zumbi kernel: [   34.593677] e1000e: Intel(R) PRO/1000 Network 
Driver - 0.3.3.4-k4
Jul  3 08:46:40 zumbi kernel: [   34.594489] e1000e: Copyright (c) 1999-2008 
Intel Corporation.
Jul  3 08:46:40 zumbi kernel: [   34.595330] e100: Intel(R) PRO/100 Network 
Driver, 3.5.24-k2-NAPI
Jul  3 08:46:40 zumbi kernel: [   34.596139] e100: Copyright(c) 1999-2006 Intel 
Corporation
Jul  3 08:46:40 zumbi kernel: [   34.596933] tg3.c:v3.98 (February 25, 2009)
Jul  3 08:46:40 zumbi kernel: [   34.597625] tg3 0000:08:00.0: PCI INT A -> GSI 
17 (level, low) -> IRQ 17
Jul  3 08:46:40 zumbi kernel: [   34.598555] tg3 0000:08:00.0: setting latency 
timer to 64
Jul  3 08:46:40 zumbi kernel: [   34.600264] tg3 0000:08:00.0: PME# disabled
Jul  3 08:46:40 zumbi kernel: [   34.607323] eth0: Tigon3 
[partno(BCM95721A211F) rev 4201] (PCI Express) MAC address 00:10:18:32:51:a2
Jul  3 08:46:40 zumbi kernel: [   34.608634] eth0: attached PHY is 5750 
(10/100/1000Base-T Ethernet) (WireSpeed[1])
Jul  3 08:46:40 zumbi kernel: [   34.609798] eth0: RXcsums[1] LinkChgREG[0] 
MIirq[0] ASF[0] TSOcap[1]
Jul  3 08:46:40 zumbi kernel: [   34.610630] eth0: dma_rwctrl[76180000] 
dma_mask[64-bit]
Jul  3 08:46:40 zumbi kernel: [   34.611413] sky2 driver version 1.22
Jul  3 08:46:40 zumbi kernel: [   34.612126] console [netcon0] enabled
Jul  3 08:46:40 zumbi kernel: [   34.612721] netconsole: network logging started
Jul  3 08:46:40 zumbi kernel: [   34.613475] ehci_hcd: USB 2.0 'Enhanced' Host 
Controller (EHCI) Driver
Jul  3 08:46:40 zumbi kernel: [   34.614327] ehci_hcd: block sizes: qh 160 qtd 
96 itd 192 sitd 96
Jul  3 08:46:40 zumbi kernel: [   34.614340] ehci_hcd 0000:00:1a.7: PCI INT C 
-> GSI 18 (level, low) -> IRQ 18
Jul  3 08:46:40 zumbi kernel: [   34.615250] ehci_hcd 0000:00:1a.7: setting 
latency timer to 64
Jul  3 08:46:40 zumbi kernel: [   34.615253] ehci_hcd 0000:00:1a.7: EHCI Host 
Controller
Jul  3 08:46:40 zumbi kernel: [   34.616018] 
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
 creating file 'devices'
Jul  3 08:46:40 zumbi kernel: [   34.616021] 
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
 creating file '001'
Jul  3 08:46:40 zumbi kernel: [   34.616054] ehci_hcd 0000:00:1a.7: new USB bus 
registered, assigned bus number 1
Jul  3 08:46:40 zumbi kernel: [   34.617207] ehci_hcd 0000:00:1a.7: reset 
hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
Jul  3 08:46:40 zumbi kernel: [   34.617210] ehci_hcd 0000:00:1a.7: reset 
hcc_params 16871 thresh 7 uframes 1024 64 bit addr
Jul  3 08:46:40 zumbi kernel: [   34.617222] ehci_hcd 0000:00:1a.7: reset 
command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
Jul  3 08:46:40 zumbi kernel: [   34.621116] ehci_hcd 0000:00:1a.7: debug port 1
Jul  3 08:46:40 zumbi kernel: [   34.621792] ehci_hcd 0000:00:1a.7: cache line 
size of 32 is not supported
Jul  3 08:46:40 zumbi kernel: [   34.621793] ehci_hcd 0000:00:1a.7: supports 
USB remote wakeup
Jul  3 08:46:40 zumbi kernel: [   34.621796] ehci_hcd 0000:00:1a.7: irq 18, io 
mem 0xb7201400
Jul  3 08:46:40 zumbi kernel: [   34.622570] ehci_hcd 0000:00:1a.7: reset 
command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
Jul  3 08:46:40 zumbi kernel: [   34.626451] ehci_hcd 0000:00:1a.7: init 
command 010001 (park)=0 ithresh=1 period=1024 RUN
Jul  3 08:46:40 zumbi kernel: [   34.631798] ehci_hcd 0000:00:1a.7: USB 2.0 
started, EHCI 1.00
Jul  3 08:46:40 zumbi kernel: [   34.632595] usb usb1: default language 0x0409
Jul  3 08:46:40 zumbi kernel: [   34.632599] usb usb1: New USB device found, 
idVendor=1d6b, idProduct=0002
Jul  3 08:46:40 zumbi kernel: [   34.633472] usb usb1: New USB device strings: 
Mfr=3, Product=2, SerialNumber=1
Jul  3 08:46:40 zumbi kernel: [   34.634601] usb usb1: Product: EHCI Host 
Controller
Jul  3 08:46:40 zumbi kernel: [   34.635304] usb usb1: Manufacturer: Linux 
2.6.30-rc6-tip ehci_hcd
Jul  3 08:46:40 zumbi kernel: [   34.636113] usb usb1: SerialNumber: 
0000:00:1a.7
Jul  3 08:46:40 zumbi kernel: [   34.636813] usb usb1: uevent
Jul  3 08:46:40 zumbi kernel: [   34.636838] usb usb1: usb_probe_device
Jul  3 08:46:40 zumbi kernel: [   34.636839] usb usb1: configuration #1 chosen 
from 1 choice
Jul  3 08:46:40 zumbi kernel: [   34.637606] usb usb1: adding 1-0:1.0 (config 
#1, interface 0)
Jul  3 08:46:40 zumbi kernel: [   34.637615] usb 1-0:1.0: uevent
Jul  3 08:46:40 zumbi kernel: [   34.637638] hub 1-0:1.0: usb_probe_interface
Jul  3 08:46:40 zumbi kernel: [   34.637639] hub 1-0:1.0: usb_probe_interface - 
got id
Jul  3 08:46:40 zumbi kernel: [   34.637641] hub 1-0:1.0: USB hub found
Jul  3 08:46:40 zumbi kernel: [   34.638246] hub 1-0:1.0: 6 ports detected
Jul  3 08:46:40 zumbi kernel: [   34.638868] hub 1-0:1.0: standalone hub
Jul  3 08:46:40 zumbi kernel: [   34.638869] hub 1-0:1.0: no power switching 
(usb 1.0)
Jul  3 08:46:40 zumbi kernel: [   34.638871] hub 1-0:1.0: individual port 
over-current protection
Jul  3 08:46:40 zumbi kernel: [   34.638872] hub 1-0:1.0: power on to power 
good time: 20ms
Jul  3 08:46:40 zumbi kernel: [   34.638875] hub 1-0:1.0: local power source is 
good
Jul  3 08:46:40 zumbi kernel: [   34.638876] hub 1-0:1.0: trying to enable port 
power on non-switchable hub
Jul  3 08:46:40 zumbi kernel: [   34.638948] 
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
 creating file '001'
Jul  3 08:46:40 zumbi kernel: [   34.638992]   alloc irq_desc for 23 on node -1
Jul  3 08:46:40 zumbi kernel: [   34.638993]   alloc kstat_irqs on node -1
Jul  3 08:46:40 zumbi kernel: [   34.638997] ehci_hcd 0000:00:1d.7: PCI INT A 
-> GSI 23 (level, low) -> IRQ 23
Jul  3 08:46:40 zumbi kernel: [   34.639909] ehci_hcd 0000:00:1d.7: setting 
latency timer to 64
Jul  3 08:46:40 zumbi kernel: [   34.639911] ehci_hcd 0000:00:1d.7: EHCI Host 
Controller
Jul  3 08:46:40 zumbi kernel: [   34.640671] 
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
 creating file '002'
Jul  3 08:46:40 zumbi kernel: [   34.640704] ehci_hcd 0000:00:1d.7: new USB bus 
registered, assigned bus number 2
Jul  3 08:46:40 zumbi kernel: [   34.641856] ehci_hcd 0000:00:1d.7: reset 
hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
Jul  3 08:46:40 zumbi kernel: [   34.641859] ehci_hcd 0000:00:1d.7: reset 
hcc_params 16871 thresh 7 uframes 1024 64 bit addr
Jul  3 08:46:40 zumbi kernel: [   34.641870] ehci_hcd 0000:00:1d.7: reset 
command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
Jul  3 08:46:40 zumbi kernel: [   34.645770] ehci_hcd 0000:00:1d.7: debug port 1
Jul  3 08:46:40 zumbi kernel: [   34.646445] ehci_hcd 0000:00:1d.7: cache line 
size of 32 is not supported
Jul  3 08:46:40 zumbi kernel: [   34.646446] ehci_hcd 0000:00:1d.7: supports 
USB remote wakeup
Jul  3 08:46:40 zumbi kernel: [   34.646455] ehci_hcd 0000:00:1d.7: irq 23, io 
mem 0xb7201000
Jul  3 08:46:40 zumbi kernel: [   34.647229] ehci_hcd 0000:00:1d.7: reset 
command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
Jul  3 08:46:40 zumbi kernel: [   34.651104] ehci_hcd 0000:00:1d.7: init 
command 010001 (park)=0 ithresh=1 period=1024 RUN
Jul  3 08:46:40 zumbi kernel: [   34.656784] ehci_hcd 0000:00:1d.7: USB 2.0 
started, EHCI 1.00
Jul  3 08:46:40 zumbi kernel: [   34.657591] usb usb2: default language 0x0409
Jul  3 08:46:40 zumbi kernel: [   34.657595] usb usb2: New USB device found, 
idVendor=1d6b, idProduct=0002
Jul  3 08:46:40 zumbi kernel: [   34.658467] usb usb2: New USB device strings: 
Mfr=3, Product=2, SerialNumber=1
Jul  3 08:46:40 zumbi kernel: [   34.659597] usb usb2: Product: EHCI Host 
Controller
Jul  3 08:46:40 zumbi kernel: [   34.660298] usb usb2: Manufacturer: Linux 
2.6.30-rc6-tip ehci_hcd
Jul  3 08:46:40 zumbi kernel: [   34.661107] usb usb2: SerialNumber: 
0000:00:1d.7
Jul  3 08:46:40 zumbi kernel: [   34.661806] usb usb2: uevent
Jul  3 08:46:40 zumbi kernel: [   34.661830] usb usb2: usb_probe_device
Jul  3 08:46:40 zumbi kernel: [   34.661832] usb usb2: configuration #1 chosen 
from 1 choice
Jul  3 08:46:40 zumbi kernel: [   34.662600] usb usb2: adding 2-0:1.0 (config 
#1, interface 0)
Jul  3 08:46:40 zumbi kernel: [   34.662610] usb 2-0:1.0: uevent
Jul  3 08:46:40 zumbi kernel: [   34.662633] hub 2-0:1.0: usb_probe_interface
Jul  3 08:46:40 zumbi kernel: [   34.662634] hub 2-0:1.0: usb_probe_interface - 
got id
Jul  3 08:46:40 zumbi kernel: [   34.662636] hub 2-0:1.0: USB hub found
Jul  3 08:46:40 zumbi kernel: [   34.663240] hub 2-0:1.0: 6 ports detected
Jul  3 08:46:40 zumbi kernel: [   34.663865] hub 2-0:1.0: standalone hub
Jul  3 08:46:40 zumbi kernel: [   34.663866] hub 2-0:1.0: no power switching 
(usb 1.0)
Jul  3 08:46:40 zumbi kernel: [   34.663867] hub 2-0:1.0: individual port 
over-current protection
Jul  3 08:46:40 zumbi kernel: [   34.663868] hub 2-0:1.0: power on to power 
good time: 20ms
Jul  3 08:46:40 zumbi kernel: [   34.663871] hub 2-0:1.0: local power source is 
good
Jul  3 08:46:40 zumbi kernel: [   34.663872] hub 2-0:1.0: trying to enable port 
power on non-switchable hub
Jul  3 08:46:40 zumbi kernel: [   34.663919] 
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
 creating file '001'
Jul  3 08:46:40 zumbi kernel: [   34.663978] ohci_hcd: USB 1.1 'Open' Host 
Controller (OHCI) Driver
Jul  3 08:46:40 zumbi kernel: [   34.664798] ohci_hcd: block sizes: ed 80 td 96
Jul  3 08:46:40 zumbi kernel: [   34.664827] uhci_hcd: USB Universal Host 
Controller Interface driver
Jul  3 08:46:40 zumbi kernel: [   34.665674] uhci_hcd 0000:00:1a.0: PCI INT A 
-> GSI 16 (level, low) -> IRQ 16
Jul  3 08:46:40 zumbi kernel: [   34.666581] uhci_hcd 0000:00:1a.0: setting 
latency timer to 64
Jul  3 08:46:40 zumbi kernel: [   34.666583] uhci_hcd 0000:00:1a.0: UHCI Host 
Controller
Jul  3 08:46:40 zumbi kernel: [   34.672668] 
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
 creating file '003'
Jul  3 08:46:40 zumbi kernel: [   34.672701] uhci_hcd 0000:00:1a.0: new USB bus 
registered, assigned bus number 3
Jul  3 08:46:40 zumbi kernel: [   34.673853] uhci_hcd 0000:00:1a.0: detected 2 
ports
Jul  3 08:46:40 zumbi kernel: [   34.674556] uhci_hcd 0000:00:1a.0: 
uhci_check_and_reset_hc: cmd = 0x0000
Jul  3 08:46:40 zumbi kernel: [   34.674558] uhci_hcd 0000:00:1a.0: Performing 
full reset
Jul  3 08:46:40 zumbi kernel: [   34.674570] uhci_hcd 0000:00:1a.0: supports 
USB remote wakeup
Jul  3 08:46:40 zumbi kernel: [   34.674573] uhci_hcd 0000:00:1a.0: irq 16, io 
base 0x000050c0
Jul  3 08:46:40 zumbi kernel: [   34.675371] usb usb3: default language 0x0409
Jul  3 08:46:40 zumbi kernel: [   34.675375] usb usb3: New USB device found, 
idVendor=1d6b, idProduct=0001
Jul  3 08:46:40 zumbi kernel: [   34.676248] usb usb3: New USB device strings: 
Mfr=3, Product=2, SerialNumber=1
Jul  3 08:46:40 zumbi kernel: [   34.677378] usb usb3: Product: UHCI Host 
Controller
Jul  3 08:46:40 zumbi kernel: [   34.678080] usb usb3: Manufacturer: Linux 
2.6.30-rc6-tip uhci_hcd
Jul  3 08:46:40 zumbi kernel: [   34.678889] usb usb3: SerialNumber: 
0000:00:1a.0
Jul  3 08:46:40 zumbi kernel: [   34.679587] usb usb3: uevent
Jul  3 08:46:40 zumbi kernel: [   34.679610] usb usb3: usb_probe_device
Jul  3 08:46:40 zumbi kernel: [   34.679612] usb usb3: configuration #1 chosen 
from 1 choice
Jul  3 08:46:40 zumbi kernel: [   34.680381] usb usb3: adding 3-0:1.0 (config 
#1, interface 0)
Jul  3 08:46:40 zumbi kernel: [   34.680390] usb 3-0:1.0: uevent
Jul  3 08:46:40 zumbi kernel: [   34.680412] hub 3-0:1.0: usb_probe_interface
Jul  3 08:46:40 zumbi kernel: [   34.680414] hub 3-0:1.0: usb_probe_interface - 
got id
Jul  3 08:46:40 zumbi kernel: [   34.680415] hub 3-0:1.0: USB hub found
Jul  3 08:46:40 zumbi kernel: [   34.681017] hub 3-0:1.0: 2 ports detected
Jul  3 08:46:40 zumbi kernel: [   34.681642] hub 3-0:1.0: standalone hub
Jul  3 08:46:40 zumbi kernel: [   34.681643] hub 3-0:1.0: no power switching 
(usb 1.0)
Jul  3 08:46:40 zumbi kernel: [   34.681644] hub 3-0:1.0: individual port 
over-current protection
Jul  3 08:46:40 zumbi kernel: [   34.681645] hub 3-0:1.0: power on to power 
good time: 2ms
Jul  3 08:46:40 zumbi kernel: [   34.681648] hub 3-0:1.0: local power source is 
good
Jul  3 08:46:40 zumbi kernel: [   34.681649] hub 3-0:1.0: trying to enable port 
power on non-switchable hub
Jul  3 08:46:40 zumbi kernel: [   34.681685] 
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
 creating file '001'
Jul  3 08:46:40 zumbi kernel: [   34.681735]   alloc irq_desc for 21 on node -1
Jul  3 08:46:40 zumbi kernel: [   34.681736]   alloc kstat_irqs on node -1
Jul  3 08:46:40 zumbi kernel: [   34.681739] uhci_hcd 0000:00:1a.1: PCI INT B 
-> GSI 21 (level, low) -> IRQ 21
Jul  3 08:46:40 zumbi kernel: [   34.682647] uhci_hcd 0000:00:1a.1: setting 
latency timer to 64
Jul  3 08:46:40 zumbi kernel: [   34.682649] uhci_hcd 0000:00:1a.1: UHCI Host 
Controller
Jul  3 08:46:40 zumbi kernel: [   34.683410] 
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
 creating file '004'
Jul  3 08:46:40 zumbi kernel: [   34.683443] uhci_hcd 0000:00:1a.1: new USB bus 
registered, assigned bus number 4
Jul  3 08:46:40 zumbi kernel: [   34.684595] uhci_hcd 0000:00:1a.1: detected 2 
ports
Jul  3 08:46:40 zumbi kernel: [   34.685298] uhci_hcd 0000:00:1a.1: 
uhci_check_and_reset_hc: cmd = 0x0000
Jul  3 08:46:40 zumbi kernel: [   34.685299] uhci_hcd 0000:00:1a.1: Performing 
full reset
Jul  3 08:46:40 zumbi kernel: [   34.685312] uhci_hcd 0000:00:1a.1: supports 
USB remote wakeup
Jul  3 08:46:40 zumbi kernel: [   34.685320] uhci_hcd 0000:00:1a.1: irq 21, io 
base 0x000050a0
Jul  3 08:46:40 zumbi kernel: [   34.686117] usb usb4: default language 0x0409
Jul  3 08:46:40 zumbi kernel: [   34.686121] usb usb4: New USB device found, 
idVendor=1d6b, idProduct=0001
Jul  3 08:46:40 zumbi kernel: [   34.686993] usb usb4: New USB device strings: 
Mfr=3, Product=2, SerialNumber=1
Jul  3 08:46:40 zumbi kernel: [   34.688119] usb usb4: Product: UHCI Host 
Controller
Jul  3 08:46:40 zumbi kernel: [   34.688822] usb usb4: Manufacturer: Linux 
2.6.30-rc6-tip uhci_hcd
Jul  3 08:46:40 zumbi kernel: [   34.689632] usb usb4: SerialNumber: 
0000:00:1a.1
Jul  3 08:46:40 zumbi kernel: [   34.690331] usb usb4: uevent
Jul  3 08:46:40 zumbi kernel: [   34.690354] usb usb4: usb_probe_device
Jul  3 08:46:40 zumbi kernel: [   34.690355] usb usb4: configuration #1 chosen 
from 1 choice
Jul  3 08:46:40 zumbi kernel: [   34.691120] usb usb4: adding 4-0:1.0 (config 
#1, interface 0)
Jul  3 08:46:40 zumbi kernel: [   34.691129] usb 4-0:1.0: uevent
Jul  3 08:46:40 zumbi kernel: [   34.691152] hub 4-0:1.0: usb_probe_interface
Jul  3 08:46:40 zumbi kernel: [   34.691153] hub 4-0:1.0: usb_probe_interface - 
got id
Jul  3 08:46:40 zumbi kernel: [   34.691154] hub 4-0:1.0: USB hub found
Jul  3 08:46:40 zumbi kernel: [   34.691756] hub 4-0:1.0: 2 ports detected
Jul  3 08:46:40 zumbi kernel: [   34.692382] hub 4-0:1.0: standalone hub
Jul  3 08:46:40 zumbi kernel: [   34.692383] hub 4-0:1.0: no power switching 
(usb 1.0)
Jul  3 08:46:40 zumbi kernel: [   34.692384] hub 4-0:1.0: individual port 
over-current protection
Jul  3 08:46:40 zumbi kernel: [   34.692386] hub 4-0:1.0: power on to power 
good time: 2ms
Jul  3 08:46:40 zumbi kernel: [   34.692388] hub 4-0:1.0: local power source is 
good
Jul  3 08:46:40 zumbi kernel: [   34.692389] hub 4-0:1.0: trying to enable port 
power on non-switchable hub
Jul  3 08:46:40 zumbi kernel: [   34.692427] 
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
 creating file '001'
Jul  3 08:46:40 zumbi kernel: [   34.692475] uhci_hcd 0000:00:1a.2: PCI INT D 
-> GSI 19 (level, low) -> IRQ 19
Jul  3 08:46:40 zumbi kernel: [   34.693382] uhci_hcd 0000:00:1a.2: setting 
latency timer to 64
Jul  3 08:46:40 zumbi kernel: [   34.693384] uhci_hcd 0000:00:1a.2: UHCI Host 
Controller
Jul  3 08:46:40 zumbi kernel: [   34.694143] 
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
 creating file '005'
Jul  3 08:46:40 zumbi kernel: [   34.694177] uhci_hcd 0000:00:1a.2: new USB bus 
registered, assigned bus number 5
Jul  3 08:46:40 zumbi kernel: [   34.695329] uhci_hcd 0000:00:1a.2: detected 2 
ports
Jul  3 08:46:40 zumbi kernel: [   34.696031] uhci_hcd 0000:00:1a.2: 
uhci_check_and_reset_hc: cmd = 0x0000
Jul  3 08:46:40 zumbi kernel: [   34.696032] uhci_hcd 0000:00:1a.2: Performing 
full reset
Jul  3 08:46:40 zumbi kernel: [   34.696044] uhci_hcd 0000:00:1a.2: supports 
USB remote wakeup
Jul  3 08:46:40 zumbi kernel: [   34.696048] uhci_hcd 0000:00:1a.2: irq 19, io 
base 0x00005080
Jul  3 08:46:40 zumbi kernel: [   34.696847] usb usb5: default language 0x0409
Jul  3 08:46:40 zumbi kernel: [   34.696851] usb usb5: New USB device found, 
idVendor=1d6b, idProduct=0001
Jul  3 08:46:40 zumbi kernel: [   34.697724] usb usb5: New USB device strings: 
Mfr=3, Product=2, SerialNumber=1
Jul  3 08:46:40 zumbi kernel: [   34.698852] usb usb5: Product: UHCI Host 
Controller
Jul  3 08:46:40 zumbi kernel: [   34.699553] usb usb5: Manufacturer: Linux 
2.6.30-rc6-tip uhci_hcd
Jul  3 08:46:40 zumbi kernel: [   34.700363] usb usb5: SerialNumber: 
0000:00:1a.2
Jul  3 08:46:40 zumbi kernel: [   34.701059] usb usb5: uevent
Jul  3 08:46:40 zumbi kernel: [   34.701082] usb usb5: usb_probe_device
Jul  3 08:46:40 zumbi kernel: [   34.701084] usb usb5: configuration #1 chosen 
from 1 choice
Jul  3 08:46:40 zumbi kernel: [   34.701851] usb usb5: adding 5-0:1.0 (config 
#1, interface 0)
Jul  3 08:46:40 zumbi kernel: [   34.701861] usb 5-0:1.0: uevent
Jul  3 08:46:40 zumbi kernel: [   34.701888] hub 5-0:1.0: usb_probe_interface
Jul  3 08:46:40 zumbi kernel: [   34.701889] hub 5-0:1.0: usb_probe_interface - 
got id
Jul  3 08:46:40 zumbi kernel: [   34.701891] hub 5-0:1.0: USB hub found
Jul  3 08:46:40 zumbi kernel: [   34.702495] hub 5-0:1.0: 2 ports detected
Jul  3 08:46:40 zumbi kernel: [   34.703118] hub 5-0:1.0: standalone hub
Jul  3 08:46:40 zumbi kernel: [   34.703119] hub 5-0:1.0: no power switching 
(usb 1.0)
Jul  3 08:46:40 zumbi kernel: [   34.703120] hub 5-0:1.0: individual port 
over-current protection
Jul  3 08:46:40 zumbi kernel: [   34.703121] hub 5-0:1.0: power on to power 
good time: 2ms
Jul  3 08:46:40 zumbi kernel: [   34.703123] hub 5-0:1.0: local power source is 
good
Jul  3 08:46:40 zumbi kernel: [   34.703124] hub 5-0:1.0: trying to enable port 
power on non-switchable hub
Jul  3 08:46:40 zumbi kernel: [   34.703165] 
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
 creating file '001'
Jul  3 08:46:40 zumbi kernel: [   34.703214] uhci_hcd 0000:00:1d.0: PCI INT A 
-> GSI 23 (level, low) -> IRQ 23
Jul  3 08:46:40 zumbi kernel: [   34.704119] uhci_hcd 0000:00:1d.0: setting 
latency timer to 64
Jul  3 08:46:40 zumbi kernel: [   34.704122] uhci_hcd 0000:00:1d.0: UHCI Host 
Controller
Jul  3 08:46:40 zumbi kernel: [   34.704886] 
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
 creating file '006'
Jul  3 08:46:40 zumbi kernel: [   34.704920] uhci_hcd 0000:00:1d.0: new USB bus 
registered, assigned bus number 6
Jul  3 08:46:40 zumbi kernel: [   34.706073] uhci_hcd 0000:00:1d.0: detected 2 
ports
Jul  3 08:46:40 zumbi kernel: [   34.706777] uhci_hcd 0000:00:1d.0: 
uhci_check_and_reset_hc: cmd = 0x0000
Jul  3 08:46:40 zumbi kernel: [   34.706778] uhci_hcd 0000:00:1d.0: Performing 
full reset
Jul  3 08:46:40 zumbi kernel: [   34.706790] uhci_hcd 0000:00:1d.0: supports 
USB remote wakeup
Jul  3 08:46:40 zumbi kernel: [   34.706794] uhci_hcd 0000:00:1d.0: irq 23, io 
base 0x00005060
Jul  3 08:46:40 zumbi kernel: [   34.707591] usb usb6: default language 0x0409
Jul  3 08:46:40 zumbi kernel: [   34.707595] usb usb6: New USB device found, 
idVendor=1d6b, idProduct=0001
Jul  3 08:46:40 zumbi kernel: [   34.708466] usb usb6: New USB device strings: 
Mfr=3, Product=2, SerialNumber=1
Jul  3 08:46:40 zumbi kernel: [   34.709597] usb usb6: Product: UHCI Host 
Controller
Jul  3 08:46:40 zumbi kernel: [   34.710300] usb usb6: Manufacturer: Linux 
2.6.30-rc6-tip uhci_hcd
Jul  3 08:46:40 zumbi kernel: [   34.711109] usb usb6: SerialNumber: 
0000:00:1d.0
Jul  3 08:46:40 zumbi kernel: [   34.711808] usb usb6: uevent
Jul  3 08:46:40 zumbi kernel: [   34.711833] usb usb6: usb_probe_device
Jul  3 08:46:40 zumbi kernel: [   34.711835] usb usb6: configuration #1 chosen 
from 1 choice
Jul  3 08:46:40 zumbi kernel: [   34.712606] usb usb6: adding 6-0:1.0 (config 
#1, interface 0)
Jul  3 08:46:40 zumbi kernel: [   34.712615] usb 6-0:1.0: uevent
Jul  3 08:46:40 zumbi kernel: [   34.712638] hub 6-0:1.0: usb_probe_interface
Jul  3 08:46:40 zumbi kernel: [   34.712639] hub 6-0:1.0: usb_probe_interface - 
got id
Jul  3 08:46:40 zumbi kernel: [   34.712640] hub 6-0:1.0: USB hub found
Jul  3 08:46:40 zumbi kernel: [   34.713245] hub 6-0:1.0: 2 ports detected
Jul  3 08:46:40 zumbi kernel: [   34.713867] hub 6-0:1.0: standalone hub
Jul  3 08:46:40 zumbi kernel: [   34.713868] hub 6-0:1.0: no power switching 
(usb 1.0)
Jul  3 08:46:40 zumbi kernel: [   34.713869] hub 6-0:1.0: individual port 
over-current protection
Jul  3 08:46:40 zumbi kernel: [   34.713871] hub 6-0:1.0: power on to power 
good time: 2ms
Jul  3 08:46:40 zumbi kernel: [   34.713873] hub 6-0:1.0: local power source is 
good
Jul  3 08:46:40 zumbi kernel: [   34.713874] hub 6-0:1.0: trying to enable port 
power on non-switchable hub
Jul  3 08:46:40 zumbi kernel: [   34.713912] 
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
 creating file '001'
Jul  3 08:46:40 zumbi kernel: [   34.713963] uhci_hcd 0000:00:1d.1: PCI INT B 
-> GSI 19 (level, low) -> IRQ 19
Jul  3 08:46:40 zumbi kernel: [   34.714872] uhci_hcd 0000:00:1d.1: setting 
latency timer to 64
Jul  3 08:46:40 zumbi kernel: [   34.714874] uhci_hcd 0000:00:1d.1: UHCI Host 
Controller
Jul  3 08:46:40 zumbi kernel: [   34.715640] 
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
 creating file '007'
Jul  3 08:46:40 zumbi kernel: [   34.715681] uhci_hcd 0000:00:1d.1: new USB bus 
registered, assigned bus number 7
Jul  3 08:46:40 zumbi kernel: [   34.716840] uhci_hcd 0000:00:1d.1: detected 2 
ports
Jul  3 08:46:40 zumbi kernel: [   34.717543] uhci_hcd 0000:00:1d.1: 
uhci_check_and_reset_hc: cmd = 0x0000
Jul  3 08:46:40 zumbi kernel: [   34.717544] uhci_hcd 0000:00:1d.1: Performing 
full reset
Jul  3 08:46:40 zumbi kernel: [   34.717557] uhci_hcd 0000:00:1d.1: supports 
USB remote wakeup
Jul  3 08:46:40 zumbi kernel: [   34.717560] uhci_hcd 0000:00:1d.1: irq 19, io 
base 0x00005040
Jul  3 08:46:40 zumbi kernel: [   34.718359] usb usb7: default language 0x0409
Jul  3 08:46:40 zumbi kernel: [   34.718363] usb usb7: New USB device found, 
idVendor=1d6b, idProduct=0001
Jul  3 08:46:40 zumbi kernel: [   34.719235] usb usb7: New USB device strings: 
Mfr=3, Product=2, SerialNumber=1
Jul  3 08:46:40 zumbi kernel: [   34.720363] usb usb7: Product: UHCI Host 
Controller
Jul  3 08:46:40 zumbi kernel: [   34.721064] usb usb7: Manufacturer: Linux 
2.6.30-rc6-tip uhci_hcd
Jul  3 08:46:40 zumbi kernel: [   34.721874] usb usb7: SerialNumber: 
0000:00:1d.1
Jul  3 08:46:40 zumbi kernel: [   34.722577] usb usb7: uevent
Jul  3 08:46:40 zumbi kernel: [   34.722601] usb usb7: usb_probe_device
Jul  3 08:46:40 zumbi kernel: [   34.722603] usb usb7: configuration #1 chosen 
from 1 choice
Jul  3 08:46:40 zumbi kernel: [   34.723374] usb usb7: adding 7-0:1.0 (config 
#1, interface 0)
Jul  3 08:46:40 zumbi kernel: [   34.723383] usb 7-0:1.0: uevent
Jul  3 08:46:40 zumbi kernel: [   34.723407] hub 7-0:1.0: usb_probe_interface
Jul  3 08:46:40 zumbi kernel: [   34.723408] hub 7-0:1.0: usb_probe_interface - 
got id
Jul  3 08:46:40 zumbi kernel: [   34.723410] hub 7-0:1.0: USB hub found
Jul  3 08:46:40 zumbi kernel: [   34.724011] hub 7-0:1.0: 2 ports detected
Jul  3 08:46:40 zumbi kernel: [   34.724636] hub 7-0:1.0: standalone hub
Jul  3 08:46:40 zumbi kernel: [   34.724637] hub 7-0:1.0: no power switching 
(usb 1.0)
Jul  3 08:46:40 zumbi kernel: [   34.724638] hub 7-0:1.0: individual port 
over-current protection
Jul  3 08:46:40 zumbi kernel: [   34.724639] hub 7-0:1.0: power on to power 
good time: 2ms
Jul  3 08:46:40 zumbi kernel: [   34.724641] hub 7-0:1.0: local power source is 
good
Jul  3 08:46:40 zumbi kernel: [   34.724643] hub 7-0:1.0: trying to enable port 
power on non-switchable hub
Jul  3 08:46:40 zumbi kernel: [   34.724682] 
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
 creating file '001'
Jul  3 08:46:40 zumbi kernel: [   34.724731] uhci_hcd 0000:00:1d.2: PCI INT C 
-> GSI 18 (level, low) -> IRQ 18
Jul  3 08:46:40 zumbi kernel: [   34.725638] uhci_hcd 0000:00:1d.2: setting 
latency timer to 64
Jul  3 08:46:40 zumbi kernel: [   34.725640] uhci_hcd 0000:00:1d.2: UHCI Host 
Controller
Jul  3 08:46:40 zumbi kernel: [   34.726402] 
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
 creating file '008'
Jul  3 08:46:40 zumbi kernel: [   34.726439] uhci_hcd 0000:00:1d.2: new USB bus 
registered, assigned bus number 8
Jul  3 08:46:40 zumbi kernel: [   34.727600] uhci_hcd 0000:00:1d.2: detected 2 
ports
Jul  3 08:46:40 zumbi kernel: [   34.728304] uhci_hcd 0000:00:1d.2: 
uhci_check_and_reset_hc: cmd = 0x0000
Jul  3 08:46:40 zumbi kernel: [   34.728306] uhci_hcd 0000:00:1d.2: Performing 
full reset
Jul  3 08:46:40 zumbi kernel: [   34.728318] uhci_hcd 0000:00:1d.2: supports 
USB remote wakeup
Jul  3 08:46:40 zumbi kernel: [   34.728321] uhci_hcd 0000:00:1d.2: irq 18, io 
base 0x00005020
Jul  3 08:46:40 zumbi kernel: [   34.729117] usb usb8: default language 0x0409
Jul  3 08:46:40 zumbi kernel: [   34.729122] usb usb8: New USB device found, 
idVendor=1d6b, idProduct=0001
Jul  3 08:46:40 zumbi kernel: [   34.729993] usb usb8: New USB device strings: 
Mfr=3, Product=2, SerialNumber=1
Jul  3 08:46:40 zumbi kernel: [   34.731120] usb usb8: Product: UHCI Host 
Controller
Jul  3 08:46:40 zumbi kernel: [   34.731821] usb usb8: Manufacturer: Linux 
2.6.30-rc6-tip uhci_hcd
Jul  3 08:46:40 zumbi kernel: [   34.732631] usb usb8: SerialNumber: 
0000:00:1d.2
Jul  3 08:46:40 zumbi kernel: [   34.733330] usb usb8: uevent
Jul  3 08:46:40 zumbi kernel: [   34.733354] usb usb8: usb_probe_device
Jul  3 08:46:40 zumbi kernel: [   34.733355] usb usb8: configuration #1 chosen 
from 1 choice
Jul  3 08:46:40 zumbi kernel: [   34.734127] usb usb8: adding 8-0:1.0 (config 
#1, interface 0)
Jul  3 08:46:40 zumbi kernel: [   34.734136] usb 8-0:1.0: uevent
Jul  3 08:46:40 zumbi kernel: [   34.734159] hub 8-0:1.0: usb_probe_interface
Jul  3 08:46:40 zumbi kernel: [   34.734160] hub 8-0:1.0: usb_probe_interface - 
got id
Jul  3 08:46:40 zumbi kernel: [   34.734161] hub 8-0:1.0: USB hub found
Jul  3 08:46:40 zumbi kernel: [   34.734764] hub 8-0:1.0: 2 ports detected
Jul  3 08:46:40 zumbi kernel: [   34.735390] hub 8-0:1.0: standalone hub
Jul  3 08:46:40 zumbi kernel: [   34.735391] hub 8-0:1.0: no power switching 
(usb 1.0)
Jul  3 08:46:40 zumbi kernel: [   34.735392] hub 8-0:1.0: individual port 
over-current protection
Jul  3 08:46:40 zumbi kernel: [   34.735393] hub 8-0:1.0: power on to power 
good time: 2ms
Jul  3 08:46:40 zumbi kernel: [   34.735395] hub 8-0:1.0: local power source is 
good
Jul  3 08:46:40 zumbi kernel: [   34.735397] hub 8-0:1.0: trying to enable port 
power on non-switchable hub
Jul  3 08:46:40 zumbi kernel: [   34.735436] 
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
 creating file '001'
Jul  3 08:46:40 zumbi kernel: [   34.735530] usbcore: registered new interface 
driver usblp
Jul  3 08:46:40 zumbi kernel: [   34.736289] Initializing USB Mass Storage 
driver...
Jul  3 08:46:40 zumbi kernel: [   34.737032] usbcore: registered new interface 
driver usb-storage
Jul  3 08:46:40 zumbi kernel: [   34.737847] USB Mass Storage support 
registered.
Jul  3 08:46:40 zumbi kernel: [   34.738566] usbcore: registered new interface 
driver libusual
Jul  3 08:46:40 zumbi kernel: [   34.739371] hub 1-0:1.0: state 7 ports 6 chg 
0000 evt 0000
Jul  3 08:46:40 zumbi kernel: [   34.739449] PNP: No PS/2 controller found. 
Probing ports directly.
Jul  3 08:46:40 zumbi kernel: [   34.743070] serio: i8042 KBD port at 0x60,0x64 
irq 1
Jul  3 08:46:40 zumbi kernel: [   34.743783] serio: i8042 AUX port at 0x60,0x64 
irq 12
Jul  3 08:46:40 zumbi kernel: [   34.744582] mice: PS/2 mouse device common for 
all mice
Jul  3 08:46:40 zumbi kernel: [   34.745476] rtc_cmos 00:02: RTC can wake from 
S4
Jul  3 08:46:40 zumbi kernel: [   34.746203] rtc_cmos 00:02: rtc core: 
registered rtc_cmos as rtc0
Jul  3 08:46:40 zumbi kernel: [   34.747036] rtc0: alarms up to one month, y3k, 
114 bytes nvram, hpet irqs
Jul  3 08:46:40 zumbi kernel: [   34.747940] i801_smbus 0000:00:1f.3: PCI INT B 
-> GSI 18 (level, low) -> IRQ 18
Jul  3 08:46:40 zumbi kernel: [   34.749231] device-mapper: ioctl: 4.14.0-ioctl 
(2008-04-23) initialised: dm-devel@xxxxxxxxxx
Jul  3 08:46:40 zumbi kernel: [   34.751302] cpuidle: using governor ladder
Jul  3 08:46:40 zumbi kernel: [   34.753299] cpuidle: using governor menu
Jul  3 08:46:40 zumbi kernel: [   34.754546] usbcore: registered new interface 
driver hiddev
Jul  3 08:46:40 zumbi kernel: [   34.755353] usbcore: registered new interface 
driver usbhid
Jul  3 08:46:40 zumbi kernel: [   34.756123] usbhid: v2.6:USB HID core driver
Jul  3 08:46:40 zumbi kernel: [   34.756871] Advanced Linux Sound Architecture 
Driver Version 1.0.20.
Jul  3 08:46:40 zumbi kernel: [   34.759841] modprobe used greatest stack 
depth: 5904 bytes left
Jul  3 08:46:40 zumbi kernel: [   34.760874] ALSA device list:
Jul  3 08:46:40 zumbi kernel: [   34.761409]   No soundcards found.
Jul  3 08:46:40 zumbi kernel: [   34.762054] Netfilter messages via NETLINK 
v0.30.
Jul  3 08:46:40 zumbi kernel: [   34.762803] nf_conntrack version 0.5.0 (16384 
buckets, 65536 max)
Jul  3 08:46:40 zumbi kernel: [   34.763857] ctnetlink v0.93: registering with 
nfnetlink.
Jul  3 08:46:40 zumbi kernel: [   34.764665] ehci_hcd 0000:00:1d.7: GetStatus 
port 1 status 001403 POWER sig=k CSC CONNECT
Jul  3 08:46:40 zumbi kernel: [   34.764669] hub 2-0:1.0: port 1: status 0501 
change 0001
Jul  3 08:46:40 zumbi kernel: [   34.764676] ehci_hcd 0000:00:1d.7: GetStatus 
port 2 status 001403 POWER sig=k CSC CONNECT
Jul  3 08:46:40 zumbi kernel: [   34.764678] hub 2-0:1.0: port 2: status 0501 
change 0001
Jul  3 08:46:40 zumbi kernel: [   34.765049] ip_tables: (C) 2000-2006 Netfilter 
Core Team
Jul  3 08:46:40 zumbi kernel: [   34.765855] TCP cubic registered
Jul  3 08:46:40 zumbi kernel: [   34.766462] Initializing XFRM netlink socket
Jul  3 08:46:40 zumbi kernel: [   34.767542] NET: Registered protocol family 10
Jul  3 08:46:40 zumbi kernel: [   34.768999] ip6_tables: (C) 2000-2006 
Netfilter Core Team
Jul  3 08:46:40 zumbi kernel: [   34.769829] IPv6 over IPv4 tunneling driver
Jul  3 08:46:40 zumbi kernel: [   34.771014] NET: Registered protocol family 17
Jul  3 08:46:40 zumbi kernel: [   34.771999] RPC: Registered udp transport 
module.
Jul  3 08:46:40 zumbi kernel: [   34.772689] RPC: Registered tcp transport 
module.
Jul  3 08:46:40 zumbi kernel: [   34.775884] PM: Resume from disk failed.
Jul  3 08:46:40 zumbi kernel: [   34.775892] registered taskstats version 1
Jul  3 08:46:40 zumbi kernel: [   34.776633]   Magic number: 1:207:773
Jul  3 08:46:40 zumbi kernel: [   34.777277] hub 2-0:1.0: hash matches
Jul  3 08:46:40 zumbi kernel: [   34.777988] Freeing unused kernel memory: 504k 
freed
Jul  3 08:46:40 zumbi kernel: [   34.778857] Write protecting the kernel 
read-only data: 7936k
Jul  3 08:46:40 zumbi kernel: [   34.781131] hub 3-0:1.0: state 7 ports 2 chg 
0000 evt 0000
Jul  3 08:46:40 zumbi kernel: [   34.792160] hub 4-0:1.0: state 7 ports 2 chg 
0000 evt 0000
Jul  3 08:46:40 zumbi kernel: [   34.804137] hub 5-0:1.0: state 7 ports 2 chg 
0000 evt 0000
Jul  3 08:46:40 zumbi kernel: [   34.815706] uhci_hcd 0000:00:1d.0: port 1 
portsc 008a,00
Jul  3 08:46:40 zumbi kernel: [   34.815717] uhci_hcd 0000:00:1d.0: port 2 
portsc 008a,00
Jul  3 08:46:40 zumbi kernel: [   34.824144] hub 7-0:1.0: state 7 ports 2 chg 
0000 evt 0000
Jul  3 08:46:40 zumbi kernel: [   34.832619] console_setup used greatest stack 
depth: 5552 bytes left
Jul  3 08:46:40 zumbi kernel: [   34.835423] hub 8-0:1.0: state 7 ports 2 chg 
0000 evt 0000
Jul  3 08:46:40 zumbi kernel: [   34.859725] usb usb3: uevent
Jul  3 08:46:40 zumbi kernel: [   34.859737] usb 3-0:1.0: uevent
Jul  3 08:46:40 zumbi kernel: [   34.859799] usb usb4: uevent
Jul  3 08:46:40 zumbi kernel: [   34.859810] usb 4-0:1.0: uevent
Jul  3 08:46:40 zumbi kernel: [   34.859862] usb usb5: uevent
Jul  3 08:46:40 zumbi kernel: [   34.859873] usb 5-0:1.0: uevent
Jul  3 08:46:40 zumbi kernel: [   34.859926] usb usb1: uevent
Jul  3 08:46:40 zumbi kernel: [   34.859936] usb 1-0:1.0: uevent
Jul  3 08:46:40 zumbi kernel: [   34.860169] usb usb6: uevent
Jul  3 08:46:40 zumbi kernel: [   34.860180] usb 6-0:1.0: uevent
Jul  3 08:46:40 zumbi kernel: [   34.860234] usb usb7: uevent
Jul  3 08:46:40 zumbi kernel: [   34.860244] usb 7-0:1.0: uevent
Jul  3 08:46:40 zumbi kernel: [   34.860297] usb usb8: uevent
Jul  3 08:46:40 zumbi kernel: [   34.860308] usb 8-0:1.0: uevent
Jul  3 08:46:40 zumbi kernel: [   34.860360] usb usb2: uevent
Jul  3 08:46:40 zumbi kernel: [   34.860371] usb 2-0:1.0: uevent
Jul  3 08:46:40 zumbi kernel: [   34.864180] hub 2-0:1.0: state 7 ports 6 chg 
0006 evt 0000
Jul  3 08:46:40 zumbi kernel: [   34.864189] hub 2-0:1.0: port 1, status 0501, 
change 0000, 480 Mb/s
Jul  3 08:46:40 zumbi kernel: [   34.864195] ehci_hcd 0000:00:1d.7: port 1 low 
speed --> companion
Jul  3 08:46:40 zumbi kernel: [   34.916014] ehci_hcd 0000:00:1d.7: GetStatus 
port 1 status 003002 POWER OWNER sig=se0 CSC
Jul  3 08:46:40 zumbi kernel: [   34.916036] hub 2-0:1.0: port 2, status 0501, 
change 0000, 480 Mb/s
Jul  3 08:46:40 zumbi kernel: [   34.916043] ehci_hcd 0000:00:1d.7: port 2 low 
speed --> companion
Jul  3 08:46:40 zumbi kernel: [   34.919673] scsi_id used greatest stack depth: 
5504 bytes left
Jul  3 08:46:40 zumbi kernel: [   34.967023] ehci_hcd 0000:00:1d.7: GetStatus 
port 2 status 003002 POWER OWNER sig=se0 CSC
Jul  3 08:46:40 zumbi kernel: [   34.967042] hub 2-0:1.0: state 7 ports 6 chg 
0000 evt 0004
Jul  3 08:46:40 zumbi kernel: [   34.967047] hub 6-0:1.0: state 7 ports 2 chg 
0000 evt 0006
Jul  3 08:46:40 zumbi kernel: [   34.967053] uhci_hcd 0000:00:1d.0: port 1 
portsc 01a3,00
Jul  3 08:46:40 zumbi kernel: [   34.967058] hub 6-0:1.0: port 1, status 0301, 
change 0001, 1.5 Mb/s
Jul  3 08:46:40 zumbi kernel: [   34.968638] scsi_id used greatest stack depth: 
5040 bytes left
Jul  3 08:46:40 zumbi kernel: [   35.070055] hub 6-0:1.0: debounce: port 1: 
total 100ms stable 100ms status 0x301
Jul  3 08:46:40 zumbi kernel: [   35.089682] PM: Starting manual resume from 
disk
Jul  3 08:46:40 zumbi kernel: [   35.090386] PM: Resume from partition 8:5
Jul  3 08:46:40 zumbi kernel: [   35.090387] PM: Checking hibernation image.
Jul  3 08:46:40 zumbi kernel: [   35.090794] PM: Resume from disk failed.
Jul  3 08:46:40 zumbi kernel: [   35.152479] kjournald starting.  Commit 
interval 5 seconds
Jul  3 08:46:40 zumbi kernel: [   35.152522] EXT3-fs: mounted filesystem with 
writeback data mode.
Jul  3 08:46:40 zumbi kernel: [   35.171712] usb 6-1: new low speed USB device 
using uhci_hcd and address 2
Jul  3 08:46:40 zumbi kernel: [   35.314518] usb 6-1: skipped 1 descriptor 
after interface
Jul  3 08:46:40 zumbi kernel: [   35.319516] usb 6-1: default language 0x0409
Jul  3 08:46:40 zumbi kernel: [   35.336551] usb 6-1: New USB device found, 
idVendor=045e, idProduct=0083
Jul  3 08:46:40 zumbi kernel: [   35.337484] usb 6-1: New USB device strings: 
Mfr=1, Product=2, SerialNumber=0
Jul  3 08:46:40 zumbi kernel: [   35.338388] usb 6-1: Product: Basic Optical 
Mouse
Jul  3 08:46:40 zumbi kernel: [   35.339078] usb 6-1: Manufacturer: Microsoft
Jul  3 08:46:40 zumbi kernel: [   35.339837] usb 6-1: uevent
Jul  3 08:46:40 zumbi kernel: [   35.339846] usb 6-1: usb_probe_device
Jul  3 08:46:40 zumbi kernel: [   35.339848] usb 6-1: configuration #1 chosen 
from 1 choice
Jul  3 08:46:40 zumbi kernel: [   35.343517] usb 6-1: adding 6-1:1.0 (config 
#1, interface 0)
Jul  3 08:46:40 zumbi kernel: [   35.343539] usb 6-1:1.0: uevent
Jul  3 08:46:40 zumbi kernel: [   35.343564] usbhid 6-1:1.0: usb_probe_interface
Jul  3 08:46:40 zumbi kernel: [   35.343567] usbhid 6-1:1.0: 
usb_probe_interface - got id
Jul  3 08:46:40 zumbi kernel: [   35.356674] input: Microsoft Basic Optical 
Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input3
Jul  3 08:46:40 zumbi kernel: [   35.358169] generic-usb 0003:045E:0083.0001: 
input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on 
usb-0000:00:1d.0-1/input0
Jul  3 08:46:40 zumbi kernel: [   35.359824] 
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
 creating file '002'
Jul  3 08:46:40 zumbi kernel: [   35.359850] uhci_hcd 0000:00:1d.0: port 2 
portsc 01a3,00
Jul  3 08:46:40 zumbi kernel: [   35.359855] hub 6-0:1.0: port 2, status 0301, 
change 0001, 1.5 Mb/s
Jul  3 08:46:40 zumbi kernel: [   35.464019] hub 6-0:1.0: debounce: port 2: 
total 100ms stable 100ms status 0x301
Jul  3 08:46:40 zumbi kernel: [   35.565539] usb 6-2: new low speed USB device 
using uhci_hcd and address 3
Jul  3 08:46:40 zumbi kernel: [   35.615345] runlevel used greatest stack 
depth: 4360 bytes left
Jul  3 08:46:40 zumbi kernel: [   35.712433] usb 6-2: skipped 1 descriptor 
after interface
Jul  3 08:46:40 zumbi kernel: [   35.712437] usb 6-2: skipped 1 descriptor 
after interface
Jul  3 08:46:40 zumbi kernel: [   35.712441] usb 6-2: New USB device found, 
idVendor=0566, idProduct=3002
Jul  3 08:46:40 zumbi kernel: [   35.713333] usb 6-2: New USB device strings: 
Mfr=0, Product=0, SerialNumber=0
Jul  3 08:46:40 zumbi kernel: [   35.714310] usb 6-2: uevent
Jul  3 08:46:40 zumbi kernel: [   35.714318] usb 6-2: usb_probe_device
Jul  3 08:46:40 zumbi kernel: [   35.714319] usb 6-2: configuration #1 chosen 
from 1 choice
Jul  3 08:46:40 zumbi kernel: [   35.717492] usb 6-2: adding 6-2:1.0 (config 
#1, interface 0)
Jul  3 08:46:40 zumbi kernel: [   35.717516] usb 6-2:1.0: uevent
Jul  3 08:46:40 zumbi kernel: [   35.717540] usbhid 6-2:1.0: usb_probe_interface
Jul  3 08:46:40 zumbi kernel: [   35.717542] usbhid 6-2:1.0: 
usb_probe_interface - got id
Jul  3 08:46:40 zumbi kernel: [   35.730572] input: HID 0566:3002 as 
/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input4
Jul  3 08:46:40 zumbi kernel: [   35.737220] uhci_hcd 0000:00:1d.0: reserve dev 
3 ep81-INT, period 8, phase 4, 118 us
Jul  3 08:46:40 zumbi kernel: [   35.737249] generic-usb 0003:0566:3002.0002: 
input,hidraw1: USB HID v1.10 Keyboard [HID 0566:3002] on 
usb-0000:00:1d.0-2/input0
Jul  3 08:46:40 zumbi kernel: [   35.738804] usb 6-2: adding 6-2:1.1 (config 
#1, interface 1)
Jul  3 08:46:40 zumbi kernel: [   35.738814] usb 6-2:1.1: uevent
Jul  3 08:46:40 zumbi kernel: [   35.738825] usbhid 6-2:1.1: usb_probe_interface
Jul  3 08:46:40 zumbi kernel: [   35.738826] usbhid 6-2:1.1: 
usb_probe_interface - got id
Jul  3 08:46:40 zumbi kernel: [   35.774482] input: HID 0566:3002 as 
/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/input/input5
Jul  3 08:46:40 zumbi kernel: [   35.775801] uhci_hcd 0000:00:1d.0: reserve dev 
3 ep82-INT, period 8, phase 4, 93 us
Jul  3 08:46:40 zumbi kernel: [   35.775818] 
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/file.c:
 looking for a minor, starting at 96
Jul  3 08:46:40 zumbi kernel: [   35.775849] generic-usb 0003:0566:3002.0003: 
input,hiddev96,hidraw2: USB HID v1.10 Device [HID 0566:3002] on 
usb-0000:00:1d.0-2/input1
Jul  3 08:46:40 zumbi kernel: [   35.777490] 
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
 creating file '003'
Jul  3 08:46:40 zumbi kernel: [   35.777513] hub 6-0:1.0: state 7 ports 2 chg 
0000 evt 0000
Jul  3 08:46:40 zumbi kernel: [   35.792824] usb usb3: suspend_rh (auto-stop)
Jul  3 08:46:40 zumbi kernel: [   35.792847] usb usb4: suspend_rh (auto-stop)
Jul  3 08:46:40 zumbi kernel: [   35.792867] usb usb5: suspend_rh (auto-stop)
Jul  3 08:46:40 zumbi kernel: [   35.792887] usb usb7: suspend_rh (auto-stop)
Jul  3 08:46:40 zumbi kernel: [   35.792907] usb usb8: suspend_rh (auto-stop)
Jul  3 08:46:40 zumbi kernel: [   37.027034] hub 1-0:1.0: hub_suspend
Jul  3 08:46:40 zumbi kernel: [   37.027043] usb usb1: bus auto-suspend
Jul  3 08:46:40 zumbi kernel: [   37.027046] ehci_hcd 0000:00:1a.7: suspend 
root hub
Jul  3 08:46:40 zumbi kernel: [   37.027067] hub 3-0:1.0: hub_suspend
Jul  3 08:46:40 zumbi kernel: [   37.027071] usb usb3: bus auto-suspend
Jul  3 08:46:40 zumbi kernel: [   37.027073] usb usb3: suspend_rh
Jul  3 08:46:40 zumbi kernel: [   37.027088] hub 4-0:1.0: hub_suspend
Jul  3 08:46:40 zumbi kernel: [   37.027091] usb usb4: bus auto-suspend
Jul  3 08:46:40 zumbi kernel: [   37.027093] usb usb4: suspend_rh
Jul  3 08:46:40 zumbi kernel: [   37.027107] hub 5-0:1.0: hub_suspend
Jul  3 08:46:40 zumbi kernel: [   37.027110] usb usb5: bus auto-suspend
Jul  3 08:46:40 zumbi kernel: [   37.027112] usb usb5: suspend_rh
Jul  3 08:46:40 zumbi kernel: [   37.027126] hub 7-0:1.0: hub_suspend
Jul  3 08:46:40 zumbi kernel: [   37.027129] usb usb7: bus auto-suspend
Jul  3 08:46:40 zumbi kernel: [   37.027131] usb usb7: suspend_rh
Jul  3 08:46:40 zumbi kernel: [   37.027147] hub 8-0:1.0: hub_suspend
Jul  3 08:46:40 zumbi kernel: [   37.027149] usb usb8: bus auto-suspend
Jul  3 08:46:40 zumbi kernel: [   37.027150] usb usb8: suspend_rh
Jul  3 08:46:40 zumbi kernel: [   37.027163] hub 2-0:1.0: hub_suspend
Jul  3 08:46:40 zumbi kernel: [   37.027165] usb usb2: bus auto-suspend
Jul  3 08:46:40 zumbi kernel: [   37.027166] ehci_hcd 0000:00:1d.7: suspend 
root hub
Jul  3 08:46:40 zumbi kernel: [   39.645216] udevd version 124 started
Jul  3 08:46:40 zumbi kernel: [   39.671732] usb usb3: uevent
Jul  3 08:46:40 zumbi kernel: [   39.671754] usb 3-0:1.0: uevent
Jul  3 08:46:40 zumbi kernel: [   39.671833] usb usb4: uevent
Jul  3 08:46:40 zumbi kernel: [   39.671846] usb 4-0:1.0: uevent
Jul  3 08:46:40 zumbi kernel: [   39.671926] usb usb5: uevent
Jul  3 08:46:40 zumbi kernel: [   39.671946] usb 5-0:1.0: uevent
Jul  3 08:46:40 zumbi kernel: [   39.672104] usb usb1: uevent
Jul  3 08:46:40 zumbi kernel: [   39.672137] usb 1-0:1.0: uevent
Jul  3 08:46:40 zumbi kernel: [   39.672627] usb usb6: uevent
Jul  3 08:46:40 zumbi kernel: [   39.672640] usb 6-0:1.0: uevent
Jul  3 08:46:40 zumbi kernel: [   39.672663] usb 6-1: uevent
Jul  3 08:46:40 zumbi kernel: [   39.672676] usb 6-1:1.0: uevent
Jul  3 08:46:40 zumbi kernel: [   39.672828] usb 6-2: uevent
Jul  3 08:46:40 zumbi kernel: [   39.672848] usb 6-2:1.0: uevent
Jul  3 08:46:40 zumbi kernel: [   39.672973] usb 6-2:1.1: uevent
Jul  3 08:46:40 zumbi kernel: [   39.673217] usb usb7: uevent
Jul  3 08:46:40 zumbi kernel: [   39.673238] usb 7-0:1.0: uevent
Jul  3 08:46:40 zumbi kernel: [   39.673418] usb usb8: uevent
Jul  3 08:46:40 zumbi kernel: [   39.673450] usb 8-0:1.0: uevent
Jul  3 08:46:40 zumbi kernel: [   39.673618] usb usb2: uevent
Jul  3 08:46:40 zumbi kernel: [   39.673649] usb 2-0:1.0: uevent
Jul  3 08:46:40 zumbi kernel: [   40.563732] Adding 11847896k swap on 
/dev/sda5.  Priority:-1 extents:1 across:11847896k 
Jul  3 08:46:40 zumbi kernel: [   40.874894] EXT3 FS on sda1, internal journal
Jul  3 08:46:40 zumbi kernel: [   41.265459] tg3 0000:08:00.0: PME# disabled
Jul  3 08:46:40 zumbi kernel: [   41.354123] ADDRCONF(NETDEV_UP): eth0: link is 
not ready
Jul  3 08:46:40 zumbi kernel: [   44.477154] tg3: eth0: Link is up at 1000 
Mbps, full duplex.
Jul  3 08:46:40 zumbi kernel: [   44.477156] tg3: eth0: Flow control is off for 
TX and off for RX.
Jul  3 08:46:40 zumbi kernel: [   44.477677] ADDRCONF(NETDEV_CHANGE): eth0: 
link becomes ready
Jul  3 08:46:40 zumbi kernel: [   46.939162] svc: failed to register lockdv1 
RPC service (errno 97).
Jul  3 08:46:40 zumbi kernel: [   46.941181] mount.nfs used greatest stack 
depth: 3328 bytes left
Jul  3 08:46:40 zumbi kernel: [   48.293056] warning: `avahi-daemon' uses 
32-bit capabilities (legacy support in use)
Jul  3 08:46:47 zumbi kernel: [   55.324471] eth0: no IPv6 routers present
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
<Prev in Thread] Current Thread [Next in Thread>