RE: [Filtered!] [Xen-devel] Networking problems with xen3

To:	"Jody Belka" <lists-xen@xxxxxxxx>, <xen-devel@xxxxxxxxxxxxxxxxxxx>
Subject:	RE: [Filtered!] [Xen-devel] Networking problems with xen3
From:	"Ian Pratt" <m+Ian.Pratt@xxxxxxxxxxxx>
Date:	Sun, 6 Nov 2005 22:57:25 -0000
Delivery-date:	Sun, 06 Nov 2005 22:57:44 +0000
Envelope-to:	www-data@xxxxxxxxxxxxxxxxxxx
List-help:	<mailto:xen-devel-request@lists.xensource.com?subject=help>
List-id:	Xen developer discussion <xen-devel.lists.xensource.com>
List-post:	<mailto:xen-devel@lists.xensource.com>
List-subscribe:	<http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-devel>, <mailto:xen-devel-request@lists.xensource.com?subject=subscribe>
List-unsubscribe:	<http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-devel>, <mailto:xen-devel-request@lists.xensource.com?subject=unsubscribe>
Sender:	xen-devel-bounces@xxxxxxxxxxxxxxxxxxx
Thread-index:	AcXjJDobH3qohx1sSh6zBDrFEHCZ2QAAPPVw
Thread-topic:	[Filtered!] [Xen-devel] Networking problems with xen3

 > On Sun, Nov 06, 2005 at 10:19:46PM -0000, Ian Pratt wrote:
> > This rules out a driver issue, so its almost certainly an interrupt 
> > routing issue -- this is done quite differently under xen3.
> > 
> > You could try some of the options to disable ACPI on the 
> xen command 
> > line...
> 
> Ok, adding either noapic or acpi=noirq, both of which appear 
> to result in the ioapic being ignored, results in everything 
> working fine. So i guess there's been drift between 2.6.12 
> native and the xen3/2.6.12-xen combo in this area.

OK, that's actually quite interesting. 

Please could you post a diff of the log meesages from a native boot
(with a similar config) vs on xen. Also, having the xen boot messages
woul be goo too.

Ian 

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel

WARNING - OLD ARCHIVES

xen-devel

RE: [Filtered!] [Xen-devel] Networking problems with xen3