[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] Debian Etch: Error: Device 0 (vif) could not be connected. Hotplug scripts not working.


  • To: "Dan Goscomb" <dgoscomb@xxxxxxxxxxxxx>
  • From: "trilok nuwal" <tc.nuwal@xxxxxxxxx>
  • Date: Fri, 24 Aug 2007 19:54:21 +0530
  • Cc: xen-users@xxxxxxxxxxxxxxxxxxx
  • Delivery-date: Fri, 24 Aug 2007 07:24:59 -0700
  • Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=beta; h=received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:references; b=dFXCwRGQ3Ax54QqdKItKAksYsA2DawzbuUIJiYbb3gopitpEfXlM6yXrXy3wHluNnIsusSQD326J1iULh54fpOeOyeFc0jy7PfwmPCPchElahBWjLlYJtYx0S0U0fjoZ4JdX0CuobMuT+nNlg7J09BBEygYDF8KCSdVjlQ7Lu60=
  • List-id: Xen user discussion <xen-users.lists.xensource.com>


you shoud put in yr config file then try.

vif  = [ 'bridge=xenbr2' ]



On 8/24/07, Dan Goscomb <dgoscomb@xxxxxxxxxxxxx> wrote:
Hi

The bridges work for some DomU... as I said... the bridge is
automatically created:

vps2:~# brctl show
bridge name     bridge id               STP enabled     interfaces
xenbr2          8000.feffffffffff       no              vif0.2
                                                        peth2
                                                        vif15.0
                                                        vif2.0
                                                        vif4.0
                                                        vif11.0
                                                        vif6.0
                                                         vif13.0
                                                        vif14.0


Config file of one of the DomU:

kernel  = '/boot/vmlinuz-2.6.18-4-xen-amd64'
ramdisk = '/boot/initrd.img-2.6.18-4-xen-amd64 '
memory  = '128'
root    = '/dev/sda1 ro'
disk    = [ 'phy:vg0/domu-disk,sda1,w', 'phy:vg0/domu-swap,sda2,w' ]
name    = 'domu'
vif  = [ 'ip=<IP_ADDRESS>' ]
>on_reboot   = 'restart'
on_crash    = 'restart'


Cheers

Dan


On Fri, 2007-08-24 at 19:45 +0530, trilok nuwal wrote:
> better post the config file as well as #ifconfig output in dom0.
>
> On 8/24/07, trilok nuwal <tc.nuwal@xxxxxxxxx > wrote:
>         Did you created bridges in dom0 whtever u r exporting to domU.
>
>
>
>
>         On 8/24/07, Dan Goscomb <dgoscomb@xxxxxxxxxxxxx> wrote:
>                 Hi All
>
>                 We have an issue whereby after X number (where X can
>                 change) DomU are
>                 booted, subsequent ones fail with the error message in
>                 the title.
>
>                 Is this a known issue? I have been unable to work out
>                 why that error
>                 message is appearing...
>
>                 Any hints would be appreciated!
>
>                 Cheers
>
>                 Dan
>
>
>                 _______________________________________________
>                 Xen-users mailing list
>                 Xen-users@xxxxxxxxxxxxxxxxxxx
>                 http://lists.xensource.com/xen-users
>
>
>


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.