[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [PATCH v7 2/8] vpci: Refactor REGISTER_VPCI_INIT
On 2025/7/21 22:37, Roger Pau Monné wrote: > On Fri, Jul 04, 2025 at 03:07:57PM +0800, Jiqian Chen wrote: >> Refactor REGISTER_VPCI_INIT to contain more capability specific >> information, this will benefit further follow-on changes to hide >> capability when initialization fails. >> >> What's more, change the definition of init_header() since it is >> not a capability and it is needed for all devices' PCI config space. >> >> After refactor, the "priority" of initializing capabilities isn't >> needed anymore, so delete its related codes. >> >> Note: >> Call vpci_make_msix_hole() in the end of init_msix() since the change >> of sequence of init_header() and init_msix(). And delete the call of >> vpci_make_msix_hole() in modify_decoding() since it is not needed. >> >> The cleanup hook is also added in this change, even if it's still >> unused. Further changes will make use of it. >> >> Signed-off-by: Jiqian Chen <Jiqian.Chen@xxxxxxx> >> --- >> There is a byte alignment problem in the array __start_vpci_array, which can >> be solved after >> "[PATCH] x86: don't have gcc over-align data" is merged. >> --- >> cc: "Roger Pau Monné" <roger.pau@xxxxxxxxxx> >> cc: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> >> cc: Anthony PERARD <anthony.perard@xxxxxxxxxx> >> cc: Michal Orzel <michal.orzel@xxxxxxx> >> cc: Jan Beulich <jbeulich@xxxxxxxx> >> cc: Julien Grall <julien@xxxxxxx> >> cc: Stefano Stabellini <sstabellini@xxxxxxxxxx> >> --- >> v6->v7 changes: >> * Change the pointer parameter of cleanup hook of vpci_capability_t to be >> const. >> If change parameter of init hook to be const will affect init_msix, and it >> assigns pdev >> to struct vpci_msix, so keep no const to expanding the impact. >> * Delete the vpci_make_msix_hole() call in modify_decoding(). >> * Change __start_vpci_array from vpci_capability_t* array to >> vpci_capability_t array. >> * Change the name "finit##_t" to be "name##_entry" and add a "name" >> parameter to macro >> REGISTER_VPCI_CAPABILITY. >> >> v5->v6 changes: >> * Rename REGISTER_PCI_CAPABILITY to REGISTER_VPCI_CAPABILITY. >> * Move vpci_capability_t entry from ".data.vpci" to ".data.rel.ro.vpci" and >> move the instances of VPCI_ARRAY in the linker scripts before >> *(.data.rel.ro). >> * Change _start/end_vpci_array[] to be const pointer array. >> >> v4->v5 changes: >> * Rename REGISTER_VPCI_CAP to REGISTER_PCI_CAPABILITY, rename >> REGISTER_VPCI_LEGACY_CAP to >> REGISTER_VPCI_CAP, rename REGISTER_VPCI_EXTENDED_CAP to >> REGISTER_VPCI_EXTCAP. >> * Change cleanup hook of vpci_capability_t from void to int. >> >> v3->v4 changes >> * Delete the useless trailing dot of section ".data.vpci". >> * Add description about priority since this patch removes the initializing >> priority of >> capabilities and priority is not needed anymore. >> * Change the hook name from fini to cleanup. >> * Change the name x and y to be finit and fclean. >> * Remove the unnecessary check "!capability->init" >> >> v2->v3 changes: >> * This is separated from patch "vpci: Hide capability when it fails to >> initialize" of v2. >> * Delete __maybe_unused attribute of "out" in function vpci_assign_devic(). >> * Rename REGISTER_VPCI_EXTEND_CAP to REGISTER_VPCI_EXTENDED_CAP. >> >> v1->v2 changes: >> * Removed the "priorities" of initializing capabilities since it isn't used >> anymore. >> * Added new function vpci_capability_mask() and vpci_ext_capability_mask() >> to remove >> failed capability from list. >> * Called vpci_make_msix_hole() in the end of init_msix(). >> >> Best regards, >> Jiqian Chen. >> --- >> xen/arch/arm/xen.lds.S | 3 +-- >> xen/arch/ppc/xen.lds.S | 3 +-- >> xen/arch/riscv/xen.lds.S | 3 +-- >> xen/arch/x86/xen.lds.S | 2 +- >> xen/drivers/vpci/header.c | 16 +------------- >> xen/drivers/vpci/msi.c | 2 +- >> xen/drivers/vpci/msix.c | 11 +++++++--- >> xen/drivers/vpci/rebar.c | 2 +- >> xen/drivers/vpci/vpci.c | 44 ++++++++++++++++++++++++++++++--------- >> xen/include/xen/vpci.h | 32 ++++++++++++++++++---------- >> xen/include/xen/xen.lds.h | 2 +- >> 11 files changed, 71 insertions(+), 49 deletions(-) >> >> diff --git a/xen/arch/arm/xen.lds.S b/xen/arch/arm/xen.lds.S >> index 5bfbe1e92c1e..9f30c3a13ed1 100644 >> --- a/xen/arch/arm/xen.lds.S >> +++ b/xen/arch/arm/xen.lds.S >> @@ -57,6 +57,7 @@ SECTIONS >> >> *(.rodata) >> *(.rodata.*) >> + VPCI_ARRAY >> *(.data.rel.ro) >> *(.data.rel.ro.*) >> >> @@ -64,8 +65,6 @@ SECTIONS >> __proc_info_start = .; >> *(.proc.info) >> __proc_info_end = .; >> - >> - VPCI_ARRAY >> } :text >> >> #if defined(BUILD_ID) >> diff --git a/xen/arch/ppc/xen.lds.S b/xen/arch/ppc/xen.lds.S >> index 1366e2819eed..1de0b77fc6b9 100644 >> --- a/xen/arch/ppc/xen.lds.S >> +++ b/xen/arch/ppc/xen.lds.S >> @@ -51,11 +51,10 @@ SECTIONS >> >> *(.rodata) >> *(.rodata.*) >> + VPCI_ARRAY >> *(.data.rel.ro) >> *(.data.rel.ro.*) >> >> - VPCI_ARRAY >> - >> . = ALIGN(POINTER_ALIGN); >> } :text >> >> diff --git a/xen/arch/riscv/xen.lds.S b/xen/arch/riscv/xen.lds.S >> index 8c3c06de01f6..edcadff90bfe 100644 >> --- a/xen/arch/riscv/xen.lds.S >> +++ b/xen/arch/riscv/xen.lds.S >> @@ -46,11 +46,10 @@ SECTIONS >> >> *(.rodata) >> *(.rodata.*) >> + VPCI_ARRAY >> *(.data.rel.ro) >> *(.data.rel.ro.*) >> >> - VPCI_ARRAY >> - >> . = ALIGN(POINTER_ALIGN); >> } :text >> >> diff --git a/xen/arch/x86/xen.lds.S b/xen/arch/x86/xen.lds.S >> index 636c7768aa3c..8e9cac75b09e 100644 >> --- a/xen/arch/x86/xen.lds.S >> +++ b/xen/arch/x86/xen.lds.S >> @@ -135,6 +135,7 @@ SECTIONS >> >> *(.rodata) >> *(.rodata.*) >> + VPCI_ARRAY >> *(.data.rel.ro) >> *(.data.rel.ro.*) >> >> @@ -148,7 +149,6 @@ SECTIONS >> *(.note.gnu.build-id) >> __note_gnu_build_id_end = .; >> #endif >> - VPCI_ARRAY >> } PHDR(text) >> >> #if defined(CONFIG_PVH_GUEST) && !defined(EFI) >> diff --git a/xen/drivers/vpci/header.c b/xen/drivers/vpci/header.c >> index 8ee8052cd4a3..069253b5f721 100644 >> --- a/xen/drivers/vpci/header.c >> +++ b/xen/drivers/vpci/header.c >> @@ -122,19 +122,6 @@ static void modify_decoding(const struct pci_dev *pdev, >> uint16_t cmd, >> bool map = cmd & PCI_COMMAND_MEMORY; >> unsigned int i; >> >> - /* >> - * Make sure there are no mappings in the MSIX MMIO areas, so that >> accesses >> - * can be trapped (and emulated) by Xen when the memory decoding bit is >> - * enabled. >> - * >> - * FIXME: punching holes after the p2m has been set up might be racy for >> - * DomU usage, needs to be revisited. >> - */ >> -#ifdef CONFIG_HAS_PCI_MSI >> - if ( map && !rom_only && vpci_make_msix_hole(pdev) ) >> - return; >> -#endif > > I think you need to keep this. What about BARs being repositioned by > dom0 over reserved region(s), and thus needing the MSI-X hole to be > craved out there? It's not a common use-case, but we should support > dom0 moving BARs around. > > I think you need both the added chunk in init_msix(), plus the code > above to not regress the current functionality. OK, will do. As Jan required me to add some comment to describe the chunk in init_msix() if not to delete here. Do you think below is appropriate? /* * To make sure there's a hole for the MSIX table/PBA in the p2m since * init_msix is called after init_header. Here and the calling in another * place are not redundant, another is to support dom0 moving BARs. */ spin_lock(&pdev->vpci->lock); rc = vpci_make_msix_hole(pdev); spin_unlock(&pdev->vpci->lock); return rc; } REGISTER_VPCI_CAP(MSIX, init_msix, cleanup_msix); > >> for ( i = 0; i < ARRAY_SIZE(header->bars); i++ ) >> { >> struct vpci_bar *bar = &header->bars[i]; >> @@ -869,7 +856,7 @@ static int vpci_init_ext_capability_list(const struct >> pci_dev *pdev) >> return 0; >> } >> >> -static int cf_check init_header(struct pci_dev *pdev) >> +int vpci_init_header(struct pci_dev *pdev) >> { >> uint16_t cmd; >> uint64_t addr, size; >> @@ -1065,7 +1052,6 @@ static int cf_check init_header(struct pci_dev *pdev) >> pci_conf_write16(pdev->sbdf, PCI_COMMAND, cmd); >> return rc; >> } >> -REGISTER_VPCI_INIT(init_header, VPCI_PRIORITY_MIDDLE); >> >> /* >> * Local variables: >> diff --git a/xen/drivers/vpci/msi.c b/xen/drivers/vpci/msi.c >> index 66e5a8a116be..c3eba4e14870 100644 >> --- a/xen/drivers/vpci/msi.c >> +++ b/xen/drivers/vpci/msi.c >> @@ -270,7 +270,7 @@ static int cf_check init_msi(struct pci_dev *pdev) >> >> return 0; >> } >> -REGISTER_VPCI_INIT(init_msi, VPCI_PRIORITY_LOW); >> +REGISTER_VPCI_CAP(MSI, init_msi, NULL); >> >> void vpci_dump_msi(void) >> { >> diff --git a/xen/drivers/vpci/msix.c b/xen/drivers/vpci/msix.c >> index 74211301ba10..a1692b9d9f6a 100644 >> --- a/xen/drivers/vpci/msix.c >> +++ b/xen/drivers/vpci/msix.c >> @@ -589,7 +589,8 @@ static const struct hvm_mmio_ops vpci_msix_table_ops = { >> .write = msix_write, >> }; >> >> -int vpci_make_msix_hole(const struct pci_dev *pdev) >> +/* Make sure there's a hole in the p2m for the MSIX mmio areas. */ >> +static int vpci_make_msix_hole(const struct pci_dev *pdev) >> { >> struct domain *d = pdev->domain; >> unsigned int i; >> @@ -703,9 +704,13 @@ static int cf_check init_msix(struct pci_dev *pdev) >> pdev->vpci->msix = msix; >> list_add(&msix->next, &d->arch.hvm.msix_tables); >> >> - return 0; >> + spin_lock(&pdev->vpci->lock); >> + rc = vpci_make_msix_hole(pdev); >> + spin_unlock(&pdev->vpci->lock); >> + >> + return rc; >> } >> -REGISTER_VPCI_INIT(init_msix, VPCI_PRIORITY_HIGH); >> +REGISTER_VPCI_CAP(MSIX, init_msix, NULL); >> >> /* >> * Local variables: >> diff --git a/xen/drivers/vpci/rebar.c b/xen/drivers/vpci/rebar.c >> index 793937449af7..3c18792d9bcd 100644 >> --- a/xen/drivers/vpci/rebar.c >> +++ b/xen/drivers/vpci/rebar.c >> @@ -118,7 +118,7 @@ static int cf_check init_rebar(struct pci_dev *pdev) >> >> return 0; >> } >> -REGISTER_VPCI_INIT(init_rebar, VPCI_PRIORITY_LOW); >> +REGISTER_VPCI_EXTCAP(REBAR, init_rebar, NULL); >> >> /* >> * Local variables: >> diff --git a/xen/drivers/vpci/vpci.c b/xen/drivers/vpci/vpci.c >> index 8474c0e3b995..e7e5b64f1be4 100644 >> --- a/xen/drivers/vpci/vpci.c >> +++ b/xen/drivers/vpci/vpci.c >> @@ -36,8 +36,8 @@ struct vpci_register { >> }; >> >> #ifdef __XEN__ >> -extern vpci_register_init_t *const __start_vpci_array[]; >> -extern vpci_register_init_t *const __end_vpci_array[]; >> +extern const vpci_capability_t __start_vpci_array[]; >> +extern const vpci_capability_t __end_vpci_array[]; >> #define NUM_VPCI_INIT (__end_vpci_array - __start_vpci_array) >> >> #ifdef CONFIG_HAS_VPCI_GUEST_SUPPORT >> @@ -83,6 +83,32 @@ static int assign_virtual_sbdf(struct pci_dev *pdev) >> >> #endif /* CONFIG_HAS_VPCI_GUEST_SUPPORT */ >> >> +static int vpci_init_capabilities(struct pci_dev *pdev) >> +{ >> + for ( unsigned int i = 0; i < NUM_VPCI_INIT; i++ ) >> + { >> + const vpci_capability_t *capability = &__start_vpci_array[i]; >> + const unsigned int cap = capability->id; >> + const bool is_ext = capability->is_ext; >> + unsigned int pos = 0; >> + int rc; >> + >> + if ( !is_ext ) >> + pos = pci_find_cap_offset(pdev->sbdf, cap); >> + else if ( is_hardware_domain(pdev->domain) ) >> + pos = pci_find_ext_capability(pdev->sbdf, cap); >> + >> + if ( !pos ) >> + continue; >> + >> + rc = capability->init(pdev); >> + if ( rc ) >> + return rc; >> + } >> + >> + return 0; >> +} >> + >> void vpci_deassign_device(struct pci_dev *pdev) >> { >> unsigned int i; >> @@ -128,7 +154,6 @@ void vpci_deassign_device(struct pci_dev *pdev) >> >> int vpci_assign_device(struct pci_dev *pdev) >> { >> - unsigned int i; >> const unsigned long *ro_map; >> int rc = 0; >> >> @@ -159,14 +184,13 @@ int vpci_assign_device(struct pci_dev *pdev) >> goto out; >> #endif >> >> - for ( i = 0; i < NUM_VPCI_INIT; i++ ) >> - { >> - rc = __start_vpci_array[i](pdev); >> - if ( rc ) >> - break; >> - } >> + rc = vpci_init_header(pdev); >> + if ( rc ) >> + goto out; >> + >> + rc = vpci_init_capabilities(pdev); >> >> - out: __maybe_unused; >> + out: >> if ( rc ) >> vpci_deassign_device(pdev); >> >> diff --git a/xen/include/xen/vpci.h b/xen/include/xen/vpci.h >> index 61d16cc8b897..61287e5d2e12 100644 >> --- a/xen/include/xen/vpci.h >> +++ b/xen/include/xen/vpci.h >> @@ -13,11 +13,12 @@ typedef uint32_t vpci_read_t(const struct pci_dev *pdev, >> unsigned int reg, >> typedef void vpci_write_t(const struct pci_dev *pdev, unsigned int reg, >> uint32_t val, void *data); >> >> -typedef int vpci_register_init_t(struct pci_dev *dev); >> - >> -#define VPCI_PRIORITY_HIGH "1" >> -#define VPCI_PRIORITY_MIDDLE "5" >> -#define VPCI_PRIORITY_LOW "9" >> +typedef struct { >> + unsigned int id; >> + bool is_ext; >> + int (* init)(struct pci_dev *pdev); >> + int (* cleanup)(const struct pci_dev *pdev); >> +} vpci_capability_t; >> >> #define VPCI_ECAM_BDF(addr) (((addr) & 0x0ffff000) >> 12) >> >> @@ -29,9 +30,21 @@ typedef int vpci_register_init_t(struct pci_dev *dev); >> */ >> #define VPCI_MAX_VIRT_DEV (PCI_SLOT(~0) + 1) >> >> -#define REGISTER_VPCI_INIT(x, p) \ >> - static vpci_register_init_t *const x##_entry \ >> - __used_section(".data.vpci." p) = (x) >> +#define REGISTER_VPCI_CAPABILITY(cap, name, finit, fclean, ext) \ >> + static const vpci_capability_t name##_entry \ >> + __used_section(".data.rel.ro.vpci") = { \ >> + .id = (cap), \ >> + .init = (finit), \ >> + .cleanup = (fclean), \ >> + .is_ext = (ext), \ >> + } >> + >> +#define REGISTER_VPCI_CAP(name, finit, fclean) \ >> + REGISTER_VPCI_CAPABILITY(PCI_CAP_ID_##name, name, finit, fclean, false) >> +#define REGISTER_VPCI_EXTCAP(name, finit, fclean) \ >> + REGISTER_VPCI_CAPABILITY(PCI_EXT_CAP_ID_##name, name, finit, fclean, >> true) >> + >> +int __must_check vpci_init_header(struct pci_dev *pdev); >> >> /* Assign vPCI to device by adding handlers. */ >> int __must_check vpci_assign_device(struct pci_dev *pdev); >> @@ -206,9 +219,6 @@ struct vpci_vcpu { >> #ifdef __XEN__ >> void vpci_dump_msi(void); >> >> -/* Make sure there's a hole in the p2m for the MSIX mmio areas. */ >> -int vpci_make_msix_hole(const struct pci_dev *pdev); >> - >> /* Arch-specific vPCI MSI helpers. */ >> void vpci_msi_arch_mask(struct vpci_msi *msi, const struct pci_dev *pdev, >> unsigned int entry, bool mask); >> diff --git a/xen/include/xen/xen.lds.h b/xen/include/xen/xen.lds.h >> index 793d0e11450c..eb86305c11c7 100644 >> --- a/xen/include/xen/xen.lds.h >> +++ b/xen/include/xen/xen.lds.h >> @@ -188,7 +188,7 @@ >> #define VPCI_ARRAY \ >> . = ALIGN(POINTER_ALIGN); \ >> __start_vpci_array = .; \ >> - *(SORT(.data.vpci.*)) \ >> + *(.data.rel.ro.vpci) \ > > Indentation of the trailing '\' seems to be off? Will change. > > Thanks, Roger. -- Best regards, Jiqian Chen.
|
![]() |
Lists.xenproject.org is hosted with RackSpace, monitoring our |