[ 0.000000] Linux version 2.6.39-xen-next-2.6.39-konrad+ (root@serveerstertje) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP Fri May 20 18:03:40 CEST 2011 [ 0.000000] Command line: root=/dev/mapper/serveerstertje-root ro nomodeset vga=794 video=vesafb earlyprintk=xen max_loop=255 loop_max_part=63 acpi_enforce_resources=lax xen-pciback.hide=(03:06.0)(04:00.0)(04:00.1)(04:00.2)(04:00.3)(04:00.4)(04:00.5)(04:00.6)(04:00.7)(0a:00.0)(0a:00.1)(0a:00.2)(0a:00.3)(0a:00.4)(0a:00.5)(0a:00.6)(0a:00.7)(05:00.0)(05:00.1)(07:01.0)(07:01.1)(07:01.2) [ 0.000000] released 0 pages of unused memory [ 0.000000] 1-1 mapping on 9f->100 [ 0.000000] 1-1 mapping on aff90->100000 [ 0.000000] Set 327889 page(s) to 1-1 mapping. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] Xen: 000000000009f000 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 0000000030000000 (usable) [ 0.000000] Xen: 0000000030000000 - 00000000aff90000 (unusable) [ 0.000000] Xen: 00000000aff90000 - 00000000aff9e000 (ACPI data) [ 0.000000] Xen: 00000000aff9e000 - 00000000affe0000 (ACPI NVS) [ 0.000000] Xen: 00000000affe0000 - 00000000b0000000 (reserved) [ 0.000000] Xen: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] Xen: 00000000fec20000 - 00000000fec21000 (reserved) [ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] Xen: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] Xen: 0000000100000000 - 00000002b0000000 (usable) [ 0.000000] bootconsole [xenboot0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: MSI MS-7640/890FXA-GD70 (MS-7640) , BIOS V1.8B1 09/13/2010 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x2b0000 max_arch_pfn = 0x400000000 [ 0.000000] last_pfn = 0x30000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] initial memory mapped : 0 - 028b5000 [ 0.000000] Base memory trampoline at [ffff88000009d000] 9d000 size 8192 [ 0.000000] init_memory_mapping: 0000000000000000-0000000030000000 [ 0.000000] 0000000000 - 0030000000 page 4k [ 0.000000] kernel direct mapping tables up to 30000000 @ 2fe7e000-30000000 [ 0.000000] xen: setting RW the range 2ffe4000 - 30000000 [ 0.000000] init_memory_mapping: 0000000100000000-00000002b0000000 [ 0.000000] 0100000000 - 02b0000000 page 4k [ 0.000000] kernel direct mapping tables up to 2b0000000 @ 2e8f2000-2fe7e000 [ 0.000000] xen: setting RW the range 2f679000 - 2fe7e000 [ 0.000000] RAMDISK: 01eee000 - 028b5000 [ 0.000000] ACPI: RSDP 00000000000fb100 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000aff90000 00048 (v01 MSI OEMSLIC 20100913 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000aff90200 00084 (v01 7640MS A7640100 20100913 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000aff905e0 09427 (v01 A7640 A7640100 00000100 INTL 20051117) [ 0.000000] ACPI: FACS 00000000aff9e000 00040 [ 0.000000] ACPI: APIC 00000000aff90390 00088 (v01 7640MS A7640100 20100913 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000aff90420 0003C (v01 7640MS OEMMCFG 20100913 MSFT 00000097) [ 0.000000] ACPI: SLIC 00000000aff90460 00176 (v01 MSI OEMSLIC 20100913 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000aff9e040 00072 (v01 7640MS A7640100 20100913 MSFT 00000097) [ 0.000000] ACPI: SRAT 00000000aff9a5e0 00108 (v03 AMD FAM_F_10 00000002 AMD 00000001) [ 0.000000] ACPI: HPET 00000000aff9a6f0 00038 (v01 7640MS OEMHPET 20100913 MSFT 00000097) [ 0.000000] ACPI: IVRS 00000000aff9a730 00100 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.000000] ACPI: SSDT 00000000aff9a830 00DA4 (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x002b0000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00030000 [ 0.000000] 0: 0x00100000 -> 0x002b0000 [ 0.000000] On node 0 totalpages: 1965967 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 2 pages reserved [ 0.000000] DMA zone: 3925 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 178232 pages, LIFO batch:31 [ 0.000000] Normal zone: 24192 pages used for memmap [ 0.000000] Normal zone: 1745280 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] BIOS bug: APIC version is 0 for CPU 0/0x0, fixing up to 0x10 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) [ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 6, version 255, address 0xfec00000, GSI 0-255 [ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec20000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 7, version 255, address 0xfec20000, GSI 24-279 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] SMP: Allowing 6 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 296 [ 0.000000] Allocating PCI resources starting at b0000000 (gap: b0000000:4ec00000) [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.1.0 (preserve-AD) [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:6 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88002fdc0000 s81728 r8192 d20672 u110592 [ 0.000000] pcpu-alloc: s81728 r8192 d20672 u110592 alloc=27*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1927437 [ 0.000000] Kernel command line: root=/dev/mapper/serveerstertje-root ro nomodeset vga=794 video=vesafb earlyprintk=xen max_loop=255 loop_max_part=63 acpi_enforce_resources=lax xen-pciback.hide=(03:06.0)(04:00.0)(04:00.1)(04:00.2)(04:00.3)(04:00.4)(04:00.5)(04:00.6)(04:00.7)(0a:00.0)(0a:00.1)(0a:00.2)(0a:00.3)(0a:00.4)(0a:00.5)(0a:00.6)(0a:00.7)(05:00.0)(05:00.1)(07:01.0)(07:01.1)(07:01.2) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Placing 64MB software IO TLB between ffff88002a0f2000 - ffff88002e0f2000 [ 0.000000] software IO TLB at phys 0x2a0f2000 - 0x2e0f2000 [ 0.000000] Memory: 558236k/11272192k available (8019k kernel code, 3408324k absent, 7305632k reserved, 4198k data, 844k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU debugfs-based tracing is enabled. [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:4352 nr_irqs:1536 16 [ 0.000000] xen: sci override: global_irq=9 trigger=0 polarity=1 [ 0.000000] xen: registering gsi 9 triggering 0 polarity 1 [ 0.000000] xen: --> pirq=9 -> irq=9 [ 0.000000] xen: acpi sci 9 [ 0.000000] xen: --> pirq=1 -> irq=1 [ 0.000000] xen: --> pirq=2 -> irq=2 [ 0.000000] xen: --> pirq=3 -> irq=3 [ 0.000000] xen: --> pirq=4 -> irq=4 [ 0.000000] xen: --> pirq=5 -> irq=5 [ 0.000000] xen: --> pirq=6 -> irq=6 [ 0.000000] xen: --> pirq=7 -> irq=7 [ 0.000000] xen: --> pirq=8 -> irq=8 [ 0.000000] xen_map_pirq_gsi: returning irq 9 for gsi 9 [ 0.000000] xen: --> pirq=9 -> irq=9 [ 0.000000] xen: --> pirq=10 -> irq=10 [ 0.000000] xen: --> pirq=11 -> irq=11 [ 0.000000] xen: --> pirq=12 -> irq=12 [ 0.000000] xen: --> pirq=13 -> irq=13 [ 0.000000] xen: --> pirq=14 -> irq=14 [ 0.000000] xen: --> pirq=15 -> irq=15 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled, bootconsole disabled [ 0.000000] Xen: using vcpuop timer interface [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] Detected 3200.190 MHz processor. [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6400.38 BogoMIPS (lpj=12800760) [ 0.004000] pid_max: default: 32768 minimum: 301 [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Initializing. [ 0.004000] SELinux: Starting in permissive mode [ 0.004000] Mount-cache hash table entries: 256 [ 0.004000] tseg: 0000000000 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] ACPI: Core revision 20110316 [ 0.011707] ftrace: allocating 28335 entries in 112 pages [ 0.016100] Performance Events: Broken PMU hardware detected, using software events only. [ 0.016247] MCE: In-kernel MCE decoding enabled. [ 0.016327] installing Xen timer for CPU 1 [ 0.016499] installing Xen timer for CPU 2 [ 0.016674] installing Xen timer for CPU 3 [ 0.016835] installing Xen timer for CPU 4 [ 0.016994] installing Xen timer for CPU 5 [ 0.017104] Brought up 6 CPUs [ 0.017167] Grant table initialized [ 0.017167] print_constraints: dummy: [ 0.017167] NET: Registered protocol family 16 [ 0.017167] node 0 link 0: io port [1000, ffffff] [ 0.017167] TOM: 00000000b0000000 aka 2816M [ 0.017167] Fam 10h mmconf [e0000000, efffffff] [ 0.017167] node 0 link 0: mmio [e0000000, efffffff] ==> none [ 0.017167] node 0 link 0: mmio [f0000000, ffffffff] [ 0.017167] node 0 link 0: mmio [a0000, bffff] [ 0.017167] node 0 link 0: mmio [b0000000, dfffffff] [ 0.017167] TOM2: 0000000250000000 aka 9472M [ 0.017167] bus: [00, 07] on node 0 link 0 [ 0.017167] bus: 00 index 0 [io 0x0000-0xffff] [ 0.017167] bus: 00 index 1 [mem 0xf0000000-0xffffffff] [ 0.017167] bus: 00 index 2 [mem 0x000a0000-0x000bffff] [ 0.017167] bus: 00 index 3 [mem 0xb0000000-0xdfffffff] [ 0.017167] bus: 00 index 4 [mem 0x250000000-0xfcffffffff] [ 0.017167] Extended Config Space enabled on 1 nodes [ 0.017167] ACPI: bus type pci registered [ 0.017167] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.017167] PCI: not using MMCONFIG [ 0.017167] PCI: Using configuration type 1 for base access [ 0.017167] PCI: Using configuration type 1 for extended access [ 0.028059] bio: create slab at 0 [ 0.033275] ACPI: EC: Look up EC in DSDT [ 0.035710] ACPI: Executed 3 blocks of module-level executable AML code [ 0.052619] ACPI: Interpreter enabled [ 0.052626] ACPI: (supports S0 S5) [ 0.052638] ACPI: Using IOAPIC for interrupt routing [ 0.052672] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.054068] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.232174] ACPI: No dock devices found. [ 0.232181] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.232508] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.232554] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.232554] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.232554] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.232554] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] [ 0.232554] pci_root PNP0A03:00: host bridge window [mem 0xb0000000-0xdfffffff] [ 0.232554] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff] [ 0.232554] pci_bus 0000:00: scanning bus [ 0.232554] pci 0000:00:00.0: [1002:5a11] type 0 class 0x000600 [ 0.232554] pci 0000:00:00.0: calling quirk_no_ata_d3+0x0/0x20 [ 0.232554] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x1c [ 0.232554] pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x173 [ 0.232554] pci 0000:00:00.2: [1002:5a23] type 0 class 0x000806 [ 0.232554] pci 0000:00:00.2: calling quirk_no_ata_d3+0x0/0x20 [ 0.232554] pci 0000:00:00.2: calling quirk_mmio_always_on+0x0/0x1c [ 0.232554] pci 0000:00:00.2: calling quirk_resource_alignment+0x0/0x173 [ 0.232565] pci 0000:00:02.0: [1002:5a16] type 1 class 0x000604 [ 0.232568] pci 0000:00:02.0: calling quirk_no_ata_d3+0x0/0x20 [ 0.232570] pci 0000:00:02.0: calling quirk_mmio_always_on+0x0/0x1c [ 0.232606] pci 0000:00:02.0: calling quirk_resource_alignment+0x0/0x173 [ 0.232635] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.232639] pci 0000:00:02.0: PME# disabled [ 0.232663] pci 0000:00:03.0: [1002:5a17] type 1 class 0x000604 [ 0.232666] pci 0000:00:03.0: calling quirk_no_ata_d3+0x0/0x20 [ 0.232669] pci 0000:00:03.0: calling quirk_mmio_always_on+0x0/0x1c [ 0.232711] pci 0000:00:03.0: calling quirk_resource_alignment+0x0/0x173 [ 0.232733] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.232737] pci 0000:00:03.0: PME# disabled [ 0.232763] pci 0000:00:05.0: [1002:5a19] type 1 class 0x000604 [ 0.232766] pci 0000:00:05.0: calling quirk_no_ata_d3+0x0/0x20 [ 0.232773] pci 0000:00:05.0: calling quirk_mmio_always_on+0x0/0x1c [ 0.232813] pci 0000:00:05.0: calling quirk_resource_alignment+0x0/0x173 [ 0.232832] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.232836] pci 0000:00:05.0: PME# disabled [ 0.232858] pci 0000:00:06.0: [1002:5a1a] type 1 class 0x000604 [ 0.232861] pci 0000:00:06.0: calling quirk_no_ata_d3+0x0/0x20 [ 0.232863] pci 0000:00:06.0: calling quirk_mmio_always_on+0x0/0x1c [ 0.232903] pci 0000:00:06.0: calling quirk_resource_alignment+0x0/0x173 [ 0.232923] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.232926] pci 0000:00:06.0: PME# disabled [ 0.232955] pci 0000:00:0a.0: [1002:5a1d] type 1 class 0x000604 [ 0.232965] pci 0000:00:0a.0: calling quirk_no_ata_d3+0x0/0x20 [ 0.232967] pci 0000:00:0a.0: calling quirk_mmio_always_on+0x0/0x1c [ 0.233000] pci 0000:00:0a.0: calling quirk_resource_alignment+0x0/0x173 [ 0.233020] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.233023] pci 0000:00:0a.0: PME# disabled [ 0.233045] pci 0000:00:0b.0: [1002:5a1f] type 1 class 0x000604 [ 0.233055] pci 0000:00:0b.0: calling quirk_no_ata_d3+0x0/0x20 [ 0.233057] pci 0000:00:0b.0: calling quirk_mmio_always_on+0x0/0x1c [ 0.233090] pci 0000:00:0b.0: calling quirk_resource_alignment+0x0/0x173 [ 0.233110] pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold [ 0.233113] pci 0000:00:0b.0: PME# disabled [ 0.233144] pci 0000:00:0d.0: [1002:5a1e] type 1 class 0x000604 [ 0.233146] pci 0000:00:0d.0: calling quirk_no_ata_d3+0x0/0x20 [ 0.233148] pci 0000:00:0d.0: calling quirk_mmio_always_on+0x0/0x1c [ 0.233181] pci 0000:00:0d.0: calling quirk_resource_alignment+0x0/0x173 [ 0.233201] pci 0000:00:0d.0: PME# supported from D0 D3hot D3cold [ 0.233204] pci 0000:00:0d.0: PME# disabled [ 0.233244] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101 [ 0.233257] pci 0000:00:11.0: calling quirk_no_ata_d3+0x0/0x20 [ 0.233259] pci 0000:00:11.0: calling quirk_mmio_always_on+0x0/0x1c [ 0.233274] pci 0000:00:11.0: reg 10: [io 0x7000-0x7007] [ 0.233285] pci 0000:00:11.0: reg 14: [io 0x6000-0x6003] [ 0.233295] pci 0000:00:11.0: reg 18: [io 0x5000-0x5007] [ 0.233313] pci 0000:00:11.0: reg 1c: [io 0x3000-0x3003] [ 0.233324] pci 0000:00:11.0: reg 20: [io 0x2000-0x200f] [ 0.233335] pci 0000:00:11.0: reg 24: [mem 0xf98ff000-0xf98ff3ff] [ 0.233351] pci 0000:00:11.0: calling quirk_amd_ide_mode+0x0/0xc9 [ 0.233361] pci 0000:00:11.0: set SATA to AHCI mode [ 0.233364] pci 0000:00:11.0: calling quirk_resource_alignment+0x0/0x173 [ 0.233422] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03 [ 0.233425] pci 0000:00:12.0: calling quirk_no_ata_d3+0x0/0x20 [ 0.233428] pci 0000:00:12.0: calling quirk_mmio_always_on+0x0/0x1c [ 0.233442] pci 0000:00:12.0: reg 10: [mem 0xf98fb000-0xf98fbfff] [ 0.233537] pci 0000:00:12.0: calling quirk_resource_alignment+0x0/0x173 [ 0.233558] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03 [ 0.233569] pci 0000:00:12.2: calling quirk_no_ata_d3+0x0/0x20 [ 0.233571] pci 0000:00:12.2: calling quirk_mmio_always_on+0x0/0x1c [ 0.233585] pci 0000:00:12.2: reg 10: [mem 0xf98ff400-0xf98ff4ff] [ 0.233645] pci 0000:00:12.2: calling quirk_resource_alignment+0x0/0x173 [ 0.233675] pci 0000:00:12.2: supports D1 D2 [ 0.233677] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.233681] pci 0000:00:12.2: PME# disabled [ 0.233704] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03 [ 0.233708] pci 0000:00:13.0: calling quirk_no_ata_d3+0x0/0x20 [ 0.233710] pci 0000:00:13.0: calling quirk_mmio_always_on+0x0/0x1c [ 0.233724] pci 0000:00:13.0: reg 10: [mem 0xf98fc000-0xf98fcfff] [ 0.233791] pci 0000:00:13.0: calling quirk_resource_alignment+0x0/0x173 [ 0.233813] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03 [ 0.233830] pci 0000:00:13.2: calling quirk_no_ata_d3+0x0/0x20 [ 0.233832] pci 0000:00:13.2: calling quirk_mmio_always_on+0x0/0x1c [ 0.233846] pci 0000:00:13.2: reg 10: [mem 0xf98ff800-0xf98ff8ff] [ 0.233906] pci 0000:00:13.2: calling quirk_resource_alignment+0x0/0x173 [ 0.233936] pci 0000:00:13.2: supports D1 D2 [ 0.233938] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.233942] pci 0000:00:13.2: PME# disabled [ 0.233965] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 [ 0.233969] pci 0000:00:14.0: calling quirk_no_ata_d3+0x0/0x20 [ 0.233971] pci 0000:00:14.0: calling quirk_mmio_always_on+0x0/0x1c [ 0.233974] pci 0000:00:14.0: calling sb600_disable_hpet_bar+0x0/0x60 [ 0.234051] pci 0000:00:14.0: calling force_disable_hpet_msi+0x0/0x20 [ 0.234054] pci 0000:00:14.0: calling quirk_resource_alignment+0x0/0x173 [ 0.234067] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101 [ 0.234071] pci 0000:00:14.1: calling quirk_no_ata_d3+0x0/0x20 [ 0.234073] pci 0000:00:14.1: calling quirk_mmio_always_on+0x0/0x1c [ 0.234094] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] [ 0.234105] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] [ 0.234116] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] [ 0.234127] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] [ 0.234138] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f] [ 0.234163] pci 0000:00:14.1: calling quirk_resource_alignment+0x0/0x173 [ 0.234185] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601 [ 0.234189] pci 0000:00:14.3: calling quirk_no_ata_d3+0x0/0x20 [ 0.234191] pci 0000:00:14.3: calling quirk_mmio_always_on+0x0/0x1c [ 0.234270] pci 0000:00:14.3: calling quirk_resource_alignment+0x0/0x173 [ 0.234284] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 [ 0.234287] pci 0000:00:14.4: calling quirk_no_ata_d3+0x0/0x20 [ 0.234289] pci 0000:00:14.4: calling quirk_mmio_always_on+0x0/0x1c [ 0.234322] pci 0000:00:14.4: calling quirk_resource_alignment+0x0/0x173 [ 0.234336] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03 [ 0.234339] pci 0000:00:14.5: calling quirk_no_ata_d3+0x0/0x20 [ 0.234342] pci 0000:00:14.5: calling quirk_mmio_always_on+0x0/0x1c [ 0.234362] pci 0000:00:14.5: reg 10: [mem 0xf98fd000-0xf98fdfff] [ 0.234423] pci 0000:00:14.5: calling quirk_resource_alignment+0x0/0x173 [ 0.234452] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604 [ 0.234455] pci 0000:00:15.0: calling quirk_no_ata_d3+0x0/0x20 [ 0.234457] pci 0000:00:15.0: calling quirk_mmio_always_on+0x0/0x1c [ 0.234501] pci 0000:00:15.0: calling quirk_resource_alignment+0x0/0x173 [ 0.234534] pci 0000:00:15.0: supports D1 D2 [ 0.234567] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03 [ 0.234570] pci 0000:00:16.0: calling quirk_no_ata_d3+0x0/0x20 [ 0.234573] pci 0000:00:16.0: calling quirk_mmio_always_on+0x0/0x1c [ 0.234587] pci 0000:00:16.0: reg 10: [mem 0xf98fe000-0xf98fefff] [ 0.234654] pci 0000:00:16.0: calling quirk_resource_alignment+0x0/0x173 [ 0.234675] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03 [ 0.234686] pci 0000:00:16.2: calling quirk_no_ata_d3+0x0/0x20 [ 0.234688] pci 0000:00:16.2: calling quirk_mmio_always_on+0x0/0x1c [ 0.234709] pci 0000:00:16.2: reg 10: [mem 0xf98ffc00-0xf98ffcff] [ 0.234769] pci 0000:00:16.2: calling quirk_resource_alignment+0x0/0x173 [ 0.234799] pci 0000:00:16.2: supports D1 D2 [ 0.234800] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.234805] pci 0000:00:16.2: PME# disabled [ 0.234830] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600 [ 0.234832] pci 0000:00:18.0: calling quirk_mmio_always_on+0x0/0x1c [ 0.234856] pci 0000:00:18.0: calling quirk_resource_alignment+0x0/0x173 [ 0.234908] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600 [ 0.234910] pci 0000:00:18.1: calling quirk_mmio_always_on+0x0/0x1c [ 0.234934] pci 0000:00:18.1: calling quirk_resource_alignment+0x0/0x173 [ 0.234943] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600 [ 0.234945] pci 0000:00:18.2: calling quirk_mmio_always_on+0x0/0x1c [ 0.234969] pci 0000:00:18.2: calling quirk_resource_alignment+0x0/0x173 [ 0.234980] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600 [ 0.234982] pci 0000:00:18.3: calling quirk_mmio_always_on+0x0/0x1c [ 0.235006] pci 0000:00:18.3: calling quirk_resource_alignment+0x0/0x173 [ 0.235023] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600 [ 0.235025] pci 0000:00:18.4: calling quirk_mmio_always_on+0x0/0x1c [ 0.235056] pci 0000:00:18.4: calling quirk_resource_alignment+0x0/0x173 [ 0.235073] pci_bus 0000:00: fixups for bus [ 0.235077] pci 0000:00:02.0: scanning [bus 0b-0b] behind bridge, pass 0 [ 0.235117] pci_bus 0000:0b: scanning bus [ 0.235140] pci 0000:0b:00.0: [10de:06e4] type 0 class 0x000300 [ 0.235143] pci 0000:0b:00.0: calling quirk_mmio_always_on+0x0/0x1c [ 0.235156] pci 0000:0b:00.0: reg 10: [mem 0xfd000000-0xfdffffff] [ 0.235171] pci 0000:0b:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.235186] pci 0000:0b:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit] [ 0.235196] pci 0000:0b:00.0: reg 24: [io 0xe800-0xe87f] [ 0.235206] pci 0000:0b:00.0: reg 30: [mem 0xfe9e0000-0xfe9fffff pref] [ 0.235212] pci 0000:0b:00.0: calling quirk_resource_alignment+0x0/0x173 [ 0.240044] pci_bus 0000:0b: fixups for bus [ 0.240047] pci 0000:00:02.0: PCI bridge to [bus 0b-0b] [ 0.240055] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.240059] pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfe9fffff] [ 0.240064] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.240066] pci_bus 0000:0b: bus scan returning with max=0b [ 0.240070] pci 0000:00:03.0: scanning [bus 0a-0a] behind bridge, pass 0 [ 0.240110] pci_bus 0000:0a: scanning bus [ 0.240141] pci 0000:0a:00.0: [9710:9990] type 0 class 0x000c03 [ 0.240150] pci 0000:0a:00.0: calling quirk_mmio_always_on+0x0/0x1c [ 0.240168] pci 0000:0a:00.0: reg 10: [mem 0xf9ff8000-0xf9ff8fff] [ 0.240256] pci 0000:0a:00.0: calling quirk_netmos+0x0/0x9d [ 0.240259] pci 0000:0a:00.0: calling quirk_resource_alignment+0x0/0x173 [ 0.240305] pci 0000:0a:00.0: supports D1 D2 [ 0.240307] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot [ 0.240312] pci 0000:0a:00.0: PME# disabled [ 0.240351] pci 0000:0a:00.1: [9710:9990] type 0 class 0x000c03 [ 0.240354] pci 0000:0a:00.1: calling quirk_mmio_always_on+0x0/0x1c [ 0.240372] pci 0000:0a:00.1: reg 10: [mem 0xf9ff9000-0xf9ff9fff] [ 0.240459] pci 0000:0a:00.1: calling quirk_netmos+0x0/0x9d [ 0.240468] pci 0000:0a:00.1: calling quirk_resource_alignment+0x0/0x173 [ 0.240507] pci 0000:0a:00.1: supports D1 D2 [ 0.240508] pci 0000:0a:00.1: PME# supported from D0 D1 D2 D3hot [ 0.240514] pci 0000:0a:00.1: PME# disabled [ 0.240558] pci 0000:0a:00.2: [9710:9990] type 0 class 0x000c03 [ 0.240562] pci 0000:0a:00.2: calling quirk_mmio_always_on+0x0/0x1c [ 0.240580] pci 0000:0a:00.2: reg 10: [mem 0xf9ffa000-0xf9ffafff] [ 0.240666] pci 0000:0a:00.2: calling quirk_netmos+0x0/0x9d [ 0.240669] pci 0000:0a:00.2: calling quirk_resource_alignment+0x0/0x173 [ 0.240707] pci 0000:0a:00.2: supports D1 D2 [ 0.240709] pci 0000:0a:00.2: PME# supported from D0 D1 D2 D3hot [ 0.240714] pci 0000:0a:00.2: PME# disabled [ 0.240758] pci 0000:0a:00.3: [9710:9990] type 0 class 0x000c03 [ 0.240762] pci 0000:0a:00.3: calling quirk_mmio_always_on+0x0/0x1c [ 0.240780] pci 0000:0a:00.3: reg 10: [mem 0xf9ffb000-0xf9ffbfff] [ 0.240866] pci 0000:0a:00.3: calling quirk_netmos+0x0/0x9d [ 0.240869] pci 0000:0a:00.3: calling quirk_resource_alignment+0x0/0x173 [ 0.240942] pci 0000:0a:00.3: supports D1 D2 [ 0.240943] pci 0000:0a:00.3: PME# supported from D0 D1 D2 D3hot [ 0.240948] pci 0000:0a:00.3: PME# disabled [ 0.240986] pci 0000:0a:00.4: [9710:9990] type 0 class 0x000c03 [ 0.240989] pci 0000:0a:00.4: calling quirk_mmio_always_on+0x0/0x1c [ 0.241007] pci 0000:0a:00.4: reg 10: [mem 0xf9ffc000-0xf9ffcfff] [ 0.241094] pci 0000:0a:00.4: calling quirk_netmos+0x0/0x9d [ 0.241096] pci 0000:0a:00.4: calling quirk_resource_alignment+0x0/0x173 [ 0.241135] pci 0000:0a:00.4: supports D1 D2 [ 0.241136] pci 0000:0a:00.4: PME# supported from D0 D1 D2 D3hot [ 0.241142] pci 0000:0a:00.4: PME# disabled [ 0.241201] pci 0000:0a:00.5: [9710:9990] type 0 class 0x000c03 [ 0.241205] pci 0000:0a:00.5: calling quirk_mmio_always_on+0x0/0x1c [ 0.241223] pci 0000:0a:00.5: reg 10: [mem 0xf9ffd000-0xf9ffdfff] [ 0.241314] pci 0000:0a:00.5: calling quirk_netmos+0x0/0x9d [ 0.241317] pci 0000:0a:00.5: calling quirk_resource_alignment+0x0/0x173 [ 0.241365] pci 0000:0a:00.5: supports D1 D2 [ 0.241366] pci 0000:0a:00.5: PME# supported from D0 D1 D2 D3hot [ 0.241372] pci 0000:0a:00.5: PME# disabled [ 0.241412] pci 0000:0a:00.6: [9710:9990] type 0 class 0x000c03 [ 0.241422] pci 0000:0a:00.6: calling quirk_mmio_always_on+0x0/0x1c [ 0.241441] pci 0000:0a:00.6: reg 10: [mem 0xf9ffe000-0xf9ffefff] [ 0.241532] pci 0000:0a:00.6: calling quirk_netmos+0x0/0x9d [ 0.241534] pci 0000:0a:00.6: calling quirk_resource_alignment+0x0/0x173 [ 0.241575] pci 0000:0a:00.6: supports D1 D2 [ 0.241577] pci 0000:0a:00.6: PME# supported from D0 D1 D2 D3hot [ 0.241583] pci 0000:0a:00.6: PME# disabled [ 0.241629] pci 0000:0a:00.7: [9710:9990] type 0 class 0x000c03 [ 0.241633] pci 0000:0a:00.7: calling quirk_mmio_always_on+0x0/0x1c [ 0.241651] pci 0000:0a:00.7: reg 10: [mem 0xf9fff000-0xf9ffffff] [ 0.241742] pci 0000:0a:00.7: calling quirk_netmos+0x0/0x9d [ 0.241745] pci 0000:0a:00.7: calling quirk_resource_alignment+0x0/0x173 [ 0.241793] pci 0000:0a:00.7: supports D1 D2 [ 0.241795] pci 0000:0a:00.7: PME# supported from D0 D1 D2 D3hot [ 0.241800] pci 0000:0a:00.7: PME# disabled [ 0.248088] pci_bus 0000:0a: fixups for bus [ 0.248091] pci 0000:00:03.0: PCI bridge to [bus 0a-0a] [ 0.248099] pci 0000:00:03.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.248102] pci 0000:00:03.0: bridge window [mem 0xf9f00000-0xf9ffffff] [ 0.248108] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.248110] pci_bus 0000:0a: bus scan returning with max=0a [ 0.248114] pci 0000:00:05.0: scanning [bus 09-09] behind bridge, pass 0 [ 0.248155] pci_bus 0000:09: scanning bus [ 0.248181] pci 0000:09:00.0: [10ec:8168] type 0 class 0x000200 [ 0.248186] pci 0000:09:00.0: calling quirk_mmio_always_on+0x0/0x1c [ 0.248202] pci 0000:09:00.0: reg 10: [io 0xd800-0xd8ff] [ 0.248230] pci 0000:09:00.0: reg 18: [mem 0xcffff000-0xcfffffff 64bit pref] [ 0.248248] pci 0000:09:00.0: reg 20: [mem 0xcfff8000-0xcfffbfff 64bit pref] [ 0.248267] pci 0000:09:00.0: reg 30: [mem 0xf9ee0000-0xf9efffff pref] [ 0.248273] pci 0000:09:00.0: calling quirk_resource_alignment+0x0/0x173 [ 0.248310] pci 0000:09:00.0: supports D1 D2 [ 0.248312] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.248317] pci 0000:09:00.0: PME# disabled [ 0.256042] pci_bus 0000:09: fixups for bus [ 0.256044] pci 0000:00:05.0: PCI bridge to [bus 09-09] [ 0.256052] pci 0000:00:05.0: bridge window [io 0xd000-0xdfff] [ 0.256055] pci 0000:00:05.0: bridge window [mem 0xf9e00000-0xf9efffff] [ 0.256060] pci 0000:00:05.0: bridge window [mem 0xcff00000-0xcfffffff 64bit pref] [ 0.256062] pci_bus 0000:09: bus scan returning with max=09 [ 0.256067] pci 0000:00:06.0: scanning [bus 08-08] behind bridge, pass 0 [ 0.256107] pci_bus 0000:08: scanning bus [ 0.256134] pci 0000:08:00.0: [10ec:8168] type 0 class 0x000200 [ 0.256139] pci 0000:08:00.0: calling quirk_mmio_always_on+0x0/0x1c [ 0.256155] pci 0000:08:00.0: reg 10: [io 0xc800-0xc8ff] [ 0.256183] pci 0000:08:00.0: reg 18: [mem 0xcfeff000-0xcfefffff 64bit pref] [ 0.256201] pci 0000:08:00.0: reg 20: [mem 0xcfef8000-0xcfefbfff 64bit pref] [ 0.256220] pci 0000:08:00.0: reg 30: [mem 0xf9de0000-0xf9dfffff pref] [ 0.256226] pci 0000:08:00.0: calling quirk_resource_alignment+0x0/0x173 [ 0.256263] pci 0000:08:00.0: supports D1 D2 [ 0.256264] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.256269] pci 0000:08:00.0: PME# disabled [ 0.264042] pci_bus 0000:08: fixups for bus [ 0.264045] pci 0000:00:06.0: PCI bridge to [bus 08-08] [ 0.264052] pci 0000:00:06.0: bridge window [io 0xc000-0xcfff] [ 0.264056] pci 0000:00:06.0: bridge window [mem 0xf9d00000-0xf9dfffff] [ 0.264061] pci 0000:00:06.0: bridge window [mem 0xcfe00000-0xcfefffff 64bit pref] [ 0.264063] pci_bus 0000:08: bus scan returning with max=08 [ 0.264067] pci 0000:00:0a.0: scanning [bus 06-07] behind bridge, pass 0 [ 0.264115] pci_bus 0000:06: scanning bus [ 0.264142] pci 0000:06:00.0: [104c:8231] type 1 class 0x000604 [ 0.264147] pci 0000:06:00.0: calling quirk_mmio_always_on+0x0/0x1c [ 0.264243] pci 0000:06:00.0: calling quirk_resource_alignment+0x0/0x173 [ 0.264285] pci 0000:06:00.0: supports D1 D2 [ 0.264307] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.264319] pci_bus 0000:06: fixups for bus [ 0.264321] pci 0000:00:0a.0: PCI bridge to [bus 06-07] [ 0.264327] pci 0000:00:0a.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.264331] pci 0000:00:0a.0: bridge window [mem 0xf9c00000-0xf9cfffff] [ 0.264336] pci 0000:00:0a.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.264339] pci 0000:06:00.0: scanning [bus 07-07] behind bridge, pass 0 [ 0.264421] pci_bus 0000:07: scanning bus [ 0.264447] pci 0000:07:01.0: [1033:0035] type 0 class 0x000c03 [ 0.264457] pci 0000:07:01.0: calling quirk_mmio_always_on+0x0/0x1c [ 0.264477] pci 0000:07:01.0: reg 10: [mem 0xf9cfd000-0xf9cfdfff] [ 0.264573] pci 0000:07:01.0: calling quirk_resource_alignment+0x0/0x173 [ 0.264599] pci 0000:07:01.0: supports D1 D2 [ 0.264607] pci 0000:07:01.0: PME# supported from D0 D1 D2 D3hot [ 0.264613] pci 0000:07:01.0: PME# disabled [ 0.264637] pci 0000:07:01.1: [1033:0035] type 0 class 0x000c03 [ 0.264647] pci 0000:07:01.1: calling quirk_mmio_always_on+0x0/0x1c [ 0.264667] pci 0000:07:01.1: reg 10: [mem 0xf9cfe000-0xf9cfefff] [ 0.264763] pci 0000:07:01.1: calling quirk_resource_alignment+0x0/0x173 [ 0.264795] pci 0000:07:01.1: supports D1 D2 [ 0.264797] pci 0000:07:01.1: PME# supported from D0 D1 D2 D3hot [ 0.264802] pci 0000:07:01.1: PME# disabled [ 0.264827] pci 0000:07:01.2: [1033:00e0] type 0 class 0x000c03 [ 0.264837] pci 0000:07:01.2: calling quirk_mmio_always_on+0x0/0x1c [ 0.264856] pci 0000:07:01.2: reg 10: [mem 0xf9cffc00-0xf9cffcff] [ 0.264959] pci 0000:07:01.2: calling quirk_resource_alignment+0x0/0x173 [ 0.264985] pci 0000:07:01.2: supports D1 D2 [ 0.264986] pci 0000:07:01.2: PME# supported from D0 D1 D2 D3hot [ 0.264992] pci 0000:07:01.2: PME# disabled [ 0.265080] pci_bus 0000:07: fixups for bus [ 0.265081] pci 0000:06:00.0: PCI bridge to [bus 07-07] [ 0.265091] pci 0000:06:00.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.265096] pci 0000:06:00.0: bridge window [mem 0xf9c00000-0xf9cfffff] [ 0.265105] pci 0000:06:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.265107] pci_bus 0000:07: bus scan returning with max=07 [ 0.265112] pci 0000:06:00.0: scanning [bus 07-07] behind bridge, pass 1 [ 0.265119] pci_bus 0000:06: bus scan returning with max=07 [ 0.265129] pci 0000:00:0b.0: scanning [bus 05-05] behind bridge, pass 0 [ 0.265169] pci_bus 0000:05: scanning bus [ 0.265184] pci 0000:05:00.0: [1002:95c5] type 0 class 0x000300 [ 0.265187] pci 0000:05:00.0: calling quirk_no_ata_d3+0x0/0x20 [ 0.265189] pci 0000:05:00.0: calling quirk_mmio_always_on+0x0/0x1c [ 0.265215] pci 0000:05:00.0: reg 10: [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.265232] pci 0000:05:00.0: reg 18: [mem 0xf9be0000-0xf9beffff 64bit] [ 0.265243] pci 0000:05:00.0: reg 20: [io 0xb000-0xb0ff] [ 0.265263] pci 0000:05:00.0: reg 30: [mem 0xf9bc0000-0xf9bdffff pref] [ 0.265269] pci 0000:05:00.0: calling quirk_resource_alignment+0x0/0x173 [ 0.265294] pci 0000:05:00.0: supports D1 D2 [ 0.265329] pci 0000:05:00.1: [1002:aa28] type 0 class 0x000403 [ 0.265332] pci 0000:05:00.1: calling quirk_no_ata_d3+0x0/0x20 [ 0.265334] pci 0000:05:00.1: calling quirk_mmio_always_on+0x0/0x1c [ 0.265353] pci 0000:05:00.1: reg 10: [mem 0xf9bfc000-0xf9bfffff 64bit] [ 0.265412] pci 0000:05:00.1: calling quirk_resource_alignment+0x0/0x173 [ 0.265438] pci 0000:05:00.1: supports D1 D2 [ 0.272049] pci_bus 0000:05: fixups for bus [ 0.272052] pci 0000:00:0b.0: PCI bridge to [bus 05-05] [ 0.272059] pci 0000:00:0b.0: bridge window [io 0xb000-0xbfff] [ 0.272062] pci 0000:00:0b.0: bridge window [mem 0xf9b00000-0xf9bfffff] [ 0.272068] pci 0000:00:0b.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.272069] pci_bus 0000:05: bus scan returning with max=05 [ 0.272073] pci 0000:00:0d.0: scanning [bus 04-04] behind bridge, pass 0 [ 0.272115] pci_bus 0000:04: scanning bus [ 0.272144] pci 0000:04:00.0: [9710:9990] type 0 class 0x000c03 [ 0.272150] pci 0000:04:00.0: calling quirk_mmio_always_on+0x0/0x1c [ 0.272168] pci 0000:04:00.0: reg 10: [mem 0xf9af8000-0xf9af8fff] [ 0.272255] pci 0000:04:00.0: calling quirk_netmos+0x0/0x9d [ 0.272257] pci 0000:04:00.0: calling quirk_resource_alignment+0x0/0x173 [ 0.272304] pci 0000:04:00.0: supports D1 D2 [ 0.272306] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot [ 0.272311] pci 0000:04:00.0: PME# disabled [ 0.272349] pci 0000:04:00.1: [9710:9990] type 0 class 0x000c03 [ 0.272353] pci 0000:04:00.1: calling quirk_mmio_always_on+0x0/0x1c [ 0.272370] pci 0000:04:00.1: reg 10: [mem 0xf9af9000-0xf9af9fff] [ 0.272484] pci 0000:04:00.1: calling quirk_netmos+0x0/0x9d [ 0.272486] pci 0000:04:00.1: calling quirk_resource_alignment+0x0/0x173 [ 0.272525] pci 0000:04:00.1: supports D1 D2 [ 0.272526] pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot [ 0.272531] pci 0000:04:00.1: PME# disabled [ 0.272575] pci 0000:04:00.2: [9710:9990] type 0 class 0x000c03 [ 0.272579] pci 0000:04:00.2: calling quirk_mmio_always_on+0x0/0x1c [ 0.272596] pci 0000:04:00.2: reg 10: [mem 0xf9afa000-0xf9afafff] [ 0.272683] pci 0000:04:00.2: calling quirk_netmos+0x0/0x9d [ 0.272686] pci 0000:04:00.2: calling quirk_resource_alignment+0x0/0x173 [ 0.272725] pci 0000:04:00.2: supports D1 D2 [ 0.272726] pci 0000:04:00.2: PME# supported from D0 D1 D2 D3hot [ 0.272738] pci 0000:04:00.2: PME# disabled [ 0.272777] pci 0000:04:00.3: [9710:9990] type 0 class 0x000c03 [ 0.272781] pci 0000:04:00.3: calling quirk_mmio_always_on+0x0/0x1c [ 0.272799] pci 0000:04:00.3: reg 10: [mem 0xf9afb000-0xf9afbfff] [ 0.272885] pci 0000:04:00.3: calling quirk_netmos+0x0/0x9d [ 0.272888] pci 0000:04:00.3: calling quirk_resource_alignment+0x0/0x173 [ 0.272935] pci 0000:04:00.3: supports D1 D2 [ 0.272937] pci 0000:04:00.3: PME# supported from D0 D1 D2 D3hot [ 0.272942] pci 0000:04:00.3: PME# disabled [ 0.272979] pci 0000:04:00.4: [9710:9990] type 0 class 0x000c03 [ 0.272983] pci 0000:04:00.4: calling quirk_mmio_always_on+0x0/0x1c [ 0.273008] pci 0000:04:00.4: reg 10: [mem 0xf9afc000-0xf9afcfff] [ 0.273094] pci 0000:04:00.4: calling quirk_netmos+0x0/0x9d [ 0.273097] pci 0000:04:00.4: calling quirk_resource_alignment+0x0/0x173 [ 0.273136] pci 0000:04:00.4: supports D1 D2 [ 0.273137] pci 0000:04:00.4: PME# supported from D0 D1 D2 D3hot [ 0.273142] pci 0000:04:00.4: PME# disabled [ 0.273187] pci 0000:04:00.5: [9710:9990] type 0 class 0x000c03 [ 0.273190] pci 0000:04:00.5: calling quirk_mmio_always_on+0x0/0x1c [ 0.273208] pci 0000:04:00.5: reg 10: [mem 0xf9afd000-0xf9afdfff] [ 0.273295] pci 0000:04:00.5: calling quirk_netmos+0x0/0x9d [ 0.273297] pci 0000:04:00.5: calling quirk_resource_alignment+0x0/0x173 [ 0.273343] pci 0000:04:00.5: supports D1 D2 [ 0.273345] pci 0000:04:00.5: PME# supported from D0 D1 D2 D3hot [ 0.273350] pci 0000:04:00.5: PME# disabled [ 0.273387] pci 0000:04:00.6: [9710:9990] type 0 class 0x000c03 [ 0.273391] pci 0000:04:00.6: calling quirk_mmio_always_on+0x0/0x1c [ 0.273409] pci 0000:04:00.6: reg 10: [mem 0xf9afe000-0xf9afefff] [ 0.273496] pci 0000:04:00.6: calling quirk_netmos+0x0/0x9d [ 0.273498] pci 0000:04:00.6: calling quirk_resource_alignment+0x0/0x173 [ 0.273544] pci 0000:04:00.6: supports D1 D2 [ 0.273546] pci 0000:04:00.6: PME# supported from D0 D1 D2 D3hot [ 0.273551] pci 0000:04:00.6: PME# disabled [ 0.273589] pci 0000:04:00.7: [9710:9990] type 0 class 0x000c03 [ 0.273592] pci 0000:04:00.7: calling quirk_mmio_always_on+0x0/0x1c [ 0.273617] pci 0000:04:00.7: reg 10: [mem 0xf9aff000-0xf9afffff] [ 0.273704] pci 0000:04:00.7: calling quirk_netmos+0x0/0x9d [ 0.273706] pci 0000:04:00.7: calling quirk_resource_alignment+0x0/0x173 [ 0.273745] pci 0000:04:00.7: supports D1 D2 [ 0.273747] pci 0000:04:00.7: PME# supported from D0 D1 D2 D3hot [ 0.273752] pci 0000:04:00.7: PME# disabled [ 0.280096] pci_bus 0000:04: fixups for bus [ 0.280099] pci 0000:00:0d.0: PCI bridge to [bus 04-04] [ 0.280107] pci 0000:00:0d.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.280110] pci 0000:00:0d.0: bridge window [mem 0xf9a00000-0xf9afffff] [ 0.280115] pci 0000:00:0d.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.280117] pci_bus 0000:04: bus scan returning with max=04 [ 0.280122] pci 0000:00:14.4: scanning [bus 03-03] behind bridge, pass 0 [ 0.280134] pci_bus 0000:03: scanning bus [ 0.280160] pci 0000:03:06.0: [13f6:0111] type 0 class 0x000401 [ 0.280170] pci 0000:03:06.0: calling quirk_mmio_always_on+0x0/0x1c [ 0.280195] pci 0000:03:06.0: reg 10: [io 0xa800-0xa8ff] [ 0.280283] pci 0000:03:06.0: calling quirk_resource_alignment+0x0/0x173 [ 0.280307] pci 0000:03:06.0: supports D1 D2 [ 0.280365] pci_bus 0000:03: fixups for bus [ 0.280366] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode) [ 0.280372] pci 0000:00:14.4: bridge window [io 0xa000-0xafff] [ 0.280377] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.280381] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.280383] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.280385] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.280387] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.280389] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.280391] pci 0000:00:14.4: bridge window [mem 0xb0000000-0xdfffffff] (subtractive decode) [ 0.280393] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode) [ 0.280395] pci_bus 0000:03: bus scan returning with max=03 [ 0.280399] pci 0000:00:15.0: scanning [bus 02-02] behind bridge, pass 0 [ 0.280460] pci_bus 0000:02: scanning bus [ 0.280463] pci_bus 0000:02: fixups for bus [ 0.280465] pci 0000:00:15.0: PCI bridge to [bus 02-02] [ 0.280472] pci 0000:00:15.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.280476] pci 0000:00:15.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.280483] pci 0000:00:15.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.280485] pci_bus 0000:02: bus scan returning with max=02 [ 0.280489] pci 0000:00:02.0: scanning [bus 0b-0b] behind bridge, pass 1 [ 0.280494] pci 0000:00:03.0: scanning [bus 0a-0a] behind bridge, pass 1 [ 0.280499] pci 0000:00:05.0: scanning [bus 09-09] behind bridge, pass 1 [ 0.280504] pci 0000:00:06.0: scanning [bus 08-08] behind bridge, pass 1 [ 0.280510] pci 0000:00:0a.0: scanning [bus 06-07] behind bridge, pass 1 [ 0.280515] pci 0000:00:0b.0: scanning [bus 05-05] behind bridge, pass 1 [ 0.280520] pci 0000:00:0d.0: scanning [bus 04-04] behind bridge, pass 1 [ 0.280532] pci 0000:00:14.4: scanning [bus 03-03] behind bridge, pass 1 [ 0.280539] pci 0000:00:15.0: scanning [bus 02-02] behind bridge, pass 1 [ 0.280544] pci_bus 0000:00: bus scan returning with max=0b [ 0.280546] pci_bus 0000:00: on NUMA node 0 [ 0.280550] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.280669] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC02._PRT] [ 0.280692] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC03._PRT] [ 0.280715] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC05._PRT] [ 0.280735] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC06._PRT] [ 0.280759] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC0A._PRT] [ 0.280790] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC0B._PRT] [ 0.280812] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC0D._PRT] [ 0.280840] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] [ 0.280892] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT] [ 0.281058] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.281262] pci0000:00: ACPI _OSC control (0x1d) granted [ 0.292077] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 14 15) [ 0.292161] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 14 15) [ 0.292254] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 14 15) [ 0.292338] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 14 15) [ 0.292411] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 *7 10 11 14 15) [ 0.292455] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 *11 14 15) [ 0.292505] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 14 15) [ 0.292550] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 *10 11 14 15) [ 0.292591] xen/balloon: Initialising balloon driver. [ 0.292591] last_pfn = 0x2b0000 max_arch_pfn = 0x400000000 [ 0.317535] xen-balloon: Initialising balloon driver. [ 0.317535] vgaarb: device added: PCI:0000:0b:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.317535] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=none,locks=none [ 0.317535] vgaarb: loaded [ 0.317535] SCSI subsystem initialized [ 0.317535] libata version 3.00 loaded. [ 0.317535] usbcore: registered new interface driver usbfs [ 0.317535] usbcore: registered new interface driver hub [ 0.317535] usbcore: registered new device driver usb [ 0.317535] PCI: Using ACPI for IRQ routing [ 0.317535] PCI: pci_cache_line_size set to 64 bytes [ 0.317535] pci 0000:00:11.0: BAR 0: reserving [io 0x7000-0x7007 flags 0x40101] (d=0, p=0) [ 0.317535] pci 0000:00:11.0: BAR 1: reserving [io 0x6000-0x6003 flags 0x40101] (d=0, p=0) [ 0.317535] pci 0000:00:11.0: BAR 2: reserving [io 0x5000-0x5007 flags 0x40101] (d=0, p=0) [ 0.317535] pci 0000:00:11.0: BAR 3: reserving [io 0x3000-0x3003 flags 0x40101] (d=0, p=0) [ 0.317535] pci 0000:00:11.0: BAR 4: reserving [io 0x2000-0x200f flags 0x40101] (d=0, p=0) [ 0.317535] pci 0000:00:11.0: BAR 5: reserving [mem 0xf98ff000-0xf98ff3ff flags 0x40200] (d=0, p=0) [ 0.317535] pci 0000:00:12.0: BAR 0: reserving [mem 0xf98fb000-0xf98fbfff flags 0x40200] (d=0, p=0) [ 0.317535] pci 0000:00:12.2: BAR 0: reserving [mem 0xf98ff400-0xf98ff4ff flags 0x40200] (d=0, p=0) [ 0.317535] pci 0000:00:13.0: BAR 0: reserving [mem 0xf98fc000-0xf98fcfff flags 0x40200] (d=0, p=0) [ 0.317535] pci 0000:00:13.2: BAR 0: reserving [mem 0xf98ff800-0xf98ff8ff flags 0x40200] (d=0, p=0) [ 0.317535] pci 0000:00:14.1: BAR 0: reserving [io 0x01f0-0x01f7 flags 0x110] (d=0, p=0) [ 0.317535] pci 0000:00:14.1: BAR 1: reserving [io 0x03f6 flags 0x110] (d=0, p=0) [ 0.317535] pci 0000:00:14.1: BAR 2: reserving [io 0x0170-0x0177 flags 0x110] (d=0, p=0) [ 0.317535] pci 0000:00:14.1: BAR 3: reserving [io 0x0376 flags 0x110] (d=0, p=0) [ 0.317535] pci 0000:00:14.1: BAR 4: reserving [io 0xff00-0xff0f flags 0x40101] (d=0, p=0) [ 0.317535] pci 0000:00:14.5: BAR 0: reserving [mem 0xf98fd000-0xf98fdfff flags 0x40200] (d=0, p=0) [ 0.317535] pci 0000:00:16.0: BAR 0: reserving [mem 0xf98fe000-0xf98fefff flags 0x40200] (d=0, p=0) [ 0.317535] pci 0000:00:16.2: BAR 0: reserving [mem 0xf98ffc00-0xf98ffcff flags 0x40200] (d=0, p=0) [ 0.317535] pci 0000:0b:00.0: BAR 0: reserving [mem 0xfd000000-0xfdffffff flags 0x40200] (d=0, p=0) [ 0.317535] pci 0000:0b:00.0: BAR 1: reserving [mem 0xd0000000-0xdfffffff flags 0x14220c] (d=0, p=0) [ 0.317535] pci 0000:0b:00.0: BAR 3: reserving [mem 0xfa000000-0xfbffffff flags 0x140204] (d=0, p=0) [ 0.317535] pci 0000:0b:00.0: BAR 5: reserving [io 0xe800-0xe87f flags 0x40101] (d=0, p=0) [ 0.317535] pci 0000:0a:00.0: BAR 0: reserving [mem 0xf9ff8000-0xf9ff8fff flags 0x40200] (d=0, p=0) [ 0.317535] pci 0000:0a:00.1: BAR 0: reserving [mem 0xf9ff9000-0xf9ff9fff flags 0x40200] (d=0, p=0) [ 0.317535] pci 0000:0a:00.2: BAR 0: reserving [mem 0xf9ffa000-0xf9ffafff flags 0x40200] (d=0, p=0) [ 0.317535] pci 0000:0a:00.3: BAR 0: reserving [mem 0xf9ffb000-0xf9ffbfff flags 0x40200] (d=0, p=0) [ 0.317535] pci 0000:0a:00.4: BAR 0: reserving [mem 0xf9ffc000-0xf9ffcfff flags 0x40200] (d=0, p=0) [ 0.317535] pci 0000:0a:00.5: BAR 0: reserving [mem 0xf9ffd000-0xf9ffdfff flags 0x40200] (d=0, p=0) [ 0.317535] pci 0000:0a:00.6: BAR 0: reserving [mem 0xf9ffe000-0xf9ffefff flags 0x40200] (d=0, p=0) [ 0.317535] pci 0000:0a:00.7: BAR 0: reserving [mem 0xf9fff000-0xf9ffffff flags 0x40200] (d=0, p=0) [ 0.317535] pci 0000:09:00.0: BAR 0: reserving [io 0xd800-0xd8ff flags 0x40101] (d=0, p=0) [ 0.317535] pci 0000:09:00.0: BAR 2: reserving [mem 0xcffff000-0xcfffffff flags 0x14220c] (d=0, p=0) [ 0.317535] pci 0000:09:00.0: BAR 4: reserving [mem 0xcfff8000-0xcfffbfff flags 0x14220c] (d=0, p=0) [ 0.317535] pci 0000:08:00.0: BAR 0: reserving [io 0xc800-0xc8ff flags 0x40101] (d=0, p=0) [ 0.317535] pci 0000:08:00.0: BAR 2: reserving [mem 0xcfeff000-0xcfefffff flags 0x14220c] (d=0, p=0) [ 0.317535] pci 0000:08:00.0: BAR 4: reserving [mem 0xcfef8000-0xcfefbfff flags 0x14220c] (d=0, p=0) [ 0.317535] pci 0000:07:01.0: BAR 0: reserving [mem 0xf9cfd000-0xf9cfdfff flags 0x40200] (d=0, p=0) [ 0.317535] pci 0000:07:01.1: BAR 0: reserving [mem 0xf9cfe000-0xf9cfefff flags 0x40200] (d=0, p=0) [ 0.317535] pci 0000:07:01.2: BAR 0: reserving [mem 0xf9cffc00-0xf9cffcff flags 0x40200] (d=0, p=0) [ 0.317535] pci 0000:05:00.1: BAR 0: reserving [mem 0xf9bfc000-0xf9bfffff flags 0x140204] (d=0, p=0) [ 0.317535] pci 0000:04:00.0: BAR 0: reserving [mem 0xf9af8000-0xf9af8fff flags 0x40200] (d=0, p=0) [ 0.317535] pci 0000:04:00.1: BAR 0: reserving [mem 0xf9af9000-0xf9af9fff flags 0x40200] (d=0, p=0) [ 0.317535] pci 0000:04:00.2: BAR 0: reserving [mem 0xf9afa000-0xf9afafff flags 0x40200] (d=0, p=0) [ 0.317535] pci 0000:04:00.3: BAR 0: reserving [mem 0xf9afb000-0xf9afbfff flags 0x40200] (d=0, p=0) [ 0.317535] pci 0000:04:00.4: BAR 0: reserving [mem 0xf9afc000-0xf9afcfff flags 0x40200] (d=0, p=0) [ 0.317535] pci 0000:04:00.5: BAR 0: reserving [mem 0xf9afd000-0xf9afdfff flags 0x40200] (d=0, p=0) [ 0.317535] pci 0000:04:00.6: BAR 0: reserving [mem 0xf9afe000-0xf9afefff flags 0x40200] (d=0, p=0) [ 0.317535] pci 0000:04:00.7: BAR 0: reserving [mem 0xf9aff000-0xf9afffff flags 0x40200] (d=0, p=0) [ 0.317535] pci 0000:03:06.0: BAR 0: reserving [io 0xa800-0xa8ff flags 0x40101] (d=0, p=0) [ 0.317535] pci 0000:05:00.0: BAR 0: reserving [mem 0xb0000000-0xbfffffff flags 0x14220c] (d=1, p=1) [ 0.317535] pci 0000:05:00.0: BAR 2: reserving [mem 0xf9be0000-0xf9beffff flags 0x140204] (d=1, p=1) [ 0.317535] pci 0000:05:00.0: BAR 4: reserving [io 0xb000-0xb0ff flags 0x40101] (d=1, p=1) [ 0.317535] reserve RAM buffer: 000000000009f000 - 000000000009ffff [ 0.320044] NetLabel: Initializing [ 0.320047] NetLabel: domain hash size = 128 [ 0.320050] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.320067] NetLabel: unlabeled traffic allowed by default [ 0.320139] Switching to clocksource xen [ 0.320154] Switched to NOHz mode on CPU #2 [ 0.320550] Switched to NOHz mode on CPU #3 [ 0.320855] Switched to NOHz mode on CPU #4 [ 0.321139] Switched to NOHz mode on CPU #5 [ 0.323699] Switched to NOHz mode on CPU #0 [ 0.323987] Switched to NOHz mode on CPU #1 [ 0.325296] xen-pciback: wants to seize 0000:03:06.0 [ 0.325299] xen-pciback: wants to seize 0000:04:00.0 [ 0.325301] xen-pciback: wants to seize 0000:04:00.1 [ 0.325303] xen-pciback: wants to seize 0000:04:00.2 [ 0.325305] xen-pciback: wants to seize 0000:04:00.3 [ 0.325306] xen-pciback: wants to seize 0000:04:00.4 [ 0.325309] xen-pciback: wants to seize 0000:04:00.5 [ 0.325311] xen-pciback: wants to seize 0000:04:00.6 [ 0.325320] xen-pciback: wants to seize 0000:04:00.7 [ 0.325322] xen-pciback: wants to seize 0000:0a:00.0 [ 0.325324] xen-pciback: wants to seize 0000:0a:00.1 [ 0.325325] xen-pciback: wants to seize 0000:0a:00.2 [ 0.325327] xen-pciback: wants to seize 0000:0a:00.3 [ 0.325329] xen-pciback: wants to seize 0000:0a:00.4 [ 0.325330] xen-pciback: wants to seize 0000:0a:00.5 [ 0.325332] xen-pciback: wants to seize 0000:0a:00.6 [ 0.325334] xen-pciback: wants to seize 0000:0a:00.7 [ 0.325336] xen-pciback: wants to seize 0000:05:00.0 [ 0.325337] xen-pciback: wants to seize 0000:05:00.1 [ 0.325339] xen-pciback: wants to seize 0000:07:01.0 [ 0.325341] xen-pciback: wants to seize 0000:07:01.1 [ 0.325343] xen-pciback: wants to seize 0000:07:01.2 [ 0.325355] pciback 0000:00:00.0: probing... [ 0.325362] pciback 0000:00:00.2: probing... [ 0.325367] pciback 0000:00:02.0: probing... [ 0.325372] pciback 0000:00:03.0: probing... [ 0.325377] pciback 0000:00:05.0: probing... [ 0.325381] pciback 0000:00:06.0: probing... [ 0.325387] pciback 0000:00:0a.0: probing... [ 0.325392] pciback 0000:00:0b.0: probing... [ 0.325397] pciback 0000:00:0d.0: probing... [ 0.325409] pciback 0000:00:11.0: probing... [ 0.325413] pciback 0000:00:12.0: probing... [ 0.325418] pciback 0000:00:12.2: probing... [ 0.325423] pciback 0000:00:13.0: probing... [ 0.325427] pciback 0000:00:13.2: probing... [ 0.325431] pciback 0000:00:14.0: probing... [ 0.325436] pciback 0000:00:14.1: probing... [ 0.325440] pciback 0000:00:14.3: probing... [ 0.325445] pciback 0000:00:14.4: probing... [ 0.325450] pciback 0000:00:14.5: probing... [ 0.325454] pciback 0000:00:15.0: probing... [ 0.325459] pciback 0000:00:16.0: probing... [ 0.325463] pciback 0000:00:16.2: probing... [ 0.325467] pciback 0000:00:18.0: probing... [ 0.325472] pciback 0000:00:18.1: probing... [ 0.325476] pciback 0000:00:18.2: probing... [ 0.325480] pciback 0000:00:18.3: probing... [ 0.325484] pciback 0000:00:18.4: probing... [ 0.325496] pciback 0000:0b:00.0: probing... [ 0.325501] pciback 0000:0a:00.0: probing... [ 0.325503] pciback 0000:0a:00.0: seizing device [ 0.325507] pciback 0000:0a:00.0: pcistub_device_alloc [ 0.325509] pciback 0000:0a:00.0: deferring initialization [ 0.325513] pciback 0000:0a:00.1: probing... [ 0.325515] pciback 0000:0a:00.1: seizing device [ 0.325517] pciback 0000:0a:00.1: pcistub_device_alloc [ 0.325519] pciback 0000:0a:00.1: deferring initialization [ 0.325522] pciback 0000:0a:00.2: probing... [ 0.325524] pciback 0000:0a:00.2: seizing device [ 0.325526] pciback 0000:0a:00.2: pcistub_device_alloc [ 0.325528] pciback 0000:0a:00.2: deferring initialization [ 0.325531] pciback 0000:0a:00.3: probing... [ 0.325533] pciback 0000:0a:00.3: seizing device [ 0.325535] pciback 0000:0a:00.3: pcistub_device_alloc [ 0.325537] pciback 0000:0a:00.3: deferring initialization [ 0.325541] pciback 0000:0a:00.4: probing... [ 0.325542] pciback 0000:0a:00.4: seizing device [ 0.325545] pciback 0000:0a:00.4: pcistub_device_alloc [ 0.325546] pciback 0000:0a:00.4: deferring initialization [ 0.325550] pciback 0000:0a:00.5: probing... [ 0.325551] pciback 0000:0a:00.5: seizing device [ 0.325554] pciback 0000:0a:00.5: pcistub_device_alloc [ 0.325555] pciback 0000:0a:00.5: deferring initialization [ 0.325560] pciback 0000:0a:00.6: probing... [ 0.325562] pciback 0000:0a:00.6: seizing device [ 0.325564] pciback 0000:0a:00.6: pcistub_device_alloc [ 0.325566] pciback 0000:0a:00.6: deferring initialization [ 0.325570] pciback 0000:0a:00.7: probing... [ 0.325572] pciback 0000:0a:00.7: seizing device [ 0.325574] pciback 0000:0a:00.7: pcistub_device_alloc [ 0.325610] pciback 0000:0a:00.7: deferring initialization [ 0.325614] pciback 0000:09:00.0: probing... [ 0.325619] pciback 0000:08:00.0: probing... [ 0.325624] pciback 0000:06:00.0: probing... [ 0.325629] pciback 0000:07:01.0: probing... [ 0.325632] pciback 0000:07:01.0: seizing device [ 0.325634] pciback 0000:07:01.0: pcistub_device_alloc [ 0.325637] pciback 0000:07:01.0: deferring initialization [ 0.325641] pciback 0000:07:01.1: probing... [ 0.325643] pciback 0000:07:01.1: seizing device [ 0.325646] pciback 0000:07:01.1: pcistub_device_alloc [ 0.325647] pciback 0000:07:01.1: deferring initialization [ 0.325652] pciback 0000:07:01.2: probing... [ 0.325654] pciback 0000:07:01.2: seizing device [ 0.325660] pciback 0000:07:01.2: pcistub_device_alloc [ 0.325662] pciback 0000:07:01.2: deferring initialization [ 0.325667] pciback 0000:05:00.0: probing... [ 0.325668] pciback 0000:05:00.0: seizing device [ 0.325671] pciback 0000:05:00.0: pcistub_device_alloc [ 0.325673] pciback 0000:05:00.0: deferring initialization [ 0.325677] pciback 0000:05:00.1: probing... [ 0.325678] pciback 0000:05:00.1: seizing device [ 0.325681] pciback 0000:05:00.1: pcistub_device_alloc [ 0.325683] pciback 0000:05:00.1: deferring initialization [ 0.325687] pciback 0000:04:00.0: probing... [ 0.325688] pciback 0000:04:00.0: seizing device [ 0.325691] pciback 0000:04:00.0: pcistub_device_alloc [ 0.325692] pciback 0000:04:00.0: deferring initialization [ 0.325696] pciback 0000:04:00.1: probing... [ 0.325698] pciback 0000:04:00.1: seizing device [ 0.325700] pciback 0000:04:00.1: pcistub_device_alloc [ 0.325702] pciback 0000:04:00.1: deferring initialization [ 0.325706] pciback 0000:04:00.2: probing... [ 0.325707] pciback 0000:04:00.2: seizing device [ 0.325710] pciback 0000:04:00.2: pcistub_device_alloc [ 0.325712] pciback 0000:04:00.2: deferring initialization [ 0.325715] pciback 0000:04:00.3: probing... [ 0.325717] pciback 0000:04:00.3: seizing device [ 0.325719] pciback 0000:04:00.3: pcistub_device_alloc [ 0.325721] pciback 0000:04:00.3: deferring initialization [ 0.325725] pciback 0000:04:00.4: probing... [ 0.325727] pciback 0000:04:00.4: seizing device [ 0.325729] pciback 0000:04:00.4: pcistub_device_alloc [ 0.325731] pciback 0000:04:00.4: deferring initialization [ 0.325735] pciback 0000:04:00.5: probing... [ 0.325736] pciback 0000:04:00.5: seizing device [ 0.325739] pciback 0000:04:00.5: pcistub_device_alloc [ 0.325740] pciback 0000:04:00.5: deferring initialization [ 0.325744] pciback 0000:04:00.6: probing... [ 0.325746] pciback 0000:04:00.6: seizing device [ 0.325749] pciback 0000:04:00.6: pcistub_device_alloc [ 0.325757] pciback 0000:04:00.6: deferring initialization [ 0.325761] pciback 0000:04:00.7: probing... [ 0.325763] pciback 0000:04:00.7: seizing device [ 0.325766] pciback 0000:04:00.7: pcistub_device_alloc [ 0.325767] pciback 0000:04:00.7: deferring initialization [ 0.325771] pciback 0000:03:06.0: probing... [ 0.325773] pciback 0000:03:06.0: seizing device [ 0.325775] pciback 0000:03:06.0: pcistub_device_alloc [ 0.325777] pciback 0000:03:06.0: deferring initialization [ 0.325940] pnp: PnP ACPI init [ 0.325953] ACPI: bus type pnp registered [ 0.326103] pnp 00:00: [bus 00-ff] [ 0.326105] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.326107] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.326109] pnp 00:00: [io 0x0d00-0xffff window] [ 0.326111] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.326112] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.326114] pnp 00:00: [mem 0xb0000000-0xdfffffff window] [ 0.326116] pnp 00:00: [mem 0xf0000000-0xfebfffff window] [ 0.326255] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.326367] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.326369] pnp 00:01: [mem 0xfec20000-0xfec200ff] [ 0.326487] system 00:01: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.326491] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.326545] pnp 00:02: [mem 0xf6000000-0xf6003fff] [ 0.326625] system 00:02: [mem 0xf6000000-0xf6003fff] has been reserved [ 0.326630] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.440153] pnp 00:03: [dma 4] [ 0.440155] pnp 00:03: [io 0x0000-0x000f] [ 0.440157] pnp 00:03: [io 0x0081-0x0083] [ 0.440159] pnp 00:03: [io 0x0087] [ 0.440160] pnp 00:03: [io 0x0089-0x008b] [ 0.440161] pnp 00:03: [io 0x008f] [ 0.440163] pnp 00:03: [io 0x00c0-0x00df] [ 0.440279] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.440289] pnp 00:04: [io 0x0070-0x0071] [ 0.440292] xen: registering gsi 8 triggering 1 polarity 0 [ 0.440295] xen_map_pirq_gsi: returning irq 8 for gsi 8 [ 0.440298] xen: --> pirq=8 -> irq=8 [ 0.440332] pnp 00:04: [irq 8] [ 0.440411] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.440455] pnp 00:05: [io 0x0061] [ 0.440531] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.440539] pnp 00:06: [io 0x00f0-0x00ff] [ 0.440541] xen: registering gsi 13 triggering 1 polarity 0 [ 0.440543] xen_map_pirq_gsi: returning irq 13 for gsi 13 [ 0.440546] xen: --> pirq=13 -> irq=13 [ 0.440562] pnp 00:06: [irq 13] [ 0.440643] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.440905] pnp 00:07: [io 0x03f8-0x03ff] [ 0.440907] xen: registering gsi 4 triggering 1 polarity 0 [ 0.440909] xen_map_pirq_gsi: returning irq 4 for gsi 4 [ 0.440912] xen: --> pirq=4 -> irq=4 [ 0.440914] Already setup the GSI :4 [ 0.440916] pnp 00:07: [irq 4] [ 0.440918] pnp 00:07: [dma 0 disabled] [ 0.441047] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.441159] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled] [ 0.441161] pnp 00:08: [io 0x0600-0x06df] [ 0.441163] pnp 00:08: [io 0x0ae0-0x0aef] [ 0.441266] system 00:08: [io 0x0600-0x06df] has been reserved [ 0.441277] system 00:08: [io 0x0ae0-0x0aef] has been reserved [ 0.441281] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.441307] pnp 00:09: [mem 0xfed00000-0xfed003ff] [ 0.441378] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.441473] pnp 00:0a: [io 0x0060] [ 0.441474] pnp 00:0a: [io 0x0064] [ 0.441476] pnp 00:0a: [mem 0xfec00000-0xfec00fff] [ 0.441478] pnp 00:0a: [mem 0xfee00000-0xfee00fff] [ 0.441639] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.441643] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.441648] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.441841] pnp 00:0b: [io 0x0010-0x001f] [ 0.441843] pnp 00:0b: [io 0x0022-0x003f] [ 0.441845] pnp 00:0b: [io 0x0062-0x0063] [ 0.441846] pnp 00:0b: [io 0x0065-0x006f] [ 0.441848] pnp 00:0b: [io 0x0072-0x007f] [ 0.441850] pnp 00:0b: [io 0x0080] [ 0.441851] pnp 00:0b: [io 0x0084-0x0086] [ 0.441853] pnp 00:0b: [io 0x0088] [ 0.441855] pnp 00:0b: [io 0x008c-0x008e] [ 0.441856] pnp 00:0b: [io 0x0090-0x009f] [ 0.441858] pnp 00:0b: [io 0x00a2-0x00bf] [ 0.441860] pnp 00:0b: [io 0x00b1] [ 0.441861] pnp 00:0b: [io 0x00e0-0x00ef] [ 0.441863] pnp 00:0b: [io 0x04d0-0x04d1] [ 0.441865] pnp 00:0b: [io 0x040b] [ 0.441866] pnp 00:0b: [io 0x04d6] [ 0.441868] pnp 00:0b: [io 0x0c00-0x0c01] [ 0.441869] pnp 00:0b: [io 0x0c14] [ 0.441871] pnp 00:0b: [io 0x0c50-0x0c51] [ 0.441873] pnp 00:0b: [io 0x0c52] [ 0.441874] pnp 00:0b: [io 0x0c6c] [ 0.441883] pnp 00:0b: [io 0x0c6f] [ 0.441885] pnp 00:0b: [io 0x0cd0-0x0cd1] [ 0.441886] pnp 00:0b: [io 0x0cd2-0x0cd3] [ 0.441888] pnp 00:0b: [io 0x0cd4-0x0cd5] [ 0.441890] pnp 00:0b: [io 0x0cd6-0x0cd7] [ 0.441891] pnp 00:0b: [io 0x0cd8-0x0cdf] [ 0.441893] pnp 00:0b: [io 0x0800-0x089f] [ 0.441895] pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled] [ 0.441897] pnp 00:0b: [io 0x0b00-0x0b1f] [ 0.441898] pnp 00:0b: [io 0x0b20-0x0b3f] [ 0.441900] pnp 00:0b: [io 0x0900-0x090f] [ 0.441904] pnp 00:0b: [io 0x0910-0x091f] [ 0.441905] pnp 00:0b: [io 0xfe00-0xfefe] [ 0.441907] pnp 00:0b: [io 0x0060] [ 0.441909] pnp 00:0b: [io 0x0064] [ 0.441910] pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.441912] pnp 00:0b: [mem 0xffb80000-0xffbfffff] [ 0.441914] pnp 00:0b: [mem 0xfec10000-0xfec1001f] [ 0.441916] pnp 00:0b: [mem 0xfed80000-0xfed80fff] [ 0.441918] pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.442102] system 00:0b: [io 0x04d0-0x04d1] has been reserved [ 0.442106] system 00:0b: [io 0x040b] has been reserved [ 0.442109] system 00:0b: [io 0x04d6] has been reserved [ 0.442112] system 00:0b: [io 0x0c00-0x0c01] has been reserved [ 0.442115] system 00:0b: [io 0x0c14] has been reserved [ 0.442118] system 00:0b: [io 0x0c50-0x0c51] has been reserved [ 0.442121] system 00:0b: [io 0x0c52] has been reserved [ 0.442124] system 00:0b: [io 0x0c6c] has been reserved [ 0.442127] system 00:0b: [io 0x0c6f] has been reserved [ 0.442130] system 00:0b: [io 0x0cd0-0x0cd1] has been reserved [ 0.442133] system 00:0b: [io 0x0cd2-0x0cd3] has been reserved [ 0.442136] system 00:0b: [io 0x0cd4-0x0cd5] has been reserved [ 0.442139] system 00:0b: [io 0x0cd6-0x0cd7] has been reserved [ 0.442142] system 00:0b: [io 0x0cd8-0x0cdf] has been reserved [ 0.442145] system 00:0b: [io 0x0800-0x089f] has been reserved [ 0.442148] system 00:0b: [io 0x0b00-0x0b1f] has been reserved [ 0.442152] system 00:0b: [io 0x0b20-0x0b3f] has been reserved [ 0.442155] system 00:0b: [io 0x0900-0x090f] has been reserved [ 0.442158] system 00:0b: [io 0x0910-0x091f] has been reserved [ 0.442162] system 00:0b: [io 0xfe00-0xfefe] has been reserved [ 0.442165] system 00:0b: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.442169] system 00:0b: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.442172] system 00:0b: [mem 0xfed80000-0xfed80fff] has been reserved [ 0.442176] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.442222] pnp 00:0c: [mem 0xe0000000-0xefffffff] [ 0.442353] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved [ 0.442357] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.442501] pnp 00:0d: [mem 0x00000000-0x0009ffff] [ 0.442503] pnp 00:0d: [mem 0x000c0000-0x000cffff] [ 0.442505] pnp 00:0d: [mem 0x000e0000-0x000fffff] [ 0.442509] pnp 00:0d: [mem 0x00100000-0xafffffff] [ 0.442511] pnp 00:0d: [mem 0xfec00000-0xffffffff] [ 0.442640] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.442644] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.442647] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.442651] system 00:0d: [mem 0x00100000-0xafffffff] could not be reserved [ 0.442661] system 00:0d: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.442665] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.442781] pnp: PnP ACPI: found 14 devices [ 0.442784] ACPI: ACPI bus type pnp unregistered [ 0.449280] PM-Timer failed consistency check (0x0xffffff) - aborting. [ 0.449377] pci 0000:00:02.0: PCI bridge to [bus 0b-0b] [ 0.449381] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.449387] pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfe9fffff] [ 0.449392] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.449400] pci 0000:00:03.0: PCI bridge to [bus 0a-0a] [ 0.449403] pci 0000:00:03.0: bridge window [io disabled] [ 0.449408] pci 0000:00:03.0: bridge window [mem 0xf9f00000-0xf9ffffff] [ 0.449413] pci 0000:00:03.0: bridge window [mem pref disabled] [ 0.449427] pci 0000:00:05.0: PCI bridge to [bus 09-09] [ 0.449431] pci 0000:00:05.0: bridge window [io 0xd000-0xdfff] [ 0.449436] pci 0000:00:05.0: bridge window [mem 0xf9e00000-0xf9efffff] [ 0.449441] pci 0000:00:05.0: bridge window [mem 0xcff00000-0xcfffffff 64bit pref] [ 0.449448] pci 0000:00:06.0: PCI bridge to [bus 08-08] [ 0.449452] pci 0000:00:06.0: bridge window [io 0xc000-0xcfff] [ 0.449457] pci 0000:00:06.0: bridge window [mem 0xf9d00000-0xf9dfffff] [ 0.449462] pci 0000:00:06.0: bridge window [mem 0xcfe00000-0xcfefffff 64bit pref] [ 0.449470] pci 0000:06:00.0: PCI bridge to [bus 07-07] [ 0.449472] pci 0000:06:00.0: bridge window [io disabled] [ 0.449480] pci 0000:06:00.0: bridge window [mem 0xf9c00000-0xf9cfffff] [ 0.449486] pci 0000:06:00.0: bridge window [mem pref disabled] [ 0.449496] pci 0000:00:0a.0: PCI bridge to [bus 06-07] [ 0.449499] pci 0000:00:0a.0: bridge window [io disabled] [ 0.449511] pci 0000:00:0a.0: bridge window [mem 0xf9c00000-0xf9cfffff] [ 0.449516] pci 0000:00:0a.0: bridge window [mem pref disabled] [ 0.449522] pci 0000:00:0b.0: PCI bridge to [bus 05-05] [ 0.449526] pci 0000:00:0b.0: bridge window [io 0xb000-0xbfff] [ 0.449532] pci 0000:00:0b.0: bridge window [mem 0xf9b00000-0xf9bfffff] [ 0.449537] pci 0000:00:0b.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.449544] pci 0000:00:0d.0: PCI bridge to [bus 04-04] [ 0.449546] pci 0000:00:0d.0: bridge window [io disabled] [ 0.449552] pci 0000:00:0d.0: bridge window [mem 0xf9a00000-0xf9afffff] [ 0.449556] pci 0000:00:0d.0: bridge window [mem pref disabled] [ 0.449563] pci 0000:00:14.4: PCI bridge to [bus 03-03] [ 0.449567] pci 0000:00:14.4: bridge window [io 0xa000-0xafff] [ 0.449574] pci 0000:00:14.4: bridge window [mem disabled] [ 0.449579] pci 0000:00:14.4: bridge window [mem pref disabled] [ 0.449594] pci 0000:00:15.0: PCI bridge to [bus 02-02] [ 0.449596] pci 0000:00:15.0: bridge window [io disabled] [ 0.449602] pci 0000:00:15.0: bridge window [mem disabled] [ 0.449607] pci 0000:00:15.0: bridge window [mem pref disabled] [ 0.449620] xen: registering gsi 52 triggering 0 polarity 1 [ 0.449628] xen: --> pirq=52 -> irq=52 [ 0.449648] pci 0000:00:02.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52 [ 0.449655] pci 0000:00:02.0: setting latency timer to 64 [ 0.449661] xen: registering gsi 52 triggering 0 polarity 1 [ 0.449663] xen_map_pirq_gsi: returning irq 52 for gsi 52 [ 0.449666] xen: --> pirq=52 -> irq=52 [ 0.449668] Already setup the GSI :52 [ 0.449670] pci 0000:00:03.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52 [ 0.449675] pci 0000:00:03.0: setting latency timer to 64 [ 0.449688] xen: registering gsi 52 triggering 0 polarity 1 [ 0.449690] xen_map_pirq_gsi: returning irq 52 for gsi 52 [ 0.449692] xen: --> pirq=52 -> irq=52 [ 0.449694] Already setup the GSI :52 [ 0.449696] pci 0000:00:05.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52 [ 0.449701] pci 0000:00:05.0: setting latency timer to 64 [ 0.449707] xen: registering gsi 53 triggering 0 polarity 1 [ 0.449713] xen: --> pirq=53 -> irq=53 [ 0.449726] pci 0000:00:06.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53 [ 0.449732] pci 0000:00:06.0: setting latency timer to 64 [ 0.449738] xen: registering gsi 54 triggering 0 polarity 1 [ 0.449742] xen: --> pirq=54 -> irq=54 [ 0.449755] pci 0000:00:0a.0: PCI INT A -> GSI 54 (level, low) -> IRQ 54 [ 0.449761] pci 0000:00:0a.0: setting latency timer to 64 [ 0.449778] pci 0000:06:00.0: setting latency timer to 64 [ 0.449785] xen: registering gsi 54 triggering 0 polarity 1 [ 0.449786] xen_map_pirq_gsi: returning irq 54 for gsi 54 [ 0.449789] xen: --> pirq=54 -> irq=54 [ 0.449791] Already setup the GSI :54 [ 0.449793] pci 0000:00:0b.0: PCI INT A -> GSI 54 (level, low) -> IRQ 54 [ 0.449798] pci 0000:00:0b.0: setting latency timer to 64 [ 0.449803] xen: registering gsi 54 triggering 0 polarity 1 [ 0.449805] xen_map_pirq_gsi: returning irq 54 for gsi 54 [ 0.449807] xen: --> pirq=54 -> irq=54 [ 0.449809] Already setup the GSI :54 [ 0.449812] pci 0000:00:0d.0: PCI INT A -> GSI 54 (level, low) -> IRQ 54 [ 0.449817] pci 0000:00:0d.0: setting latency timer to 64 [ 0.449828] xen: registering gsi 16 triggering 0 polarity 1 [ 0.449832] xen: --> pirq=16 -> irq=16 [ 0.449854] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.449860] pci 0000:00:15.0: setting latency timer to 64 [ 0.449864] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.449867] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.449869] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.449870] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.449872] pci_bus 0000:00: resource 8 [mem 0xb0000000-0xdfffffff] [ 0.449874] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff] [ 0.449876] pci_bus 0000:0b: resource 0 [io 0xe000-0xefff] [ 0.449878] pci_bus 0000:0b: resource 1 [mem 0xfa000000-0xfe9fffff] [ 0.449880] pci_bus 0000:0b: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.449883] pci_bus 0000:0a: resource 1 [mem 0xf9f00000-0xf9ffffff] [ 0.449885] pci_bus 0000:09: resource 0 [io 0xd000-0xdfff] [ 0.449886] pci_bus 0000:09: resource 1 [mem 0xf9e00000-0xf9efffff] [ 0.449888] pci_bus 0000:09: resource 2 [mem 0xcff00000-0xcfffffff 64bit pref] [ 0.449891] pci_bus 0000:08: resource 0 [io 0xc000-0xcfff] [ 0.449893] pci_bus 0000:08: resource 1 [mem 0xf9d00000-0xf9dfffff] [ 0.449895] pci_bus 0000:08: resource 2 [mem 0xcfe00000-0xcfefffff 64bit pref] [ 0.449897] pci_bus 0000:06: resource 1 [mem 0xf9c00000-0xf9cfffff] [ 0.449899] pci_bus 0000:07: resource 1 [mem 0xf9c00000-0xf9cfffff] [ 0.449901] pci_bus 0000:05: resource 0 [io 0xb000-0xbfff] [ 0.449903] pci_bus 0000:05: resource 1 [mem 0xf9b00000-0xf9bfffff] [ 0.449905] pci_bus 0000:05: resource 2 [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.449907] pci_bus 0000:04: resource 1 [mem 0xf9a00000-0xf9afffff] [ 0.449909] pci_bus 0000:03: resource 0 [io 0xa000-0xafff] [ 0.449911] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] [ 0.449912] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] [ 0.449914] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] [ 0.449916] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff] [ 0.449918] pci_bus 0000:03: resource 8 [mem 0xb0000000-0xdfffffff] [ 0.449920] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff] [ 0.449947] NET: Registered protocol family 2 [ 0.449988] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.450585] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.451706] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.452008] TCP: Hash tables configured (established 262144 bind 65536) [ 0.452012] TCP reno registered [ 0.452023] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.452085] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.452212] NET: Registered protocol family 1 [ 0.452374] RPC: Registered udp transport module. [ 0.452377] RPC: Registered tcp transport module. [ 0.452380] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.452391] pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x30 [ 0.452395] pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x4f5 [ 0.452399] pci 0000:00:00.0: calling pci_fixup_video+0x0/0xb6 [ 0.452407] pci 0000:00:00.2: calling quirk_cardbus_legacy+0x0/0x30 [ 0.452410] pci 0000:00:00.2: calling quirk_usb_early_handoff+0x0/0x4f5 [ 0.452412] pci 0000:00:00.2: calling pci_fixup_video+0x0/0xb6 [ 0.452416] pci 0000:00:02.0: calling quirk_cardbus_legacy+0x0/0x30 [ 0.452419] pci 0000:00:02.0: calling quirk_usb_early_handoff+0x0/0x4f5 [ 0.452421] pci 0000:00:02.0: calling pci_fixup_video+0x0/0xb6 [ 0.452426] pci 0000:00:03.0: calling quirk_cardbus_legacy+0x0/0x30 [ 0.452428] pci 0000:00:03.0: calling quirk_usb_early_handoff+0x0/0x4f5 [ 0.452430] pci 0000:00:03.0: calling pci_fixup_video+0x0/0xb6 [ 0.452434] pci 0000:00:05.0: calling quirk_cardbus_legacy+0x0/0x30 [ 0.452437] pci 0000:00:05.0: calling quirk_usb_early_handoff+0x0/0x4f5 [ 0.452439] pci 0000:00:05.0: calling pci_fixup_video+0x0/0xb6 [ 0.452443] pci 0000:00:06.0: calling quirk_cardbus_legacy+0x0/0x30 [ 0.452445] pci 0000:00:06.0: calling quirk_usb_early_handoff+0x0/0x4f5 [ 0.452454] pci 0000:00:06.0: calling pci_fixup_video+0x0/0xb6 [ 0.452458] pci 0000:00:0a.0: calling quirk_cardbus_legacy+0x0/0x30 [ 0.452461] pci 0000:00:0a.0: calling quirk_usb_early_handoff+0x0/0x4f5 [ 0.452463] pci 0000:00:0a.0: calling pci_fixup_video+0x0/0xb6 [ 0.452467] pci 0000:00:0b.0: calling quirk_cardbus_legacy+0x0/0x30 [ 0.452469] pci 0000:00:0b.0: calling quirk_usb_early_handoff+0x0/0x4f5 [ 0.452472] pci 0000:00:0b.0: calling pci_fixup_video+0x0/0xb6 [ 0.452476] pci 0000:00:0d.0: calling quirk_cardbus_legacy+0x0/0x30 [ 0.452478] pci 0000:00:0d.0: calling quirk_usb_early_handoff+0x0/0x4f5 [ 0.452480] pci 0000:00:0d.0: calling pci_fixup_video+0x0/0xb6 [ 0.452485] pci 0000:00:11.0: calling quirk_msi_intx_disable_ati_bug+0x0/0x46 [ 0.452490] pci 0000:00:11.0: calling quirk_cardbus_legacy+0x0/0x30 [ 0.452493] pci 0000:00:11.0: calling quirk_usb_early_handoff+0x0/0x4f5 [ 0.452497] pci 0000:00:11.0: calling pci_fixup_video+0x0/0xb6 [ 0.452502] pci 0000:00:12.0: calling quirk_cardbus_legacy+0x0/0x30 [ 0.452504] pci 0000:00:12.0: calling quirk_usb_early_handoff+0x0/0x4f5 [ 1.216164] pci 0000:00:12.0: calling pci_fixup_video+0x0/0xb6 [ 1.216173] pci 0000:00:12.2: calling quirk_cardbus_legacy+0x0/0x30 [ 1.216176] pci 0000:00:12.2: calling quirk_usb_early_handoff+0x0/0x4f5 [ 1.216290] pci 0000:00:12.2: calling pci_fixup_video+0x0/0xb6 [ 1.216304] pci 0000:00:13.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.216306] pci 0000:00:13.0: calling quirk_usb_early_handoff+0x0/0x4f5 [ 1.244157] pci 0000:00:13.0: calling pci_fixup_video+0x0/0xb6 [ 1.244168] pci 0000:00:13.2: calling quirk_cardbus_legacy+0x0/0x30 [ 1.244170] pci 0000:00:13.2: calling quirk_usb_early_handoff+0x0/0x4f5 [ 1.244284] pci 0000:00:13.2: calling pci_fixup_video+0x0/0xb6 [ 1.244297] pci 0000:00:14.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.244300] pci 0000:00:14.0: calling quirk_usb_early_handoff+0x0/0x4f5 [ 1.244302] pci 0000:00:14.0: calling pci_fixup_video+0x0/0xb6 [ 1.244307] pci 0000:00:14.1: calling quirk_cardbus_legacy+0x0/0x30 [ 1.244309] pci 0000:00:14.1: calling quirk_usb_early_handoff+0x0/0x4f5 [ 1.244311] pci 0000:00:14.1: calling pci_fixup_video+0x0/0xb6 [ 1.244316] pci 0000:00:14.3: calling quirk_cardbus_legacy+0x0/0x30 [ 1.244318] pci 0000:00:14.3: calling quirk_usb_early_handoff+0x0/0x4f5 [ 1.244321] pci 0000:00:14.3: calling pci_fixup_video+0x0/0xb6 [ 1.244325] pci 0000:00:14.4: calling quirk_cardbus_legacy+0x0/0x30 [ 1.244328] pci 0000:00:14.4: calling quirk_usb_early_handoff+0x0/0x4f5 [ 1.244330] pci 0000:00:14.4: calling pci_fixup_video+0x0/0xb6 [ 1.244335] pci 0000:00:14.5: calling quirk_cardbus_legacy+0x0/0x30 [ 1.244338] pci 0000:00:14.5: calling quirk_usb_early_handoff+0x0/0x4f5 [ 1.272153] pci 0000:00:14.5: calling pci_fixup_video+0x0/0xb6 [ 1.272163] pci 0000:00:15.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.272165] pci 0000:00:15.0: calling quirk_usb_early_handoff+0x0/0x4f5 [ 1.272168] pci 0000:00:15.0: calling pci_fixup_video+0x0/0xb6 [ 1.272172] pci 0000:00:16.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.272174] pci 0000:00:16.0: calling quirk_usb_early_handoff+0x0/0x4f5 [ 1.296146] pci 0000:00:16.0: calling pci_fixup_video+0x0/0xb6 [ 1.296155] pci 0000:00:16.2: calling quirk_cardbus_legacy+0x0/0x30 [ 1.296157] pci 0000:00:16.2: calling quirk_usb_early_handoff+0x0/0x4f5 [ 1.296287] pci 0000:00:16.2: calling pci_fixup_video+0x0/0xb6 [ 1.296293] pci 0000:00:18.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.296295] pci 0000:00:18.0: calling quirk_usb_early_handoff+0x0/0x4f5 [ 1.296298] pci 0000:00:18.0: calling pci_fixup_video+0x0/0xb6 [ 1.296302] pci 0000:00:18.1: calling quirk_cardbus_legacy+0x0/0x30 [ 1.296304] pci 0000:00:18.1: calling quirk_usb_early_handoff+0x0/0x4f5 [ 1.296307] pci 0000:00:18.1: calling pci_fixup_video+0x0/0xb6 [ 1.296311] pci 0000:00:18.2: calling quirk_cardbus_legacy+0x0/0x30 [ 1.296313] pci 0000:00:18.2: calling quirk_usb_early_handoff+0x0/0x4f5 [ 1.296315] pci 0000:00:18.2: calling pci_fixup_video+0x0/0xb6 [ 1.296319] pci 0000:00:18.3: calling quirk_cardbus_legacy+0x0/0x30 [ 1.296322] pci 0000:00:18.3: calling quirk_usb_early_handoff+0x0/0x4f5 [ 1.296324] pci 0000:00:18.3: calling pci_fixup_video+0x0/0xb6 [ 1.296328] pci 0000:00:18.4: calling quirk_cardbus_legacy+0x0/0x30 [ 1.296331] pci 0000:00:18.4: calling quirk_usb_early_handoff+0x0/0x4f5 [ 1.296333] pci 0000:00:18.4: calling pci_fixup_video+0x0/0xb6 [ 1.296337] pci 0000:0b:00.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x12 [ 1.296351] pci 0000:0b:00.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.296361] pci 0000:0b:00.0: calling quirk_usb_early_handoff+0x0/0x4f5 [ 1.296363] pci 0000:0b:00.0: calling pci_fixup_video+0x0/0xb6 [ 1.296368] pci 0000:0b:00.0: Boot video device [ 1.296379] pciback 0000:0a:00.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.296384] pciback 0000:0a:00.0: calling quirk_usb_early_handoff+0x0/0x4f5 [ 1.296419] pciback 0000:0a:00.0: calling pci_fixup_video+0x0/0xb6 [ 1.296425] pciback 0000:0a:00.1: calling quirk_cardbus_legacy+0x0/0x30 [ 1.296428] pciback 0000:0a:00.1: calling quirk_usb_early_handoff+0x0/0x4f5 [ 1.296465] pciback 0000:0a:00.1: calling pci_fixup_video+0x0/0xb6 [ 1.296472] pciback 0000:0a:00.2: calling quirk_cardbus_legacy+0x0/0x30 [ 1.296474] pciback 0000:0a:00.2: calling quirk_usb_early_handoff+0x0/0x4f5 [ 1.296502] pciback 0000:0a:00.2: calling pci_fixup_video+0x0/0xb6 [ 1.296508] pciback 0000:0a:00.3: calling quirk_cardbus_legacy+0x0/0x30 [ 1.296510] pciback 0000:0a:00.3: calling quirk_usb_early_handoff+0x0/0x4f5 [ 1.296542] pciback 0000:0a:00.3: calling pci_fixup_video+0x0/0xb6 [ 1.296549] pciback 0000:0a:00.4: calling quirk_cardbus_legacy+0x0/0x30 [ 1.296552] pciback 0000:0a:00.4: calling quirk_usb_early_handoff+0x0/0x4f5 [ 1.296579] pciback 0000:0a:00.4: calling pci_fixup_video+0x0/0xb6 [ 1.296585] pciback 0000:0a:00.5: calling quirk_cardbus_legacy+0x0/0x30 [ 1.296588] pciback 0000:0a:00.5: calling quirk_usb_early_handoff+0x0/0x4f5 [ 1.296653] pciback 0000:0a:00.5: calling pci_fixup_video+0x0/0xb6 [ 1.296660] pciback 0000:0a:00.6: calling quirk_cardbus_legacy+0x0/0x30 [ 1.296662] pciback 0000:0a:00.6: calling quirk_usb_early_handoff+0x0/0x4f5 [ 1.296690] pciback 0000:0a:00.6: calling pci_fixup_video+0x0/0xb6 [ 1.296696] pciback 0000:0a:00.7: calling quirk_cardbus_legacy+0x0/0x30 [ 1.296698] pciback 0000:0a:00.7: calling quirk_usb_early_handoff+0x0/0x4f5 [ 1.296729] pciback 0000:0a:00.7: calling pci_fixup_video+0x0/0xb6 [ 1.296735] pci 0000:09:00.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.296738] pci 0000:09:00.0: calling quirk_usb_early_handoff+0x0/0x4f5 [ 1.296740] pci 0000:09:00.0: calling pci_fixup_video+0x0/0xb6 [ 1.296745] pci 0000:08:00.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.296747] pci 0000:08:00.0: calling quirk_usb_early_handoff+0x0/0x4f5 [ 1.296750] pci 0000:08:00.0: calling pci_fixup_video+0x0/0xb6 [ 1.296755] pci 0000:06:00.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.296757] pci 0000:06:00.0: calling quirk_xio2000a+0x0/0x8f [ 1.296760] pci 0000:06:00.0: TI XIO2000a quirk detected; secondary bus fast back-to-back transfers disabled [ 1.296773] pci 0000:06:00.0: calling quirk_usb_early_handoff+0x0/0x4f5 [ 1.296775] pci 0000:06:00.0: calling pci_fixup_video+0x0/0xb6 [ 1.296780] pciback 0000:07:01.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.296783] pciback 0000:07:01.0: calling quirk_usb_early_handoff+0x0/0x4f5 [ 1.296817] pciback 0000:07:01.0: calling pci_fixup_video+0x0/0xb6 [ 1.296824] pciback 0000:07:01.1: calling quirk_cardbus_legacy+0x0/0x30 [ 1.296827] pciback 0000:07:01.1: calling quirk_usb_early_handoff+0x0/0x4f5 [ 1.296854] pciback 0000:07:01.1: calling pci_fixup_video+0x0/0xb6 [ 1.296861] pciback 0000:07:01.2: calling quirk_cardbus_legacy+0x0/0x30 [ 1.296863] pciback 0000:07:01.2: calling quirk_usb_early_handoff+0x0/0x4f5 [ 1.296905] pciback 0000:07:01.2: calling pci_fixup_video+0x0/0xb6 [ 1.296911] pciback 0000:05:00.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.296914] pciback 0000:05:00.0: calling quirk_usb_early_handoff+0x0/0x4f5 [ 1.296916] pciback 0000:05:00.0: calling pci_fixup_video+0x0/0xb6 [ 1.296922] pciback 0000:05:00.1: calling quirk_cardbus_legacy+0x0/0x30 [ 1.296925] pciback 0000:05:00.1: calling quirk_usb_early_handoff+0x0/0x4f5 [ 1.296927] pciback 0000:05:00.1: calling pci_fixup_video+0x0/0xb6 [ 1.296932] pciback 0000:04:00.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.296935] pciback 0000:04:00.0: calling quirk_usb_early_handoff+0x0/0x4f5 [ 1.296969] pciback 0000:04:00.0: calling pci_fixup_video+0x0/0xb6 [ 1.296976] pciback 0000:04:00.1: calling quirk_cardbus_legacy+0x0/0x30 [ 1.296978] pciback 0000:04:00.1: calling quirk_usb_early_handoff+0x0/0x4f5 [ 1.297007] pciback 0000:04:00.1: calling pci_fixup_video+0x0/0xb6 [ 1.297014] pciback 0000:04:00.2: calling quirk_cardbus_legacy+0x0/0x30 [ 1.297016] pciback 0000:04:00.2: calling quirk_usb_early_handoff+0x0/0x4f5 [ 1.297043] pciback 0000:04:00.2: calling pci_fixup_video+0x0/0xb6 [ 1.297057] pciback 0000:04:00.3: calling quirk_cardbus_legacy+0x0/0x30 [ 1.297059] pciback 0000:04:00.3: calling quirk_usb_early_handoff+0x0/0x4f5 [ 1.297089] pciback 0000:04:00.3: calling pci_fixup_video+0x0/0xb6 [ 1.297096] pciback 0000:04:00.4: calling quirk_cardbus_legacy+0x0/0x30 [ 1.297098] pciback 0000:04:00.4: calling quirk_usb_early_handoff+0x0/0x4f5 [ 1.297125] pciback 0000:04:00.4: calling pci_fixup_video+0x0/0xb6 [ 1.297139] pciback 0000:04:00.5: calling quirk_cardbus_legacy+0x0/0x30 [ 1.297141] pciback 0000:04:00.5: calling quirk_usb_early_handoff+0x0/0x4f5 [ 1.297171] pciback 0000:04:00.5: calling pci_fixup_video+0x0/0xb6 [ 1.297178] pciback 0000:04:00.6: calling quirk_cardbus_legacy+0x0/0x30 [ 1.297180] pciback 0000:04:00.6: calling quirk_usb_early_handoff+0x0/0x4f5 [ 1.297208] pciback 0000:04:00.6: calling pci_fixup_video+0x0/0xb6 [ 1.297214] pciback 0000:04:00.7: calling quirk_cardbus_legacy+0x0/0x30 [ 1.297217] pciback 0000:04:00.7: calling quirk_usb_early_handoff+0x0/0x4f5 [ 1.297254] pciback 0000:04:00.7: calling pci_fixup_video+0x0/0xb6 [ 1.297260] pciback 0000:03:06.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.297263] pciback 0000:03:06.0: calling quirk_usb_early_handoff+0x0/0x4f5 [ 1.297266] pciback 0000:03:06.0: calling pci_fixup_video+0x0/0xb6 [ 1.297270] PCI: CLS 64 bytes, default 64 [ 1.297328] Trying to unpack rootfs image as initramfs... [ 1.307577] Freeing initrd memory: 10012k freed [ 1.310601] kvm: no hardware support [ 1.310612] has_svm: svm not available [ 1.310614] kvm: no hardware support [ 1.312518] audit: initializing netlink socket (disabled) [ 1.312534] type=2000 audit(1305912075.295:1): initialized [ 1.313179] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.317106] VFS: Disk quotas dquot_6.5.2 [ 1.317222] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.318472] fuse init (API version 7.16) [ 1.318959] Btrfs loaded [ 1.318964] msgmni has been set to 1109 [ 1.319048] SELinux: Registering netfilter hooks [ 1.319641] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.319646] io scheduler noop registered [ 1.319648] io scheduler deadline registered [ 1.319720] io scheduler cfq registered (default) [ 1.319880] pcieport 0000:00:02.0: setting latency timer to 64 [ 1.320050] pcieport 0000:00:03.0: setting latency timer to 64 [ 1.320248] pcieport 0000:00:05.0: setting latency timer to 64 [ 1.320419] pcieport 0000:00:06.0: setting latency timer to 64 [ 1.320569] pcieport 0000:00:0a.0: setting latency timer to 64 [ 1.320744] pcieport 0000:00:0b.0: setting latency timer to 64 [ 1.320892] pcieport 0000:00:0d.0: setting latency timer to 64 [ 1.321031] pcieport 0000:00:15.0: setting latency timer to 64 [ 1.321351] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 1.321356] pci 0000:0b:00.0: Signaling PME through PCIe PME interrupt [ 1.321361] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded [ 1.321378] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt [ 1.321381] pciback 0000:0a:00.0: Signaling PME through PCIe PME interrupt [ 1.321384] pciback 0000:0a:00.1: Signaling PME through PCIe PME interrupt [ 1.321387] pciback 0000:0a:00.2: Signaling PME through PCIe PME interrupt [ 1.321390] pciback 0000:0a:00.3: Signaling PME through PCIe PME interrupt [ 1.321394] pciback 0000:0a:00.4: Signaling PME through PCIe PME interrupt [ 1.321396] pciback 0000:0a:00.5: Signaling PME through PCIe PME interrupt [ 1.321407] pciback 0000:0a:00.6: Signaling PME through PCIe PME interrupt [ 1.321409] pciback 0000:0a:00.7: Signaling PME through PCIe PME interrupt [ 1.321414] pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded [ 1.321429] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt [ 1.321432] pci 0000:09:00.0: Signaling PME through PCIe PME interrupt [ 1.321437] pcie_pme 0000:00:05.0:pcie01: service driver pcie_pme loaded [ 1.321451] pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt [ 1.321454] pci 0000:08:00.0: Signaling PME through PCIe PME interrupt [ 1.321459] pcie_pme 0000:00:06.0:pcie01: service driver pcie_pme loaded [ 1.321474] pcieport 0000:00:0a.0: Signaling PME through PCIe PME interrupt [ 1.321479] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt [ 1.321489] pciback 0000:07:01.0: Signaling PME through PCIe PME interrupt [ 1.321492] pciback 0000:07:01.1: Signaling PME through PCIe PME interrupt [ 1.321495] pciback 0000:07:01.2: Signaling PME through PCIe PME interrupt [ 1.321500] pcie_pme 0000:00:0a.0:pcie01: service driver pcie_pme loaded [ 1.321515] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt [ 1.321518] pciback 0000:05:00.0: Signaling PME through PCIe PME interrupt [ 1.321521] pciback 0000:05:00.1: Signaling PME through PCIe PME interrupt [ 1.321526] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded [ 1.321540] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt [ 1.321543] pciback 0000:04:00.0: Signaling PME through PCIe PME interrupt [ 1.321546] pciback 0000:04:00.1: Signaling PME through PCIe PME interrupt [ 1.321549] pciback 0000:04:00.2: Signaling PME through PCIe PME interrupt [ 1.321552] pciback 0000:04:00.3: Signaling PME through PCIe PME interrupt [ 1.321555] pciback 0000:04:00.4: Signaling PME through PCIe PME interrupt [ 1.321558] pciback 0000:04:00.5: Signaling PME through PCIe PME interrupt [ 1.321561] pciback 0000:04:00.6: Signaling PME through PCIe PME interrupt [ 1.321564] pciback 0000:04:00.7: Signaling PME through PCIe PME interrupt [ 1.321569] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded [ 1.321621] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt [ 1.321627] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded [ 1.321761] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.321887] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.321891] xen-pciback: pcistub_init_devices_late [ 1.321893] pciback 0000:03:06.0: initializing... [ 1.321895] pciback 0000:03:06.0: initializing config [ 1.321897] pciback 0000:03:06.0: initializing virtual configuration space [ 1.321899] pciback 0000:03:06.0: added config field at offset 0x00 [ 1.321901] pciback 0000:03:06.0: added config field at offset 0x02 [ 1.321902] pciback 0000:03:06.0: added config field at offset 0x04 [ 1.321904] pciback 0000:03:06.0: added config field at offset 0x3c [ 1.321906] pciback 0000:03:06.0: added config field at offset 0x3d [ 1.321908] pciback 0000:03:06.0: added config field at offset 0x0c [ 1.321909] pciback 0000:03:06.0: added config field at offset 0x0d [ 1.321911] pciback 0000:03:06.0: added config field at offset 0x0f [ 1.321913] pciback 0000:03:06.0: added config field at offset 0x10 [ 1.321915] pciback 0000:03:06.0: added config field at offset 0x14 [ 1.321924] pciback 0000:03:06.0: added config field at offset 0x18 [ 1.321925] pciback 0000:03:06.0: added config field at offset 0x1c [ 1.321927] pciback 0000:03:06.0: added config field at offset 0x20 [ 1.321929] pciback 0000:03:06.0: added config field at offset 0x24 [ 1.321931] pciback 0000:03:06.0: added config field at offset 0x30 [ 1.321946] pciback 0000:03:06.0: Found capability 0x1 at 0xc0 [ 1.321948] pciback 0000:03:06.0: added config field at offset 0xc0 [ 1.321950] pciback 0000:03:06.0: added config field at offset 0xc2 [ 1.321954] pciback 0000:03:06.0: added config field at offset 0xc4 [ 1.321955] pciback 0000:03:06.0: added config field at offset 0xc6 [ 1.321957] pciback 0000:03:06.0: added config field at offset 0xc7 [ 1.321959] pciback 0000:03:06.0: enabling device [ 1.321969] xen: registering gsi 22 triggering 0 polarity 1 [ 1.321975] xen: --> pirq=22 -> irq=22 [ 1.321999] pciback 0000:03:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.322003] pciback 0000:03:06.0: reset device [ 1.322017] pciback 0000:03:06.0: PCI INT A disabled [ 1.322022] pciback 0000:04:00.7: initializing... [ 1.322024] pciback 0000:04:00.7: initializing config [ 1.322025] pciback 0000:04:00.7: initializing virtual configuration space [ 1.322027] pciback 0000:04:00.7: added config field at offset 0x00 [ 1.322029] pciback 0000:04:00.7: added config field at offset 0x02 [ 1.322031] pciback 0000:04:00.7: added config field at offset 0x04 [ 1.322033] pciback 0000:04:00.7: added config field at offset 0x3c [ 1.322034] pciback 0000:04:00.7: added config field at offset 0x3d [ 1.322036] pciback 0000:04:00.7: added config field at offset 0x0c [ 1.322038] pciback 0000:04:00.7: added config field at offset 0x0d [ 1.322040] pciback 0000:04:00.7: added config field at offset 0x0f [ 1.322042] pciback 0000:04:00.7: added config field at offset 0x10 [ 1.322043] pciback 0000:04:00.7: added config field at offset 0x14 [ 1.322045] pciback 0000:04:00.7: added config field at offset 0x18 [ 1.322047] pciback 0000:04:00.7: added config field at offset 0x1c [ 1.322049] pciback 0000:04:00.7: added config field at offset 0x20 [ 1.322051] pciback 0000:04:00.7: added config field at offset 0x24 [ 1.322052] pciback 0000:04:00.7: added config field at offset 0x30 [ 1.322077] pciback 0000:04:00.7: Found capability 0x1 at 0x78 [ 1.322079] pciback 0000:04:00.7: added config field at offset 0x78 [ 1.322080] pciback 0000:04:00.7: added config field at offset 0x7a [ 1.322084] pciback 0000:04:00.7: added config field at offset 0x7c [ 1.322086] pciback 0000:04:00.7: added config field at offset 0x7e [ 1.322088] pciback 0000:04:00.7: added config field at offset 0x7f [ 1.322089] pciback 0000:04:00.7: enabling device [ 1.322102] xen: registering gsi 43 triggering 0 polarity 1 [ 1.322106] xen: --> pirq=43 -> irq=43 [ 1.322119] pciback 0000:04:00.7: PCI INT D -> GSI 43 (level, low) -> IRQ 43 [ 1.322122] pciback 0000:04:00.7: reset device [ 1.322129] pciback 0000:04:00.7: PCI INT D disabled [ 1.322133] pciback 0000:04:00.6: initializing... [ 1.322135] pciback 0000:04:00.6: initializing config [ 1.322137] pciback 0000:04:00.6: initializing virtual configuration space [ 1.322139] pciback 0000:04:00.6: added config field at offset 0x00 [ 1.322140] pciback 0000:04:00.6: added config field at offset 0x02 [ 1.322142] pciback 0000:04:00.6: added config field at offset 0x04 [ 1.322144] pciback 0000:04:00.6: added config field at offset 0x3c [ 1.322146] pciback 0000:04:00.6: added config field at offset 0x3d [ 1.322147] pciback 0000:04:00.6: added config field at offset 0x0c [ 1.322149] pciback 0000:04:00.6: added config field at offset 0x0d [ 1.322151] pciback 0000:04:00.6: added config field at offset 0x0f [ 1.322153] pciback 0000:04:00.6: added config field at offset 0x10 [ 1.322154] pciback 0000:04:00.6: added config field at offset 0x14 [ 1.322156] pciback 0000:04:00.6: added config field at offset 0x18 [ 1.322158] pciback 0000:04:00.6: added config field at offset 0x1c [ 1.322160] pciback 0000:04:00.6: added config field at offset 0x20 [ 1.322162] pciback 0000:04:00.6: added config field at offset 0x24 [ 1.322164] pciback 0000:04:00.6: added config field at offset 0x30 [ 1.322195] pciback 0000:04:00.6: Found capability 0x1 at 0x78 [ 1.322197] pciback 0000:04:00.6: added config field at offset 0x78 [ 1.322199] pciback 0000:04:00.6: added config field at offset 0x7a [ 1.322203] pciback 0000:04:00.6: added config field at offset 0x7c [ 1.322206] pciback 0000:04:00.6: added config field at offset 0x7e [ 1.322208] pciback 0000:04:00.6: added config field at offset 0x7f [ 1.322210] pciback 0000:04:00.6: enabling device [ 1.322216] xen: registering gsi 43 triggering 0 polarity 1 [ 1.322218] xen_map_pirq_gsi: returning irq 43 for gsi 43 [ 1.322220] xen: --> pirq=43 -> irq=43 [ 1.322222] Already setup the GSI :43 [ 1.322225] pciback 0000:04:00.6: PCI INT D -> GSI 43 (level, low) -> IRQ 43 [ 1.322227] pciback 0000:04:00.6: reset device [ 1.322233] pciback 0000:04:00.6: PCI INT D disabled [ 1.322238] pciback 0000:04:00.5: initializing... [ 1.322239] pciback 0000:04:00.5: initializing config [ 1.322241] pciback 0000:04:00.5: initializing virtual configuration space [ 1.322243] pciback 0000:04:00.5: added config field at offset 0x00 [ 1.322244] pciback 0000:04:00.5: added config field at offset 0x02 [ 1.322246] pciback 0000:04:00.5: added config field at offset 0x04 [ 1.322248] pciback 0000:04:00.5: added config field at offset 0x3c [ 1.322250] pciback 0000:04:00.5: added config field at offset 0x3d [ 1.322251] pciback 0000:04:00.5: added config field at offset 0x0c [ 1.322253] pciback 0000:04:00.5: added config field at offset 0x0d [ 1.322255] pciback 0000:04:00.5: added config field at offset 0x0f [ 1.322257] pciback 0000:04:00.5: added config field at offset 0x10 [ 1.322258] pciback 0000:04:00.5: added config field at offset 0x14 [ 1.322260] pciback 0000:04:00.5: added config field at offset 0x18 [ 1.322262] pciback 0000:04:00.5: added config field at offset 0x1c [ 1.322264] pciback 0000:04:00.5: added config field at offset 0x20 [ 1.322272] pciback 0000:04:00.5: added config field at offset 0x24 [ 1.322274] pciback 0000:04:00.5: added config field at offset 0x30 [ 1.322299] pciback 0000:04:00.5: Found capability 0x1 at 0x78 [ 1.322301] pciback 0000:04:00.5: added config field at offset 0x78 [ 1.322302] pciback 0000:04:00.5: added config field at offset 0x7a [ 1.322306] pciback 0000:04:00.5: added config field at offset 0x7c [ 1.322308] pciback 0000:04:00.5: added config field at offset 0x7e [ 1.322310] pciback 0000:04:00.5: added config field at offset 0x7f [ 1.322311] pciback 0000:04:00.5: enabling device [ 1.322317] xen: registering gsi 42 triggering 0 polarity 1 [ 1.322320] xen: --> pirq=42 -> irq=42 [ 1.322333] pciback 0000:04:00.5: PCI INT C -> GSI 42 (level, low) -> IRQ 42 [ 1.322337] pciback 0000:04:00.5: reset device [ 1.322343] pciback 0000:04:00.5: PCI INT C disabled [ 1.322347] pciback 0000:04:00.4: initializing... [ 1.322349] pciback 0000:04:00.4: initializing config [ 1.322351] pciback 0000:04:00.4: initializing virtual configuration space [ 1.322360] pciback 0000:04:00.4: added config field at offset 0x00 [ 1.322361] pciback 0000:04:00.4: added config field at offset 0x02 [ 1.322363] pciback 0000:04:00.4: added config field at offset 0x04 [ 1.322365] pciback 0000:04:00.4: added config field at offset 0x3c [ 1.322367] pciback 0000:04:00.4: added config field at offset 0x3d [ 1.322368] pciback 0000:04:00.4: added config field at offset 0x0c [ 1.322370] pciback 0000:04:00.4: added config field at offset 0x0d [ 1.322372] pciback 0000:04:00.4: added config field at offset 0x0f [ 1.322374] pciback 0000:04:00.4: added config field at offset 0x10 [ 1.322375] pciback 0000:04:00.4: added config field at offset 0x14 [ 1.322377] pciback 0000:04:00.4: added config field at offset 0x18 [ 1.322379] pciback 0000:04:00.4: added config field at offset 0x1c [ 1.322380] pciback 0000:04:00.4: added config field at offset 0x20 [ 1.322382] pciback 0000:04:00.4: added config field at offset 0x24 [ 1.322384] pciback 0000:04:00.4: added config field at offset 0x30 [ 1.322409] pciback 0000:04:00.4: Found capability 0x1 at 0x78 [ 1.322410] pciback 0000:04:00.4: added config field at offset 0x78 [ 1.322412] pciback 0000:04:00.4: added config field at offset 0x7a [ 1.322415] pciback 0000:04:00.4: added config field at offset 0x7c [ 1.322417] pciback 0000:04:00.4: added config field at offset 0x7e [ 1.322419] pciback 0000:04:00.4: added config field at offset 0x7f [ 1.322421] pciback 0000:04:00.4: enabling device [ 1.322426] xen: registering gsi 42 triggering 0 polarity 1 [ 1.322428] xen_map_pirq_gsi: returning irq 42 for gsi 42 [ 1.322430] xen: --> pirq=42 -> irq=42 [ 1.322432] Already setup the GSI :42 [ 1.322435] pciback 0000:04:00.4: PCI INT C -> GSI 42 (level, low) -> IRQ 42 [ 1.322437] pciback 0000:04:00.4: reset device [ 1.322450] pciback 0000:04:00.4: PCI INT C disabled [ 1.322455] pciback 0000:04:00.3: initializing... [ 1.322456] pciback 0000:04:00.3: initializing config [ 1.322458] pciback 0000:04:00.3: initializing virtual configuration space [ 1.322460] pciback 0000:04:00.3: added config field at offset 0x00 [ 1.322461] pciback 0000:04:00.3: added config field at offset 0x02 [ 1.322463] pciback 0000:04:00.3: added config field at offset 0x04 [ 1.322465] pciback 0000:04:00.3: added config field at offset 0x3c [ 1.322467] pciback 0000:04:00.3: added config field at offset 0x3d [ 1.322468] pciback 0000:04:00.3: added config field at offset 0x0c [ 1.322470] pciback 0000:04:00.3: added config field at offset 0x0d [ 1.322472] pciback 0000:04:00.3: added config field at offset 0x0f [ 1.322474] pciback 0000:04:00.3: added config field at offset 0x10 [ 1.322475] pciback 0000:04:00.3: added config field at offset 0x14 [ 1.322477] pciback 0000:04:00.3: added config field at offset 0x18 [ 1.322479] pciback 0000:04:00.3: added config field at offset 0x1c [ 1.322481] pciback 0000:04:00.3: added config field at offset 0x20 [ 1.322482] pciback 0000:04:00.3: added config field at offset 0x24 [ 1.322484] pciback 0000:04:00.3: added config field at offset 0x30 [ 1.322509] pciback 0000:04:00.3: Found capability 0x1 at 0x78 [ 1.322511] pciback 0000:04:00.3: added config field at offset 0x78 [ 1.322512] pciback 0000:04:00.3: added config field at offset 0x7a [ 1.322516] pciback 0000:04:00.3: added config field at offset 0x7c [ 1.322519] pciback 0000:04:00.3: added config field at offset 0x7e [ 1.322521] pciback 0000:04:00.3: added config field at offset 0x7f [ 1.322523] pciback 0000:04:00.3: enabling device [ 1.322535] xen: registering gsi 41 triggering 0 polarity 1 [ 1.322539] xen: --> pirq=41 -> irq=41 [ 1.322551] pciback 0000:04:00.3: PCI INT B -> GSI 41 (level, low) -> IRQ 41 [ 1.322554] pciback 0000:04:00.3: reset device [ 1.322561] pciback 0000:04:00.3: PCI INT B disabled [ 1.322565] pciback 0000:04:00.2: initializing... [ 1.322567] pciback 0000:04:00.2: initializing config [ 1.322569] pciback 0000:04:00.2: initializing virtual configuration space [ 1.322570] pciback 0000:04:00.2: added config field at offset 0x00 [ 1.322572] pciback 0000:04:00.2: added config field at offset 0x02 [ 1.322574] pciback 0000:04:00.2: added config field at offset 0x04 [ 1.322576] pciback 0000:04:00.2: added config field at offset 0x3c [ 1.322577] pciback 0000:04:00.2: added config field at offset 0x3d [ 1.322579] pciback 0000:04:00.2: added config field at offset 0x0c [ 1.322581] pciback 0000:04:00.2: added config field at offset 0x0d [ 1.322583] pciback 0000:04:00.2: added config field at offset 0x0f [ 1.322585] pciback 0000:04:00.2: added config field at offset 0x10 [ 1.322586] pciback 0000:04:00.2: added config field at offset 0x14 [ 1.322588] pciback 0000:04:00.2: added config field at offset 0x18 [ 1.322590] pciback 0000:04:00.2: added config field at offset 0x1c [ 1.322592] pciback 0000:04:00.2: added config field at offset 0x20 [ 1.322593] pciback 0000:04:00.2: added config field at offset 0x24 [ 1.322595] pciback 0000:04:00.2: added config field at offset 0x30 [ 1.322627] pciback 0000:04:00.2: Found capability 0x1 at 0x78 [ 1.322629] pciback 0000:04:00.2: added config field at offset 0x78 [ 1.322631] pciback 0000:04:00.2: added config field at offset 0x7a [ 1.322634] pciback 0000:04:00.2: added config field at offset 0x7c [ 1.322636] pciback 0000:04:00.2: added config field at offset 0x7e [ 1.322638] pciback 0000:04:00.2: added config field at offset 0x7f [ 1.322639] pciback 0000:04:00.2: enabling device [ 1.322645] xen: registering gsi 41 triggering 0 polarity 1 [ 1.322647] xen_map_pirq_gsi: returning irq 41 for gsi 41 [ 1.322649] xen: --> pirq=41 -> irq=41 [ 1.322651] Already setup the GSI :41 [ 1.322654] pciback 0000:04:00.2: PCI INT B -> GSI 41 (level, low) -> IRQ 41 [ 1.322657] pciback 0000:04:00.2: reset device [ 1.322662] pciback 0000:04:00.2: PCI INT B disabled [ 1.322667] pciback 0000:04:00.1: initializing... [ 1.322669] pciback 0000:04:00.1: initializing config [ 1.322670] pciback 0000:04:00.1: initializing virtual configuration space [ 1.322672] pciback 0000:04:00.1: added config field at offset 0x00 [ 1.322674] pciback 0000:04:00.1: added config field at offset 0x02 [ 1.322676] pciback 0000:04:00.1: added config field at offset 0x04 [ 1.322677] pciback 0000:04:00.1: added config field at offset 0x3c [ 1.322679] pciback 0000:04:00.1: added config field at offset 0x3d [ 1.322681] pciback 0000:04:00.1: added config field at offset 0x0c [ 1.322682] pciback 0000:04:00.1: added config field at offset 0x0d [ 1.322684] pciback 0000:04:00.1: added config field at offset 0x0f [ 1.322686] pciback 0000:04:00.1: added config field at offset 0x10 [ 1.322688] pciback 0000:04:00.1: added config field at offset 0x14 [ 1.322690] pciback 0000:04:00.1: added config field at offset 0x18 [ 1.322691] pciback 0000:04:00.1: added config field at offset 0x1c [ 1.322693] pciback 0000:04:00.1: added config field at offset 0x20 [ 1.322695] pciback 0000:04:00.1: added config field at offset 0x24 [ 1.322697] pciback 0000:04:00.1: added config field at offset 0x30 [ 1.322728] pciback 0000:04:00.1: Found capability 0x1 at 0x78 [ 1.322730] pciback 0000:04:00.1: added config field at offset 0x78 [ 1.322732] pciback 0000:04:00.1: added config field at offset 0x7a [ 1.322735] pciback 0000:04:00.1: added config field at offset 0x7c [ 1.322737] pciback 0000:04:00.1: added config field at offset 0x7e [ 1.322739] pciback 0000:04:00.1: added config field at offset 0x7f [ 1.322740] pciback 0000:04:00.1: enabling device [ 1.322746] xen: registering gsi 40 triggering 0 polarity 1 [ 1.322751] xen: --> pirq=40 -> irq=40 [ 1.322763] pciback 0000:04:00.1: PCI INT A -> GSI 40 (level, low) -> IRQ 40 [ 1.322767] pciback 0000:04:00.1: reset device [ 1.322773] pciback 0000:04:00.1: PCI INT A disabled [ 1.322778] pciback 0000:04:00.0: initializing... [ 1.322780] pciback 0000:04:00.0: initializing config [ 1.322781] pciback 0000:04:00.0: initializing virtual configuration space [ 1.322783] pciback 0000:04:00.0: added config field at offset 0x00 [ 1.322792] pciback 0000:04:00.0: added config field at offset 0x02 [ 1.322794] pciback 0000:04:00.0: added config field at offset 0x04 [ 1.322795] pciback 0000:04:00.0: added config field at offset 0x3c [ 1.322797] pciback 0000:04:00.0: added config field at offset 0x3d [ 1.322799] pciback 0000:04:00.0: added config field at offset 0x0c [ 1.322801] pciback 0000:04:00.0: added config field at offset 0x0d [ 1.322802] pciback 0000:04:00.0: added config field at offset 0x0f [ 1.322804] pciback 0000:04:00.0: added config field at offset 0x10 [ 1.322806] pciback 0000:04:00.0: added config field at offset 0x14 [ 1.322808] pciback 0000:04:00.0: added config field at offset 0x18 [ 1.322810] pciback 0000:04:00.0: added config field at offset 0x1c [ 1.322811] pciback 0000:04:00.0: added config field at offset 0x20 [ 1.322813] pciback 0000:04:00.0: added config field at offset 0x24 [ 1.322815] pciback 0000:04:00.0: added config field at offset 0x30 [ 1.322840] pciback 0000:04:00.0: Found capability 0x1 at 0x78 [ 1.322841] pciback 0000:04:00.0: added config field at offset 0x78 [ 1.322843] pciback 0000:04:00.0: added config field at offset 0x7a [ 1.322849] pciback 0000:04:00.0: added config field at offset 0x7c [ 1.322851] pciback 0000:04:00.0: added config field at offset 0x7e [ 1.322852] pciback 0000:04:00.0: added config field at offset 0x7f [ 1.322854] pciback 0000:04:00.0: enabling device [ 1.322860] xen: registering gsi 40 triggering 0 polarity 1 [ 1.322861] xen_map_pirq_gsi: returning irq 40 for gsi 40 [ 1.322864] xen: --> pirq=40 -> irq=40 [ 1.322866] Already setup the GSI :40 [ 1.322868] pciback 0000:04:00.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40 [ 1.322878] pciback 0000:04:00.0: reset device [ 1.322884] pciback 0000:04:00.0: PCI INT A disabled [ 1.322888] pciback 0000:05:00.1: initializing... [ 1.322890] pciback 0000:05:00.1: initializing config [ 1.322892] pciback 0000:05:00.1: initializing virtual configuration space [ 1.322893] pciback 0000:05:00.1: added config field at offset 0x00 [ 1.322895] pciback 0000:05:00.1: added config field at offset 0x02 [ 1.322897] pciback 0000:05:00.1: added config field at offset 0x04 [ 1.322899] pciback 0000:05:00.1: added config field at offset 0x3c [ 1.322900] pciback 0000:05:00.1: added config field at offset 0x3d [ 1.322902] pciback 0000:05:00.1: added config field at offset 0x0c [ 1.322904] pciback 0000:05:00.1: added config field at offset 0x0d [ 1.322906] pciback 0000:05:00.1: added config field at offset 0x0f [ 1.322907] pciback 0000:05:00.1: added config field at offset 0x10 [ 1.322909] pciback 0000:05:00.1: added config field at offset 0x14 [ 1.322911] pciback 0000:05:00.1: added config field at offset 0x18 [ 1.322913] pciback 0000:05:00.1: added config field at offset 0x1c [ 1.322915] pciback 0000:05:00.1: added config field at offset 0x20 [ 1.322916] pciback 0000:05:00.1: added config field at offset 0x24 [ 1.322918] pciback 0000:05:00.1: added config field at offset 0x30 [ 1.322935] pciback 0000:05:00.1: Found capability 0x1 at 0x50 [ 1.322937] pciback 0000:05:00.1: added config field at offset 0x50 [ 1.322939] pciback 0000:05:00.1: added config field at offset 0x52 [ 1.322942] pciback 0000:05:00.1: added config field at offset 0x54 [ 1.322944] pciback 0000:05:00.1: added config field at offset 0x56 [ 1.322945] pciback 0000:05:00.1: added config field at offset 0x57 [ 1.322947] pciback 0000:05:00.1: enabling device [ 1.322952] xen: registering gsi 33 triggering 0 polarity 1 [ 1.322956] xen: --> pirq=33 -> irq=33 [ 1.323002] pciback 0000:05:00.1: PCI INT B -> GSI 33 (level, low) -> IRQ 33 [ 1.323006] pciback 0000:05:00.1: reset device [ 1.323011] pciback 0000:05:00.1: PCI INT B disabled [ 1.323016] pciback 0000:05:00.0: initializing... [ 1.323017] pciback 0000:05:00.0: initializing config [ 1.323019] pciback 0000:05:00.0: initializing virtual configuration space [ 1.323021] pciback 0000:05:00.0: added config field at offset 0x00 [ 1.323023] pciback 0000:05:00.0: added config field at offset 0x02 [ 1.323024] pciback 0000:05:00.0: added config field at offset 0x04 [ 1.323026] pciback 0000:05:00.0: added config field at offset 0x3c [ 1.323028] pciback 0000:05:00.0: added config field at offset 0x3d [ 1.323030] pciback 0000:05:00.0: added config field at offset 0x0c [ 1.323031] pciback 0000:05:00.0: added config field at offset 0x0d [ 1.323033] pciback 0000:05:00.0: added config field at offset 0x0f [ 1.323035] pciback 0000:05:00.0: added config field at offset 0x10 [ 1.323037] pciback 0000:05:00.0: added config field at offset 0x14 [ 1.323038] pciback 0000:05:00.0: added config field at offset 0x18 [ 1.323040] pciback 0000:05:00.0: added config field at offset 0x1c [ 1.323042] pciback 0000:05:00.0: added config field at offset 0x20 [ 1.323044] pciback 0000:05:00.0: added config field at offset 0x24 [ 1.323045] pciback 0000:05:00.0: added config field at offset 0x30 [ 1.323062] pciback 0000:05:00.0: Found capability 0x1 at 0x50 [ 1.323064] pciback 0000:05:00.0: added config field at offset 0x50 [ 1.323066] pciback 0000:05:00.0: added config field at offset 0x52 [ 1.323069] pciback 0000:05:00.0: added config field at offset 0x54 [ 1.323071] pciback 0000:05:00.0: added config field at offset 0x56 [ 1.323073] pciback 0000:05:00.0: added config field at offset 0x57 [ 1.323074] pciback 0000:05:00.0: enabling device [ 1.323079] pciback 0000:05:00.0: enabling device (0000 -> 0003) [ 1.323084] xen: registering gsi 32 triggering 0 polarity 1 [ 1.323088] xen: --> pirq=32 -> irq=32 [ 1.323110] pciback 0000:05:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32 [ 1.323113] pciback 0000:05:00.0: reset device [ 1.323122] pciback 0000:05:00.0: PCI INT A disabled [ 1.323127] pciback 0000:07:01.2: initializing... [ 1.323136] pciback 0000:07:01.2: initializing config [ 1.323137] pciback 0000:07:01.2: initializing virtual configuration space [ 1.323139] pciback 0000:07:01.2: added config field at offset 0x00 [ 1.323141] pciback 0000:07:01.2: added config field at offset 0x02 [ 1.323143] pciback 0000:07:01.2: added config field at offset 0x04 [ 1.323145] pciback 0000:07:01.2: added config field at offset 0x3c [ 1.323147] pciback 0000:07:01.2: added config field at offset 0x3d [ 1.323148] pciback 0000:07:01.2: added config field at offset 0x0c [ 1.323150] pciback 0000:07:01.2: added config field at offset 0x0d [ 1.323152] pciback 0000:07:01.2: added config field at offset 0x0f [ 1.323155] pciback 0000:07:01.2: added config field at offset 0x10 [ 1.323157] pciback 0000:07:01.2: added config field at offset 0x14 [ 1.323159] pciback 0000:07:01.2: added config field at offset 0x18 [ 1.323166] pciback 0000:07:01.2: added config field at offset 0x1c [ 1.323168] pciback 0000:07:01.2: added config field at offset 0x20 [ 1.323170] pciback 0000:07:01.2: added config field at offset 0x24 [ 1.323174] pciback 0000:07:01.2: added config field at offset 0x30 [ 1.323194] pciback 0000:07:01.2: Found capability 0x1 at 0x40 [ 1.323196] pciback 0000:07:01.2: added config field at offset 0x40 [ 1.323201] pciback 0000:07:01.2: added config field at offset 0x42 [ 1.323205] pciback 0000:07:01.2: added config field at offset 0x44 [ 1.323207] pciback 0000:07:01.2: added config field at offset 0x46 [ 1.323209] pciback 0000:07:01.2: added config field at offset 0x47 [ 1.323211] pciback 0000:07:01.2: enabling device [ 1.323226] xen: registering gsi 46 triggering 0 polarity 1 [ 1.323230] xen: --> pirq=46 -> irq=46 [ 1.323249] pciback 0000:07:01.2: PCI INT C -> GSI 46 (level, low) -> IRQ 46 [ 1.323253] pciback 0000:07:01.2: reset device [ 1.323260] pciback 0000:07:01.2: PCI INT C disabled [ 1.323266] pciback 0000:07:01.1: initializing... [ 1.323268] pciback 0000:07:01.1: initializing config [ 1.323270] pciback 0000:07:01.1: initializing virtual configuration space [ 1.323272] pciback 0000:07:01.1: added config field at offset 0x00 [ 1.323274] pciback 0000:07:01.1: added config field at offset 0x02 [ 1.323276] pciback 0000:07:01.1: added config field at offset 0x04 [ 1.323278] pciback 0000:07:01.1: added config field at offset 0x3c [ 1.323280] pciback 0000:07:01.1: added config field at offset 0x3d [ 1.323282] pciback 0000:07:01.1: added config field at offset 0x0c [ 1.323284] pciback 0000:07:01.1: added config field at offset 0x0d [ 1.323286] pciback 0000:07:01.1: added config field at offset 0x0f [ 1.323288] pciback 0000:07:01.1: added config field at offset 0x10 [ 1.323290] pciback 0000:07:01.1: added config field at offset 0x14 [ 1.323292] pciback 0000:07:01.1: added config field at offset 0x18 [ 1.323294] pciback 0000:07:01.1: added config field at offset 0x1c [ 1.323296] pciback 0000:07:01.1: added config field at offset 0x20 [ 1.323298] pciback 0000:07:01.1: added config field at offset 0x24 [ 1.323300] pciback 0000:07:01.1: added config field at offset 0x30 [ 1.323324] pciback 0000:07:01.1: Found capability 0x1 at 0x40 [ 1.323326] pciback 0000:07:01.1: added config field at offset 0x40 [ 1.323328] pciback 0000:07:01.1: added config field at offset 0x42 [ 1.323332] pciback 0000:07:01.1: added config field at offset 0x44 [ 1.323335] pciback 0000:07:01.1: added config field at offset 0x46 [ 1.323337] pciback 0000:07:01.1: added config field at offset 0x47 [ 1.323338] pciback 0000:07:01.1: enabling device [ 1.323345] xen: registering gsi 45 triggering 0 polarity 1 [ 1.323350] xen: --> pirq=45 -> irq=45 [ 1.323363] pciback 0000:07:01.1: PCI INT B -> GSI 45 (level, low) -> IRQ 45 [ 1.323367] pciback 0000:07:01.1: reset device [ 1.323375] pciback 0000:07:01.1: PCI INT B disabled [ 1.323380] pciback 0000:07:01.0: initializing... [ 1.323382] pciback 0000:07:01.0: initializing config [ 1.323384] pciback 0000:07:01.0: initializing virtual configuration space [ 1.323386] pciback 0000:07:01.0: added config field at offset 0x00 [ 1.323388] pciback 0000:07:01.0: added config field at offset 0x02 [ 1.323390] pciback 0000:07:01.0: added config field at offset 0x04 [ 1.323399] pciback 0000:07:01.0: added config field at offset 0x3c [ 1.323401] pciback 0000:07:01.0: added config field at offset 0x3d [ 1.323403] pciback 0000:07:01.0: added config field at offset 0x0c [ 1.323405] pciback 0000:07:01.0: added config field at offset 0x0d [ 1.323407] pciback 0000:07:01.0: added config field at offset 0x0f [ 1.323409] pciback 0000:07:01.0: added config field at offset 0x10 [ 1.323411] pciback 0000:07:01.0: added config field at offset 0x14 [ 1.323414] pciback 0000:07:01.0: added config field at offset 0x18 [ 1.323416] pciback 0000:07:01.0: added config field at offset 0x1c [ 1.323418] pciback 0000:07:01.0: added config field at offset 0x20 [ 1.323420] pciback 0000:07:01.0: added config field at offset 0x24 [ 1.323422] pciback 0000:07:01.0: added config field at offset 0x30 [ 1.323438] pciback 0000:07:01.0: Found capability 0x1 at 0x40 [ 1.323441] pciback 0000:07:01.0: added config field at offset 0x40 [ 1.323443] pciback 0000:07:01.0: added config field at offset 0x42 [ 1.323447] pciback 0000:07:01.0: added config field at offset 0x44 [ 1.323449] pciback 0000:07:01.0: added config field at offset 0x46 [ 1.323451] pciback 0000:07:01.0: added config field at offset 0x47 [ 1.323453] pciback 0000:07:01.0: enabling device [ 1.323459] xen: registering gsi 44 triggering 0 polarity 1 [ 1.323464] xen: --> pirq=44 -> irq=44 [ 1.323484] pciback 0000:07:01.0: PCI INT A -> GSI 44 (level, low) -> IRQ 44 [ 1.323488] pciback 0000:07:01.0: reset device [ 1.323498] pciback 0000:07:01.0: PCI INT A disabled [ 1.323503] pciback 0000:0a:00.7: initializing... [ 1.323505] pciback 0000:0a:00.7: initializing config [ 1.323507] pciback 0000:0a:00.7: initializing virtual configuration space [ 1.323509] pciback 0000:0a:00.7: added config field at offset 0x00 [ 1.323511] pciback 0000:0a:00.7: added config field at offset 0x02 [ 1.323513] pciback 0000:0a:00.7: added config field at offset 0x04 [ 1.323515] pciback 0000:0a:00.7: added config field at offset 0x3c [ 1.323517] pciback 0000:0a:00.7: added config field at offset 0x3d [ 1.323519] pciback 0000:0a:00.7: added config field at offset 0x0c [ 1.323521] pciback 0000:0a:00.7: added config field at offset 0x0d [ 1.323523] pciback 0000:0a:00.7: added config field at offset 0x0f [ 1.323526] pciback 0000:0a:00.7: added config field at offset 0x10 [ 1.323528] pciback 0000:0a:00.7: added config field at offset 0x14 [ 1.323530] pciback 0000:0a:00.7: added config field at offset 0x18 [ 1.323532] pciback 0000:0a:00.7: added config field at offset 0x1c [ 1.323534] pciback 0000:0a:00.7: added config field at offset 0x20 [ 1.323536] pciback 0000:0a:00.7: added config field at offset 0x24 [ 1.323540] pciback 0000:0a:00.7: added config field at offset 0x30 [ 1.323573] pciback 0000:0a:00.7: Found capability 0x1 at 0x78 [ 1.323575] pciback 0000:0a:00.7: added config field at offset 0x78 [ 1.323577] pciback 0000:0a:00.7: added config field at offset 0x7a [ 1.323581] pciback 0000:0a:00.7: added config field at offset 0x7c [ 1.323583] pciback 0000:0a:00.7: added config field at offset 0x7e [ 1.323585] pciback 0000:0a:00.7: added config field at offset 0x7f [ 1.323587] pciback 0000:0a:00.7: enabling device [ 1.323594] xen: registering gsi 31 triggering 0 polarity 1 [ 1.323598] xen: --> pirq=31 -> irq=31 [ 1.323611] pciback 0000:0a:00.7: PCI INT D -> GSI 31 (level, low) -> IRQ 31 [ 1.323615] pciback 0000:0a:00.7: reset device [ 1.323622] pciback 0000:0a:00.7: PCI INT D disabled [ 1.323627] pciback 0000:0a:00.6: initializing... [ 1.323629] pciback 0000:0a:00.6: initializing config [ 1.323631] pciback 0000:0a:00.6: initializing virtual configuration space [ 1.323633] pciback 0000:0a:00.6: added config field at offset 0x00 [ 1.323635] pciback 0000:0a:00.6: added config field at offset 0x02 [ 1.323637] pciback 0000:0a:00.6: added config field at offset 0x04 [ 1.323639] pciback 0000:0a:00.6: added config field at offset 0x3c [ 1.323641] pciback 0000:0a:00.6: added config field at offset 0x3d [ 1.323648] pciback 0000:0a:00.6: added config field at offset 0x0c [ 1.323649] pciback 0000:0a:00.6: added config field at offset 0x0d [ 1.323658] pciback 0000:0a:00.6: added config field at offset 0x0f [ 1.323663] pciback 0000:0a:00.6: added config field at offset 0x10 [ 1.323665] pciback 0000:0a:00.6: added config field at offset 0x14 [ 1.323666] pciback 0000:0a:00.6: added config field at offset 0x18 [ 1.323668] pciback 0000:0a:00.6: added config field at offset 0x1c [ 1.323670] pciback 0000:0a:00.6: added config field at offset 0x20 [ 1.323672] pciback 0000:0a:00.6: added config field at offset 0x24 [ 1.323673] pciback 0000:0a:00.6: added config field at offset 0x30 [ 1.323699] pciback 0000:0a:00.6: Found capability 0x1 at 0x78 [ 1.323701] pciback 0000:0a:00.6: added config field at offset 0x78 [ 1.323702] pciback 0000:0a:00.6: added config field at offset 0x7a [ 1.323706] pciback 0000:0a:00.6: added config field at offset 0x7c [ 1.323708] pciback 0000:0a:00.6: added config field at offset 0x7e [ 1.323710] pciback 0000:0a:00.6: added config field at offset 0x7f [ 1.323711] pciback 0000:0a:00.6: enabling device [ 1.323717] xen: registering gsi 31 triggering 0 polarity 1 [ 1.323719] xen_map_pirq_gsi: returning irq 31 for gsi 31 [ 1.323721] xen: --> pirq=31 -> irq=31 [ 1.323723] Already setup the GSI :31 [ 1.323726] pciback 0000:0a:00.6: PCI INT D -> GSI 31 (level, low) -> IRQ 31 [ 1.323729] pciback 0000:0a:00.6: reset device [ 1.323734] pciback 0000:0a:00.6: PCI INT D disabled [ 1.323746] pciback 0000:0a:00.5: initializing... [ 1.323747] pciback 0000:0a:00.5: initializing config [ 1.323749] pciback 0000:0a:00.5: initializing virtual configuration space [ 1.323751] pciback 0000:0a:00.5: added config field at offset 0x00 [ 1.323752] pciback 0000:0a:00.5: added config field at offset 0x02 [ 1.323754] pciback 0000:0a:00.5: added config field at offset 0x04 [ 1.323756] pciback 0000:0a:00.5: added config field at offset 0x3c [ 1.323758] pciback 0000:0a:00.5: added config field at offset 0x3d [ 1.323759] pciback 0000:0a:00.5: added config field at offset 0x0c [ 1.323761] pciback 0000:0a:00.5: added config field at offset 0x0d [ 1.323763] pciback 0000:0a:00.5: added config field at offset 0x0f [ 1.323765] pciback 0000:0a:00.5: added config field at offset 0x10 [ 1.323766] pciback 0000:0a:00.5: added config field at offset 0x14 [ 1.323768] pciback 0000:0a:00.5: added config field at offset 0x18 [ 1.323770] pciback 0000:0a:00.5: added config field at offset 0x1c [ 1.323772] pciback 0000:0a:00.5: added config field at offset 0x20 [ 1.323774] pciback 0000:0a:00.5: added config field at offset 0x24 [ 1.323775] pciback 0000:0a:00.5: added config field at offset 0x30 [ 1.323801] pciback 0000:0a:00.5: Found capability 0x1 at 0x78 [ 1.323802] pciback 0000:0a:00.5: added config field at offset 0x78 [ 1.323804] pciback 0000:0a:00.5: added config field at offset 0x7a [ 1.323808] pciback 0000:0a:00.5: added config field at offset 0x7c [ 1.323810] pciback 0000:0a:00.5: added config field at offset 0x7e [ 1.323811] pciback 0000:0a:00.5: added config field at offset 0x7f [ 1.323813] pciback 0000:0a:00.5: enabling device [ 1.323818] xen: registering gsi 30 triggering 0 polarity 1 [ 1.323822] xen: --> pirq=30 -> irq=30 [ 1.323841] pciback 0000:0a:00.5: PCI INT C -> GSI 30 (level, low) -> IRQ 30 [ 1.323844] pciback 0000:0a:00.5: reset device [ 1.323850] pciback 0000:0a:00.5: PCI INT C disabled [ 1.323855] pciback 0000:0a:00.4: initializing... [ 1.323857] pciback 0000:0a:00.4: initializing config [ 1.323859] pciback 0000:0a:00.4: initializing virtual configuration space [ 1.323861] pciback 0000:0a:00.4: added config field at offset 0x00 [ 1.323862] pciback 0000:0a:00.4: added config field at offset 0x02 [ 1.323864] pciback 0000:0a:00.4: added config field at offset 0x04 [ 1.323866] pciback 0000:0a:00.4: added config field at offset 0x3c [ 1.323868] pciback 0000:0a:00.4: added config field at offset 0x3d [ 1.323869] pciback 0000:0a:00.4: added config field at offset 0x0c [ 1.323871] pciback 0000:0a:00.4: added config field at offset 0x0d [ 1.323873] pciback 0000:0a:00.4: added config field at offset 0x0f [ 1.323875] pciback 0000:0a:00.4: added config field at offset 0x10 [ 1.323877] pciback 0000:0a:00.4: added config field at offset 0x14 [ 1.323879] pciback 0000:0a:00.4: added config field at offset 0x18 [ 1.323881] pciback 0000:0a:00.4: added config field at offset 0x1c [ 1.323883] pciback 0000:0a:00.4: added config field at offset 0x20 [ 1.323886] pciback 0000:0a:00.4: added config field at offset 0x24 [ 1.323888] pciback 0000:0a:00.4: added config field at offset 0x30 [ 1.323921] pciback 0000:0a:00.4: Found capability 0x1 at 0x78 [ 1.323922] pciback 0000:0a:00.4: added config field at offset 0x78 [ 1.323924] pciback 0000:0a:00.4: added config field at offset 0x7a [ 1.323928] pciback 0000:0a:00.4: added config field at offset 0x7c [ 1.323930] pciback 0000:0a:00.4: added config field at offset 0x7e [ 1.323932] pciback 0000:0a:00.4: added config field at offset 0x7f [ 1.323933] pciback 0000:0a:00.4: enabling device [ 1.323939] xen: registering gsi 30 triggering 0 polarity 1 [ 1.323941] xen_map_pirq_gsi: returning irq 30 for gsi 30 [ 1.323943] xen: --> pirq=30 -> irq=30 [ 1.323945] Already setup the GSI :30 [ 1.323948] pciback 0000:0a:00.4: PCI INT C -> GSI 30 (level, low) -> IRQ 30 [ 1.323951] pciback 0000:0a:00.4: reset device [ 1.323957] pciback 0000:0a:00.4: PCI INT C disabled [ 1.323961] pciback 0000:0a:00.3: initializing... [ 1.323963] pciback 0000:0a:00.3: initializing config [ 1.323964] pciback 0000:0a:00.3: initializing virtual configuration space [ 1.323966] pciback 0000:0a:00.3: added config field at offset 0x00 [ 1.323968] pciback 0000:0a:00.3: added config field at offset 0x02 [ 1.323970] pciback 0000:0a:00.3: added config field at offset 0x04 [ 1.323972] pciback 0000:0a:00.3: added config field at offset 0x3c [ 1.323973] pciback 0000:0a:00.3: added config field at offset 0x3d [ 1.323975] pciback 0000:0a:00.3: added config field at offset 0x0c [ 1.323977] pciback 0000:0a:00.3: added config field at offset 0x0d [ 1.323979] pciback 0000:0a:00.3: added config field at offset 0x0f [ 1.323981] pciback 0000:0a:00.3: added config field at offset 0x10 [ 1.323982] pciback 0000:0a:00.3: added config field at offset 0x14 [ 1.323984] pciback 0000:0a:00.3: added config field at offset 0x18 [ 1.323986] pciback 0000:0a:00.3: added config field at offset 0x1c [ 1.323988] pciback 0000:0a:00.3: added config field at offset 0x20 [ 1.323990] pciback 0000:0a:00.3: added config field at offset 0x24 [ 1.323992] pciback 0000:0a:00.3: added config field at offset 0x30 [ 1.324024] pciback 0000:0a:00.3: Found capability 0x1 at 0x78 [ 1.324026] pciback 0000:0a:00.3: added config field at offset 0x78 [ 1.324028] pciback 0000:0a:00.3: added config field at offset 0x7a [ 1.324031] pciback 0000:0a:00.3: added config field at offset 0x7c [ 1.324033] pciback 0000:0a:00.3: added config field at offset 0x7e [ 1.324035] pciback 0000:0a:00.3: added config field at offset 0x7f [ 1.324037] pciback 0000:0a:00.3: enabling device [ 1.324042] xen: registering gsi 29 triggering 0 polarity 1 [ 1.324046] xen: --> pirq=29 -> irq=29 [ 1.324058] pciback 0000:0a:00.3: PCI INT B -> GSI 29 (level, low) -> IRQ 29 [ 1.324062] pciback 0000:0a:00.3: reset device [ 1.324068] pciback 0000:0a:00.3: PCI INT B disabled [ 1.324072] pciback 0000:0a:00.2: initializing... [ 1.324074] pciback 0000:0a:00.2: initializing config [ 1.324076] pciback 0000:0a:00.2: initializing virtual configuration space [ 1.324078] pciback 0000:0a:00.2: added config field at offset 0x00 [ 1.324080] pciback 0000:0a:00.2: added config field at offset 0x02 [ 1.324081] pciback 0000:0a:00.2: added config field at offset 0x04 [ 1.324083] pciback 0000:0a:00.2: added config field at offset 0x3c [ 1.324085] pciback 0000:0a:00.2: added config field at offset 0x3d [ 1.324094] pciback 0000:0a:00.2: added config field at offset 0x0c [ 1.324096] pciback 0000:0a:00.2: added config field at offset 0x0d [ 1.324098] pciback 0000:0a:00.2: added config field at offset 0x0f [ 1.324099] pciback 0000:0a:00.2: added config field at offset 0x10 [ 1.324101] pciback 0000:0a:00.2: added config field at offset 0x14 [ 1.324103] pciback 0000:0a:00.2: added config field at offset 0x18 [ 1.324105] pciback 0000:0a:00.2: added config field at offset 0x1c [ 1.324107] pciback 0000:0a:00.2: added config field at offset 0x20 [ 1.324109] pciback 0000:0a:00.2: added config field at offset 0x24 [ 1.324111] pciback 0000:0a:00.2: added config field at offset 0x30 [ 1.324136] pciback 0000:0a:00.2: Found capability 0x1 at 0x78 [ 1.324138] pciback 0000:0a:00.2: added config field at offset 0x78 [ 1.324140] pciback 0000:0a:00.2: added config field at offset 0x7a [ 1.324144] pciback 0000:0a:00.2: added config field at offset 0x7c [ 1.324145] pciback 0000:0a:00.2: added config field at offset 0x7e [ 1.324147] pciback 0000:0a:00.2: added config field at offset 0x7f [ 1.324149] pciback 0000:0a:00.2: enabling device [ 1.324154] xen: registering gsi 29 triggering 0 polarity 1 [ 1.324156] xen_map_pirq_gsi: returning irq 29 for gsi 29 [ 1.324159] xen: --> pirq=29 -> irq=29 [ 1.324167] Already setup the GSI :29 [ 1.324177] pciback 0000:0a:00.2: PCI INT B -> GSI 29 (level, low) -> IRQ 29 [ 1.324180] pciback 0000:0a:00.2: reset device [ 1.324186] pciback 0000:0a:00.2: PCI INT B disabled [ 1.324191] pciback 0000:0a:00.1: initializing... [ 1.324193] pciback 0000:0a:00.1: initializing config [ 1.324194] pciback 0000:0a:00.1: initializing virtual configuration space [ 1.324196] pciback 0000:0a:00.1: added config field at offset 0x00 [ 1.324198] pciback 0000:0a:00.1: added config field at offset 0x02 [ 1.324200] pciback 0000:0a:00.1: added config field at offset 0x04 [ 1.324201] pciback 0000:0a:00.1: added config field at offset 0x3c [ 1.324203] pciback 0000:0a:00.1: added config field at offset 0x3d [ 1.324205] pciback 0000:0a:00.1: added config field at offset 0x0c [ 1.324207] pciback 0000:0a:00.1: added config field at offset 0x0d [ 1.324209] pciback 0000:0a:00.1: added config field at offset 0x0f [ 1.324210] pciback 0000:0a:00.1: added config field at offset 0x10 [ 1.324212] pciback 0000:0a:00.1: added config field at offset 0x14 [ 1.324214] pciback 0000:0a:00.1: added config field at offset 0x18 [ 1.324219] pciback 0000:0a:00.1: added config field at offset 0x1c [ 1.324220] pciback 0000:0a:00.1: added config field at offset 0x20 [ 1.324224] pciback 0000:0a:00.1: added config field at offset 0x24 [ 1.324225] pciback 0000:0a:00.1: added config field at offset 0x30 [ 1.324251] pciback 0000:0a:00.1: Found capability 0x1 at 0x78 [ 1.324253] pciback 0000:0a:00.1: added config field at offset 0x78 [ 1.324255] pciback 0000:0a:00.1: added config field at offset 0x7a [ 1.324265] pciback 0000:0a:00.1: added config field at offset 0x7c [ 1.324267] pciback 0000:0a:00.1: added config field at offset 0x7e [ 1.324269] pciback 0000:0a:00.1: added config field at offset 0x7f [ 1.324270] pciback 0000:0a:00.1: enabling device [ 1.324276] xen: registering gsi 28 triggering 0 polarity 1 [ 1.324280] xen: --> pirq=28 -> irq=28 [ 1.324292] pciback 0000:0a:00.1: PCI INT A -> GSI 28 (level, low) -> IRQ 28 [ 1.324296] pciback 0000:0a:00.1: reset device [ 1.324304] pciback 0000:0a:00.1: PCI INT A disabled [ 1.324309] pciback 0000:0a:00.0: initializing... [ 1.324311] pciback 0000:0a:00.0: initializing config [ 1.324312] pciback 0000:0a:00.0: initializing virtual configuration space [ 1.324314] pciback 0000:0a:00.0: added config field at offset 0x00 [ 1.324316] pciback 0000:0a:00.0: added config field at offset 0x02 [ 1.324318] pciback 0000:0a:00.0: added config field at offset 0x04 [ 1.324320] pciback 0000:0a:00.0: added config field at offset 0x3c [ 1.324321] pciback 0000:0a:00.0: added config field at offset 0x3d [ 1.324323] pciback 0000:0a:00.0: added config field at offset 0x0c [ 1.324325] pciback 0000:0a:00.0: added config field at offset 0x0d [ 1.324327] pciback 0000:0a:00.0: added config field at offset 0x0f [ 1.324329] pciback 0000:0a:00.0: added config field at offset 0x10 [ 1.324330] pciback 0000:0a:00.0: added config field at offset 0x14 [ 1.324332] pciback 0000:0a:00.0: added config field at offset 0x18 [ 1.324334] pciback 0000:0a:00.0: added config field at offset 0x1c [ 1.324336] pciback 0000:0a:00.0: added config field at offset 0x20 [ 1.324338] pciback 0000:0a:00.0: added config field at offset 0x24 [ 1.324340] pciback 0000:0a:00.0: added config field at offset 0x30 [ 1.324395] pciback 0000:0a:00.0: Found capability 0x1 at 0x78 [ 1.324397] pciback 0000:0a:00.0: added config field at offset 0x78 [ 1.324399] pciback 0000:0a:00.0: added config field at offset 0x7a [ 1.324402] pciback 0000:0a:00.0: added config field at offset 0x7c [ 1.324404] pciback 0000:0a:00.0: added config field at offset 0x7e [ 1.324406] pciback 0000:0a:00.0: added config field at offset 0x7f [ 1.324408] pciback 0000:0a:00.0: enabling device [ 1.324413] xen: registering gsi 28 triggering 0 polarity 1 [ 1.324415] xen_map_pirq_gsi: returning irq 28 for gsi 28 [ 1.324418] xen: --> pirq=28 -> irq=28 [ 1.324419] Already setup the GSI :28 [ 1.324422] pciback 0000:0a:00.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28 [ 1.324425] pciback 0000:0a:00.0: reset device [ 1.324431] pciback 0000:0a:00.0: PCI INT A disabled [ 1.324930] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.324937] ACPI: Power Button [PWRB] [ 1.325008] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.325013] ACPI: Power Button [PWRF] [ 1.325284] ACPI: acpi_idle registered with cpuidle [ 1.445164] Event-channel device installed. [ 1.446222] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.764597] Non-volatile memory driver v1.3 [ 1.764677] Linux agpgart interface v0.103 [ 1.767449] brd: module loaded [ 1.809702] loop: module loaded [ 1.810672] ahci 0000:00:11.0: version 3.0 [ 1.810687] xen: registering gsi 19 triggering 0 polarity 1 [ 1.810700] xen: --> pirq=19 -> irq=19 [ 1.810760] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.811014] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 1.811021] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 1.813029] scsi0 : ahci [ 1.813220] scsi1 : ahci [ 1.813389] scsi2 : ahci [ 1.813564] scsi3 : ahci [ 1.813768] ata1: SATA max UDMA/133 abar m1024@0xf98ff000 port 0xf98ff100 irq 336 [ 1.813773] ata2: SATA max UDMA/133 abar m1024@0xf98ff000 port 0xf98ff180 irq 336 [ 1.813777] ata3: SATA max UDMA/133 abar m1024@0xf98ff000 port 0xf98ff200 irq 336 [ 1.813781] ata4: SATA max UDMA/133 abar m1024@0xf98ff000 port 0xf98ff280 irq 336 [ 1.814437] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 1.814447] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.814517] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2 [ 1.814520] e1000e: Copyright(c) 1999 - 2011 Intel Corporation. [ 1.814595] Intel(R) Gigabit Ethernet Network Driver - version 3.0.6-k2 [ 1.814598] Copyright (c) 2007-2011 Intel Corporation. [ 1.814675] Intel(R) Virtual Function Network Driver - version 1.0.8-k0 [ 1.814679] Copyright (c) 2009 - 2010 Intel Corporation. [ 1.814865] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.814868] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.815117] sky2: driver version 1.28 [ 1.815812] tun: Universal TUN/TAP device driver, 1.6 [ 1.815816] tun: (C) 1999-2004 Max Krasnyansky [ 1.815938] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.815958] xen: registering gsi 46 triggering 0 polarity 1 [ 1.815962] xen_map_pirq_gsi: returning irq 46 for gsi 46 [ 1.815965] xen: --> pirq=46 -> irq=46 [ 1.815968] Already setup the GSI :46 [ 1.815973] r8169 0000:09:00.0: PCI INT A -> GSI 46 (level, low) -> IRQ 46 [ 1.815980] r8169 0000:09:00.0: enabling Mem-Wr-Inval [ 1.816019] r8169 0000:09:00.0: setting latency timer to 64 [ 1.816374] r8169 0000:09:00.0: eth0: Features changed: 0x00004980 -> 0x00004180 [ 1.816399] r8169 0000:09:00.0: eth0: RTL8168d/8111d at 0xffffc9000002e000, 40:61:86:f4:67:d9, XID 081000c0 IRQ 337 [ 1.844298] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.844329] xen: registering gsi 51 triggering 0 polarity 1 [ 1.844338] xen: --> pirq=51 -> irq=51 [ 1.844387] r8169 0000:08:00.0: PCI INT A -> GSI 51 (level, low) -> IRQ 51 [ 1.844395] r8169 0000:08:00.0: enabling Mem-Wr-Inval [ 1.844425] r8169 0000:08:00.0: setting latency timer to 64 [ 1.844762] r8169 0000:08:00.0: eth1: Features changed: 0x00004980 -> 0x00004180 [ 1.844779] r8169 0000:08:00.0: eth1: RTL8168d/8111d at 0xffffc90000036000, 40:61:86:f4:67:d8, XID 081000c0 IRQ 338 [ 1.876566] console [netcon0] enabled [ 1.876571] netconsole: network logging started [ 1.876827] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.876845] xen: registering gsi 17 triggering 0 polarity 1 [ 1.876856] xen: --> pirq=17 -> irq=17 [ 1.876908] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.876926] ehci_hcd 0000:00:12.2: enabling bus mastering [ 1.876932] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 1.877031] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.908281] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.908390] QUIRK: Enable AMD PLL fix [ 1.908405] ehci_hcd 0000:00:12.2: debug port 1 [ 1.908414] ehci_hcd 0000:00:12.2: enabling Mem-Wr-Inval [ 1.908442] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf98ff400 [ 1.920189] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.920236] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.920239] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.920243] usb usb1: Product: EHCI Host Controller [ 1.920245] usb usb1: Manufacturer: Linux 2.6.39-xen-next-2.6.39-konrad+ ehci_hcd [ 1.920248] usb usb1: SerialNumber: 0000:00:12.2 [ 1.920588] hub 1-0:1.0: USB hub found [ 1.920595] hub 1-0:1.0: 5 ports detected [ 1.920677] xen: registering gsi 17 triggering 0 polarity 1 [ 1.920680] xen_map_pirq_gsi: returning irq 17 for gsi 17 [ 1.920683] xen: --> pirq=17 -> irq=17 [ 1.920686] Already setup the GSI :17 [ 1.920688] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.920703] ehci_hcd 0000:00:13.2: enabling bus mastering [ 1.920708] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 1.920784] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.940284] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.940379] ehci_hcd 0000:00:13.2: debug port 1 [ 1.940388] ehci_hcd 0000:00:13.2: enabling Mem-Wr-Inval [ 1.940396] ehci_hcd 0000:00:13.2: irq 17, io mem 0xf98ff800 [ 1.952188] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.952234] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.952237] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.952241] usb usb2: Product: EHCI Host Controller [ 1.952243] usb usb2: Manufacturer: Linux 2.6.39-xen-next-2.6.39-konrad+ ehci_hcd [ 1.952246] usb usb2: SerialNumber: 0000:00:13.2 [ 1.952580] hub 2-0:1.0: USB hub found [ 1.952587] hub 2-0:1.0: 5 ports detected [ 1.952665] xen: registering gsi 17 triggering 0 polarity 1 [ 1.952668] xen_map_pirq_gsi: returning irq 17 for gsi 17 [ 1.952671] xen: --> pirq=17 -> irq=17 [ 1.952674] Already setup the GSI :17 [ 1.952677] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.952692] ehci_hcd 0000:00:16.2: enabling bus mastering [ 1.952697] ehci_hcd 0000:00:16.2: EHCI Host Controller [ 1.952772] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 1.976279] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.976385] ehci_hcd 0000:00:16.2: debug port 1 [ 1.976395] ehci_hcd 0000:00:16.2: enabling Mem-Wr-Inval [ 1.976402] ehci_hcd 0000:00:16.2: irq 17, io mem 0xf98ffc00 [ 1.988165] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 1.988234] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.988237] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.988241] usb usb3: Product: EHCI Host Controller [ 1.988244] usb usb3: Manufacturer: Linux 2.6.39-xen-next-2.6.39-konrad+ ehci_hcd [ 1.988248] usb usb3: SerialNumber: 0000:00:16.2 [ 1.988476] hub 3-0:1.0: USB hub found [ 1.988481] hub 3-0:1.0: 4 ports detected [ 1.988615] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.988630] xen: registering gsi 18 triggering 0 polarity 1 [ 1.988641] xen: --> pirq=18 -> irq=18 [ 1.988691] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.988710] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 1.988828] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 2.020383] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf98fb000 [ 2.080232] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.080238] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.080241] usb usb4: Product: OHCI Host Controller [ 2.080244] usb usb4: Manufacturer: Linux 2.6.39-xen-next-2.6.39-konrad+ ohci_hcd [ 2.080247] usb usb4: SerialNumber: 0000:00:12.0 [ 2.080570] hub 4-0:1.0: USB hub found [ 2.080578] hub 4-0:1.0: 5 ports detected [ 2.080655] xen: registering gsi 18 triggering 0 polarity 1 [ 2.080658] xen_map_pirq_gsi: returning irq 18 for gsi 18 [ 2.080661] xen: --> pirq=18 -> irq=18 [ 2.080664] Already setup the GSI :18 [ 2.080667] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.080683] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 2.080760] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 2.120282] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf98fc000 [ 2.132203] ata4: SATA link down (SStatus 0 SControl 300) [ 2.132255] ata2: SATA link down (SStatus 0 SControl 300) [ 2.180253] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.180259] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.180263] usb usb5: Product: OHCI Host Controller [ 2.180265] usb usb5: Manufacturer: Linux 2.6.39-xen-next-2.6.39-konrad+ ohci_hcd [ 2.180268] usb usb5: SerialNumber: 0000:00:13.0 [ 2.180463] hub 5-0:1.0: USB hub found [ 2.180470] hub 5-0:1.0: 5 ports detected [ 2.180529] xen: registering gsi 18 triggering 0 polarity 1 [ 2.180533] xen_map_pirq_gsi: returning irq 18 for gsi 18 [ 2.180535] xen: --> pirq=18 -> irq=18 [ 2.180538] Already setup the GSI :18 [ 2.180541] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.180559] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 2.180682] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6 [ 2.216345] ohci_hcd 0000:00:14.5: irq 18, io mem 0xf98fd000 [ 2.276222] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.276227] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.276231] usb usb6: Product: OHCI Host Controller [ 2.276233] usb usb6: Manufacturer: Linux 2.6.39-xen-next-2.6.39-konrad+ ohci_hcd [ 2.276237] usb usb6: SerialNumber: 0000:00:14.5 [ 2.276455] hub 6-0:1.0: USB hub found [ 2.276462] hub 6-0:1.0: 2 ports detected [ 2.276517] xen: registering gsi 18 triggering 0 polarity 1 [ 2.276520] xen_map_pirq_gsi: returning irq 18 for gsi 18 [ 2.276523] xen: --> pirq=18 -> irq=18 [ 2.276526] Already setup the GSI :18 [ 2.276528] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.276545] ohci_hcd 0000:00:16.0: OHCI Host Controller [ 2.276666] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7 [ 2.304222] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.304251] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.305694] ata1.00: ATA-8: Hitachi HDS722020ALA330, JKAOA20N, max UDMA/133 [ 2.305699] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.307268] ata1.00: configured for UDMA/133 [ 2.307407] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72202 JKAO PQ: 0 ANSI: 5 [ 2.307669] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 2.307766] sd 0:0:0:0: [sda] Write Protect is off [ 2.307771] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.307797] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.308012] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.308205] sda: detected capacity change from 0 to 2000398934016 [ 2.310651] ata3.00: ATA-7: SAMSUNG HD103UJ, 1AA01110, max UDMA7 [ 2.310657] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.313103] sda: sda1 sda2 [ 2.313580] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.316370] ohci_hcd 0000:00:16.0: irq 18, io mem 0xf98fe000 [ 2.317218] ata3.00: configured for UDMA/133 [ 2.317322] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5 [ 2.317569] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.317651] sd 2:0:0:0: [sdb] Write Protect is off [ 2.317654] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.317678] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.317716] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 2.317906] sdb: detected capacity change from 0 to 1000204886016 [ 2.326168] sdb: sdb1 [ 2.326545] sd 2:0:0:0: [sdb] Attached SCSI disk [ 2.376239] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.376246] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.376250] usb usb7: Product: OHCI Host Controller [ 2.376253] usb usb7: Manufacturer: Linux 2.6.39-xen-next-2.6.39-konrad+ ohci_hcd [ 2.376257] usb usb7: SerialNumber: 0000:00:16.0 [ 2.376452] hub 7-0:1.0: USB hub found [ 2.376459] hub 7-0:1.0: 4 ports detected [ 2.376581] uhci_hcd: USB Universal Host Controller Interface driver [ 2.376793] usbcore: registered new interface driver usblp [ 2.376796] Initializing USB Mass Storage driver... [ 2.376866] usbcore: registered new interface driver usb-storage [ 2.376869] USB Mass Storage support registered. [ 2.376941] usbcore: registered new interface driver libusual [ 2.377174] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 2.377627] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.377632] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.377971] mousedev: PS/2 mouse device common for all mice [ 2.378313] rtc_cmos 00:04: RTC can wake from S4 [ 2.408602] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 2.408643] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 2.408797] asus_atk0110: Resources not safely usable due to acpi_enforce_resources kernel parameter [ 2.409994] applesmc: supported laptop not found! [ 2.409998] applesmc: driver init failed (ret=-19)! [ 2.410488] f71805f: Unsupported Fintek device, skipping [ 2.410552] f71882fg: Found f71889ed chip at 0x600, revision 16 [ 2.410847] f71882fg f71882fg.1536: Fan: 1 is in duty-cycle mode [ 2.410850] f71882fg f71882fg.1536: Fan: 2 is in duty-cycle mode [ 2.410854] f71882fg f71882fg.1536: Fan: 3 is in duty-cycle mode [ 2.412976] i2c-core: driver [max6639] using legacy suspend method [ 2.412980] i2c-core: driver [max6639] using legacy resume method [ 2.413059] pc87360: PC8736x not detected, module not inserted [ 2.413705] via_cputemp: Not a VIA CPU [ 2.414248] wdt: Xen WatchDog Timer Driver v0.01 [ 2.414439] wdt: initialized (timeout=60s, nowayout=0) [ 2.414682] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@xxxxxxxxxx [ 2.414764] device-mapper: multipath: version 1.3.0 loaded [ 2.414768] device-mapper: multipath round-robin: version 1.0.0 loaded [ 2.414870] cpuidle: using governor ladder [ 2.414873] cpuidle: using governor menu [ 2.416740] usbcore: registered new interface driver usbhid [ 2.416743] usbhid: USB HID core driver [ 2.416775] Netfilter messages via NETLINK v0.30. [ 2.416792] nf_conntrack version 0.5.0 (4439 buckets, 17756 max) [ 2.416986] ctnetlink v0.93: registering with nfnetlink. [ 2.417085] xt_time: kernel timezone is -0000 [ 2.417141] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.417181] TCP cubic registered [ 2.417183] Initializing XFRM netlink socket [ 2.417545] NET: Registered protocol family 10 [ 2.417870] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 2.417898] IPv6 over IPv4 tunneling driver [ 2.418173] sit0: Features changed: 0x00007800 -> 0x00007000 [ 2.418246] NET: Registered protocol family 17 [ 2.418270] Bridge firewalling registered [ 2.418273] Ebtables v2.0 registered [ 2.418309] Registering the dns_resolver key type [ 2.418525] powernow-k8: Found 1 AMD Phenom(tm) II X6 1090T Processor (6 cpu cores) (version 2.20.00) [ 2.418572] powernow-k8: Core Performance Boosting: on. [ 2.418604] powernow-k8: invalid pstate 1 - bad value 1. [ 2.418607] powernow-k8: Please report to BIOS manufacturer [ 2.418610] powernow-k8: invalid pstate 2 - bad value 2. [ 2.418613] powernow-k8: Please report to BIOS manufacturer [ 2.418615] powernow-k8: invalid pstate 3 - bad value 3. [ 2.418618] powernow-k8: Please report to BIOS manufacturer [ 2.418932] [Firmware Bug]: powernow-k8: invalid powernow_table [ 2.420581] Freeing unused kernel memory: 844k freed [ 3.166723] EXT4-fs (dm-0): Ignoring delalloc option - requested data journaling mode [ 3.166822] EXT4-fs (dm-0): mounted filesystem with journalled data mode. Opts: (null) [ 4.435910] udev[2139]: starting version 164 [ 5.341759] ata1.00: configured for UDMA/133 [ 5.341768] ata1: EH complete [ 5.628435] ata1.00: configured for UDMA/133 [ 5.628444] ata1: EH complete [ 6.145271] EXT4-fs (dm-0): warning: maximal mount count reached, running e2fsck is recommended [ 6.145716] EXT4-fs (dm-0): re-mounted. Opts: barrier=1,errors=remount-ro [ 7.901028] Adding 2097148k swap on /dev/mapper/serveerstertje-swap. Priority:-1 extents:1 across:2097148k [ 8.307788] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: barrier=1,errors=remount-ro [ 9.487356] ADDRCONF(NETDEV_UP): xen_bridge: link is not ready [ 9.909668] r8169 0000:08:00.0: eth1: unable to load firmware patch rtl_nic/rtl8168d-1.fw (-2) [ 9.917596] r8169 0000:08:00.0: eth1: link down [ 9.917605] r8169 0000:08:00.0: eth1: link down [ 9.918374] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 11.594426] r8169 0000:08:00.0: eth1: link up [ 11.595123] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 11.776592] eth1: IPv6 duplicate address fe80::4261:86ff:fef4:67d8 detected! [ 26.320032] ADDRCONF(NETDEV_UP): vpn_bridge: link is not ready [ 51.732871] sshd (4862): /proc/4862/oom_adj is deprecated, please use /proc/4862/oom_score_adj instead. [ 52.286827] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: barrier=1,errors=remount-ro [ 52.688283] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: barrier=1,errors=remount-ro [ 53.057212] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: barrier=1,errors=remount-ro [ 53.606231] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: barrier=1,errors=remount-ro [ 53.834741] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: barrier=1,errors=remount-ro [ 54.198219] EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: barrier=1,errors=remount-ro [ 54.394498] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: barrier=1,errors=remount-ro [ 58.091443] XENBUS: Unable to read cpu state [ 58.091959] XENBUS: Unable to read cpu state [ 58.092082] XENBUS: Unable to read cpu state [ 58.092262] XENBUS: Unable to read cpu state [ 58.092393] XENBUS: Unable to read cpu state [ 58.092527] XENBUS: Unable to read cpu state [ 182.748222] FW: BLOCKED IGMP: IN=vpn_bridge OUT= MAC=01:00:5e:00:00:01:b6:85:05:4f:22:99:08:00 SRC=0.0.0.0 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2