Reserving virtual address space above 0xfec00000
Linux version 2.6.32.12-0.7.1.xs6.0.0.529.170661xen (geeko@buildhost) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Tue Aug 30 14:15:31 EDT 2011
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
Xen-provided machine memory map:
 BIOS: 0000000000000000 - 000000000009ec00 (usable)
 BIOS: 000000000009ec00 - 00000000000a0000 (reserved)
 BIOS: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS: 0000000000100000 - 0000000020000000 (usable)
 BIOS: 0000000020000000 - 0000000020200000 (reserved)
 BIOS: 0000000020200000 - 0000000040000000 (usable)
 BIOS: 0000000040000000 - 0000000040200000 (reserved)
 BIOS: 0000000040200000 - 000000007ad76000 (usable)
 BIOS: 000000007ad76000 - 000000007adc2000 (ACPI NVS)
 BIOS: 000000007adc2000 - 000000007adcb000 (ACPI data)
 BIOS: 000000007adcb000 - 000000007adf5000 (reserved)
 BIOS: 000000007adf5000 - 000000007adf6000 (usable)
 BIOS: 000000007adf6000 - 000000007ae06000 (reserved)
 BIOS: 000000007ae06000 - 000000007ae14000 (ACPI NVS)
 BIOS: 000000007ae14000 - 000000007ae3c000 (reserved)
 BIOS: 000000007ae3c000 - 000000007ae7f000 (ACPI NVS)
 BIOS: 000000007ae7f000 - 000000007b000000 (usable)
 BIOS: 000000007b800000 - 000000007fa00000 (reserved)
 BIOS: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS: 00000000fed1c000 - 00000000fed40000 (reserved)
 BIOS: 00000000ff000000 - 0000000100000000 (reserved)
 BIOS: 0000000100000000 - 000000047fe00000 (usable)
Xen-provided physical RAM map:
 Xen: 0000000000000000 - 000000002f800000 (usable)
DMI 2.7 present.
last_pfn = 0x2f800 max_arch_pfn = 0x10000000
initial memory mapped : 0 - 00000000
init_memory_mapping: 0000000000000000-000000002f800000
 0000000000 - 002f800000 page 4k
kernel direct mapping tables up to 2f800000 @ d68000-ee9000
RAMDISK: 005f5000 - 00c9b000
ACPI: RSDP 000f0450 00024 (v02 ALASKA)
ACPI: XSDT 7adc2070 0005C (v01 ALASKA    A M I 01072009 AMI  00010013)
ACPI: FACP 7adca158 000F4 (v04 ALASKA    A M I 01072009 AMI  00010013)
ACPI: DSDT 7adc2158 07FFB (v02 ALASKA    A M I 00000000 INTL 20051117)
ACPI: FACS 7ae0bf80 00040
ACPI: APIC 7adca250 00098 (v03 ALASKA    A M I 01072009 AMI  00010013)
ACPI: SSDT 7adca2e8 00106 (v01 AMICPU     PROC 00000001 MSFT 03000001)
ACPI: MCFG 7adca3f0 0003C (v01 ALASKA    A M I 01072009 MSFT 00000097)
ACPI: AAFT 7adca430 000D3 (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
ACPI: HPET 7adca508 00038 (v01 ALASKA    A M I 01072009 AMI. 00000004)
ACPI: XMAR 7adca540 000E8 (v01 ALASKA    A M I 00000001 INTL 00000001)
0MB HIGHMEM available.
760MB LOWMEM available.
  mapped low ram: 0 - 2f800000
  low ram: 0 - 2f800000
  node 0 low ram: 00000000 - 2f000000
  node 0 bootmap 00000000 - 00005e00
(5 early reservations) ==> bootmem [0000000000 - 002f000000]
  #0 [0000100000 - 00005d41d4]    TEXT DATA BSS ==> [0000100000 - 00005d41d4]
  #1 [00005f5000 - 0000d68000]     Xen provided ==> [00005f5000 - 0000d68000]
  #2 [00005d5000 - 00005d5160]              BRK ==> [00005d5000 - 00005d5160]
  #3 [0000d68000 - 0000ede000]          PGTABLE ==> [0000d68000 - 0000ede000]
  #4 [0000000000 - 0000006000]          BOOTMAP ==> [0000000000 - 0000006000]
found SMP MP-table at [febf8230] 000fd230
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  Normal   0x00001000 -> 0x0002f800
  HighMem  0x0002f800 -> 0x0002f800
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0002f000
    0: 0x0002f800 -> 0x0002f800
On node 0 totalpages: 192512
free_area_init_node: node 0, pgdat c04eb180, node_mem_map c1002000
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 1488 pages used for memmap
  Normal zone: 186928 pages, LIFO batch:31
ACPI: X2APIC (apic_id[0x00] uid[0x01] enabled)
ACPI: x2apic entry ignored
ACPI: X2APIC (apic_id[0x02] uid[0x02] enabled)
ACPI: x2apic entry ignored
ACPI: X2APIC (apic_id[0x04] uid[0x03] enabled)
ACPI: x2apic entry ignored
ACPI: X2APIC (apic_id[0x06] uid[0x04] enabled)
ACPI: x2apic entry ignored
ACPI: X2APIC_NMI (uid[0xffffffff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 7fa00000 (gap: 7fa00000:7f200000)
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 9 pages/cpu @c16b9000 s13720 r0 d23144 u65536
pcpu-alloc: s13720 r0 d23144 u65536 alloc=16*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Swapping MFNs for PFN 540 and 16bb (MFN 41540 and 440015)
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 190992
Kernel command line: root=LABEL=root-nryugfeg ro xencons=hvc console=hvc0 console=tty0 quiet vga=785 splash
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Software IO TLB enabled: 
 Aperture:     64 megabytes
 Address size: 28 bits
 Kernel range: c17b2000 - c57b2000
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Initializing HighMem for node 0 (00000000:00000000)
Memory: 682740k/778240k available (2585k kernel code, 87092k reserved, 1455k data, 316k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xfe877000 - 0xfebff000   (3616 kB)
    pkmap   : 0xfe400000 - 0xfe600000   (2048 kB)
    vmalloc : 0xf0000000 - 0xfe3fe000   ( 227 MB)
    lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
      .init : 0xc04f3000 - 0xc0542000   ( 316 kB)
      .data : 0xc0386787 - 0xc04f2578   (1455 kB)
      .text : 0xc0100000 - 0xc0386787   (2585 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Hierarchical RCU implementation.
NR_IRQS:2048
Extended CMOS year: 2000
Xen reported: 3292.632 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
console [hvc0] enabled
Calibrating delay using timer specific routine.. 6619.17 BogoMIPS (lpj=33095871)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 512
mce: CPU supports 9 MCE banks
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20090903
SMP alternatives: switching to SMP code
Initializing CPU#1
Initializing CPU#2
Brought up 4 CPUs
Initializing CPU#3
Grant table version 2
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: BIOS _OSI(Linux) query ignored
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:02.0: reg 10 64bit mmio: [0xfb400000-0xfb7fffff]
pci 0000:00:02.0: reg 18 64bit mmio pref: [0xb0000000-0xbfffffff]
pci 0000:00:02.0: reg 20 io port: [0xf000-0xf03f]
pci 0000:00:16.0: reg 10 64bit mmio: [0xfbe07000-0xfbe0700f]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:1a.0: reg 10 32bit mmio: [0xfbe06000-0xfbe063ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xfbe00000-0xfbe03fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: PME# disabled
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PME# disabled
pci 0000:00:1d.0: reg 10 32bit mmio: [0xfbe05000-0xfbe053ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0xf110-0xf117]
pci 0000:00:1f.2: reg 14 io port: [0xf100-0xf103]
pci 0000:00:1f.2: reg 18 io port: [0xf0f0-0xf0f7]
pci 0000:00:1f.2: reg 1c io port: [0xf0e0-0xf0e3]
pci 0000:00:1f.2: reg 20 io port: [0xf0d0-0xf0df]
pci 0000:00:1f.2: reg 24 io port: [0xf0c0-0xf0cf]
pci 0000:00:1f.3: reg 10 64bit mmio: [0xfbe04000-0xfbe040ff]
pci 0000:00:1f.3: reg 20 io port: [0xf040-0xf05f]
pci 0000:00:1f.5: reg 10 io port: [0xf0b0-0xf0b7]
pci 0000:00:1f.5: reg 14 io port: [0xf0a0-0xf0a3]
pci 0000:00:1f.5: reg 18 io port: [0xf090-0xf097]
pci 0000:00:1f.5: reg 1c io port: [0xf080-0xf083]
pci 0000:00:1f.5: reg 20 io port: [0xf070-0xf07f]
pci 0000:00:1f.5: reg 24 io port: [0xf060-0xf06f]
pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
pci 0000:01:00.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff]
pci 0000:01:00.0: reg 24 io port: [0xe000-0xe07f]
pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfb000000-0xfb01ffff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
pci 0000:00:01.0: bridge 32bit mmio: [0xf8000000-0xfb0fffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:03:00.0: reg 10 io port: [0xd040-0xd047]
pci 0000:03:00.0: reg 14 io port: [0xd030-0xd033]
pci 0000:03:00.0: reg 18 io port: [0xd020-0xd027]
pci 0000:03:00.0: reg 1c io port: [0xd010-0xd013]
pci 0000:03:00.0: reg 20 io port: [0xd000-0xd00f]
pci 0000:03:00.0: reg 24 32bit mmio: [0xfbd10000-0xfbd107ff]
pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfbd00000-0xfbd0ffff]
pci 0000:03:00.0: PME# supported from D3hot
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff]
pci 0000:00:1c.4: bridge 32bit mmio: [0xfbd00000-0xfbdfffff]
pci 0000:04:00.0: reg 10 64bit mmio: [0xfbc00000-0xfbc07fff]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5: bridge 32bit mmio: [0xfbc00000-0xfbcfffff]
pci 0000:05:00.0: reg 10 64bit mmio: [0xfbb00000-0xfbb07fff]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:00:1c.6: PCI bridge to [bus 05-05]
pci 0000:00:1c.6: bridge 32bit mmio: [0xfbb00000-0xfbbfffff]
pci 0000:06:00.0: reg 10 32bit mmio: [0xfba00000-0xfba1ffff]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:00:1c.7: PCI bridge to [bus 06-0f]
pci 0000:00:1c.7: bridge io port: [0xc000-0xcfff]
pci 0000:00:1c.7: bridge 32bit mmio: [0xfb800000-0xfbafffff]
pci 0000:00:1c.7: bridge 64bit mmio pref: [0xd0000000-0xd00fffff]
pci 0000:07:01.0: PME# supported from D0 D3hot D3cold
pci 0000:07:01.0: PME# disabled
pci 0000:07:04.0: PME# supported from D0 D3hot D3cold
pci 0000:07:04.0: PME# disabled
pci 0000:07:05.0: PME# supported from D0 D3hot D3cold
pci 0000:07:05.0: PME# disabled
pci 0000:07:06.0: PME# supported from D0 D3hot D3cold
pci 0000:07:06.0: PME# disabled
pci 0000:07:07.0: PME# supported from D0 D3hot D3cold
pci 0000:07:07.0: PME# disabled
pci 0000:07:08.0: PME# supported from D0 D3hot D3cold
pci 0000:07:08.0: PME# disabled
pci 0000:07:09.0: PME# supported from D0 D3hot D3cold
pci 0000:07:09.0: PME# disabled
pci 0000:06:00.0: PCI bridge to [bus 07-0f]
pci 0000:06:00.0: bridge io port: [0xc000-0xcfff]
pci 0000:06:00.0: bridge 32bit mmio: [0xfb800000-0xfb9fffff]
pci 0000:06:00.0: bridge 64bit mmio pref: [0xd0000000-0xd00fffff]
pci 0000:07:01.0: PCI bridge to [bus 08-08]
pci 0000:09:00.0: supports D1 D2
pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:00.0: PME# disabled
pci 0000:07:04.0: PCI bridge to [bus 09-0a]
pci 0000:09:00.0: PCI bridge to [bus 0a-0a]
pci 0000:0b:00.0: reg 10 64bit mmio: [0xfb900000-0xfb9007ff]
pci 0000:0b:00.0: reg 18 io port: [0xc000-0xc0ff]
pci 0000:0b:00.0: supports D2
pci 0000:0b:00.0: PME# supported from D2 D3hot D3cold
pci 0000:0b:00.0: PME# disabled
pci 0000:07:05.0: PCI bridge to [bus 0b-0b]
pci 0000:07:05.0: bridge io port: [0xc000-0xcfff]
pci 0000:07:05.0: bridge 32bit mmio: [0xfb900000-0xfb9fffff]
pci 0000:0c:00.0: reg 10 64bit mmio pref: [0xd0010000-0xd001ffff]
pci 0000:0c:00.0: reg 18 64bit mmio pref: [0xd0000000-0xd000ffff]
pci 0000:0c:00.0: reg 30 32bit mmio pref: [0xfb800000-0xfb8007ff]
pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0c:00.0: PME# disabled
pci 0000:07:06.0: PCI bridge to [bus 0c-0c]
pci 0000:07:06.0: bridge 32bit mmio: [0xfb800000-0xfb8fffff]
pci 0000:07:06.0: bridge 64bit mmio pref: [0xd0000000-0xd00fffff]
pci 0000:07:07.0: PCI bridge to [bus 0d-0d]
pci 0000:07:08.0: PCI bridge to [bus 0e-0e]
pci 0000:07:09.0: PCI bridge to [bus 0f-0f]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR21._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR21.BR31._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR21.BR34._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR21.BR34.BR22._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR21.BR35._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR21.BR36._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR21.BR37._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR21.BR38._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR21.BR39._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
xen_mem: Initialising balloon driver.
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
Switching to clocksource xen
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xfed10000-0xfed19fff has been reserved
system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
system 00:01: iomem range 0xfed90000-0xfed93fff has been reserved
system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:01: iomem range 0xfee00000-0xfee0ffff has been reserved
system 00:02: ioport range 0x290-0x29f has been reserved
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
system 00:0b: ioport range 0x400-0x453 has been reserved
system 00:0b: ioport range 0x458-0x47f has been reserved
system 00:0b: ioport range 0x1180-0x119f has been reserved
system 00:0b: ioport range 0x500-0x57f has been reserved
system 00:0b: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:0b: iomem range 0xfec00000-0xfecfffff could not be reserved
system 00:0b: iomem range 0xfed08000-0xfed08fff has been reserved
system 00:0b: iomem range 0xff000000-0xffffffff has been reserved
system 00:0c: ioport range 0x454-0x457 has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: 0xe000-0xefff
pci 0000:00:01.0:   MEM window: 0xf8000000-0xfb0fffff
pci 0000:00:01.0:   PREFETCH window: 0x000000c0000000-0x000000cfffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0:   IO window: disabled
pci 0000:00:1c.0:   MEM window: disabled
pci 0000:00:1c.0:   PREFETCH window: disabled
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.4:   IO window: 0xd000-0xdfff
pci 0000:00:1c.4:   MEM window: 0xfbd00000-0xfbdfffff
pci 0000:00:1c.4:   PREFETCH window: disabled
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.5:   IO window: disabled
pci 0000:00:1c.5:   MEM window: 0xfbc00000-0xfbcfffff
pci 0000:00:1c.5:   PREFETCH window: disabled
pci 0000:00:1c.6: PCI bridge, secondary bus 0000:05
pci 0000:00:1c.6:   IO window: disabled
pci 0000:00:1c.6:   MEM window: 0xfbb00000-0xfbbfffff
pci 0000:00:1c.6:   PREFETCH window: disabled
pci 0000:07:01.0: PCI bridge, secondary bus 0000:08
pci 0000:07:01.0:   IO window: disabled
pci 0000:07:01.0:   MEM window: disabled
pci 0000:07:01.0:   PREFETCH window: disabled
pci 0000:09:00.0: PCI bridge, secondary bus 0000:0a
pci 0000:09:00.0:   IO window: disabled
pci 0000:09:00.0:   MEM window: disabled
pci 0000:09:00.0:   PREFETCH window: disabled
pci 0000:07:04.0: PCI bridge, secondary bus 0000:09
pci 0000:07:04.0:   IO window: disabled
pci 0000:07:04.0:   MEM window: disabled
pci 0000:07:04.0:   PREFETCH window: disabled
pci 0000:07:05.0: PCI bridge, secondary bus 0000:0b
pci 0000:07:05.0:   IO window: 0xc000-0xcfff
pci 0000:07:05.0:   MEM window: 0xfb900000-0xfb9fffff
pci 0000:07:05.0:   PREFETCH window: disabled
pci 0000:07:06.0: PCI bridge, secondary bus 0000:0c
pci 0000:07:06.0:   IO window: disabled
pci 0000:07:06.0:   MEM window: 0xfb800000-0xfb8fffff
pci 0000:07:06.0:   PREFETCH window: 0x000000d0000000-0x000000d00fffff
pci 0000:07:07.0: PCI bridge, secondary bus 0000:0d
pci 0000:07:07.0:   IO window: disabled
pci 0000:07:07.0:   MEM window: disabled
pci 0000:07:07.0:   PREFETCH window: disabled
pci 0000:07:08.0: PCI bridge, secondary bus 0000:0e
pci 0000:07:08.0:   IO window: disabled
pci 0000:07:08.0:   MEM window: disabled
pci 0000:07:08.0:   PREFETCH window: disabled
pci 0000:07:09.0: PCI bridge, secondary bus 0000:0f
pci 0000:07:09.0:   IO window: disabled
pci 0000:07:09.0:   MEM window: disabled
pci 0000:07:09.0:   PREFETCH window: disabled
pci 0000:06:00.0: PCI bridge, secondary bus 0000:07
pci 0000:06:00.0:   IO window: 0xc000-0xcfff
pci 0000:06:00.0:   MEM window: 0xfb800000-0xfb9fffff
pci 0000:06:00.0:   PREFETCH window: 0x000000d0000000-0x000000d00fffff
pci 0000:00:1c.7: PCI bridge, secondary bus 0000:06
pci 0000:00:1c.7:   IO window: 0xc000-0xcfff
pci 0000:00:1c.7:   MEM window: 0xfb800000-0xfbafffff
pci 0000:00:1c.7:   PREFETCH window: 0x000000d0000000-0x000000d00fffff
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.6: setting latency timer to 64
pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.7: setting latency timer to 64
pci 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:06:00.0: setting latency timer to 64
pci 0000:07:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:07:01.0: setting latency timer to 64
pci 0000:07:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:07:04.0: setting latency timer to 64
pci 0000:09:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:09:00.0: setting latency timer to 64
pci 0000:07:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:07:05.0: setting latency timer to 64
pci 0000:07:06.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:07:06.0: setting latency timer to 64
pci 0000:07:07.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:07:07.0: setting latency timer to 64
pci 0000:07:08.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:07:08.0: setting latency timer to 64
pci 0000:07:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:07:09.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io:  [0xe000-0xefff]
pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfb0fffff]
pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff]
pci_bus 0000:03: resource 0 io:  [0xd000-0xdfff]
pci_bus 0000:03: resource 1 mem: [0xfbd00000-0xfbdfffff]
pci_bus 0000:04: resource 1 mem: [0xfbc00000-0xfbcfffff]
pci_bus 0000:05: resource 1 mem: [0xfbb00000-0xfbbfffff]
pci_bus 0000:06: resource 0 io:  [0xc000-0xcfff]
pci_bus 0000:06: resource 1 mem: [0xfb800000-0xfbafffff]
pci_bus 0000:06: resource 2 pref mem [0xd0000000-0xd00fffff]
pci_bus 0000:07: resource 0 io:  [0xc000-0xcfff]
pci_bus 0000:07: resource 1 mem: [0xfb800000-0xfb9fffff]
pci_bus 0000:07: resource 2 pref mem [0xd0000000-0xd00fffff]
pci_bus 0000:0b: resource 0 io:  [0xc000-0xcfff]
pci_bus 0000:0b: resource 1 mem: [0xfb900000-0xfb9fffff]
pci_bus 0000:0c: resource 1 mem: [0xfb800000-0xfb8fffff]
pci_bus 0000:0c: resource 2 pref mem [0xd0000000-0xd00fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 6808k freed
MCE: bind virq for DOM0 logging
MCE_DOM0_LOG: enter dom0 mce vIRQ handler
MCE_DOM0_LOG: No more urgent data
MCE_DOM0_LOG: No more nonurgent data
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 379
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
vesafb: framebuffer at 0xf9000000, mapped to 0xf0080000, using 1200k, total 14336k
vesafb: mode is 640x480x16, linelength=1280, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
floppy0: Unable to grab DMA2 for the floppy driver
FDC 0 is a post-1991 82077
brd: module loaded
loop: module loaded
Xen virtual console successfully installed as hvc0
Event-channel device installed.
blktap_device_init: blktap device major 253
blktap_ring_init: blktap ring major: 253
netfront: Initialising virtual ethernet driver.
Uniform Multi-Platform E-IDE driver
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 17
registered taskstats version 1
PCI IO multiplexer device installed.
BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
Freeing unused kernel memory: 316k freed
input: AT Translated Set 2 keyboard as /class/input/input0
Console: switching to colour frame buffer device 80x30
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfbe06000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbe05000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf0d0 irq 14
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf0d8 irq 15
ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
usb 1-1: new high speed USB device using ehci_hcd and address 2
ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 19
ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 19
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high speed USB device using ehci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 2-1.7: new high speed USB device using ehci_hcd and address 3
ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
usb 2-1.7: configuration #1 chosen from 1 choice
ata1.00: ATA-7: ST3320620AS, 3.AAJ, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.01: ATAPI: ATAPI   iHAS424   Y, ZL1V, max UDMA/100
usb 2-1.8: new low speed USB device using ehci_hcd and address 4
ata1.00: configured for UDMA/133
ata1.01: configured for UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      ST3320620AS      3.AA PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
scsi 0:0:1:0: CD-ROM            ATAPI    iHAS424   Y      ZL1V PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:
usb 2-1.8: configuration #1 chosen from 1 choice
 sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.01: SATA link down (SStatus 4 SControl 0)
ata2.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
pata_acpi 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_acpi 0000:03:00.0: setting latency timer to 64
pata_acpi 0000:03:00.0: PCI INT A disabled
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
kjournald starting.  Commit interval 15 seconds
EXT3-fs: mounted filesystem with ordered data mode.
input: PC Speaker as /class/input/input1
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:1:0: Attached scsi CD-ROM sr0
input: Power Button as /class/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /class/input/input3
ACPI: Power Button [PWRF]
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 0:0:1:0: Attached scsi generic sg1 type 5
sd 1:0:0:0: Attached scsi generic sg2 type 0
No available Cx info for cpu 1
No available Cx info for cpu 2
No available Cx info for cpu 3
No available Cx info for cpu 4
tg3.c:v3.116j (January 21, 2011)

tg3 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
tg3 0000:0c:00.0: setting latency timer to 64
ohci1394 0000:0b:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci1394 0000:0b:00.0: setting latency timer to 64
pci 0000:07:06.0: eth0: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address 00:25:22:ce:62:bb
pci 0000:07:06.0: eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1])
pci 0000:07:06.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
pci 0000:07:06.0: eth0: dma_rwctrl[00000001] dma_mask[64-bit]
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16]  MMIO=[fb900000-fb9007ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
usbcore: registered new interface driver hiddev
input: USB Optical Mouse as /class/input/input4
generic-usb 0003:04B3:310C.0001: input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1.8/input0
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
usbcore: registered new interface driver libusual
Initializing USB Mass Storage driver...
scsi4 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
scsi 4:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
sd 4:0:0:0: Attached scsi generic sg3 type 0
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[008f1300e1420e00]
sd 4:0:0:0: [sdc] 7829504 512-byte logical blocks: (4.00 GB/3.73 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 03 00 00 00
sd 4:0:0:0: [sdc] Assuming drive cache: write through
usb-storage: device scan complete
sd 4:0:0:0: [sdc] Assuming drive cache: write through
 sdc: sdc1
sd 4:0:0:0: [sdc] Assuming drive cache: write through
sd 4:0:0:0: [sdc] Attached SCSI removable disk
Non-volatile memory driver v1.3
lp: driver loaded but no devices found
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
EXT3 FS on sda1, internal journal
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
Adding 524280k swap on /var/swap/swap.001.  Priority:-1 extents:140 across:557076k 
