| |
|
 |
|
 |
|
|
|
| |
|
|
xen-devel
Re: [Xen-devel] question about network setting for domain1
Yes. It eventually works for me after I put 141.213.10.1 as the gateway
in the dom1 configuration file. Thanks a lot for your help.
Xin
On Wed, 15 Sep 2004, Keir Fraser wrote:
> > Thanks for your help.
> >
> > I followed your instructions and removed all ifcfg-ethX files in dom1.
> > Unfortunately, this does not solve the proble. There must have some other
> > problems.
> >
> > As I said before, my gateway of dom0 is 141.213.10.1. Shall I put it in
> > configuration file of dom1 as the gateway of dom1? If so, the ip addr of
> > dom1 is set to 192.168.0.188, how can it reach the gateway? I am a little
> > bit confused.
>
> Yes, I think so! Your gateway needs to be in the same subnet as dom1.
>
> I suggest setting the gateway for dom1 to be 192.168.0.1. Then add
> that address to your public interface in dom0 (i.e., the one whose
> primary address is 141.213.10.1) as an 'IP alias'.
>
> A common way of doing this is (assuming your public interface is
> eth0):
> ifconfig eth0:1 192.168.0.188 up
> You may also need to add eth0:1 to the bridge in dom0, but probably not.
>
> -- Keir
>
-------------------------------------------------------
This SF.Net email is sponsored by: thawte's Crypto Challenge Vl
Crack the code and win a Sony DCRHC40 MiniDV Digital Handycam
Camcorder. More prizes in the weekly Lunch Hour Challenge.
Sign up NOW http://ad.doubleclick.net/clk;10740251;10262165;m
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/xen-devel
|
|
|
| |
|
Home