On Wed, Dec 3, 2008 at 7:34 PM, Andrew Lyon <andrew.lyon@xxxxxxxxx> wrote:
> On Wed, Dec 3, 2008 at 6:48 PM, Boris Derzhavets <bderzhavets@xxxxxxxxx>
> wrote:
>> Andy,
>>
>> I am a bit confused , trying to follow up the thread running by Todd and
>> you.
>> Are this messages coming up on your box ?
>>
>> pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
>> pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
>
> Yes they are, along with several other messages that look bad:
Those messages are also present with 2.6.27.7:
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
Andy
>
> (XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=4
> (XEN) ioapic_guest_write: old_entry=000009f1, new_entry=000189f1
> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
>
> (XEN) unexpected IRQ trap at vector 59
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> (XEN) unexpected IRQ trap at vector 59
> ata1.00: qc timeout (cmd 0xec)
> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
> (XEN) unexpected IRQ trap at vector 59
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> (XEN) unexpected IRQ trap at vector 59
> ata1.00: qc timeout (cmd 0xec)
>
> Kernel 2.6.27.7 vanilla or patched with opensuse xen dom0 patches
> detects the controller correctly using ahci driver:
>
> optiplex755 ~ # uname -a
> Linux optiplex755 2.6.27-xen-r3 #1 SMP Tue Dec 2 16:05:20 GMT 2008
> x86_64 Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz GenuineIntel GNU/Linux
>
> optiplex755 ~ # lsscsi -H
> [0] ahci
> [1] ahci
> [2] ahci
> [3] ahci
> [4] ahci
> [5] ahci
> [6] usb-storage
>
> optiplex755 ~ # dmesg | grep -E "ahca|scsi|sd|ata"
> Command line: root=/dev/sda2 swiotlb=256 pciback.hide=(03:02.0) console=xvc0
> PERCPU: Allocating 43104 bytes of per cpu data
> Kernel command line: root=/dev/sda2 swiotlb=256 pciback.hide=(03:02.0)
> console=xvc0
> Memory: 3627084k/3847584k available (2956k kernel code, 212136k
> reserved, 1580k data, 264k init)
> libata version 3.00 loaded.
> Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
> Driver 'sd' needs updating - please use bus_type methods
> scsi0 : ahci
> scsi1 : ahci
> scsi2 : ahci
> scsi3 : ahci
> scsi4 : ahci
> scsi5 : ahci
> ata1: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 18
> ata2: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 18
> ata3: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970200 irq 18
> ata4: DUMMY
> ata5: DUMMY
> ata6: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970380 irq 18
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata1.00: ATA-7: TOSHIBA MK6034GSX, AH101A, max UDMA/100
> ata1.00: 117210240 sectors, multi 16: LBA48 NCQ (depth 31/32)
> ata1.00: configured for UDMA/100
> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata2.00: ATAPI: HL-DT-ST DVD+/-RW GSA-H73N, B103, max UDMA/100
> ata2.00: configured for UDMA/100
> ata3: SATA link down (SStatus 4 SControl 300)
> ata6: SATA link down (SStatus 4 SControl 300)
> scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK6034GS AH10 PQ: 0 ANSI: 5
> sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
> support DPO or FUA
> sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
> support DPO or FUA
> sda: sda1 sda2 sda3
> sd 0:0:0:0: [sda] Attached SCSI disk
> sd 0:0:0:0: Attached scsi generic sg0 type 0
> scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-H73N B103 PQ: 0 ANSI: 5
> sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
> sr 1:0:0:0: Attached scsi CD-ROM sr0
> sr 1:0:0:0: Attached scsi generic sg1 type 5
> scsi6 : SCSI emulation for USB Mass Storage devices
> EXT3-fs: mounted filesystem with ordered data mode.
> scsi 6:0:0:0: Direct-Access TEAC USB HS-CF Card 4.08 PQ: 0 ANSI: 0
> sd 6:0:0:0: [sdb] Attached SCSI removable disk
> sd 6:0:0:0: Attached scsi generic sg2 type 0
>
> Andy
>
>>
>> Boris
>>
>> --- On Wed, 12/3/08, Andrew Lyon <andrew.lyon@xxxxxxxxx> wrote:
>>
>> From: Andrew Lyon <andrew.lyon@xxxxxxxxx>
>> Subject: Re: pv_ops dom0 testing
>> To: bderzhavets@xxxxxxxxx, deshantm@xxxxxxxxx, "Jeremy Fitzhardinge"
>> <jeremy@xxxxxxxx>, xen-devel@xxxxxxxxxxxxxxxxxxx
>> Date: Wednesday, December 3, 2008, 1:03 PM
>>
>> Boris,
>>
>> It does support ahci, and it works with other kernels, the problem is
>> that I am testing pvops dom0 kernel and it does not work with that.
>>
>> I included the same drivers I use successfully with other kernels, the
>> problem is with the pvops dom0 kernel.
>>
>> Andy
>>
>> On 03/12/2008, Boris Derzhavets <bderzhavets@xxxxxxxxx> wrote:
>>>
>>>
>>> --- On Wed, 12/3/08, Andrew Lyon
>> <andrew.lyon@xxxxxxxxx> wrote:
>>> From: Andrew Lyon <andrew.lyon@xxxxxxxxx>
>>> Subject: Re: [Xen-devel] pv_ops dom0 testing
>>> To: deshantm@xxxxxxxxx
>>> Cc: "Jeremy Fitzhardinge" <jeremy@xxxxxxxx>,
>> xen-devel@xxxxxxxxxxxxxxxxxxx
>>> Date: Wednesday, December 3, 2008, 12:10 PM
>>>
>>> On Wed, Dec 3, 2008 at 4:43 PM, Todd Deshane <deshantm@xxxxxxxxx>
>> wrote:
>>>>
>>>>
>>>>> I had the system setup to output to serial and vga console
>>>>> (console=vga,com1) but it seems that the vga console only displays
>> Xen
>>>>> debug messages,
>>>>
>>>> Here is my grub debug setup for reference
>>>>
>>>> title Xen 3.4-unstable DEBUG/ Ubuntu 8.10, kernel
>> 2.6.28-rc6-tip
>>>> root (hd0,0)
>>>> kernel /boot/xen-3.4-unstable.gz loglvl=all guest_loglvl=all
>>>> com1=115200,8n1 console=com1
>> mem=3G
>>>> module /boot/vmlinuz-2.6.28-rc6-tip root=/dev/sda1 ro
>>> console=hvc0
>>>> earlyprintk=xen xencons=ttyS0,115200 nousb
>>>> module /boot/initrd.img-2.6.28-rc6-tip
>>>>
>>>>
>>>>>
>>>>> I hooked up a null modem cable and I've now captured
>>>>> the full xen and linux dmesg, it appears that the onboard intel
>> ahci
>>>>> sata is not working so the kernel is unable to run init:
>>>>>
>>>>> __ __ _____ _____ ___
>>>>>
>>>>> \ \/ /___ _ __ |___ / |___ / / _ \
>>>>>
>>>>> \ // _ \ '_ \ |_ \ |_ \| | | |
>>>>>
>>>>> / \ __/ | | | ___) | ___) | |_| |
>>>>>
>>>>> /_/\_\___|_| |_| |____(_)____(_)___/
>>>>>
>>>>>
>>>>>
>>>>> (XEN) Xen version 3.3.0 (root@(none)) (gcc version 4.1.2
>> (Gentoo
>> 4.1.2
>>>>> p1.0.2)) Tue Dec 2 15:55:55 GMT 2008
>>>>>
>>>>> (XEN) Latest ChangeSet: unavailable
>>>>>
>>>>> (XEN) Command line: com1=115200,8n1 console=vga,com1
>>>>>
>>>>> (XEN) Video information:
>>>>>
>>>>> (XEN) VGA is text mode 80x25, font 8x16
>>>>>
>>>>> (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
>>>>>
>>>>> (XEN) Disc information:
>>>>>
>>>>> (XEN) Found 1 MBR signatures
>>>>>
>>>>> (XEN) Found 1 EDD information structures
>>>>>
>>>>> (XEN) Xen-e820 RAM map:
>>>>>
>>>>> (XEN) 0000000000000000 - 000000000009ec00 (usable)
>>>>>
>>>>> (XEN) 00000000000f0000 - 0000000000100000 (reserved)
>>>>>
>>>>> (XEN) 0000000000100000 - 00000000cfdff800
>> (usable)
>>>>>
>>>>> (XEN) 00000000cfdff800 - 00000000cfe53c00 (ACPI NVS)
>>>>>
>>>>> (XEN) 00000000cfe53c00 - 00000000cfe55c00 (ACPI data)
>>>>>
>>>>> (XEN) 00000000cfe55c00 - 00000000d0000000 (reserved)
>>>>>
>>>>> (XEN) 00000000e0000000 - 00000000f0000000 (reserved)
>>>>>
>>>>> (XEN) 00000000fec00000 - 00000000fed00400 (reserved)
>>>>>
>>>>> (XEN) 00000000fed20000 - 00000000feda0000 (reserved)
>>>>>
>>>>> (XEN) 00000000fee00000 - 00000000fef00000 (reserved)
>>>>>
>>>>> (XEN) 00000000ffb00000 - 0000000100000000 (reserved)
>>>>>
>>>>> (XEN) 0000000100000000 - 0000000128000000 (usable)
>>>>>
>>>>> (XEN) System RAM: 3965MB (4060788kB)
>>>>>
>>>>> (XEN) ACPI: RSDP 000FEC00, 0024 (r2 DELL )
>>>>>
>>>>> (XEN)
>> ACPI: XSDT 000FC5B3, 008C (r1 DELL B9K 15 ASL
>>>>> 61)
>>>>>
>>>>> (XEN) ACPI: FACP 000FC6E3, 00F4 (r3 DELL B9K 15 ASL
>>>>> 61)
>>>>>
>>>>> (XEN) ACPI: DSDT FFF76B39, 4596 (r1 DELL dt_ex 1000 INTL
>>>>> 20050624)
>>>>>
>>>>> (XEN) ACPI: FACS CFDFF800, 0040
>>>>>
>>>>> (XEN) ACPI: SSDT FFF7B1EE, 00AA (r1 DELL st_ex 1000 INTL
>>>>> 20050624)
>>>>>
>>>>> (XEN) ACPI: APIC 000FC7D7, 0092 (r1 DELL B9K 15 ASL
>>>>> 61)
>>>>>
>>>>> (XEN) ACPI: BOOT 000FC869, 0028 (r1 DELL B9K 15 ASL
>>>>> 61)
>>>>>
>>>>> (XEN) ACPI: ASF! 000FC891, 0096 (r32 DELL B9K 15 ASL
>>>>> 61)
>>>>>
>>>>> (XEN) ACPI: MCFG 000FC927, 003E (r1 DELL B9K 15
>> ASL
>>>>> 61)
>>>>>
>>>>> (XEN) ACPI: HPET 000FC965, 0038 (r1 DELL B9K 15 ASL
>>>>> 61)
>>>>>
>>>>> (XEN) ACPI: TCPA 000FCBC1, 0032 (r1 DELL B9K 15 ASL
>>>>> 61)
>>>>>
>>>>> (XEN) ACPI: DMAR 000FCBF3, 00D0 (r1 DELL B9K 15 ASL
>>>>> 61)
>>>>>
>>>>> (XEN) ACPI: SLIC 000FC99D, 0176 (r1 DELL B9K 15 ASL
>>>>> 61)
>>>>>
>>>>> (XEN) ACPI: SSDT CFDFF840, 01F9 (r1 DpgPmm Cpu0Ist 11 INTL
>>>>> 20050624)
>>>>>
>>>>> (XEN) ACPI: SSDT CFDFFC49, 01F9 (r1 DpgPmm Cpu1Ist 11 INTL
>>>>> 20050624)
>>>>>
>>>>> (XEN) ACPI: SSDT CFE00052, 0140 (r1 DpgPmm CpuPm 10 INTL
>>>>> 20050624)
>>>>>
>>>>> (XEN) Xen heap: 14MB (14632kB)
>>>>>
>>>>>
>> (XEN) Domain heap initialised
>>>>>
>>>>> (XEN) Processor #0 6:15 APIC version 20
>>>>>
>>>>> (XEN) Processor #1 6:15 APIC version 20
>>>>>
>>>>> (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI
>> 0-23
>>>>>
>>>>> (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
>>>>>
>>>>> (XEN) Using scheduler: SMP Credit Scheduler (credit)
>>>>>
>>>>> (XEN) Detected 2394.042 MHz processor.
>>>>>
>>>>> (XEN) HVM: VMX enabled
>>>>>
>>>>> (XEN) CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz
>> stepping
>>> 06
>>>>>
>>>>> (XEN) Booting processor 1/1 eip 8c000
>>>>>
>>>>> (XEN) CPU1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz
>> stepping
>>> 06
>>>>>
>>>>> (XEN) Total of 2 processors
>> activated.
>>>>>
>>>>> (XEN) ENABLING IO-APIC IRQs
>>>>>
>>>>> (XEN) -> Using new ACK method
>>>>>
>>>>> (XEN) checking TSC synchronization across 2 CPUs: passed.
>>>>>
>>>>> (XEN) Platform timer is 14.318MHz HPET
>>>>>
>>>>> (XEN) Brought up 2 CPUs
>>>>>
>>>>> (XEN) I/O virtualisation disabled
>>>>>
>>>>> (XEN) *** LOADING DOMAIN 0 ***
>>>>>
>>>>> (XEN) Xen kernel: 64-bit, lsb, compat32
>>>>>
>>>>> (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x200000 ->
>> 0x777e68
>>>>>
>>>>> (XEN) PHYSICAL MEMORY ARRANGEMENT:
>>>>>
>>>>> (XEN) Dom0 alloc.: 0000000123000000->0000000124000000
>> (958126
>>> pages
>>>>> to be allocated)
>>>>>
>>>>> (XEN) VIRTUAL MEMORY
>> ARRANGEMENT:
>>>>>
>>>>> (XEN) Loaded kernel: ffffffff80200000->ffffffff80777e68
>>>>>
>>>>> (XEN) Init. ramdisk: ffffffff80778000->ffffffff80778000
>>>>>
>>>>> (XEN) Phys-Mach map: ffffffff80778000->ffffffff80ecf570
>>>>>
>>>>> (XEN) Start info: ffffffff80ed0000->ffffffff80ed04a4
>>>>>
>>>>> (XEN) Page tables: ffffffff80ed1000->ffffffff80edc000
>>>>>
>>>>> (XEN) Boot stack: ffffffff80edc000->ffffffff80edd000
>>>>>
>>>>> (XEN) TOTAL: ffffffff80000000->ffffffff81000000
>>>>>
>>>>> (XEN) ENTRY ADDRESS: ffffffff8064f200
>>>>>
>>>>> (XEN) Dom0 has maximum 2 VCPUs
>>>>>
>>>>> (XEN) Scrubbing Free RAM: .done.
>>>>>
>>>>> (XEN) Xen trace buffers: disabled
>>>>>
>>>>> (XEN) Std.
>> Loglevel: Errors and warnings
>>>>>
>>>>> (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
>>>>>
>>>>> (XEN) Xen is relinquishing VGA console.
>>>>>
>>>>> (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three
>> times
>>> to switch
>>>>> input to Xen)
>>>>>
>>>>> (XEN) Freed 108kB init memory.
>>>>>
>>>>> mapping kernel into physical memory
>>>>>
>>>>> Xen: setup ISA identity maps
>>>>>
>>>>> about to get started...
>>>>>
>>>>> PAT disabled on Xen
>>>>>
>>>>> Linux version 2.6.28-rc6-tip (root@optiplex755) (gcc version 4.1.2
>>>>> (Gentoo 4.1.2 p1.0.2)) #2 SMP Wed Dec 3 15:24:08 GMT 2008
>>>>>
>>>>> Command line: root=/dev/sda2 console=hvc0 earlyprintk=xen
>>>>>
>>>>> KERNEL supported
>> cpus:
>>>>>
>>>>> Intel GenuineIntel
>>>>>
>>>>> AMD AuthenticAMD
>>>>>
>>>>> Centaur CentaurHauls
>>>>>
>>>>> BIOS-provided physical RAM map:
>>>>>
>>>>> Xen: 0000000000000000 - 00000000000a0000 (usable)
>>>>>
>>>>> Xen: 00000000000a0000 - 0000000000100000 (reserved)
>>>>>
>>>>> Xen: 0000000000100000 - 0000000000778000 (usable)
>>>>>
>>>>> Xen: 0000000000778000 - 0000000000ed1000 (reserved)
>>>>>
>>>>> Xen: 0000000000ed1000 - 00000000eaeae000 (usable)
>>>>>
>>>>> console [xenboot0] enabled
>>>>>
>>>>> DMI 2.5 present.
>>>>>
>>>>> last_pfn = 0xeaeae max_arch_pfn = 0x3ffffffff
>>>>>
>>>>> init_memory_mapping: 0000000000000000-00000000eaeae000
>>>>>
>>>>> last_map_addr:
>> eaeae000 end: eaeae000
>>>>>
>>>>> ACPI: RSDP 000FEC00, 0024 (r2 DELL )
>>>>>
>>>>> ACPI: XSDT 000FC5B3, 008C (r1 DELL B9K 15 ASL
>> 61)
>>>>>
>>>>> ACPI: FACP 000FC6E3, 00F4 (r3 DELL B9K 15 ASL
>> 61)
>>>>>
>>>>> ACPI: DSDT FFF76B39, 4596 (r1 DELL dt_ex 1000 INTL
>> 20050624)
>>>>>
>>>>> ACPI: FACS CFDFF800, 0040
>>>>>
>>>>> ACPI: SSDT FFF7B1EE, 00AA (r1 DELL st_ex 1000 INTL
>> 20050624)
>>>>>
>>>>> ACPI: APIC 000FC7D7, 0092 (r1 DELL B9K 15 ASL
>> 61)
>>>>>
>>>>> ACPI: BOOT 000FC869, 0028 (r1 DELL B9K 15 ASL
>> 61)
>>>>>
>>>>> ACPI: ASF! 000FC891, 0096 (r32 DELL B9K 15 ASL
>> 61)
>>>>>
>>>>> ACPI: MCFG 000FC927, 003E (r1 DELL B9K
>> 15 ASL
>> 61)
>>>>>
>>>>> ACPI: HPET 000FC965, 0038 (r1 DELL B9K 15 ASL
>> 61)
>>>>>
>>>>> ACPI: TCPA 000FCBC1, 0032 (r1 DELL B9K 15 ASL
>> 61)
>>>>>
>>>>> ACPI: DMAR 000FCBF3, 00D0 (r1 DELL B9K 15 ASL
>> 61)
>>>>>
>>>>> ACPI: SLIC 000FC99D, 0176 (r1 DELL B9K 15 ASL
>> 61)
>>>>>
>>>>> ACPI: SSDT CFDFF840, 01F9 (r1 DpgPmm Cpu0Ist 11 INTL
>> 20050624)
>>>>>
>>>>> ACPI: SSDT CFDFFC49, 01F9 (r1 DpgPmm Cpu1Ist 11 INTL
>> 20050624)
>>>>>
>>>>> ACPI: SSDT CFE00052, 0140 (r1 DpgPmm CpuPm 10 INTL
>> 20050624)
>>>>>
>>>>> ACPI: DMI detected: Dell OptiPlex 755
>>>>>
>>>>> (5 early reservations) ==> bootmem [0000000000 - 00eaeae000]
>>>>>
>>>>> #0
>> [0000000000 - 0000001000] BIOS data page ==> [0000000000
>> -
>>>>> 0000001000]
>>>>>
>>>>> #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000
>> -
>>>>> 0000008000]
>>>>>
>>>>> #2 [0000ed1000 - 0000edc000] XEN PAGETABLES ==> [0000ed1000
>> -
>>>>> 0000edc000]
>>>>>
>>>>> #3 [0000200000 - 0000777e68] TEXT DATA BSS ==> [0000200000
>> -
>>>>> 0000777e68]
>>>>>
>>>>> #4 [0000edc000 - 000162b000] PGTABLE ==> [0000edc000
>> -
>>>>> 000162b000]
>>>>>
>>>>> found SMP MP-table at [ffff8800000fe710] 000fe710
>>>>>
>>>>> Zone PFN ranges:
>>>>>
>>>>> DMA 0x00000000 -> 0x00001000
>>>>>
>>>>> DMA32 0x00001000 -> 0x00100000
>>>>>
>>>>> Normal 0x00100000 ->
>> 0x00100000
>>>>>
>>>>> Movable zone start PFN for each node
>>>>>
>>>>> early_node_map[3] active PFN ranges
>>>>>
>>>>> 0: 0x00000000 -> 0x000000a0
>>>>>
>>>>> 0: 0x00000100 -> 0x00000778
>>>>>
>>>>> 0: 0x00000ed1 -> 0x000eaeae
>>>>>
>>>>> ACPI: PM-Timer IO Port: 0x808
>>>>>
>>>>> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>>>>>
>>>>> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>>>>>
>>>>> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
>>>>>
>>>>> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
>>>>>
>>>>> ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
>>>>>
>>>>> ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
>>>>>
>>>>> ACPI: LAPIC
>> (acpi_id[0x07] lapic_id[0x02] disabled)
>>>>>
>>>>> ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
>>>>>
>>>>> ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
>>>>>
>>>>> ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>>>>>
>>>>> IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23
>>>>>
>>>>> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>>>>>
>>>>> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>>>>>
>>>>> ACPI: HPET id: 0x8086a301 base: 0xfed00000
>>>>>
>>>>> Using ACPI (MADT) for SMP configuration information
>>>>>
>>>>> SMP: Allowing 2 CPUs, 0 hotplug CPUs
>>>>>
>>>>> (XEN) ioapic_guest_write: apic=0, pin=2, old_irq=0, new_irq=-1
>>>>>
>>>>> (XEN) ioapic_guest_write:
>> old_entry=000009f0, new_entry=00010900
>>>>>
>>>>> (XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use
>> IRQ!
>>>>>
>>>>> (XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=-1
>>>>>
>>>>> (XEN) ioapic_guest_write: old_entry=000009f1, new_entry=00010900
>>>>>
>>>>> (XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use
>> IRQ!
>>>>>
>>>>> Allocating PCI resources starting at ec000000 (gap:
>> eaeae000:15152000)
>>>>>
>>>>> PERCPU: Allocating 57344 bytes of per cpu data
>>>>>
>>>>> Built 1 zonelists in Zone order, mobility grouping on. Total
>> pages:
>>>>> 945674
>>>>>
>>>>> Kernel command line: root=/dev/sda2 console=hvc0 earlyprintk=xen
>>>>>
>>>>> Initializing CPU#0
>>>>>
>>>>> xen: allocated irq 9 for acpi
>> 9
>>>>>
>>>>> PID hash table entries: 4096 (order: 12, 32768 bytes)
>>>>>
>>>>> Detected 2394.042 MHz processor.
>>>>>
>>>>> Console: colour dummy device 80x25
>>>>>
>>>>> console handover: boot [xenboot0] -> real [hvc0]
>>>>>
>>>>> Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>>>>>
>>>>> Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>>>>>
>>>>> Checking aperture...
>>>>>
>>>>> No AGP bridge found
>>>>>
>>>>> PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>>>>>
>>>>> Placing software IO TLB between 0x51ca000 - 0x91ca000
>>>>>
>>>>> Memory: 3701108k/3848888k available (2519k kernel code, 7908k
>> absent,
>>>>> 139388k reserved, 1546k data, 420k
>> init)
>>>>>
>>>>> installing Xen timer for CPU 0
>>>>>
>>>>> Calibrating delay loop (skipped), value calculated using timer
>>>>> frequency.. 4788.08 BogoMIPS (lpj=9576168)
>>>>>
>>>>> Mount-cache hash table entries: 256
>>>>>
>>>>> CPU: L1 I cache: 32K, L1 D cache: 32K
>>>>>
>>>>> CPU: L2 cache: 4096K
>>>>>
>>>>> CPU: Physical Processor ID: 0
>>>>>
>>>>> CPU: Processor Core ID: 0
>>>>>
>>>>> SMP alternatives: switching to UP code
>>>>>
>>>>> ACPI: Core revision 20080926
>>>>>
>>>>> cpu 0 spinlock event irq 17
>>>>>
>>>>> installing Xen timer for CPU 1
>>>>>
>>>>> cpu 1 spinlock event irq 23
>>>>>
>>>>> SMP alternatives: switching to SMP code
>>>>>
>>>>> Initializing
>> CPU#1
>>>>>
>>>>> CPU: L1 I cache: 32K, L1 D cache: 32K
>>>>>
>>>>> CPU: L2 cache: 4096K
>>>>>
>>>>> CPU: Physical Processor ID: 0
>>>>>
>>>>> CPU: Processor Core ID: 0
>>>>>
>>>>> Brought up 2 CPUs
>>>>>
>>>>> net_namespace: 552 bytes
>>>>>
>>>>> Booting paravirtualized kernel on Xen
>>>>>
>>>>> Xen version: 3.3.0 (preserve-AD) (dom0)
>>>>>
>>>>> Grant table initialized
>>>>>
>>>>> NET: Registered protocol family 16
>>>>>
>>>>> xenbus_probe_init ok
>>>>>
>>>>> ACPI FADT declares the system doesn't support PCIe ASPM, so
>>> disable it
>>>>>
>>>>> ACPI: bus type pci registered
>>>>>
>>>>> PCI: Using configuration type 1 for base access
>>>>>
>>>>> ACPI:
>> Interpreter enabled
>>>>>
>>>>> ACPI: (supports S0 S5)
>>>>>
>>>>> ACPI: Using IOAPIC for interrupt routing
>>>>>
>>>>> ACPI: ACPI Dock Station Driver: 1 docks/bays found
>>>>>
>>>>> ACPI: PCI Root Bridge [PCI0] (0000:00)
>>>>>
>>>>> pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>>>>>
>>>>> pci 0000:00:01.0: PME# disabled
>>>>>
>>>>> pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
>>>>>
>>>>> pci 0000:00:03.0: PME# disabled
>>>>>
>>>>> pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>>>>>
>>>>> pci 0000:00:19.0: PME# disabled
>>>>>
>>>>> pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>>>>>
>>>>> pci 0000:00:1a.7: PME# disabled
>>>>>
>>>>> pci 0000:00:1b.0: PME# supported
>> from D0 D3hot D3cold
>>>>>
>>>>> pci 0000:00:1b.0: PME# disabled
>>>>>
>>>>> pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>>>>>
>>>>> pci 0000:00:1c.0: PME# disabled
>>>>>
>>>>> pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>>>>>
>>>>> pci 0000:00:1d.7: PME# disabled
>>>>>
>>>>> pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6
>>> ACPI/GPIO/TCO
>>>>>
>>>>> pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
>>>>>
>>>>> pci 0000:00:1f.2: PME# supported from D3hot
>>>>>
>>>>> pci 0000:00:1f.2: PME# disabled
>>>>>
>>>>> pci 0000:00:1e.0: transparent bridge
>>>>>
>>>>> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>>>>>
>>>>> ACPI: PCI Interrupt Link [LNKB] (IRQs
>> 3 4 *5 6 7 9 10 11 12 15)
>>>>>
>>>>> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>>>>>
>>>>> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>>>>>
>>>>> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0,
>>>>> disabled.
>>>>>
>>>>> ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 15)
>>>>>
>>>>> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>>>>>
>>>>> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>>>>>
>>>>> ACPI Warning (tbutils-0217): Incorrect checksum in table [TCPA] -
>> 00,
>>>>> should be 87 [20080926]
>>>>>
>>>>> xen_balloon: Initialising balloon driver.
>>>>>
>>>>> SCSI subsystem initialized
>>>>>
>>>>> PCI: Using ACPI for IRQ
>> routing
>>>>>
>>>>> pci 0000:00:01.0: BAR 9: can't allocate resource
>>>>>
>>>>> pci 0000:01:00.0: BAR 0: can't allocate resource
>>>>>
>>>>> Xen: Initializing Xen DMA ops
>>>>>
>>>>> Xen: Enabling DMA fallback to swiotlb
>>>>>
>>>>> PCI-GART: No AMD GART found.
>>>>>
>>>>> pnp: PnP ACPI init
>>>>>
>>>>> ACPI: bus type pnp registered
>>>>>
>>>>> pnp 00:01: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 7
>>>>> (0x800-0x87f), disabling
>>>>>
>>>>> pnp 00:01: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 7
>>>>> (0x800-0x87f), disabling
>>>>>
>>>>> system 00:01: ioport range 0xc00-0xc7f has been reserved
>>>>>
>>>>> xen_set_ioapic_routing: irq 13 gsi 13 vector 120 ioapic 0 pin 13
>>>>> triggering 1
>> polarity 0
>>>>>
>>>>> xen_set_ioapic_routing: irq 8 gsi 8 vector 80 ioapic 0 pin 8
>>>>> triggering 1 polarity 0
>>>>>
>>>>> xen_set_ioapic_routing: irq 7 gsi 7 vector 72 ioapic 0 pin 7
>>>>> triggering 1 polarity 0
>>>>>
>>>>> xen_set_ioapic_routing: irq 4 gsi 4 vector 241 ioapic 0 pin 4
>>>>> triggering 1 polarity 0
>>>>>
>>>>> (XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=4
>>>>>
>>>>> (XEN) ioapic_guest_write: old_entry=000009f1, new_entry=000189f1
>>>>>
>>>>> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use
>>> IRQ!
>>>>>
>>>>> pnp: PnP ACPI: found 9 devices
>>>>>
>>>>> ACPI: ACPI bus type pnp unregistered
>>>>>
>>>>> pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>>>>>
>>>>> pci
>> 0000:00:01.0: IO window: 0xd000-0xdfff
>>>>>
>>>>> pci 0000:00:01.0: MEM window: 0xfe900000-0xfeafffff
>>>>>
>>>>> pci 0000:00:01.0: PREFETCH window:
>> 0x00000100000000-0x0000010fffffff
>>>>>
>>>>> pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
>>>>>
>>>>> pci 0000:00:1c.0: IO window: disabled
>>>>>
>>>>> pci 0000:00:1c.0: MEM window: 0xfe800000-0xfe8fffff
>>>>>
>>>>> pci 0000:00:1c.0: PREFETCH window: disabled
>>>>>
>>>>> pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
>>>>>
>>>>> pci 0000:00:1e.0: IO window: disabled
>>>>>
>>>>> pci 0000:00:1e.0: MEM window: disabled
>>>>>
>>>>> pci 0000:00:1e.0: PREFETCH window: disabled
>>>>>
>>>>> xen_set_ioapic_routing: irq 29 gsi 16 vector 152 ioapic 0 pin
>> 16
>>>>> triggering 0 polarity 1
>>>>>
>>>>> pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 29
>>>>>
>>>>> xen: PCI device 0000:00:01.0 pin 1 -> irq 29
>>>>>
>>>>> xen_allocate_pirq: returning irq 29 for gsi 16
>>>>>
>>>>> xen_set_ioapic_routing: irq 29 gsi 16 vector 152 ioapic 0 pin 16
>>>>> triggering 0 polarity 1
>>>>>
>>>>> pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 29
>>>>>
>>>>> xen: PCI device 0000:00:1c.0 pin 1 -> irq 29
>>>>>
>>>>> bus: 00 index 0 io port: [0x00-0xffff]
>>>>>
>>>>> bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
>>>>>
>>>>> bus: 01 index 0 io port: [0xd000-0xdfff]
>>>>>
>>>>> bus: 01 index 1 mmio: [0xfe900000-0xfeafffff]
>>>>>
>>>>> bus: 01
>> index 2 mmio: [0x100000000-0x10fffffff]
>>>>>
>>>>> bus: 01 index 3 mmio: [0x0-0x0]
>>>>>
>>>>> bus: 02 index 0 mmio: [0x0-0x0]
>>>>>
>>>>> bus: 02 index 1 mmio: [0xfe800000-0xfe8fffff]
>>>>>
>>>>> bus: 02 index 2 mmio: [0x0-0x0]
>>>>>
>>>>> bus: 02 index 3 mmio: [0x0-0x0]
>>>>>
>>>>> bus: 03 index 0 mmio: [0x0-0x0]
>>>>>
>>>>> bus: 03 index 1 mmio: [0x0-0x0]
>>>>>
>>>>> bus: 03 index 2 mmio: [0x0-0x0]
>>>>>
>>>>> bus: 03 index 3 io port: [0x00-0xffff]
>>>>>
>>>>> bus: 03 index 4 mmio: [0x000000-0xffffffffffffffff]
>>>>>
>>>>> NET: Registered protocol family 2
>>>>>
>>>>> IP route cache hash table entries: 131072 (order: 8, 1048576
>> bytes)
>>>>>
>>>>> TCP established hash table entries: 262144
>> (order: 10, 4194304
>> bytes)
>>>>>
>>>>> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>>>>>
>>>>> TCP: Hash tables configured (established 262144 bind 65536)
>>>>>
>>>>> TCP reno registered
>>>>>
>>>>> NET: Registered protocol family 1
>>>>>
>>>>> Simple Boot Flag at 0x7a set to 0x1
>>>>>
>>>>> Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
>>>>>
>>>>> msgmni has been set to 7517
>>>>>
>>>>> io scheduler noop registered
>>>>>
>>>>> io scheduler cfq registered (default)
>>>>>
>>>>> pcieport-driver 0000:00:01.0: found MSI capability
>>>>>
>>>>> pcieport-driver 0000:00:1c.0: found MSI capability
>>>>>
>>>>> input: Power Button (FF) as /class/input/input0
>>>>>
>>>>> ACPI:
>> Power Button (FF) [PWRF]
>>>>>
>>>>> input: Power Button (CM) as /class/input/input1
>>>>>
>>>>> ACPI: Power Button (CM) [VBTN]
>>>>>
>>>>> xenbus_probe_backend_init bus registered ok
>>>>>
>>>>> xenbus_probe_frontend_init bus registered ok
>>>>>
>>>>> Event-channel device installed.
>>>>>
>>>>> ***blkif_init
>>>>>
>>>>> Real Time Clock Driver v1.12ac
>>>>>
>>>>> Linux agpgart interface v0.103
>>>>>
>>>>> floppy0: Unable to grab IRQ6 for the floppy driver
>>>>>
>>>>> brd: module loaded
>>>>>
>>>>> loop: module loaded
>>>>>
>>>>> tun: Universal TUN/TAP device driver, 1.6
>>>>>
>>>>> tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
>>>>>
>>>>> console [netcon0]
>> enabled
>>>>>
>>>>> netconsole: network logging started
>>>>>
>>>>> Driver 'sd' needs updating - please use bus_type methods
>>>>>
>>>>> Driver 'sr' needs updating - please use bus_type methods
>>>>>
>>>>> xen_set_ioapic_routing: irq 31 gsi 18 vector 160 ioapic 0 pin 18
>>>>> triggering 0 polarity 1
>>>>>
>>>>> ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ
>> 31
>>>>>
>>>>> xen: PCI device 0000:00:1f.2 pin 3 -> irq 31
>>>>>
>>>>> ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x27
>> impl
>>> SATA
>>>>> mode
>>>>>
>>>>> ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pmp pio slum
>> part
>>> ems
>>>>>
>>>>> (XEN) unexpected IRQ trap at vector 59
>>>>>
>>>>> (XEN) unexpected IRQ trap at vector
>> 59
>>>>>
>>>>> scsi0 : ahci
>>>>>
>>>>> scsi1 : ahci
>>>>>
>>>>> scsi2 : ahci
>>>>>
>>>>> scsi3 : ahci
>>>>>
>>>>> scsi4 : ahci
>>>>>
>>>>> scsi5 : ahci
>>>>>
>>>>> ata1: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970100 irq
>> 1277
>>>>>
>>>>> ata2: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970180 irq
>> 1277
>>>>>
>>>>> ata3: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970200 irq
>> 1277
>>>>>
>>>>> ata4: DUMMY
>>>>>
>>>>> ata5: DUMMY
>>>>>
>>>>> ata6: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970380 irq
>> 1277
>>>>>
>>>>> (XEN) unexpected IRQ trap at vector 59
>>>>>
>>>>> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl
>> 300)
>>>>>
>>>>> (XEN) unexpected IRQ trap at vector 59
>>>>>
>>>>> ata1.00: qc timeout (cmd 0xec)
>>>>>
>>>>> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>>>>>
>>>>> (XEN) unexpected IRQ trap at vector 59
>>>>>
>>>>> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>>>
>>>>> (XEN) unexpected IRQ trap at vector 59
>>>>>
>>>>> ata1.00: qc timeout (cmd 0xec)
>>>>>
>>>>> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>>>>>
>>>>> (XEN) unexpected IRQ trap at vector 59
>>>>>
>>>>> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>>>
>>>>> (XEN) unexpected IRQ trap at vector 59
>>>>>
>>>>> ata1.00: qc timeout (cmd 0xec)
>>>>>
>>>>> ata1.00: failed to IDENTIFY (I/O error,
>> err_mask=0x4)
>>>>>
>>>>> (XEN) unexpected IRQ trap at vector 59
>>>>>
>>>>> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>>>
>>>>> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>>>
>>>>> (XEN) unexpected IRQ trap at vector 59
>>>>>
>>>>> ata2.00: qc timeout (cmd 0xa1)
>>>>>
>>>>> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>>>>>
>>>>> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>>>
>>>>> (XEN) unexpected IRQ trap at vector 59
>>>>>
>>>>> ata2.00: qc timeout (cmd 0xa1)
>>>>>
>>>>> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>>>>>
>>>>> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>>>
>>>>> (XEN) unexpected IRQ trap at vector
>> 59
>>>>>
>>>>> ata2.00: qc timeout (cmd 0xa1)
>>>>>
>>>>> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>>>>>
>>>>> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>>>
>>>>> ata3: SATA link down (SStatus 4 SControl 300)
>>>>>
>>>>> ata6: SATA link down (SStatus 4 SControl 300)
>>>>>
>>>>> PNP: No PS/2 controller found. Probing ports directly.
>>>>>
>>>>> i8042: probe of i8042 failed with error -38
>>>>>
>>>>> mice: PS/2 mouse device common for all mice
>>>>>
>>>>> device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:
>>>>> dm-devel@xxxxxxxxxx
>>>>>
>>>>> cpuidle: using governor ladder
>>>>>
>>>>> TCP cubic registered
>>>>>
>>>>> NET: Registered protocol family
>> 17
>>>>>
>>>>> RPC: Registered udp transport module.
>>>>>
>>>>> RPC: Registered tcp transport module.
>>>>>
>>>>> IO APIC resources could be not be allocated.
>>>>>
>>>>> Root-NFS: No NFS server available, giving up.
>>>>>
>>>>> VFS: Unable to mount root fs via NFS, trying floppy.
>>>>>
>>>>> VFS: Insert root floppy and press ENTER
>>>>>
>>>>> Andy
>>>>
>>>> Looks like it is not detecting the drive correctly.
>>>>
>>>> What is your specific controller?
>>>
>>> The system is a Dell Optiplex 755 with Intel onboard sata, I'm having
>>> trouble finding the controller model and lspci only shows that it is
>>> AHCI:
>>> *********************************************************************
>>> When i open the box i can see the spec on South Bridge Chipset
>>> and
>> check with manual. Then enter setup and turn on AHCI, reboot
>>> and load F8 for instance ( or just resque disk with 2.6.21 kernel)
>>> to make sure Linux kernel loads AHCI driver to detect SATA HDD
>>> Kernel 2.6.18 and above does detect AHCI mode on Intel's ICH(7,8,9)R,
>>> but not ICH(6,7,8.9) per Intel Storage Matrix this ones don't support
>>> AHCI.
>>> *********************************************************************
>>>
>>> 00:1f.2 SATA controller: Intel Corporation 6 port SATA AHCI Controller
>> (rev
>>> 02)
>>>
>>> It is my Xen test server and has been running gentoo linux with both
>>> vanilla kernel 2.6.27 (no xen) and 2.6.27+opensuse xen dom0 patches, I
>>> wanted to start my pv_ops dom0 testing with a machine that I know can
>>> run Xen successfully.
>>>
>>> The HD is a Toshiba 2.5" drive as that is all I had to hand when I
>>> installed Gentoo Linux onto this machine,
>> do you think its worth
>>> swapping that for a 3.5"? I've got a raptor lying around
>> somwhere...
>>>
>>> Andy
>>>
>>>
>>>
>>>>
>>>> Cheers,
>>>> Todd
>>>>
>>>> --
>>>> Todd Deshane
>>>> http://todddeshane.net
>>>> http://runningxen.com
>>>>
>>>
>>> _______________________________________________
>>> Xen-devel mailing list
>>> Xen-devel@xxxxxxxxxxxxxxxxxxx
>>> http://lists.xensource.com/xen-devel
>>>
>>>
>>>
>>>
>>
>> --
>> Sent from my mobile device
>>
>>
>
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home