WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-devel

[Xen-devel] Re: Booting Xen/ia64

I tried to build again, freshly from ftp, and this is how far it booted:

Loading.: Scientific Linux CERN                                     
Starting: Scientific Linux CERN

ELILO boot: Loading xen...Loading Linux... ..done
Loading initrd xenlinux...done
Linux version 2.6.9 (root@oplapro05) (gcc version 3.2.3 20030502 (Red Hat Linux 
3.2.3-42)) #1 SMP Mon Jan 17 10:03:22
EFI v1.00 by Xen/ia64: SALsystab=0x8000178 ACPI 2.0=0x3fb2e000 
SMBIOS=0x3fb3a000 HCDP=0x3fb2c000
warning: unable to switch EFI into virtual mode (status=9223372036854775811)
No I/O port range found in EFI memory map, falling back to AR.KR0
I/O port base = 0x0
SAL 0.1: Xen/ia64 Xen/ia64 version 0.0
get_max_cacheline_size: ia64_pal_cache_summary() failed (status=-1)
PAL_VM_PAGE_SIZE failed with status=-1;defaulting to architected purge 
page-sizes.
cpu_init: PAL VM summary failed, assuming 18 RID bits
ACPI: Local APIC address c0000000fee00000
GSI 36 (level, low) -> CPU 0 (0x0000) vector 48
2 CPUs available, 2 CPUs total
PCDPt 0xe00000003fb2c000
GSI 82 (level, low) -> CPU 0 (0x0000) vector 49
PCDP: serial console at MMIO 0xf8030000 (ttyS0, options 9
Built 1 zonelists
Kernel command line: BOOT_IMAGE=scsi0:EFI\redhat\xen  nomca console=ttyS0 
console=tty0 root=/dev/sda2 ro
P table entries: 1024 (order: 10, 32768 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 5, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 4, 262144 bytes)
Memory: 508288k/523264k available (6786k code, 14592rved, 3278k data, 208k init)
McKinley Errata 9 workaround not needed; disabling it
Mount-cache hash table entries: 1024 (order 0, 16384 bytes)
Boot processor id 0x0/0x0
task migration cache decay timeout: 10 msecs.

************* SYSTEM ALERT **************
SYSTEM NAME: moplapro05

17 Jan 2005 10:21:59
Alert Level 3: Warning
Keyword: BOOT_SLAVE_NO_FINAL_WAKEUP_VECTOR
Slave wakeup before vector registered
Logged by: System Firmware  1
Data: Implementation dependent data field
0x7680005B01E01F50 0000000000000001

A: ack read of this entry - X: Disable all future alert messages
Anything else skip redisplay the log entry
->Choice:Timeout!
*****************************************


Your *.good binaries still boot fine, and we're using the same gcc version:

>gcc --version
gcc (GCC) 3.2.3 20030502 (Red Hat Linux 3.2.3-42)


Håvard

On Fri, Jan 14, 2005 at 11:21:27AM -0800, Magenheimer, Dan (HP Labs Fort 
Collins) wrote:
> Just wanted to let you know I am still working on your problem.
> (I was tied up with other commitments most of yesterday.)
> 
> Just to verify, I rebuilt everything from the ftp site to ensure
> I had the same xen/xenlinux bits as you and was able to successfully
> boot and run.  I'm wondering if we might be seeing compiler
> or hardware differences?  Now that you have serial port output,
> could you rebuild from the ftp bits and let me know if you
> are still having problems.  And if you still have problems,
> could you send me the serial output (as you did below).
> 
> Regarding the output below, after studying it a bit, I realize
> it is a result of an unprivified xenlinux. 
> 
> > -----Original Message-----
> > From: Håvard Bjerke [mailto:havarbj@xxxxxxxxxxx] 
> > Sent: Wednesday, January 12, 2005 9:53 AM
> > To: Magenheimer, Dan (HP Labs Fort Collins)
> > Cc: xen-devel@xxxxxxxxxxxxxxxxxxxxx
> > Subject: Re: Booting Xen/ia64
> > 
> > On Wed, Jan 12, 2005 at 07:30:49AM -0600, 
> > dan.magenheimer@xxxxxx wrote:
> > > Did you try your binaries with the changed serial?  If so,
> > > how far did it get?  (no output or did a few messages get printed)
> > 
> > This is how far it gets when using my own built xen and your 
> > xenlinux.good binary:
> > 
> > (XEN) domain mem: type=40631872, attr=0x10000008000761, 
> > range=[0xfffc00000a6bfc30-0xfffc0000126bfc30) (128MB)
> > (XEN) About to call init_trace_bufs()
> > (XEN) get_time_delta: called, not implemented
> > (XEN) About to call startup_cpu_idle_loop()
> > (XEN) get_time_delta: called, not implemented
> > (XEN) update_dom_time: called, not implemented, skipping
> > (XEN) current=fffc0000026b8000,shared_info=fffc00003f59c000
> > (XEN) next=fffc000004074000,shared_info=0
> > (XEN) schedule_tail: change to rr7 not yet implemented
> > (XEN) vcpu_get_lid: WARNING: Getting cr.lid always returns zero
> > (XEN) vcpu_get_lid: WARNING: Getting cr.lid always returns zero
> > (XEN) **** vcpu_set_itv(65536): vitm=0, setting to 0
> > (XEN) vcpu_get_lid: WARNING: Getting cr.lid always returns zero
> > (XEN) vcpu_get_lid: WARNING: Getting cr.lid always returns zero
> > (XEN) vcpu_get_lid: WARNING: Getting cr.lid always returns zero
> > (XEN) *** CALLED SAL_SET_VECTORS.  IGNORED...
> > (XEN) vcpu_enable_timer(1000000): interval set to 69882928 cycles
> > Linux version 2.6.9 (djm@sportsman) (gcc version 3.2.3 
> > 20030502 (Red Hat Linux 3.2.3-34)) #1 SMP Tue Dec 7 21:25:04 MST 2004
> > EFI v1.00 by Xen/ia64: SALsystab=0x8000178 ACPI 
> > 2.0=0x3fb2e000 SMBIOS=0x3fb3a000 HCDP=0x3fb2c000
> > warning: unable to switch EFI into virtual mode 
> > (status=9223372036854775811)
> > No I/O port range found in EFI memory map, falling back to AR.KR0
> > I/O port base = 0x3fffffc000000
> > SAL 0.1: Xen/ia64 Xen/ia64 version 0.0
> > get_max_cacheline_size: ia64_pal_cache_summary() failed (status=-1)
> > PAL_VM_PAGE_SIZE failed with status=-1;defaulting to 
> > architected purge page-sizes.
> > cpu_init: PAL VM summary failed, assuming 18 RID bits
> > ACPI: Local APIC address c0000000fee00000
> > GSI 36 (level, low) -> CPU 0 (0x0000) vector 48
> > 2 CPUs available, 2 CPUs total
> > PCDP: v0 at 0xe00000003fb2c000
> > GSI 34 (edge, high) -> CPU 0 (0x0000) vector 49
> > PCDP: serial console at MMIO 0xff5e0000 (ttyS0, options 9600n8)
> > Built 1 zonelists
> > Kernel command line: BOOT_IMAGE=scsi0:EFI\redhat\xen  nomca 
> > console=ttyS0 console=tty0 root=/dev/sda2 ro
> > PID hash table entries: 2048 (order: 11, 65536 bytes)
> > Console: colour VGA+ 80x25
> > (XEN) Delivering first extint to domain: 
> > ifa=0000000000000000, isr=0000020000000000, 
> > itir=0000000000000000, iip=a0000001007c0cf0
> > (XEN) psr.ic off, delivering 
> > fault=5300,iip=a000000100003040,isr=00000a0400000000,PSCB.iip=
> > a0000001007c0cf0
> > 
> > 

-- 
Håvard K. F. Bjerke
http://www.idi.ntnu.no/~havarbj/


-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/xen-devel

<Prev in Thread] Current Thread [Next in Thread>