|   | 
      | 
  
  
      | 
      | 
  
 
     | 
    | 
  
  
     | 
    | 
  
  
    |   | 
      | 
  
  
    | 
         
xen-devel
Re: [Xen-devel] Will Xen support PCI add-on card for serial ports?
 
Keir,
  I tried your method with my serial port PCI card and I got the Xen output from it. But the Dom0 hangs later. Is there anyway to debug it?
   14 serial --unit=0 --speed=115200 --word=8 --parity=no --stop=1 
 15 terminal --timeout=50 serial console
   21 title Xen 3.3 VT-d (unstable)  22     root (hd0,0)  23     kernel /xen-3.3.gz iommu=0 com1=115200,8n1,0x1070,11 console=com1,vga  24     module /vmlinuz-2.6.18.8-xen ro 
 25     module /initrd-2.6.18.8-xen.img
  04:00.0 Serial controller: NetMos Technology PCI 9835 Multi-I/O Controller (rev 01) (prog-if 02 [16550])         Subsystem: LSI Logic / Symbios Logic 2S (16C550 UART)         Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- 
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-         Interrupt: pin A routed to IRQ 11         Region 0: I/O ports at 1070 [size=8]         Region 1: I/O ports at 1068 [size=8] 
        Region 2: I/O ports at 1060 [size=8]         Region 3: I/O ports at 1058 [size=8]         Region 4: I/O ports at 1050 [size=8]         Region 5: I/O ports at 1040 [size=16]
  Thanks, Neo
 
 
On Mon, Jul 14, 2008 at 12:10 AM, Keir Fraser < keir.fraser@xxxxxxxxxxxxx> wrote: 
On 13/7/08 01:57, "Neo Jia" < neojia@xxxxxxxxx> wrote:
 
> Thanks a lot! Could you give an Xen command line example?
  com1=115200,8n1,0xc00,5 console=com1 
 
...would set up console output at 115200 baud, 8 data bits, no parity, 1 
stop bit. The I/O-port base for the UART has been determined to be 0xc00, 
and the UART interrupts on IRQ line 5. 
 
> BTW, do you know which PCI card can be supported by Xen? 
 
 No, I only have experience (and even that only a little) with unbranded 
generic PCI serial cards. 
 
 -- Keir 
 
 
 
 
  --  I would remember that if researchers were not ambitious  probably today we haven't the technology we are using!  
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
 
 |   
 
| <Prev in Thread] | 
Current Thread | 
[Next in Thread>
 |  
- [Xen-devel] Will Xen support PCI add-on card for serial ports?, Neo Jia
- Re: [Xen-devel] Will Xen support PCI add-on card for serial ports?, Keir Fraser
- Re: [Xen-devel] Will Xen support PCI add-on card for serial ports?, Neo Jia
- Re: [Xen-devel] Will Xen support PCI add-on card for serial ports?, Keir Fraser
 - Re: [Xen-devel] Will Xen support PCI add-on card for serial ports?,
Neo Jia <=
 - Re: [Xen-devel] Will Xen support PCI add-on card for serial ports?, Keir Fraser
 - Re: [Xen-devel] Will Xen support PCI add-on card for serial ports?, Neo Jia
 - RE: [Xen-devel] Will Xen support PCI add-on card for serial ports?, Xin, Xiaohui
 - Re: [Xen-devel] Will Xen support PCI add-on card for serial ports?, Neo Jia
 - RE: [Xen-devel] Will Xen support PCI add-on card for serial ports?, Xin, Xiaohui
 - Re: [Xen-devel] Will Xen support PCI add-on card for serial ports?, Keir Fraser
 
  
  
  
 
 |  
  
 | 
    | 
  
  
    |   | 
    |